rinsing machine used for sale

Pile feeder F535 – Vacustar separating head 4 buckles 1 knife Batch counter A56 delivery

Thank you for your interest in our used machines, which we can offer you as follows: Probat L12 roaster in top condition - little used Manufacturer: Probat Model: L 12 batch roaster Year of construction: 1995 Heating medium: Gas Capacity: approx. 5 - 12 kg/batch Dimensions: 1700x1000x2000 mm Weight: approx. 580kg Details: - Batch size up to approx. 12 kg green coffee - The roaster is installed and can be viewed in operation - Last used to roast buckwheat or pumpkin seeds - Operating instructions available in German We offer this machine for sale "as is" to the exclusion of any warranty/claims for defects or representations. from the location Germany; unpacked, without disassembly

1 of used high-speed film-only shrinkpacker - multi-packer, make KHS, type Innopack SP A-H, new 2013, operating direction right. Used to pack standard and sleek beverage cans as 2x2=4 3-lane, as well as 3x2=6, 4x2=8, 5x2=10 and 4x3=12 dual-lane. Siemens S7 controls, automatic film-splicing. Capacity upto 125 cycles/minute depending on product/configuration.

This 5-axis Mitsubishi MV2400R wire-cut EDM machine was manufactured in 2017. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 310 mm, accommodating workpieces up to 1050 × 820 × 305 mm and weighing up to 1500 kg. If you are looking to get high-quality wire-cutting capabilities, consider the Mitsubishi MV2400R machine we have for sale. Contact us for further details.

This 3-axis Wenzel LH87 was manufactured in 2010. It features an X-axis travel of 800 mm, Y-axis travel of 1500 mm, and Z-axis travel of 680 mm, with a maximum table load of 1000 kg. The machine includes a Renishaw probe system and integrated rotary indexing table. If you are looking to get high-quality measurement capabilities, consider the Wenzel LH87 CMM machine we have for sale. Contact us for further details.

This FRIMO NFPP Thermoforming Plant was manufactured in 2015. It features a powerful HOP400 press with a force of 4000 kN and a press area of 2500 x 1800 mm. The plant dimensions are 18,000 mm in length, 13,550 mm in width, and 7,510 mm in height. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO NFPP Thermoforming Plant we have for sale. Contact us for further details.

SPECIFICATIONS: Machine operation with rotating bezel diameter mm: 400 Speed m/min: 40 Installed capacity Kw: 3,7 Width adjustment with pushers Accessories: - 2 roller conveyors for the input and output area - Coil holder -Claw - Stretch film cutting machine

tube diameter: 50,8 mm wall strength: 1,0 mm square edge steel: 50 x 50 x 1 mm round bar steel: 25 x 6 mm weight of the machine ca.: 46 Kg dimensions: 0,6 x 0,4 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thermoforming machine manufactured in 2014. This FRIMO FTL 80/200 Fullflex has a total of 1,260,207 cycles and a machine weight of 18,000 kg. It features dimensions of 15,000 x 9,600 x 7,650 mm and operates at a connected load of 172 kVA. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO FTL 80/200 Fullflex machine we have for sale. Contact us for further details.

ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine was built in 2008 in Poland. The machine is used to cut pre-programmed shapes in details having a maximum thickness of 38 mm (carbon steel) or 20 mm (aluminium and stainless steel). A powerful HYPERTHERM HyPerformance HPR 130 laser source with a power of 130 A is used for the cutting process, allowing extremely precise and accurate machining to be achieved. The plasma cutting machine has a solidly built work table with a length of 6000 mm and a width of 2500 mm, which can be extended by means of an additional control panel. The plasma cutting machine is also equipped with FASTCAM CAD/CAM software for simple and effective programming of the cut shapes, and a modern HYPERTHERM EDGE CNC controller, which allows for full control of the machine. Characteristics of the ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine - working area  ...

Used spiral kneader DIOSNA, type: SP 160 D -In bakery condition- - up to 160 kg dough / approx. 100 kg flour - Condition: Good, ready for immediate use The kneader is in good used condition and is immediately ready for use. Visits and test runs are possible by arrangement.

