rk 270 used for sale

Vibration damper, compensator, damper, expansion compensator, expansion piece, axial compensators, stainless steel compensator, steel expansion compensator, steel expansion joint -Manufacturer: SB Broneske, compensator unused -Type: SBF25.100 -Nominal diameter: Ø 270 mm -Material: Bellows stainless steel -Bolt circle: Ø 335 / 18 mm -Dimensions: Ø 375 x 260 mm -Weight: 15 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder -Manufacturer: GSL (German Standard Lift), hydraulic cylinder, stroke 270 mm -Type designation: E030ZM60279 T24 -Piston rod: Ø 30 mm -Hole: Ø 20 mm, see photos -Number: 2 cylinders available -Price: per piece -Dimensions: 470/50/H80 mm -Weight: 4 kg/pc.

Packing Line, Packing Machine, Hood Shrink Machine, Hood Shrinker, Film Wrapping Machine, Sealing Tool Sealing Tool, Tray Sealing Machine, Tray Sealer -Manufacturer: Reepack, sealing tool from tray sealing machine Inauen VC999/ TS 1200 N -Type.: 342201270 -Shell size: 270 x 170 mm -Cutting die: see photos for size -Dimensions machine: 540/520/H220 mm -Weight 49 kg

Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, screw block compressor stage from compressor type SL 270 -Screw block: type BS 430 -Final pressure: max. 15.0 bar -Hole circle: Ø 295 mm / M20 / Ø 740x22 mm -Shaft: Ø 100 x 200 mm -Dimensions: 1200/850/H790 mm -Weight: 917 kg

Compressed air tank, pressure container, pressure tank, compressed air boiler, pressure vessel, compressor tank, pressure accumulator for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, pressure accumulator with filter block from compressor type SL 270 -Pressure accumulator: Type 306022 V 230 L -Final pressure: max. 15 bar -Hole circle: Ø 240 x 22 mm -Filter units: see photos of individual components -Dimensions: 1600/980/H1270 mm -Weight: 289kg

Gate valve for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, gate valve from compressor type SL 270 -Solenoid valve: type 644.0044.01 -Final pressure: max. 14 bar -Hole circle: Ø 295 x 22 mm -Dimensions: 415/340/H440 mm -Weight: 25kg

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Boge, fan from compressor type SL 270 -Fan: Ø 420 mm -Engine: Type FC80/2 -Power: 1.1 kW / 2815 rpm -Hole circle: Ø 295 x 22 mm -Total dimensions: Ø 495 x 315 mm -Weight: 13 kg

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Boge, intake filter from compressor type SL 270 -Type: 569.0007.11 -Intake filter cartridge: 569.0007.31 -Maintenance indicator: 569000503 -Dimensions: 530/440/H850 mm -Weight: 28 kg

Screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw compressor, suction regulator relief valve, relief valve -Manufacturer: Boge, screw compressor intake regulator relief valve from compressor type SL 270 -Type: 644 0041 01 -Pressure: 0.5 - 10 bar bar -Dimensions: 195/100/H140 mm -Weight: 2.0 kg

machine spindle, precision spindle, double grinder spindle, precision spindle for belt drive, belt drive spindle -Manufacturer: GMN, grinding spindle precision spindle for belt drive -Type: TSAV 140s x 270-6212 L 260980 Overbeck 01340 -Mounting: cone on both sides Ø48/56 mm / thread M40 x 1.5 -Grinding disc holder: Ø 127 mm -Dimensions: see photo sketch -Total dimensions: Ø140 x 450 mm -Weight: 30.3 kg

Digital ruler for press brakes, bending benches, guillotine shears... Glass ruler, glass measuring rod, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, linear encoder -Manufacturer: RSF Elektronik, linear encoder from press brake HACO type PPES 30135 -Type: MSA 3502 -Measuring length: approx. 270 mm -Quantity: 2x encoders available -Price per piece -Dimensions: 500/150/H50 mm -Weight: 5.4 kg/pc.

