rinsing machine used for sale

Regal RP12/T twin head rotary filling machine suitable for coleslaw and potato salad type products into square containers. The anticipated production speed is between 60 - 65 containers / minute. The machine will also be capable of running rectangular pots in the future, although an additional set of change parts will need to be purchased. 1.1.1 – PRODUCT SPECIFICATION DETAILS Machine Layout Container Dispense: A twin head positive separation container dispense complete with vacuum assist pull-out arms, to dispense 2 containers each index into the rotary table. The stack will have its own container detection system which will initiate the shift register on the machine. Container Detection: Container detection will be done on the station after the de-nester via 2 visual sensors. Filling Assembly: A twin head, volumetric filling assembly suitable for filling coleslaw and p ...

3 pieces diameter 63 mm/ 4 pieces diameter 80 mm/ 3 pieces diameter 100 mm/ 1 piece diameter 125 mm/ unused and in original packaging

Without the exhaust pipes

Table adjustable in height

stacking bundler Heidelberg HSB 34; good condition; cleaned and tested; .max. Format 34x23cm, min.14x8cm; .max. Stack length unpressed 75cm; Bandwidth 12mm PP tape; Compressed air required. Stacker bundler Heidelberg HSB 34; good condition; cleaned and checked; max.size 34x23cm, min.14x8cm; max.pile lenght unpressed 75cm; band width 12mm PP-band; need compressed air.

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

Technical data Type: F 50 Grinding length: 500 mm (600 mm without magnetic plate) Grinding width: 200 mm Table size: 200 x 600 mm Spindle speed: 3000 rpm Grinding wheel: Ø 225 x 25 x 51 mm Power: approx. 2.7 hp Weight: approx. 1200 kg Configuration Magnetic clamping plate Automatic transverse feed Stepless table movement Fine adjustment of the grinding head Coolant Setup Protective cover

Includes: Claenox 4.0 cleaning machine

Jaw width: 125 mm Reference: Wittner - Lot 34

40 bar IKZ filter system For DMG machines

ECKERT JANTAR 2 plasma-gas cutting machine manufactured in 2013 in Poland, is designed for cutting sheets made of e.g. black steel and stainless steel. The machine’s high-quality steel portal has been extended by an additional 700 mm to facilitate the loading and unloading of larger sized workpieces. A sectional extraction table with a length of 6000 mm and a width of 3000 mm effectively eliminates contamination generated during the cutting process, ensuring a high level of safety and great user comfort. Outside the working area of the JANTAR 2 plasma cutting machine, there is a system for cutting pipes and profiles with a special gear and rotating head, giving the possibility of precise cutting of pipes up to 300 mm in diameter by plasma or gas. The machine is also equipped with, among others, an ECS 872 CNC control, a WALTER SKTG 5.5/15 SM screw compressor, a KJELLBERG HiFocus 161 ...

aba FF 625 Surface grinding machine ABA Precision Surface Grinding Machine FF600/25 Grinding length 600mm Scrap width 250mm Electric Magnet 600x250mm Workpiece height 400mm Diamond puller Height adjustment digital Motor 3,27 KW 400 V 50 HZ Coolant device Grinding wheels and flanges Weight: approx. 1350 kg G&-5020-M1768

2.4 kg batch like new, only 4 x run, airflow, drum speed adjustable, Artisan cropster connection

Various diameters and lengths/ including sorting board with Lista insertion trays

Lot of twist drills Ø10.0 / Ø10.2 /Ø10.5 / Ø11.0 mm from Gühring.

We offer a complete set of original Kellenberger documents , for increasing the tip height by 50 mm. These are ground to a height. The overall picture shows the condition of the documents before post-processing

KOEPFER 151 Gear Hobbing Machine - Horizontal Available 2 machines. Semi-automatic machine Max. gear dia 150 mm Module 2 Max Profile depth / Plunge cut depth 7 mm Max hobbing length 135 mm Max length of workpiece, approx. 280 mm Hob slide swivable 250 degrees Hob size dia x length 65 x 60 mm Hob shifting, manually max. 40 mm Hob Spindle speeds 140 – 1120 rpm Workspindle bore 24 mm Bore of collet chuck, max. 3 – 24 mm Feed range, axial/plunge cut 0.06 – 2 mm/rev No. of teeth, min./max. 6 - 200 Spindle Drive/Total electrical load, approx. 2,2 / 4 kW Weight, approx. 1,400 kg Very good condition