Used dough divider KEMPER, Type: Imperator CT -In bakery condition- The machine is still being refurbished. Visits and test runs are possible by arrangement.

An internal cylindrical grinding machine Jung C8, which was modernized by Retza, is available. Grinding diameter range: 6mm-50mm, max. grinding depth: 80mm, speed: 1000rpm, machine dimensions X/Y/Z: approx. 2100mm/1400mm/1400mm, weight: approx. 2000kg. Without grinding spindle and without inverter for it. An on-site inspection is possible.

Bottle washer, make Klinger, type: Superserpende 16/0,5 Liter, for 10.400 bph nominal capacity, 16 bottles/row, with 85 mm bottle cells, runs on 0,5 lt and 0,33 lt bottles, with Siemens S5 control, can still be seen in operation.

Bottle washer, MAG, 10 bottles / row, with 80 mm plastic cells, built in 1991

A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible.

A horizontal flow-pack packaging machine Cavanna is available. An on-site inspection is possible.

Table dimensions X/Y/Z: 4800mm/3000mm, measuring range X/Y/Z: 5000mm/2600mm/2100mm, grid spacing: 50mm, travel speed: 150mm/s, weight: approx. 540kg. Documentation available. An on-site inspection is possible.

Measuring dimensions X/Y/Z: 400mm/300mm/200mm, measuring accuracy: 2.9+L/100µm, max. workpiece weight: approx. 30kg, machine dimensions X/Y/Z: approx. 1250mm/950mm/1700mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible.

Bottle washer, make O+H, type: Contitact, for 12,300 fl/h, with 80 mm bottle cells, built 1987

Labeler, make Krones, type: Vinetta 6-3-3/180, control range: 1.700 - 4.800 bph, for 0,7/0,75 lt and 1,0 lt bottles, with 2 stations for body-, shoulder- and back label, direction: right->left, built 1985

A 3D coordinate measuring machine Hexagon is available. Measuring range X/Y/Z: 2200mm/1200mm/1000mm, swiveling head: TesaStar, probing system: TP20, probe length: 50mm, probe diameter: 5mm, temperature compensation: Clima, max. measuring speed: 300mm/s, machine dimensions X/Y/Z: approx. 3600mm/3450mm/2300mm, weight: approx. 5700kg, calibration: 02/2024. Documentation available. An on-site inspection is possible.

Control Fanuc 0i-TF Main spindle: Motor spindle technology Speed (max.) 10,000 rpm Power (max.) 3.7 kW Bar passage 20 mm Travel in Z (longitudinal turning mode) 205 mm Workpiece Clamping Collet Chuck Guide Bush Synchronous Running Sub-spindle: Motor spindle technology Speed (max) 9,000 rpm Power (max.) 1.1 kW Workpiece Clamping Collet Chuck Pneumatic ejector Linear slides: Number of lathe chisel stations 6 Tool holder 12 x 12 mm Number of stations drilling rig 4 Tool drive 8,000 rpm Number of stations frontal drill quill holder 4 Tool holder Ø22 mm Residual apparatus: Number of stations 4 Tool holder Ø22 mm Tool drive 8,000 rpm Equipment/accessories: Chip Management Chip Conveyor Coolant management coolant pump with filter Raw material feed loading magazine, FMB minimag 20 Precast Removal Conveyor Belt with Drip Tray Tool holders Div. rigid and  ...

Labeler, make Krones, type: Robusta 10-4-4, for ~20.000 bph, with 10 bottle dishes, 4 grippers and 4 glue pallets, adjust to 0,2 lt, 0,33 lt., 0,5 lt. and 0,7 lt. bottles, for body, shoulder and back label, with around safety casing, with Siemens S5 control, built 1997

Labeler, make Krones, type: Universella 18-8-6. with 2 glue pumps, conveyors, sets for 0,25 lt + 0,33 lt Gastro crown cap, 0,33 lt Longneck screw cap, 0,5 lt NRW brown crown cap, 0,5 lt NRW white screw cap, 0,7 lt GDB screw cap, 0,75 lt Gastro screw cap, built 1998.