crane block, pulley, rope pulley, steel rope pulley, rope pulley, crane, pulley block, rope pulley with pulley block, wire rope pulley block -Rope pulley: Rope pulley 1 grooved Ø 270 mm -Rope width: mm -Hole: Ø 62 mm -Quantity: 16x rope pulley available -Price: per piece -Dimensions: Ø 270 x 31 mm -Weight: 1.8 kg/piece

Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps, perforated gratings -Grid level: perforated grid 1100 x 270 mm -Total height: 75 mm -Holes: Ø 7/13 mm -Gratings: Hot-dip galvanized -Quantity: 2x grids available -Price per piece -Weight: 7 kg/piece

Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps, perforated gratings -Grid level: perforated grid 1000 x 270 mm -Total height: 75 mm -Holes: Ø 7/13 mm -Gratings: Hot-dip galvanized -Quantity: 2x grids available -Price per piece -Weight: 7 kg/piece

Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps, perforated gratings -Grid level: perforated grid 800 x 270 mm -Total height: 70 mm -Holes: Ø 8/12 mm -Gratings: Hot-dip galvanized -Quantity: 2x grids available -Price per piece -Weight: 5,8 kg/piece

Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 1200 x 270 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bridge height: 41/10 mm -Gratings: Hot-dip galvanized -Quantity: 2x grids available -Price per piece -Weight: 9,3 kg/piece

rotary table, rotary indexing table, controlled rotary table, rotary indexing table, rotary indexing table, indexing table, rotary table, compact rotary table -Manufacturer: Sopap, compact rotary table -Type: Ta 160-12-270-2-D -Clamping surface: Ø 240 mm, bolt circle Ø 200 mm / M12 -Speed: 8 rpm / 12 intervals -Brake: 40 Nm -Individual components: see photos -Dimensions: 700/610/H390 mm -Weight: 212 kg

container turning device, boiler turning device, welding turning device, welding turning device, welding device, welding turntable, welding turning device -Container turning device: welding turning device -Load capacity: 5000 kg -Drive motor: SEW Eurodrive 0.37 kW -Unrolling speed: 100 to 600 mm/min right/left rotation -Roller spacing: 270 - 960 mm, rollers Ø 230 x 159 mm -Transport dimensions: 1200/740/H745 mm / 870/430/H745 mm -Weight: 378 kg / 275 kg

Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, plastering unit -buffing unit: unfortunately without type designation -Motor: Bauknecht 0.25 kW -Speed: 2840 rpm -side: adjustable -Height: adjustable -Number: 2x aggregate available -Price: per piece -Dimensions: 270/250/H480 mm -Weight: 13.6 kg

Container turning device, boiler turning device, welding turning device, welding turning device, welding turntable, welding turning device -Container turning device: Welding turning device on rail chassis -Drive motor: 0.55 kW / adjustment motor 0.085 kW -Load capacity: 5000 kg -Roller spacing: 270 - 870 mm, rollers Ø 230 x 150 mm total width -Unwinding speed: 0.025 to 1.0 m/min Right/left rotation, Left rotation only continuous operation -Control unit: with hand control and foot pedal -Rail width: internal dimension 940 mm -Individual components: see photos -Transport dimensions: 1020/1020/H635 mm / 1020/500/H635 mm / 600/480/H955 mm -Total weight: 844 kg

Geared motor, electric motor, electric geared motor, spur geared motor -Type: LR87/D132S4/47.58/M1/270 i 47.58 with forced cooling fan -Speed: 30.47 rpm -Power: 5.5 kW -Shaft: Ø 50 x 100 mm -Design: B3 -Protection rating: IP54 -Quantity: 1 piece available -Price: per piece -Dimensions: 885/320/H300 mm -Weight: 115 kg

Model: KR 270 R2700 Ultra Version: C4 FLR (Floor) Year of manufacture: 2017 Load capacity: 270 kg Reach: 2696 mm Weight: 1129 kg Controller: KUKA KR C4 Serial Number: 663438

