ring spin used for sale

Tool holder, milling holder, milling tool, adapter, clamping unit -Milling tool: Milling adapter ring set -Various sizes: see photos, more pictures can be sent -Dimension box .: 280/180 / H80 mm -Weight: 3.3 kg

toothed belt pulley, Slewing ring -Slewing ring: with toothed belt pulley -Slewing ring: Ø 520 mm -Pulley: Ø approx. 370 mm -Belt width: 80 mm -Sockets: bolt circle Ø 490 mm Ø 18 / M16 -Measurements: see photos -Dimensions: Ø 520 x 200 mm -Weight: 79 kg

Slip ring, slewing ring, rotary transmitter, slip ring rotor, slewing ring slip ring, column slip ring, slip ring transmitter -Comes from: HUSS Rides manufacturer of leisure facilities -Slip ring: 10 x copper rings -2x holder: 5 carbon brushes each -Interior mount: Ø 600 mm -Outer: Ø 720 mm -Construction height: 410 mm -Number: 2x available -Price: per piece

Slip ring, slewing ring, rotary transmitter, slip ring rotor, slewing ring slip ring, column slip ring, slip ring transmitter -with: rotary outlet -for: electricity 9x -Dimensions: 390/220/H190 mm -Weight: 11.6 kg

Ring sensor, hose sensor -Ring diameter: 10.1mm -Operating voltage: 10 - 30 V -Switching output: 200 mA, pnp -Protection class: IP 67 -Plug: M12 4-pin -Dimensions: 90/35/H55 mm -Weight: 70 g

Positioning ring, clamping ring, clamping pallet, short taper, shuttle table -Type: SRB 120 -for: NSA plus tensioning station -both sides: ground -Clamping rings: with ground short taper for a positive connection of the clamping pallets or devices with the clamping modules. -Form-fit connection: between clamping pallet and NSA plus clamping station. -Number: 25x available -Price: per piece -Dimensions: Ø 118/H19 mm -Weight: 0.8 kg

Pair of deep groove ball bearings, deep groove ball bearings, ball bearings, single-row deep groove ball bearings, with intermediate ring C. ELGES 618 24 Y 2x Deep groove ball bearings: Diameter ( inner / outer ): Ø 120 / 150 mm, height: 16 mm 1x Intermediate ring 1: Diameter ( inner / outer ): Ø 140 / 150 mm, height: 5 mm 1x Extension tube 2: Diameter ( inside / outside ): Ø 120 / 129 mm, Height: 5 mm New ! Dimensions ( single bearing ): 150 x 150 x 16 mm dimensions ( packaging ): 160 x 160 x 40 mm

Press mould Ring of control of the first opening of 28 mm. (Turkey) widely used in the medical industry. Wear 40%

Serialnumber: 20610011 Year of construction: 2020 Volt / Hz / Kw: 400 V / 50 Hz / 0.75 Kw Country of origin: Germany

Sealing ring, comb-profiled, comb profile gasket SIEMENS B 214x324 0080250216 Seal thickness: 5 mm diameter ( outside / inside ): Ø 324 / 214 mm Material: Carrier material: stainless steel, support: graphite New ! Dimensions ( packaging ): 350 x 350 x 10 mm

Sealing ring, comb profile, comb profile gasket SIEMENS A 255x284, 7x4 0080312458 Seal thickness: 5 mm diameter ( outside / inside ): Ø 284 / 255 mm Material: Carrier material: stainless steel, Coating: graphite New ! Dimensions (packaging): 300 x 300 x 10 mm

Sealing ring, comb-profiled, comb profile gasket SIEMENS A 350x375, 7x4 3-802502-167 Seal thickness: 5 mm diameter ( outside / inside ): Ø 375 / 350 mm Material: Carrier material: stainless steel, overlay: graphite New ! Dimensions (packaging): 400 x 400 x 10 mm

Sealing ring SIEMENS Ø 252 / 200 x 1.5 49021883400 Seal thickness: 1.5 mm Diameter ( outside / inside ): Ø 252 / 200 mm Material: SIGRAFLEX® New ! Dimensions ( packaging ): 355 x 355 x 10 mm

