rinsing machine used for sale

Turning diameter 320 mm Turning length 450 mm Control HEIDENHAIN Circulation diameter over slide 260 mm Travel - x 160 mm Travel - z 450 mm Speed range - main spindle 5,000 rpm Drive power - main spindle 11 / 7.5 kW Max Torque 76 / 112 Nm Turret head (x-fold) 12 pos

Pull-off machine for up to 60cm deep ovens Bakery 90x38cm We have several of these pullers in stock. New as well as used. Dimensions: 38cm Wide 90cm Long

Sleeve machine Berning Includes steam tunnel Includes heat-resistant modular belt Product diameter: 30–110 mm Sleeve length: 30–370 mm Full body: Max. 300 pieces per minute (depending on sleeve length) Suitable product materials: PP, PS, PET; HDPE Suitable sleeve materials: PET, PVC, OPS with hot melt Year of manufaturing: 2017 Function description: At an interface, the products are transferred from a conveyor belt and fed into the machine system. The incoming products run into the screw system, where they are separated. After separation, the sleeve is applied in the sleeving machine. The sleeve application is fully automatic. When the application is complete, the product is transported to the steam tunnel. In the steam tunnel, the product and sleeve material shrink until the sleeve has adapted to the contours of the product. After shrinking, the products a ...

SANDRETTO MEGA T 1200

5 Axis Lid Maho DMU 200 P Built in 2000 The machine is in very good condition. Videos under power available ! Technical data: Travel: X 1800 mm Y 2000 mm Z 1100 mm NC Round Table: Table area: 1700 x 1400mm Permissible load: 5000 kg Number of grooves: 11 Axis (swivel range) : 360 x 0.001 degrees Motor spindle: 8,000 rpm (SK50) Tool holder: SK 50 Tool changer: 60 seats Max tool weight: 20 Kg Max tool length: 450mm Max tool diameter: 110mm

Control Other Brother C00 Speed [rpm] 10000 Travel X/Y/Z [mm] 700/400/300 Tool pick-up BBT 30 Main spindle: Technology Direct Drive Speed 10,000 rpm Power (max.) 26.2 kW Torque (max.) 92 Nm Tool holder BBT 30 Work table: Clamping area 800 x 400 mm Table load (max.) 250 kg General: Tool Magazine 21 Stations Rapid traverse in X/Y/Z 50/50/56 m/min Equipment/accessories: Chip Management Chip Conveyor Coolant Management Minimum Quantity Lubrication (IKZ), Fabr. Lubrix V5 4th axle Lehmann EA-510 with counter bearing Workpiece Clamping Hydraulic, 80-210 bar Support Control Pneumatic Automation Preparation I Automatic Work Area Door (Electric) Automation Preparation II Robot Interface Oil Mist Extraction Mechanical Separator, Fabr. Sara UC1 SD Stand riser 150 mm Setup operation Electronic handwheel Further equipment transformer

For sale is a BOXMAKER® cardboard machine from Horstmann Maschinenbau for the flexible production of tailor-made shipping boxes – exactly in the required size and quantity. Your advantages at a glance: • Producing cartons "just in time" – individually controllable via touch panel • Reduction of storage costs and filling material • Reduction of shipping costs through custom-fit packaging • Less transport damage, higher customer satisfaction • Processing of continuous cardboard or sheets, complex cuts possible Ideal for industry, wholesale, fulfillment and e-commerce that want to make packaging processes more economical, sustainable and independent.

SCM fs41 elite Dressing thickness planer Planing width 410mm with 4 TERSA planer knives Two feed speeds 6 and 12m/1 400 V 3KW (4 hp ) S1 100% Dressing table length 2000mm Max chip removal of 5mm Planing shaft D=90mm Work tables made of grey cast iron Table adjustment with numerical display Pass-through height 3-230mm Slanted geared steel feed roller Breaking stop with precise round rod guide 90-45° Suction nozzle 120mm

Fully refurbished Probat UG22 with chaff cyclone. Main features: Capacity: up to 22kg of green coffee per roast (88kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase, 60Hz (other voltages by request) Gas: natural gas/LPG - modulated burner - separate Siemens motors for every function (drum, exhaust fan, cooling tray arms, cooling fan), enables to roast and cool simultaneously - speed controlled motors on the exhaust fan and drum for maximum control over the roasting process - two digital thermocouples (bean temperature and exhaust temperature) - analog thermometer in the exhaust - new control cabinet with buttons for all the functions doubled by an 10inch touch screen display - Artisan and Cropster connection through RJ45 ethernet cable/socket - new stainless steel cover - new stainless steel cooling tray sheathing - new insulation of the drum - new  ...