Manufacturer: Nabertherm Model: RSRC 470/270/13S Year of Manufacture: 2019 Type of Machine : Large-diameter tube furnace Technical Specifications: - Maximum pipe diameter: 470 mm - Heated length: 2700 mm - Number of heating zones: 3 - Furnace chamber dimensions: 670 x 2700 x 670 mm - Maximum temperature: 1300 degrees C - Operating temperature: 1250 degrees C - Rotation control range: 1 to 5 rpm - Electrical power: approximately 120 kW - Nominal voltage: 400 VAC - Connection power: 120 kW/kVA - Outer dimensions (L x W x H): 3150 x 1560 x 1155 mm (without base frame) - Weight: under 3000 kg - Documentation: EC declaration of conformity and operating instructions included Find more here - .ucymachines/ Contact us at - sales@ucymachines

This 5-axis MAKA PM 270 X CNC processing center was manufactured in 2012. It features an impressive X-axis travel of 9000 mm and Y-axis travel of 2700 mm, designed for workpiece thicknesses up to 60 mm. The machine includes a powerful milling spindle with adjustable speeds up to 24,000 rpm and a tool magazine with 32 positions for efficient tool changes. If you are looking to get high-quality milling and drilling capabilities, consider the MAKA PM 270 X machine we have for sale. Contact us for further details.

Lg.Nr. 26090 Technical data: - Standing version - Max. operating pressure 10 bar - Pressure vessel capacity 270 l - Intake volume 585 l/min - Delivery rate 440 l/min - Compressor speed 1200 rpm - Drive 400 V / 4.0 kW - Kettle diameter approx. 600 mm - Space requirement approx. W 800 x H 1850 x D 900 mm - Weight approx. 150 kg

Manufacturer: PROFIMAT Model: 65.8/270.8 Year of Manufacture: 2007 Type of Machine :Bar Feeder Voltage: 400 V Frequency: 50/60 Hz Power: 2 kW Technical Specifications - Bar capacity range: 65.8 mm minimum to 270.8 mm maximum diameter - Drive system: Servo drive - Type series: Multi-channel bar loading magazine Find more here - .ucymachines/ Contact us at - sales@ucymachines

This 3-axis Arburg 270 C hydraulic injection moulding machine was manufactured in 2005. It features a total connected load of 54 kW and an integrated part discharge conveyor belt for efficient operation. The machine is CE marked and includes a Selogica control panel for user-friendly operation. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 270 C machine we have for sale. Contact us for further details.

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widax Kelch, face milling cutter head diameter 270 mm -Recording: Chalice 178 03 M Ø60 SK50 -Cutter head: Widia type WIDAX M45 D.250 R 13 -Number of teeth: 13 -Recording: SK50 -Dimensions: Ø 270 x 235 mm -Weight: 30.9 kg

Technical data for the shelving truss: Manufacturer: Dexion Type: HI280 The scope of delivery includes: 750x Shelf crossbar, used Suitable for: Grating floors Material colour: sendzimir galvanised Clear width: approx. 1,270 mm Z-Profile: 52 x 25 mm Number of hooks: 02 pcs. Weight | Pcs.: approx. 0.84 kg Weight | Package: approx. 630 kg General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data for the shelving truss: Manufacturer: Dexion Type: HI280 The scope of delivery includes: 01x Shelf crossbar, used Suitable for: Grating floors Material colour: sendzimir galvanised Clear width: approx. 1,270 mm Z-Profile: 52 x 25 mm Number of hooks: 02 pcs. Weight | Pcs.: approx. 0.84 kg General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Festo indexing platen, two items available, price is per item Mechanical condition: good, with traces of storage. Pneumatic condition: defective, to be redone. Weight: 30 kgs.