Clockwise and anti-clockwise rotation of the rollers via foot switch Roll delivery: manual Shaft diameter: 50 mm Diameter of drive rollers and infeed rollers: 155 mm Stroke length vertical: 150 mm Roller speed: 9 rpm Motor power: 1.3 kW Dimensions: 900 x 700 x 1500 mm Bending performances: Flat upright: 60 x 10 mm, or 50 x 12 mm Solid material square: 35 x 35 mm Solid material round: 35 mm U-profile: 60 x 30 x 6 mm Round tube: 70 x 3 mm Square tube: 70 x 30 x 3 mm, or 60 x 60 x 3 mm Weight: approx. 350 kg

ISO-KF clamping ring, for elastomer seal, 30 pieces PAGUS DN 10 / 16 ISO-KF nominal diameter: 10 / 16 mm length: 61 mm width: 16 mm diameter: 44 mm adapter material: aluminum Other quantities on request ! used, tested ! dimensions ( single clamping ring ): 61 x 44 x 16 mm dimensions ( packaging ): 210 x 130 x 50 mm

ISO-KF clamping ring, for elastomer seal, 25 pieces PAGUS DN 20 / 25 ISO-KF nominal diameter: 20 / 25 mm length: 72 mm width: 16 mm diameter: 53 mm adapter material: aluminum Other quantities on request ! used, tested ! dimensions ( single clamping ring ): 72 x 53 x 16 mm dimensions ( packaging ): 210 x 150 x 60 mm

ISO-KF clamping ring, for elastomer seal, 25 pieces PAGUS DN 32 / 40 ISO-KF Nominal diameter: 32 / 40 mm Length: 90 mm Width: 16 mm Diameter: 70 mm Adapter material: Aluminum Other quantities on request ! used, tested ! dimensions ( single clamping ring ): 90 x 70 x 16 mm dimensions ( packaging ): 210 x 180 x 80 mm

ISO-KF clamping ring, for elastomer seal, 10 pieces PAGUS DN 50 ISO-KF nominal diameter: 50 mm Length: 113 mm width: 20 mm diameter: 92 mm adapter material: aluminum Other quantities on request ! used, checked ! Dimensions ( single clamping ring ): 113 x 92 x 20 mm Dimensions (packaging): 210 x 120 x 100 mm

ISO-KF clamping ring, for elastomer seal, 2 pcs CA DN 50 ISO-KF nominal size: 50 mm length: 101 mm width: 17 mm diameter: 75 mm adapter material: stainless steel ( 316 ) other quantities on request ! used, tested ! dimensions ( single clamping ring ): 101 x 100 x 17 mm dimensions ( packaging ): 110 x 100 x 40 mm

ISO-KF clamping ring, for elastomer seal, 2 pcs PAGUS DN 50 ISO-KF nominal diameter: 50 mm length: 101 mm width: 17 mm diameter: 80 mm adapter material: stainless steel Other quantities on request ! used, checked ! Dimensions ( single clamping ring ): 101 x 95 x 28 mm Dimensions (packaging): 110 x 100 x 60 mm

Bending capacity: Ø45 mm Bending angle: 0 - 180° Bending turret: 8-fold angle adjustment Mandrel length: 4000 mm Bending tools: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Equipped with: - 4 Thorns - Mandrel retraction device Country of origin: Germany Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg

ISO-KF clamping ring, for elastomer seal, 2 pieces PAGUS DN 50 ISO-KF 031106-3 Nominal diameter: 50 mm Length: 102 mm Width: 18 mm Diameter: 80 mm Adapter Material: Stainless Steel ( 304 ) Other quantities on request ! used, tested ! dimensions ( single clamping ring ): 101 x 95 x 18 mm dimensions ( packaging ): 110 x 100 x 40 mm