Grinding machine • For grinding curves and internal radii

Machine details Bearing number 1105-03191 Machine type flat grinding machine Make sit Type RP 800 Built in 1991 Control type NC Warehouse LAGER Country of origin Germany Delivery time immediately Freight base from the exhibition hall, free Technical details Grinding length 800 mm Grinding width 400 mm Workpiece height 475 mm Table length 1100 mm Table width 500 mm max. workpiece weight 700 kg Auto. Cross feed adjustable 3-50 mm/stroke Vertical delivery, 1 tick mark 0.001 - 0.06 mm Grinding wheel diameter 300 mm Grinding wheel width 50 mm Grinding wheel bore diameter 76.2 mm Connection voltage 380 V Grinding spindle motor 3.7 / 4.5 kW Total power requirement 4.5 kW Machine weight approx. 4.5 t Room requirement approx. 3500x2000x2700 mm Information Automatic delivery, - Electro-magnetic clamping plate with straight fine pole division, dimensions 800x400mm  ...

Capacity of 800 – 1000 trays per hour. 3 main brushes for cleaning, made of polyamide. 2 brushes for cleaning of perforated trays. All brushes can be adjusted individually to prolong the lifespan. Quick copuling system for the cleaning brushes. (Un-/mounting without tools). Easy fix-System for main cleaning brushes. The whole machine can be cleaned with water. External oil container with sight glass and circulation pump. Mobil scrapings container.

Slideways for die-casting machine, 2580 x 125 x 25mm, Idra, Oleopress, new The new slideways from Olepress / OP die casting come from a spare parts stock of an aluminium die casting company. They fit die casting machines like Olepress, Idra and others. See dimensions Slideways, slide rails for aluminium die casting machines, case hardened steel. The bronze bars of the die casting tables slide on these slide rails. 2580 x 125 x 25mm, bores 4 x D20/14 x 2540 x 90 If you have a UID number, we will gladly issue an invoice without VAT. You are welcome to inspect and check the goods at our premises in Austria, 3130 Herzogenburg.

1987 Krones Starmatic with many parts

Kersten K 2000, 6.6 kw/9 hp Honda four-stroke gasoline engine, electric and manual start device, stepless hydrostatic drive forward/backward 0-4 km/h, differential, wheels 4.00-8", hydraulic plug-in couplings for device drive. Front sweeper F 1000, working width approx. 1000 mm, manually swivelled left and right.

Rubbed machine Sumbel Regent 650; good condition; Working width 650mm; Material thickness 0-30mm. Down pressing machine Sumbel Regent 650; good condition; working width 650mm; thikness from 0-30mm.

Replacement columns for die-casting machine OL1500, D250x12, Oleopress, used - overhauled Special price! Attention: The current new price is certainly twice as high. In addition, we also have a new spar nut and 2 adjusting nuts in separate adverts. If you have a VAT number, we will be happy to issue you with an invoice without VAT. Second hand! The part was bought from a spare parts store of a company, it was overhouled by a specialist company, is in a very good condition and fully functional. Attention: We have not cleaned the column yet, as the fat layer is optimal for storage. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 250 x 12mm Thread fixed end 300mm lg Thread adjustable end 1160mm lg Weight approx. 2300 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250 ...