Suction: 660 l/min. Effective suction: 520 l/min On / switch-off: 8/10 bar container volume: 270 l voltage: 400 V / 50Hz power capacity: 4 kW turning speeds: 1025 U/min Sound power level: 69 dB dimensions: 960 x 740 x 1905 mm weight: 245 kg - Soundproof stationary piston compressor for work up to 10 bar - Smooth V-belt-driven 2-cylinder unit with two-stage compression - equipped as standard with all fittings and with rubber swinging elements - High performance refrigerated dryer with Super-Dry Technology and ECO shutdown - easily accessible condensate drain under the container The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 060215 : prompt, Zwischenverkauf v : Türkei : 9280 € : 179.1 € : 1 : Schwenkrahmen : 3160x27x0,9 mm : 20-100 m/min : 270 mm : 270 mm : 340x220 mm : rund 230 mm, quadratisch : rund 150 mm, quadratisch : rund 180 mm, quadratisch : 910 mm : 0.37 kW : 1.5 kW : 0.12 kW : 1730 mm : 770 mm : 1460 mm : 476 kg DIGITAL ANGLE READ OUT blade brush control panel swivel frame infinitely adjustable lowering with hydraulic cylinder hydraulic lifting of the saw frame quick lowering with automatic switchover to working speed using a sensor pin mech. Vice with quick clamping coolant equipment machine base chip collecting tray user manualin GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HAUSER 270 x 175 mm ist ein Kreuztisch, ausgelegt für hochpräzise Bearbeitung, mit hoher Genauigkeit und Zuverlässigkeit. Aufspannfläche 270 x 175 mm; Verfahrwege Längs 120 mm, Quer 120 mm; 4 T-Nuten, Breite 10H7 mm. Abmessungen 350 x 250 x 200 mm (L x B x H). Ermöglicht enge Toleranzen; typisch für Automotive, Uhrenindustrie, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

FOREST-LINE SERAMILL V3 270 2T ist ein Portal Fräswerk für hochpräzise Bearbeitungen, hohe Genauigkeit und Prozesszuverlässigkeit. Technische Kapazitäten: 2 Tische (Längen 3000 mm und 4000 mm, Breite 2000 mm), X-Achse 5000 mm (bei 1 Tisch), Y 3400 mm, Z 1250 mm, Achsen A ±135°/2.5° und C 360°/2.5°; Durchgang zwischen Ständern 2700 mm, max. Werkstückgewicht auf Tisch 10.000 kg. Hauptdaten: Spindelaufnahme SK50, Drehzahlen 10–6000 t/min, Spindelmotor 31 kW, Drehmoment 430 Nm, Gesamtleistungsbedarf 90 kVA; Vorschübe Achsen 1–30.000 mm/min; Eilgang X 30’000 m/min, Y 40’000 m/min, Z 30’000 m/min; Anschluss 3x 400 V 50 Hz. Ausstattung: Werkzeugmagazin 120 Plätze, Werkzeughalter 700 pce, automatische Werkzeugvermessung BLUM, Werkstücktaster M&H. Erreicht enge Toleranzen; geeignet für Automotive, Luft- und Raumfahrt, Werkzeugmaschinenbau, Medizintechnik und Uhrenindust ...

Compressor met Abac-droger Diesel-oil (1) -- Naphte (2) -- Electr (3): electric Max output: 11 bar voltage: 380 volt Volume flow rate: 653 liter/min Power imput: 5,5 hp / 4 kW Volume (L): 270 liter Length: 1575 mm Width: 680 mm Height: 1150 mm

Power: 4 kW

Key data: 250 kN, 30 mm

warehouse no.: 503725 manufacturer: ARBURG type: Allrounder 270 S 250-170 controller: SELOGICA year of construction: 2011 operation hours: 59000 h technical data clamping unit clamping force: 250 kN distance between tie-bars h x v: 270 x 270 mm size of mould plates h x v: 380 x 380 mm min. mould height: 200 mm max. open daylight: 550 mm opening stroke: 350 mm ejector stroke: 100 mm ejector force: 20 kN centering diameter of moving platen: 110 mm centering diameter of fixed platen: 110 mm technical data injection unit screw diameter: 30 mm swept volume: 85 ccm injection pressure: 2000 bar screw length: 20 l/d screw torque: 250 N injection rate into the open: 96 g/s PS number of heating zones: 4 nozzle stroke: 300 mm measures & weight measures of machine l x w x h: 3.18m x 1.43m x 1.85m total weight: 2110KG equipment included incl. Spruepicker screen ...