Clockwise and anti-clockwise rotation of the rollers via foot switch Roll delivery: manual Shaft diameter: 50 mm Diameter of drive rollers and infeed rollers: 155 mm Stroke length vertical: 150 mm Roller speed: 9 rpm Motor power: 1.3 kW Dimensions: 900 x 700 x 1500 mm Bending performances: Flat upright: 60 x 10 mm, or 50 x 12 mm Solid material square: 35 x 35 mm Solid material round: 35 mm U-profile: 60 x 30 x 6 mm Round tube: 70 x 3 mm Square tube: 70 x 30 x 3 mm, or 60 x 60 x 3 mm Weight: approx. 350 kg

Shaft diameter 30 mm 2 driven shafts Clockwise and counterclockwise rotation Accessories see photo

Semi-automatic wire comb binding machine ( wire -O ) RENZ AUTOBIND 420 for books and calendars with hanging system KAS 200 built in 1997 Serial No.: 7108 Spiral length from 60-420 mm Speed max. 1800 cycles/h. including tools 3/16", 1/4", 5/16", 3/8", 7/16", 5/8" and 7/8".

- Synchroblock - Drive cardan shaft between the two machines - Different bottle formats - Machines in good condition

Machine Type: Ring Bending Machine Manufacturer: ZOPF Model: ZB 60 M Year of construction: 1996 Condition: good Offer Type: Used Machine Specifications: Capacity: Ø 60 x 1.5 mm Drive type: el./mech. Propulsion: 0.75 kW Remark: Substructure Standard castors plus 4 sets of castors Ø 3/8", 1", 1 1/4", 40 mm Weight: 180 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Description: Heating ring , Diameter 145 x 171 mm, , 4500 watts, , 230 volts , Heating ring Diameter 140 x 155 mm, , 3500 watts, , 230 volts Heating ring , Diameter 190 x 95 mm, 1950 watts, 240 volts , + 2 spacer rings Approx. Onsite Dimension. (l x w x h): 800 x 600 x 200 mm, weight approx.: 15 kg

OEM Pielstick PC 2-2 / PC 2.2 / PC2.2 / PC2-2 Piston ring (Compression ring 1st groove, std. 9.00 mm) - part number 02.005.0315.03 New and unused (Condition - See photos, unused, from a canceled order, stored since 2013). I have 16 pcs in stock.

OEM Pielstick PC 2-2 / PC 2.2 / PC2.2 / PC2-2 Piston ring (Copper plated compression ring, 9.00 mm) - part number 02.005.0027.02 New and unused (Condition - See photos, unused, from a canceled order, stored since 2013). I have 48 pcs in stock.

Description: Size 1 to 29 mm, set not complete Approx. Onsite Dimension. (l x w x h): 700 x 300 x 500 mm, weight approx.: 30 kg

Commemorative coins Brunei/ Singapore 1 Ringgit 1970 st KM14, Coin Set Brunei 2000-2008 1-50 Sen, Banknote 1 Ringgit, 2 Coin Sets Singapore 5 ct - 1 Dollar

: neu : 2024 : 9718 : prompt, Zwischenverkauf v : Türkei : 9500 € : 196.65 € : 1 : 50 mm : 152 mm : 162 mm : 3 : 1.1 kW : 4,5 m/min : 60x10 mm / 600 mm, 20x10 : 100x15 mm / 600 mm, 50 x : 35x35 mm / 600 mm, 15x15 : 35 mm / 600 mm, Dm. 20 mm : 70x2 mm / 1200 mm, Dm. 25 : 70x30x3 mm / 1500 mm, 30x : 50x50x3 mm / 1600 mm, 20x : 50x50x6 mm / 600 mm, 30x3 : 50x50x6 mm / 900 mm, 30x3 : 810 mm : 950 mm : 1500 mm : 500 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24126 Specifications: - Bending process mot. with automatic or manual operation - Bending capacity square bar ST 37 up to approx. 30 mm - Bending capacity flat bar ST 37 up to approx. 30 x 8 mm - Bending length between the twisting units adjustable up to approx. 1200 mm - Min. twist length 10 x material thickness ( long side ) - Bending time preselection / bending length twist preselection - Right – counterclockwise -Tailstock - Elbow + ring bending device GRB 66 with various roller sets - Bending performance - flat steel 60x10 mm high, R 700 mm - Flat steel 70x12 mm flat R 500 mm - Round tube 1 1/2" x 2 R 800 mm - Square tube 40x40x3 R 1500 mm - Angle 45x6 R 600 mm - Round tube roll sets steel 1 1/4" , plastic 1 1/2" - Standard roller set - Space requirement approx. W 1850 x H 1300 x D 700 mm - Drive 400 V / 2.2 kW ...

