rinser filler and used for sale

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

Laboratory homogenizer mixer Manufacturer: Becomix Type: RW 2.5 Content: 5 litres boiler capacity Technical specifications : Vacuum homogenizing system Mobile table version Usable space: Operating temperature 100 °C Pressure -1/+1 bar, vacuum-resistant Capacity 5 litres Boiler room: Operating temperature 110 °C Pressure 4 bar Power 4.8 kW Content 2 litres

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

Spiral mixer KEMPER, type: SP150 AL with lifting tipper DIOSNA HK240 -In very good condition- - Machine overhauled in 2024 - Incl. 3 tank cars (also overhauled) - Kettle for 240 kg dough or 150 kg flour - incl. DIOSNA HK 240 lifting tipper also overhauled - Condition: Very good, ready to use immediately Visits and test runs are possible by arrangement.

An essential ingredient for removing impurities from the material. With a specially developed rotor with replaceable blades, high friction is generated at the target fraction and thus ensures thorough cleaning. Maintenance hatches on both sides allow easy access to the interior. The housing and the screens underneath are made of stainless steel. A support frame is included as well as inlet and outlet nozzles for the water. More information on request!

TECHNICAL DATA: Usable width: 400 mm Installed power: 1.5 hp

General SKU397X1140 MakeGab Neumann LocationBarneveld CEcheck Type22 l. Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Tube capacity22 l. Max. temperature-30°C/+180°C Shell capacity13 l. Shell diameter400 mm Shell length1090 mm Max. temperature-30°C/+180°C Shell connectionsDia. 125 mm Cover connectionsDia. 25 and 50 mm Information No.28123-21620 Year of construction2010 Weight355 kgShell and tube heat exchangersNew arrivalsGab NeumannHeat exchangers > Shell and tube heat exchangersNew arrivalsBrand > Gab Neumann What you can expect from Foeth: -- Machine is in working c ...

Machine name: Combined heat and power plant used Manufacturer: SEnergie GmbH Type: G6.12TI Year of Make: 2008 Generator: NEWAGE STAMFORD Generator Type: UC. I274D2 Generator kW: 100 kW Fuel Type: Sewage Gas Electrical power: 80 kW Thermal power: 123 kW Efficiency: 88.9% Dimensions: L 3,500 x W 1,100 x H 2,500 mm Curb weight: 3,000 kg Tech. Documentation: Yes Note: In 2018, a new engine was installed and the generator was rewound. Last service 15.10.2021 at 86,102 h Accessories: A control cabinet Condition: Used Price: On request

Used line for bottling juices into Tetra Rex cartons. 7.000 pcs/h Specifications: Tetra Rex Filling Machine: Type: Tetra Pak TR/27 Year of manufacture: 2016.11. Capacity: 7000 pcs/h Formats: 1 l, 0.5 l 2 Tray Making Machine: Type: Cardboard Packer 32 by Tetra Pak Year of manufacture: 2016.10. Formats: 23, 43 Conveyor 2: Type: Conveyor Control System Year of manufacture: 2016.10.

2 pieces of natural gas CHP in container Engine: Jenbacher J420 Engine version: B25 Power each: 1339 kW at altitude 1900 meters, at NN the power is 100 kW higher! Year: 2013 Generator: Leroy Somer LSA 52.2 L70 4P with 1970 kVA power Voltage: 400 V Hours: 13200 and 15600 The power generators were regularly serviced and checked. The systems are dismantled and immediately available. Subject to prior sale - errors possible! Internal reference number: E-1004-114

Model: TRC1500/600 Year: 2002 Condition: Used Serial Number: 1790 Stock Number: 3213 Belt width: 600 mm Transport length 1500 mm Power: 3 x 400V, 50Hz, 0.09kW Dimensions: 1600 x 850 x 1000 mm Weight; 135 kg

Year: 2005 Condition: Used Serial Number: 08060.01.01.00 Stock Number: 2597 Lifting height 1650 mm Sliding on rails Container: 200 litre tote bins Power: 3 x 400V, 50Hz, 0.75kW Dimensions: 1400 x 3150 x 2600 mm

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 monoBlock With track control Heidenhain iTNC 530 Year of Make: 2005 Travels: X 980 Y 630 Z 630 Speed range: 0 – 18,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Rigid angle table 1250 mm x 700 mm clamping surface 3 D Probe Heidenhain Tool measurement in the BLUM Laser workspace Vertical tool changer with 32 magazine positions (HSK 63) Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 Chip conveyor Coolant Setup 3-Piece Height Adjustable Machine Shoes Spindle Oil Cooler Control cabinet cooling unit (Rittal) Operating Instructions

The TBA 8 V110 1000ml Square is a space-saving Tetra Pak solution for safe, aseptic filling of liquids. Their square design ensures maximum stability and efficient display on the shelf.