Brand: FAT Model No.: MOD 270 Year: 1999 Motor: Three-phase, 400V. Manual band saw with 2 cutting speeds. Cutting capacity: - Round, 90º - 220mm - Round, 45º - 170mm - Round, 60º - 90mm - Square, 90º - 215mm - Square, 45º - 170mm - Square, 60º - 90mm - Rectangular, 90º - 250x170mm - Rectangular, 45º - 170x170mm - Rectangular, 60º - 90x90mm

Key data: 2700 kN

Battenfeld HM 270/1330H/1000H / 2K machine in very good technical condition / Operating hours: approx. 10,000 h in automatic mode Year of Make: 2006 Injection unit: Screw diameter: 55 mm Injection weight: 594 g Spray pressure: 2041 bar Dosing volume: 653 ccm Clamping unit: Clamping force: 270 t Handlebar spacing: 710x710 mm Size of the clamping plates: 1030x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B4 Additional equipment: Machine in very good technical condition 2K machine with parallel horizontal injection units Central injection Operating hours: approx. 10,000 in automatic mode Total number of operating hours: 11,876 h Control with air valve Hydraulic core pull x 3 Reinforced Injection Units – Bimetal Proportional valves on injection units - precise spraying Parallel movements Injection unit 1000H Screw diameter: 50 mm ...

Offer 26288 Technical data: - Operating pressure 10 bar - Delivery rate 520 l/min - Drive 400 V / 7.5 kW - Engine speed 925 rpm - Air tank 270 L - separate refrigerant dryer BEKO - DRYPOINT type DPRA 35 AC Bj.13 - Space requirement approx. W 1600 x H 1200 x D 600 mm - Space requirement dryer approx. W 350 x H 800 x D 450 mm - Weight approx. 300 kg

: neu : ca. 4 Monate ab Auftragse : Türkei : 20200 € : 387.84 € : Schwenkrahmen : 3160 x 27 x 0,9 mm : 15 - 120 m/min : 270 mm : 270 mm : 340 x 240 mm : rund 230, quadratisch 170 : rund 150, quadratisch 100 : rund 190, quadratisch 160 : 845 mm : 1.1 kW : 1.5 kW : 2400 mm : 1900 mm : 1600 mm : 920 kg DGS 270 model is the ideal model for mass production of solid material, tube and profile. Angular cutting is available between -45°/+60° degrees. Servo feeding system with bal screw reduces cutting tolerances to zero error marning. User friendly color touch screen PLC control panel allows to save 1 cutting program that can have 10 cutting steps. Hydraulic vice Hydromechanic band tension Saw band 27 mm Feeding vice 1000 mm stroke 1 programme with 10 steps Security switch Coolant pump Touchscreen control panel The data for this ad was created with ModulMWS - the software solution of Log ...

The roll slitter type RKS is well suited for slitting narrow rolls of micro-finishing films, tape qualities as well as light abrasive materials with a roll width up to 620 mm., SWISS QUALITY MANUFACTURING, Roll width up to 320 mm and 620 mm., Unwind station for rolls up to ø750 mm., Shear cut knife system on knife shafts consisting of upper and lower knife., Variable speed drive up to 100 m/min., Rewind station for rolls up to ø500 mm., For light abrasive materials like micro-finishing films, tapes and other special qualities., Unwind station:, Unwind station for rolls up to ø750 mm., Unwinding with pneumatically expandable unwind shaft for cores with ø75 mm., Pneumatically adjustable unwind brake., Cutting system:, Shear cut knife system on knife shafts consisting of upper and lower knife for fast change of cutting width., Rewind station:, Rewind station for rolls up to ø500 mm., R ...