Replacement columns for die-casting machine OL1600, D250x14, Idra, new -50% Special price! Attention: The current new price is certainly twice as high. If you have a VAT number, we will be happy to issue you an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely as new and in the original packaging. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 250 x 14 mm, L 5908 mm, Thread fixed end 290mm lg Thread adjustable end ca. 1160mm lg Weight approx. 2300 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Replacement columns for aluminium die-casting machine OL2000, D285x10, Oleopress, new -50% Special price! Attention: The current new price is certainly twice as high. In addition, we also have a spar nut and 2 adjusting nuts in separate adverts. If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely new and in ist original packaging. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 285 x 10mm, L 6830mm Weight approx. 3400 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Leit & Pull Spindle Lathe "DREHMA - D410x1500mm -Demonstration machine - year 2025 -CE - Identifier -Digital display -Turning diameter over bed 410mm -Turning length 1500mm -Turning diameter over support 255mm -Turning diameter in the offset 580mm -Spindle Passage 52mm -Speed range 45-1800 rpm -Automatic longitudinal/plane feeds -Thread/Inch/Metric etc. -Tailstock Mk4 -Central lubrication -Drive power 3.5 KW -Fixed / Rotating bezel -Multifix holder with 4x inserts -Three-jaw chuck 200mm Hsbknowatv Ss Au S Tel -Four-jaw chuck 250mm -Face Plate -Lining protection -Front safety device -Coolant device -Work light -Running tip -Machine feet

self adhesive labelling machine, work direction: left-right, safety housing, 4 stations,

Machine a blocs mobile Contec SP 5 pour la fabrication des blocs, hourdis, blocs U, pavee, bordures, blocs mur etc. Max hauteur de produit 300 mm Min hauteur de produit 100 mm surface travaillant max. 1000 x 500 mm Capacité: jusqu´a 3.500 blocs 400 x 200 x 200 mm / 8-heures poste de production

Macmon M100 Universal Milling Machine with Digital Display -Feed range in steps 9-450mm/min -Horizontal 40-2000 rpm -21 spindle speeds vertical 50-2500 rpm -Spindle holder SK40 -Projection of the V-spindle approx. 100-320mm -Installation height under spindle 350mm -Vertical Head Quill 70mm -Vertical head swivels 360 degrees -Fixed angle table 215x600mm -Milling slide path transverse manual 170mm -Vertical motor/manual 310/340mm -Table travel longitudinal motor/manual 290/310mm -X-travel 310mm -Y-travel 340mm -Z-travel 170mm -Automatic feeds and rapid traverses in all 3 axes -Total power requirement 2.5kW -Spindle drive 2.2kW -Total drive 2.5kW-380V-50Hz Dimensions: LxWxH 1.5x0.7x1.5 meters / Weight 900Kg

Rated power at 50%ED: 20kVA Short-circuit current: 15kA Electrode force: 420daN Extension: 130-500mm --- Controls: RS 17 (5-times, 2-program) --- incl. additional options: - Foot switch "powerless set-up" - Tube arm Mk2, straight - Main switch - 3m connection cable with plug --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Code: 0310 Brand: ESY - ITALY Model: TSI 300 - CE Standard Saw spindle moulder with tilting blade and scoring unit for carpentry workshops, custom-made furniture, wooden doors, window frames, kitchens, plastics, composite materials and various - CE Standard Technical data: Aluminium carriage length 2000 mm Support with metric rod with 2 reference stops Max blade diameter mm 250 Hole 30 Three-phase motor 2 Hp - 4500 rpm Scoring unit Tilting blade 0-45° Parallel guide width 800 mm 2-speed spindle moulder - 3500/7000 rpm - Max tool diameter 150 mm - Shaft diameter 30 mm Overall dimensions of assembled machine mm 2100 x 1900 x 1100 h Overall dimensions for transport mm 2100 x 1100 x 1100 h Weight kg 260

Contec Mini 15 - Concrete mixing plant Mixer M 500/300 liter Capacity 4 - 9 m3 Aggregate hoppers: 2 x 2.5 m3 on a stable metal frame Belts: 2 belts integrated and attached to the aggregate hoppers

CATALOG NUMBER 6059 TECHNICAL DATA - number of horizontal spindles 2 × 20 pieces - number of vertical spindles 1 × 20 pieces - spacing of extreme spindles 610mm - spacing between spindles 32mm - stroke of the feed cylinder 60mm - max. length of the workpiece: 3400 mm - adjustment of horizontal spindles up / down, front / back - right / left adjustment of vertical spindles - possibility of working on each drilling apparatus separately - right drill - left, threaded (screwed) - 3 pneumatic clamps - engine power 4 × 1.85 kW - air demand 6-8 bar - dimensions length / width / height 4600x1180x2200mm - weight about 1500 kg Net price: PLN 18 900 Net price: 4345 euros depending on the price, 4.35 euros (Prices may vary with higher fluctuations)