Control Heidenhain TNC 640 Speed [rpm] 18000 Travel X/Y/Z [mm] 850/600/450 Tool pick-up HSK-A63 Spindle: T Technology Motor Spindle Speed 18,000 rpm Power 15 kW Torque 79 Nm Tool holder HSK-A63 B-axis 20°/-110° NC rotary table: Technology Rotary table with torque drive C-axis 360° Clamping surface ø600 mm Table load (max.) 500 kg General: Tool magazine 30 stations Rapid traverse in X/Y/Z 50 m/min Equipment/accessories: Displacement measuring system directly in X/Y/Z (glass scales) Chip Management Chip Conveyor Coolant management IKZ system with paper belt filter and high pressure, 40 bar Workpiece Measurement Infrared Probe, Heidenhain TS 649 Tool Measurement Laser, BLUM Oil Mist Extraction Mechanical Separator Setup operation Electronic handwheel Visiport process monitoring Other equipment Spindle cooler, rinsing gun

Labeler, make Krones, type: Bonamatic 1.240-20-4-4, with 20 bottle dishes, 4 grippers and 4 glue pallets, adjust to 0,7 lt. bottles, with 3 aggregates, for body, shoulder and back label, as too for neck ring and foot label, with cam-bottom adjustment, with around safety casing, with Siemens S5 control, built 1990

Labeler, make Krones, type: Prontomatic 720-21-8-8-110 RM, for 0,7 lt GdB bottle, for 24.000 bph, for body-, shoulder- and back label, right -> left counter clockwise, with 2 heated glue pumps, built 1997

Labeler, make KHS, type: Innoket KL 2080/120-48, speed up to 50.000 bph, right-machine, for cold glue labelling, adjust to 0,33 lt. and 0,5 lt. Longneck-bottles as too 0,5 lt. NRW-bottles, with 2 aggregates for body-, shoulder- and back label, as too neck ring, with 48 bottle dishes, 5 gripper cylinder, 6 glue pallets, with steel glue roller, carousel-Ø: 2.080mm, pitch: 120 mm, with Siemens S7 control, built 2003

Handtmann vacuum filling machine with linking attachment and case holding device, type: VF50, number: 19061, year of construction: 2004, 420 V, 50 Hz, 3 Ph, 11,6 A, 4 kW, dimensions: 1030 mm x 840 mm x 1670 mm.

Robot Coupe universal machine, model: R 30 A 5400 W, serial number: N6110116511, 400 V, 50 Hz, 3 Ph, 11,6 A, volume: 30 liter, dimensions: 740 mm x 550 mm x 1230 mm.

Inpak Imola tray forming and packing machine, model: TF12, serial number: 10013124, year of construction: 2004, 380 V, 50 Hz, carton dimensions: 550 mm x 330 mm, total dimensions: 3700 mm x 1700 mm x 2000 mm.

Labeler, make Krones, type: Variomatic, for 12.000 bph, adjust to 0,5 lt. and 0,75 lt. bottles, with 3 aggregates, for Body- shoulder and back label, as too with additional label dispenser for self-adhesive labels, with around safety casing, built-on control cabinet, year of origin: 1998

Labeller, make Krones, type: Universella 600-15-8-6-130, 2 aggregates for cold glue label at body, shoulder, back; Videojet dating built 1995

Handtmann vacuum filling machine with lifter for meat bins, type: VF300B, number: 2469, 400 V, 50 Hz, 23.6 A, 9.5 kW, dimensions: 1700 mm x 1350 mm x 2000 mm.