Year of construction: 1992-2007 PLC: Siemens S7 Blade 60-250 mm Power 1,5 KW Saw blade feed 0-20 mm / min Cutting speed: 30-170 m / min (steel) 800 - 2400 m/min (non-ferrous metals) Workspace square Max: 50 mm Work area round: 5-70 mm Supply length 5-1000 mm 5-9999 (multiple stroke) Nachschubgeschw. Max 500 mm / sec (Saw) approximate weight: 1500 kg (Magazine), approx.: 800 kg (optional) Dimensions Lxwxh (saw) about: 2500 x 1000 x 2000mm (Magazine) about: 6500mm x 1500mm x 1300mm (optional) Footprint Lxw 2500 mm x 1000 mm The machine will be overhauled on request in our House. Among other things, following points are renewed: -Conversion to Siemens S7 PLC control -Conversion on Siemens HMI Control Panel -Replacement of pneumatic feed or replacement of ball screws -Replacement of servo motor and servo inverters -Replace the inverter for the main drive of the saw - ...

Refurbished: 2018 PLC: Siemens S7 Saw blade 550 mm Engine power 11 KW Saw blade feed 0-3000 mm / min Cutting speed (SB 500 mm): 4500 m / min (SB 550 mm): 5100 m / min Square maximum work area: 170 x 170 mm Flat maximum work area: 380 x 75 mm Round maximum work area: 165 mm Supply length 10-1000 mm Nachschubgeschw. Max 350 mm / s (Saw) approximate weight: 2500 kg (Magazine) about: 1000 kg Dimensions Lxwxh (saw) about: 2800mm x 1600mm x 2200mm (Magazine) about: 3300 x 2200mm x 1800mm Footprint Lxw 6100 mm x 2200 mm The machine was overhauled 2014 in our House. Among others were renewed following points: -New PLC control -New Elgo positioning system -New electric components -New pneumatic lines -Ueberholte pneumatic components -New valve Terminal -Revision of the extraction -Overhaul Menzel minimal lubrication system -Replacing common wear parts -Overhaul of t ...

Refurbished: 2018 Year of construction: 1993-2000 PLC: Siemens S7 Blade 175-250 mm Power 1,5 KW Saw blade feed mm/min Cutting speed: 20-170 m / min (at option high speed spindle differierend) Workspace square Max: 60 mm Flat maximum work area: 40 x 80 mm Work area round: 2-70 mm Supply length 5-2000 mm Nachschubgeschw. 600 mm / sec (Saw) approximate weight: 1200 kg (Magazine), approx.: 600 kg Dimensions Lxwxh (saw) about: 3300 mm x 1000 mm x 2000mm (Magazine) about: 3900mm x 1500mm x 1300mm Footprint Lxw 4900 mm x 2000 mm The machine will be overhauled on request in our House. Among other things, following points are renewed: -Conversion to Siemens S7 -New electric components -New pneumatic lines -Ueberholte pneumatic components -New valve Terminal -Revision of the extraction -Minimum lubrication system overhaul -Replacing common wear parts -Overhaul of the lo ...

Overhaul year 2018 Year of construction 1995-2005 Saw blades Carbide / HSS 450 mm Power saw motor 5.5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed Blade (450 mm) 15-75 m / min Saw height control infinitely adjustable electronic 5 Workspace square 90° Max: 140 x 140 mm Workspace flat 90° Max: 240 x 80 mm Work area around 90° Max: 150 mm Supply length 5-9999 mm Supply AC servo max speed: 500 mm / s (Saw) approximate weight: 2100 kg Dimensions Lxwxh (saw) about: 2500mm x 1300mm x 2100mm Footprint Lxw 2500 mm x 1300 mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. Due to the construction of the sawing machine, it is possible to realize a very accurate length tolerances. The machine will be over ...

A generally overhauled rotary piston blower brand is offered: RKR/Robuschi Type: K60R. See pictures. All our overhauled blowers are equipped with new bearings and density elements. If you ask, please call.

The blower is sold in a completely overhauled way. The photos show the blower before the overhaul. All our refurbished blowers are equipped with new bearings and sealing elements.

We offer a refurbished rotary piston blower brand: RKR / Robuschi Type: K70R. See pictures. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please call.