Clever HIT S-20 installation kit complete for stationary machine with joint milling (This is a Vorfür unit) Net worth: 11 KW Air heater max. temp.: 650°C at 20 m/min feed List price: € 12.890 our price: € 5.950 Installation/retrofit: € 2.950

Brand 1210F - KDF210 Optimat Brand: Brandt Type: KDF 210 -1210F Year of construction: 2014 Control: Easy Control 10+ Non-contact route control Feed controlled with start-stop optic-indicative sensors Screen: LCD, 420 letters, 4 program memories Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers/product guidance: Zentra control, 2 roller conveyors positioned opposite each other Joint milling unit: 2 x 0.75 KW 200 HZ Including joint milling set in DIA design, with manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness Gluing unit A3 gluing part for hot melt glue and possibility for PU application, magazine, pressure zone with electro-pneumatic 2 point positioning via central control Pressure zone: 1st roller driven and 2 rollers running freely for good and con ...

Accessories see lot no. 183

Unused in the original packaging Rated input voltage 220 Frequency Hz: 50/60 Rated input power Kw: 7.5 Rated input current A: 42 Duty cycle 40C 10 min

Okoma PN 2 tenon cutter Brand: Okoma Type: PN2 Year of construction: M-No.: Machine data: saw: 3.0 KW, 2.800 rpm, tool: ø400 mm, 140 mm cutting height - turret head cutting height Slot spindle 7.5 kW - 2,800 rpm, tool: ø400 mm, 4,000 rpm, spigot length: 170 mm spindle clamping length: 160 mm Table: Electric, with pneumatic workpiece clamps Tish height: Travel 80 mm Stop: Stop can also be used as miter stop Dimensions: approx. 2.2 m x 1.6 m, 1.7 m high, plus tenon table: 0.50.8 m Weight: 600 KG

with approx. 95 HSK-63 tool holders

Belt and internal grinding machine, oscillating, with several grinding inserts. Condition: never used / new (5)

Panhans 261 tenon cutter Brand: Panhans Type: 261 M-No.: 1112 Machine data: saw: 2.6 KW, 3.000rpm, tool: ø400 mm, 160 mm cutting height Slot spindle 7.5 kW - 4,000 rpm, tool: ø400 mm, spigot length: 170 mm spindle clamping length: 160 mm Table: Manuel, with pneumatic workpiece clamps Tish height: Travel 80 mm Stop: Stop can also be used as miter stop Dimensions: approx. 1.9 m x 1.6 m, 1.7 m high, plus tenon table: 0.50.8 m Weight: 600 KG

Plasma cutting machine; max. cutting thickness 20 mm; adjustable amperage: 20 - 40 amps; IGBT technology; Function: Plug for CNC control; accessories and protective cover included; unused and in the original packaging

Jaw width: 125 mm Reference: Hercegfi - Lot 5

Edge banding machine Cehisa SYS 5PS - Only about 60 km edges glued / little used! - Condition tiptop - Sturdy construction all important aggregates available: - Infeed ruler - Joining milling - Preheat plate - Glue application - Apply edges (rolls or strip magazine) - Pneumatic pressure roller driven - Pressure roller on top, spring-loaded - Pressure roller at the bottom, spring-loaded - Caps front & rear - Flush milling top and bottom - Copy corners front and back -Scraper - Schwabbelscheibe Accessories: -Tool - Feed rollers for various edge materials - various spare blades - Settings folder Year of construction 2008 Masch. No. 532 The machine is approx. Available at the beginning of October (probably earlier) and would then have to be picked up on a fixed date. Disassembly and collection by buyers The machine is in top condition, ready for  ...