Siemens X-ray system type Multix / Vertix Swing with generator POLYDOROS IT/S in good condition

Projection: 610 mm Installation height: 340 mm Working height: 1015 mm Table size: 600 x 500 mm Table size additional table: 220 x 500 mm Band saw blade length: 3970 mm Cutting speed, infinitely variable: 20 - 85 / 120 - 500 m/min Band saw width: 3 - 16 mm Table tiltable, 4 directions: 15° Main engine power: 1.5 kW Connected load band welder: 2.4 kVA Weight, approx.: 700 kg Equipment: - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light . LED speed indicator - Blow-out device -CE

Eyelet machine Hang 87 F, machine number 38960, 3 eyelet heads, eyelet diameter 5.5 mm, inner diameter 5 mm, waste suction device, in good condition, immediately available

M. No.: 85039 // Model: 371 Equipment / Additional information: Ø max. 15 mm Distance between drills: 60-120 mm

bore capacity in steel (diameter): 25 mm throat: 175 mm bore stroke: 50 mm : 16 mm spindle taper: ISO 30 spindle turning speed range: 50 - 3000 U/min : 380 mm : 175 mm table surface area: 700 x 180 mm connected load frequency: 230 V max. distance between table and spindle-nose: max. 320 mm total power requirement: 0,75 kW weight of the machine ca.: 150 Kg dimensions of the machine ca.: 670 x 550 x 910 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° spindle protection. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Magurit frozen block cutter, type: 074, machine number: 3587, year of construction: 1991, 380 V, maximum block size: 650 mm x 500 mm, total dimensions: 1750 mm x 900 mm x 1930 mm.

Multivac vacuum machine, type: P200, serial number: 325133, year of construction: 2022, 230 V, 50 Hz, 5 A, 0,5 kW, seal length: 305 mm, chamber dimensions: 300 mm x 270 mm, total dimensions: 370 mm x 500 mm x 310 mm. Never used.

Specifications: - Cutting length 250 mm - Cutting angle 90 ° - Cutting thickness - Normal steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate up to approx. 55 rpm - Table size W 800 x D 800 mm - Working height approx. 940 mm - Stops infinitely adjustable in length and number of degrees - Drive 400 V / 4 kW - Oil filling 50 l - E - Foot switch - Space requirement approx. W 800 x H 1250 x D 900 mm - Weight approx. 700 kg

Rex vacuum filling machine, type: RVF220 FPA, serial number: 22030190824, year of construction: 2024, 400 V, 50/60 Hz, 16 A, 4 kW, with Busch vacuum pump, total dimensions: 800 mm x 890 mm x 1970 mm. Including maintenance kit. Never used.

Grasselli mobile skinning machine, model: RST800-Piclo, serial number: W09R02IP135, year of construction: 2017, 400 V, 3 Ph, 50 Hz, 2.5 A, 1.1 kW, foot control, working width: 800 mm, total dimensions: 1050 mm x 550 mm x 1000 mm.

Folding unit GUK FA 50-2 2nd station; good condition; cleaned and tested; Inlet width 500mm; 2 folded pockets; Self-control. Folding unit GUK FA 50-2 secound unit; good condition; cleaned and checked; working witdh 500mm; two pockets; Automatic control.

bore capacity in steel (diameter): 30 mm throat: 200 mm bore stroke: 70 mm : 16 mm spindle taper: MK3 spindle turning speed range: 50 - 3000 U/min : 565 mm : 220 mm table surface area: 840 x 210 mm connected load frequency: 400 V max. distance between table and spindle-nose: max. 470 mm total power requirement: 1,1 kW weight of the machine ca.: 230 Kg dimensions of the machine ca.: 0,75 x 1,05 x 1,3 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° Recording MC 3 - B16. Drill chuck 3 - 16 mm. spindle protection. Machine stand. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Formatic mobile burger forming machine, form diameter: 35 mm, total dimensions: 1040 mm x 850 mm x 2020 mm.

Handtmann vacuum filling machine with linking attachment and case holding device, type: VF50, number: 17750, year of construction: 2004, 420 V, 50 Hz, 11,6 A, 4 kW, dimensions: 1050 mm x 880 mm x 1680 mm.

Gaser mobile coating and breading machine, model: PRACTIC-240, serial number: 5478-6209, year of construction: 2019, 230 V, 50/60 Hz, 3,9 A, 0,62 kW, s/s mesh belt, belt width: 320 mm, total dimensions: 2000 mm x 600 mm x 1630 mm.