Work and assembly table wood self-made approx. 250x100 cm, steel base, electrification

Double work and assembly table wood self-made, 1 table approx. 400x100t cm, 1 table approx. 300x100t cm, small contents consumables

A Häusler rolling and bending machine is available. Number of rollers: 3, section modulus: 46cm², max. flat material capacity at 1000mm: 100mm/20mm, max. pipe capacity at 900mm: 102mm/6mm, max. square material capacity at 600mm: 60mm/60mm, max. T-profile capacity at 1200mm: 1200mm/1200mm/13mm, shaft diameter range: 125mm-135mm, machine dimensions X/Y/Z: approx. 4500mm/1700mm/1500mm, weight: approx. 6500kg. An on-site inspection is possible.

Cross-cut and mitre saw METABO KGS 216 M, blade size max. 216 mm, S/N 6017897464

Door belt drilling machine for processing aluminium profiles with pneumatic material tensioners and micro spraying device Processing length: max. 2400 mm Wing profile width max. 108 mm Frame profile width: max. 200 mm Profile height: 45-80 mm Spindle speed: 1900 rpm Weight: approx. 500 kg

A fully automatic explosion-protected bottle filling system is offered. Filling station Mewes: 4 nozzles, suitable for alkaline and slightly volatile products, capper, labeling station Pago. Capacity max.: 1000 units per hour, container sizes: 150ml-1000ml, pneumatic drives. Accessories: working platform for container product feeding. Inspection by appointment possible.

Work and assembly area: wood, self-made, angular approx. 200x200 cm, attached storage area, on the opposite side another workstation approx. 200b cm, both workstations are screwed together, with small contents consumables, drills, etc.

Key data: 75 KW, 80 kVA, 400 V

Viessmann Gas-CHP Vitobloc 200 EM-70/115 Gas power and heat generator from 2013 with unknown operating hours, control with missing parts. 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 43.2L8 C 6/4, 80 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM-70/115 Type: Gas CHP Serial Number: 7411148 3 02168 101 Engine: MAN E0836 E302 Power [KW]: 75 Power [KWel]: 70 Year of Make: 2013 Operating hours: unknown Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 340 x 90 x 180 AC Generator Leroy Somer LSA 43.2L8 C 6/4 Manufacturer: Leroy Somer Model: LSA 43.2L8 C 6/4 Type: AC Synchronous Generator Serial Number: 302845/2 Power [KVA]: 80 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 115 Speed [1/min]: 1,500 Year of Make: 2013

CMT Cheese Stretching and Moulding Line . CMT FL 1400 / Boilers/ Tanks/ Moulding / Extruding . CMT Cheese Cooking, Stretching and Moulding Line Screw Hopper for Cheese Transfer Moulding Machine with 2 Sets of Moulds Boiler and Hot Water Tanks Control Panel Manual Book Technical Manual Condition : Good Location :, Use: Cheese Cooking, Stretching and Moulding

Key data: 180 KW, 223 kVA, 400 V

MDE Gas Generator (CHP) MBK 2876 LN Sewage gas electricity and heat generator from 2001 with unknown operating hours, control has defect. 173 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA K46.1 VL12TR C11/4 Manufacturer: MDE Model: MBK 2876 LN Type: Natural Gas Electricity and Heat Generator Serial number: E 20464 Power [KWel]: 173 Power [KWth]: 289 Voltage [V]: 400 Current [A]: 346 Frequency [Hz]: 50 Engine: MDE BK 2876 LN – sewage gas Engine power [KW]: 180 Year of Make: 2001 Operating hours: unknown Weight unit [kg]: 3,000 Dimensions LxWxH [m]: 3.40 x 1.90 x 2.20 AC Generator Leroy Somer LSA K46.1 VL12TR C11/4 Manufacturer: Leroy Somer Model: LSA K46.1 VL12TR C11/4 Type: AC Synchronous Generator Serial number: DJ07B532/02 Power [KVA]: 223 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 321 Speed [1/min]: 1,500 Year of Make: 2001 We ...