Quick cutting machine with 76cm cutting width Insert height 11cm Inlay depth 76cm Hydraulic pressure infinitely adjustable, 150daN-2500daN Program control, direct dimension input Electrical connection 400V/50Hz

Power: 1.3Kw Grinding wheel size approx. 225mm Dimensions of clamping magnet: 350x180mm with suction device

Equipped with Input voltage: 230V 16A; Open-circuit voltage: 27.5V; Current range: 48-90A; Input power: 2.4 kW; Insulation class: H; Applied welding rod: 0.9 mm; Fuse: 16A; Weight: 14.2 kg; Unused in box

Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools

Tetra Pak TCAP/21 1000 ml ReCap 3 applicator We offer: Tetra Pak TCAP/21 ReCap 3 applicator for 1000 ml Tetra Pak beverage cartons, Year of construction 2004 - in very good condition - optimally maintained Subject to prior sale

Tube range up to: 48,3x3,25mm (E235mitRm =2xD) Bending radius up to: 125 mm Control: electronic ( + known 4-fold bending angle preselection ) Bending angle maximum: 180° Bending speed: 20°/s Dimensions L / W / H: 2380 / 800 / 1250 mm Weight: approx. 650 kg Electr. Power: 2.4 kW incl. sawing unit with visualization of the saw position via line laser Deburring unit, drive unit for assembly attachments Tube positioning - length and twisting 2-axis positioning indicator, premature mandrel retraction Auto. Mandrel lubrication (minimum quantities) Interface for network connection and data import

Tetra Pak TCAP/21 1000 ml ReCap 3 Applicator We offer: Tetra Pak TCAP/21 ReCap 3 Applicator for 1000 ml Tetra Pak beverage cartons, manufacturing year 2004 - in very good condition - excellent serviced Available from stock Prior sales reserved

Martin T45 Thickness Planer Brand: Martin Type:T45 Main motor 5.5 KW - 400 V Speed 5,000 or 6,000 tpm Knife shaft Z-4 Tersa Flight circle ø125 mm Planer width 6,300 mm Planer thickness 2.8 - 300 mm Spahn removal max. 12 mm Thickness table length 1,260 mm Feed 6-12 m/min. weight 1.500 KG Condition: NEW Price Dealer price: Options: Planing shaft: X-Plane planing shaft with 4-fold reversible blade T45 Contour: Machine for profiling, with Z-4 Tersa, Z-2 Contour profile inserts T45Plastic: Machine especially for plastic processing Motor 7.5 KW, 11 KW and frequency controlled Thickness table extension: import and export side640 mm or 1,200 mm Feed: Frequency control from 2 to 25 m/min. Indent: Articulated feed whales Pull-out whales: Second pull-out whales Machine lubrication: Central with hand pump or automatic Table bezel: import has been atta ...

offer 23034 Specifications: - grinding length approx. 350 mm - grinding width 150 mm - installation height with / without magnet 150 / 210 mm - Grinding wheel stroke approx. 200 mm - Clamping surface 300 x 160 mm - Magnetic clamping plate 250 x 150 mm - Grinding wheel dimensions approx. 200 x 80 x 78 mm - Grinding wheel speed 2800 rpm - Swivel range of the grinding arm approx. 180 ° - manual swivel arm clamping via clamping lever - Wet grinding device - Drive 400 V / 1.85 kW - Space requirement approx. W 850 x H 1650 x D 800 mm - Weight approx. 350 kg

Brand: KAMRO Type: DAK510 Year of construction: 1978 Planer width dresser/thickness planer: 530 Knife shaft: ø120mm, Z-4 tersa or X-Plane Speed: 5,000 rpm Motor: 4 KW Feed rolls: imports Toothed steel, Export rolls: rubber Planing height: 3 - 250 mm Table length dresser: 2,300 mm Table length thickness table: 920mm Chip removal: 8mm Feed: 6/12 m/min weight: 1050 KG Options: X-Plan Wave SuvaMatic Motor: 5.5 KW or 7.5 KW Open table electrically Feed frequency control

Box size 500x325x350mm; rated input current A MIG; 35/MMA; 38/TIG28; Rated input capacitance KVA MIG; 8.05/MMA; 8.74/TIG; 6,44;

Working range 5-80 mm for tip grinding, tip angle infinitely adjustable from 50-180 °, tool speed 8-23 1/min, diameter of pointed disc 100 mm, speed of sharpening disc 2800 1/min, diameter of tip grinding wheel 300 mm, speed of tip grinding wheel 1420 1/min, grinding feed infinitely variable from 0.4-4 mm/min

Manufacturer: ELB Type: SWN 6 VA2 Year of construction: 1982 Grinding length: 600 mm Grinding width: 320 mm Workpiece height: 525 mm Table clamping surface: 600x300 mm Magnetic plate: 600x300 mm Machine dimensions: 2600x1500x2000 mm Machine weight: ca. 2t