Description: Shaft diameter: 30 mm Standard diameter of the rollers: 118-148 mm Number of drive rollers: 2 weight approx.: 170 kg, Approx. Onsite Dimension. (l x w x h): 600 x 500 x 1,600 mm

: neu : 2024 : 9730 : Mai 2024, Zwischenverkauf : Türkei : 5800 € : 120.06 € : 50 mm : 155 mm : 2 : 1.5 kW : 4,5 m/min : 60x10 mm / 500 mm, 40x10 : 100x15 mm / 450 mm, 60 x : 35x35 mm / 900 mm, 20x20 : Ø 35 mm / 600 mm, Ø 30 mm : Ø 70x2 mm / 1.000 mm, Ø 3 : 70x30x2 mm / 1.200 mm, 50 : 50x50x3 mm / 1.700 mm, 40 : 50x50x5 mm / 800 mm, 40x4 : 50x50x6 mm / 1.000 mm, 30 : 1050 mm : 750 mm : 1450 mm : 390 kg 2 mech. driven rolls strong cast steel construction shafts made of special steel,hardened and ground top roll manual adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Marangoni Retread - Ring Tread Machine Length 3200mm Max. depth 2298mm Max. height 2120mm Type sizes min. diam. 710mm / max. 1220mm Weight 3500kgs

Center height: 450mm, maximum turning diameter: 700mm, maximum turning length: 4000mm, chuck range for the four-jaw chuck: 100 - 700mm, additional clamping cartridge span range: 500mm, spindle speed ranges: 8, adjustable from 1 to 75 rpm, feed rates: continuously adjustable from 1 to 200mm per minute. The feed drives were upgraded in 2009 to Siemens 1FK7, including all necessary electrical work, which allowed for the elimination of the PIV feed gearbox. An on-site inspection is possible.

Work spindle, drill spindle, Tool spindle, HSK 40, AD68mm, Mapal, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation and is in a completely mint condition. Work spindle, drilling spindle, tool spindle from Mapal, - tool holder HSK 40, incl. flinger ring and cover ring, - Length bearing body 129 x D 68mm, 5 roller bearings AD 68 mm, - Incl. Rotex coupling with gear rim drive side for shaft D25 mm, - Overall dimensions: 270 mm x D 68 mm, 5kg, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we wi ...

Work spindle, drill spindle, Tool spindle, HSK 50, AD80mm, Mapal, mint condition Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation and is in a completely mint condition. Work spindle, drilling spindle, tool spindle from Mapal, - tool holder HSK 50, incl. flinger ring and cover ring, - Length bearing body 149 x D 80mm, 5 roller bearings AD 80mm, - Incl. Rotex coupling with gear rim drive side for shaft D35mm, - Overall dimensions: 305mm x D 80mm, 8kg, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. Howev ...

Working spindle, drilling spindle, tool spindle, HSK 63, AD80mm, Mapal, as good as new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new! The part was bought from a spare parts warehouse of a company, has been in stock there for some time but has never been in operation and is completely new Working spindle, drilling spindle, tool spindle from Mapal, - Tool holder HSK 63, incl. centrifugal ring and cover ring - Length of bearing body 149 x D 80mm, 5 rolling bearings AD 80mm, - Incl. Rotex coupling with gear rim drive side for shaft D35mm - Overall dimensions: 305mm x D 80mm, 8kg Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and w ...