turning diameter over bed: 630-640 mm turning diameter over slide rest: ca 380 mm turning length: ca 2000-4000 mm total power requirement: 15 kW weight of the machine ca.: 7-8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4,0 mm roll diameter: ca. 120 mm throat: 450 mm total power requirement: kW weight of the machine ca.: 0,48 t dimensions of the machine ca.: 1,3 x 0,8 x 1,8 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cooking kettle Kerres FKK 250L, Natural gas heated, power 12kW, el. Connection 230V, Dimensions of kettle inside approx. 69x80x46cm, Total dimensions LxWxH approx. 95x125x118cm, weight approx. 344kg, older device, good used condition, functional, lid spring defective

Description: For sale is a solid and well-kept detached house in a very good, central location of Selva. The property convinces with a stable building fabric, continuously carried out modernizations and an easily usable plot of approx. 580 m². Ideally suited for families, couples, retirees or as a stable investment. Your highlights at a glance - Living space: approx. 108 m² (purely residential) - Property: approx. 580 m² - versatile use - Condition: well-maintained & continuously modernized - Energy certificate: available and will be sent with the exposé - Parking: 3 outdoor parking spaces directly at the house Major modernizations (partially / renewed in recent years) - Roof - Heating system - Sanitary areas - Electrical installation - High-quality 3-fold glazed plastic windows House interior painted by specialist company in 2025 All wall mounted radiato ...

Key data: 997 KW, 1222 kVA, 400 V

For sale is a used gas generator of the brand Gastechnik with Deutz MWM TBG 620 V16 engine with accessories. The accessories consist of: 4 control cabinets. Gas line. Heat exchanger. Electric pump etc. Power: 1222 kVA / 997 kW Year of Make: 1998 Nominal voltage: 400/231 V Frequency: 50 Hz COS φ: 0.8 Generator: Stamford HC.1734F2-CG (Newage) Weight: approx. 10,000 kg

HUBER CC303 Polystat CC3 Bath and Circulation Heating Thermostat CC 303 Circulation Water Bath with CC3 Thermostat Working temperature: 55...300°C with cooling device: -20...300°C Dimensions (W x D x H): 335 x 382 x 433 mm Net weight: 22 kg Max. delivery power: 25 l/min; 0,7 Max. suction power: 18.5; 0.4 bar This model has been replaced by the CCx-315B vpc model

For sale is a high-quality lead and pull spindle lathe from the renowned German manufacturer Weiler, model Condor VS 1. The machine convinces with its high precision, robust construction and durability and is in a very well-maintained and technically perfect condition. Ideally suited for the workshop, single part production and precise turning work. General information: Machine Type: Lead and Pull Spindle Lathe Manufacturer: Weiler Model: Condor VS 1 Year of construction: approx. 1977 Condition: Well maintained, technically perfect Availability: Immediately available Technical data: Max. turning diameter over bed: approx. Ø 330 mm Max. turning diameter via support: approx. Ø 170 mm Max. turning length: approx. 800 mm Bar passage: approx. Ø 38 mm Spindle: Speed range: approx. 24 – 2,800 rpm Feed & Thread: Feed range: approx. 0.037 – 1.253 mm/rev  ...

A used Rego Herlitzius Kobold Bread Gate 9mm is currently for sale and immediately available. Rego Herlitzius - Creel machine - on castors - with lubrication - Cutting machine 9mm - for max. 42cm loaves of bread Technical data: - Manufacturer. HERLITZIUS - Model: Leprechaun - Year of construction: 2005 - Power: 0.75 kW - Nominal voltage: 230 V 50 Hz Dimensions: Width: approx. 61cm Depth: approx. 68cm Height: approx. 120cm

Counter with heating and cooling unit EMAINOX ILS3, S/N A140094400004, 230 V, cooling unit 3 levels, total approx. 250 cm

Waldner Dosomat 16, rotary, 6-head filling machine for aseptic filling of cups. Capacity: up to approx. 9.000 cups/hour. 3x Format sets: round 95 mm, square 65x65 mm and square 95x95 mm. Format change in the shortest possible time by the tool-free exchange of quick-change format plates, push-in cup destackers and lid magazines allow immediate response to the daily market requirements and to the realisation of strategic decisions in terms of cup design changes., Working principle:, - Automatic cup de-stacking storage buffer magazine for ± 15 minutes buffer (preformed cups)., - Cup de-stacking station., - Cup sterilisation using H2O2 and hot sterile air. All the necessary valves and lines are situated in a sterile module next to the machine. The cups passing through it are subjected to sterile air enriched with H2O2 and then finally dried with hot sterile air. In this way, especially moul ...