Inv. Num: 5302 Type: DL 10G Producer: Profika Generated: 2011 Parameters: Control system: FANUC 0iMATE-TD Maximum rotation length: 185 mm Max turning diameter: 170 mm Maximum spindle speed: 3500 rpm Lathe length: 1980 mm Lathe width: 1420 mm Weight: 2750 kg

Long belt grinding machine, roller spacing approx. 3000 mm

Machine Type: Honing Machine Manufacturer: Pemamo Type: MDR 120 E Year of construction: 1999 / Commissioning 2003 Condition: used / very good Offer will only be sent if a complete imprint is provided! Price 2.850 Euro incl. 19% VAT Fixed Price Location Warstein , Germany Reference number M-PEM-0126 DESCRIPTION We offer you a used honing machine from the manufacturer Pemamo. Incl. adapters 1040-510 and 1040-11-20 see last picture With fine adjuster. Weight: 135kg Further dates will follow. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved

Product number: 1949U Handtmann portioning device for ground meat Type: GMD99-2 Serial number: 1189 Year of construction: 2005 Air pressure: 7 Bar Tramper denester Type: D-3100 Serial number: 002 Year of construction: 2011 Capacity: 20 - 30 cycles/min. Dye: 5x R24, 3x R15 Air pressure: 6 Bar Dimensions: 3250 x 2200 x 2000 mm Weight: 310 kg Tramper tray filling system Type: TAS01 Serial number: 001 Year of construction: 2011 Dimensions: 5200 x 850 x 1600 mm Weight: 900 kg Tramper traysealer Type: S-460 Serial number: 001 Year of construction: 2012 Trays: R15 & R24 Capacity; max 15 cycli/min. Air pressure: 6 Bar Dimensions: 3100 x 1450 x 2150 mm Including 2 tool trolleys For vacuum and gas flush Including Witt gas mixing station

This pharmaceutical grade bottle washing machine has been designed to meet the needs of the most demanding customers and to comply with international standards in order to provide high level performance along with easy access to components, all in a small footprint. This rotary washing system was developed and designed keeping in mind the high level of cleanliness required in the pharmaceutical industry. High washing and rinsing performance. Small footprint, size and utility consumption. The washing chamber is made entirely of stainless steel and is surrounded by a Plexiglass cover. Presence of an electrical panel for easy control management.

The laser WUXI CHEERON QY-LC1500-2540 FIBER was produced in 2020 by the brand Wuxi Cheeron Qingyuan Laser Technology Co. The machine is new, it was only included for a test run after the purchase. The machine uses an IPG Photonics (Germany) laser source. The 3-axis fiber optic laser cutter has a power of 1500 W and a large working area of ​​4000 x 2500 mm. The modern design of the laser guarantees many processing possibilities, thanks to the fact that it is equipped with two automatic sheet metal loading tables, a cutting chamber, a large LCD screen, and extensive equipment. Laser technical parameters: - two automatic feeding tables: 4000 x 2500 mm - cutting working surface: 4000 x 2500 mm - closed, illuminated cutting chamber, with strong gas extraction - HD cameras for viewing in the cutting chamber and external viewing of loading tables - a closed container with a control  ...

MAZAK Mega Turn 900 CNC Vertical Lathe TECHNICAL FEATURES: Year: 2018 NC Type: MAZATROL SmoothG Maximum diameter Machinable: 920 [mm] Maximum diameter Turning time: 1000 [mm] X-axis travel: 470 [mm] Z-axis travel: 876 [mm] X-axis fast feed speed: 24000 [mm/min] Y-axis fast feed speed: 24000 [mm/min] Spindle Nose: A2-15 Maximum speed Spindle: 1250 [rpm] Spindle power: 30 [kW] Spindle torque: 3655 [Nm] Maximum distance between spindle nose and turret face: 1030 [mm] Maximum weight machinable (including mandrel): 3000 [Kg] Minimum distance. between spindle nose and turret face: 154 [mm] Number of turret stations: 12 Turret Index Time: 0.4 [s/pos] Irrigation tray capacity: 516 [l] Installed power : 58.9 [kVA] Rated Current: 109 [A] Supply voltage: 400 [V] Working time: 2472 [h] Number of cutting hours: 2297 [h] Dimensions: 2375 × 4558 × 3659 [mm] Weight: 1300 ...