Spare parts for table drilling rig SVO / Stankoimport / Gertner, Fuhrmeister & CO Such as. complete drilling spindle SK50 (Please note the attached pdf-file with a drawing of the spindle) Ball roller spindles from the three axes Electric motors, feed motor 3x, main spindle motor complete control Siemens or control cabinet Control panel with digital device Glass mass Removable flat disc diameter 360mm Radial movement of the support of the flat disc 100mm Transformer / Transformer Angular drill head Sub-apparatus Spindle diameter 110 mm Tool holder ISO 50 Technical data of the original machine Travel laengs approx. 1,000 mm Cross-travel approx. 1,600 mm Vertical travel 1,000mm Laeng movement of the extendable spindle 710mm Speed range 10-1.250 rpm Main engine 11kw Speeds 10 - 1,250 rpm in 22 gear stages Extensive machine documentation including user manual ...

Spare parts for Tischbohrwerk VO / Stankoimport / Gertner, Fuhrmeister & CO E.g. complete spindle SK50 Ball screw spindles from the three axes Electric motors, 3 x feed motor, spindle motor complete control Siemens or control cabinet Control Panel with digital device Glass scales Detachable faceplate diameter 360 mm Radial movement of the faceplate-support 100 mm Converter / transformer Angle drilling head Dividing head Spindle diameter ø 110 mm tool holder ISO 50 Technical data of the original machine Travel along approx. 1.000 mm cross travel approx. 1.600 mm of vertical stroke 1,000 mm Longitudinal movement of retractable spindle 710 mm Speed range 10-1,250 RPM Main engine 11kw Speeds 10-1,250 RPM in 22 gear stages Extensive documentation of machine including operating instructions, description, electrical documentation, etc. More photos on request

Machine spindle, precision spindle, double grinding stand spindle, precision spindle for belt drive, belt drive spindle -Manufacturer: GMN, grinding spindle precision spindle for belt drive -Type: TSAV 140s x 270-6212 L 260980 Overbeck 01340 -Receptacle: cone on both sides Ø48/56 mm / thread M40 x 1.5 -Grinding disc holder: Ø 127 mm -Dimensions: see photo technical. drawing -Total dimensions: Ø140 x 450 mm -Weight: 30.3kg

FRICTION BELT DIRECT FROM THE MANUFACTURER! Description: -Chrome leather friction belt for screw press, riveted, new! -Dimensions: 530 mm i.diameter x 50 mm high x 18 mm thick ON request make we the friction belts regarding to your sizes! For all machine types like SMS Hasenclever Berrenberg, Schuler, Weingarten, Vaccari, via, Mecolpress, Osterwalder... We deliver worldwide!

HELMA- model CF-40-copy milling/shaping machine feed thru with work piece return (2) milling spindles- 18" max. distance between the spindles centers- 28" x45" Table - (2) 30mm. work spindles- 10,500 RPM spindles- 4"max. cutting height - vertical adjustment 10 mm.- (2) 7 1/2 hp. spindle motors - 1/2hp. variable speed feed motor 5' to 30' per min.- 2,200 lbs. $7,500

Gildemeister 6 Spindle Lathe AS 32-6 - Spindle stop set-up - Pneum pick-up device. - Zubehoer at an extra cost - Cross hole drilling - Thread cutting gears - Thread cutting device - wahlw. Fraeseinrichtung Querschl. - Spaenefoerderer

WE SELL GREAT CONDITION BIGLIA EQUIPPED WITH COMPLETE TOOLS AND ACCESSORIES , BAR FEEDER LNS MACHINE HAS RUN ONLY 606 HOURS AND IT COMES WITH COMPLETE DOCUMENTATION AND ACCESSORIESS WE ORGANIZE DISMANTLING AND LOADING. FOR CUSTOMER WE CAN ORGANIZE AS WELL TRANSPORT .

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, spindle -Manufacturer: TOS, spindle with nut Z-axis from milling machine FN 32 -Thread: diameter 30 mm -Pitch: approx. 5 mm -Thread length: 450mm -Dimensions: 645/115/50 mm -Weight: 4.1 kg