A height-adjustable turning device PETec for welding work is available. Rotation function: 360°, max. load capacity: 1000kg, height adjustment range: 500mm-2000mm, column spacing range: 500mm-3000mm. An on-site inspection is possible.

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

CNC cylindrical grinding machine, (carousel) for internal, external and surface grinding. A lot of accessories, such as grinding wheels of different types and sizes. Retrofitted 2007 . Magnetic clamping plate dia 1500mm, Circumferential diameter 1800mm, Largest grinding diameter 1600mm Maximum grinding height 880mm Max. workpiece weight 5to Swivel angle of the grinding spindle: 90° left, 60° right

1) sander top VEGA 311 MRL Sanding width 1100 mm. Working thickness 3 to 160 mm working height 950 mm Sanding belt dimensions 1120 x 2620 mm. Equipment: 1) cutterblock diameter 180 mm 22 kW 47m/s 2) rubber contact roller diameter 220 mm 22 kW 18m/s 3) combi roller/sanding shoe 12.5/16 kW 9/18m/s sanding belt blow off 4) Finishing brush unit at output 0.75 kW diameter 150 mm feed speed adjustable 2.5-13 m/min 3 kW pneumatic sanding belt tension motor height adjustment 0.75 kW extraction rate: 11800 m?/h 2) bottom sanderVEGA U 311 MRF Sanding width 1100 mm. Working thickness 3 to 160 mm working height 920 mm Sanding belt dimensions 1120 x 2620 mm. Equipment: 1) cutterblock diameter 180 mm 22 kW 47m/s 2) rubber contact roller diameter 220 mm 22 kW 18m/s 3) combi roller/sanding shoe 12.5/16 kW 9/18m/s sanding belt blow off 4) Finishing brush unit at output 0.75 kW diameter 150 mm feed speed  ...

Max. workpiece height 100mm Max. workpiece width 1000mm Min. workpiece width 500mm Top unit 6 brushes Top/bottom adjustable unit Helicopter rotating system 2 types of brush rotation speeds Smooth adjustment of belt feed speed Belt feed 1.5kW 4kW motor Diameter of the exhaust port 180mm, 200mm

Top/bottom calibrating line: Bottom sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, motor 22 kW 5. Cleaning brush Variable Feed Speed Vacuum workpiece suction Top sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, motor 22 kW 5. Cleaning brush Variable Feed Speed Vacuum workpiece suction

Sanding line with working width 1300 mm, constant working height. Line consisting of: - Undersander 2 sanding units 1 x Combi unit with contact roller 60? shore and segmented shoe, motor 22 kW 1 x Segmented shoe, motor 15 kW 1 x Brush Vacuum workpiece suction, 7.5 kW motor -Intermediate transport: 4200 x 1300 mm -Top sander 2 sanding units 1 x Combi unit with 70? shore contact roller and segmented shoe, 22 kW motor 1 x Segmented shoe, motor 15 kW, 1 x Brush Vacuum workpiece suction, motor 7.5 kW Feed speed: infinitely variable Table spring-loaded or fixed adjustable

Hardware drilling and recessing machine, with multi-spindle head Table mounted Motor 1,1 kW Fence left and right, 1,5 m. long

Capacity: 2 x 2.70 m. 3 x vertical pushers 2 x horizontal pushers Pneumatic Mobile

Capacity: 3000 x 1900 m. 4 x horizontal presses 2 x vertical pressure beams Hydraulic pump with 3 kW motor

ROLLER COATER with SINGLE SPREADING-COATING ROLLER - Max working width mm 1300 - Lenght of the machine mm 1000 approx - Thickness of the panels (working height): mm 0 - 100 - Adjustable feeding speed: m/min 4 - 23 - Separate (from the machine s body) electric and command cabinet - Total installed power KW 2.4 - Equipped with: - 1?) Dosing unit (Chromium plated Doctor roller diam. mm 174), KW 0.37 - 2?) Coating unit (Rubbered spreading roller diam. mm 248) KW 0.75, with a rubbered bottom roller, counter-placed to the top one

Max working width: 1300mm Max working thickness: 140mm Max. machining width: 1300mm Motorized feed rollers 2 brushing units

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers PN20 Glue scrapers Nozzles for detergent and anti-stick Polishing unit Control: Power Control PC22

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15? Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication