ring mill used for sale

Light barrier, ring light barrier, frame light barrier, inductive ring sensor -Manufacturer: di soric, ring light barrier, frame light barrier -Type: ORSD 20 P2K-IBS -Detection: metallic and non-metallic parts -Voltage: 10...35 V DC -Number: 10 sensors available -Price: per piece -Dimensions: 97/60/H20 mm -Weight: 0.1 kg/pc.

Medals ring of the wholesale acquirers Frankfurter Versicherungs AG 1961, each with pin, 2 pieces, each in the case

37 x 15 W RGBW with 8° - 63° zoom range capable of generating rainbow effects and tungsten lamps with pre-programmed whites. Includes 4-inch flight case Auction-ID: A1-45485-7

37 x 15 W RGBW with 8° - 63° zoom range capable of generating rainbow effects and tungsten lamps with pre-programmed whites. Includes 4-inch flight case Auction-ID: A1-45485-5

37 x 15 W RGBW with 8° - 63° zoom range capable of generating rainbow effects and tungsten lamps with pre-programmed whites. Includes 4-inch flight case Auction-ID: A1-45485-9

37 x 15 W RGBW with 8° - 63° zoom range capable of generating rainbow effects and tungsten lamps with pre-programmed whites. Includes 4-inch flight case Auction-ID: A1-45485-6

37 x 15 W RGBW with 8° - 63° zoom range capable of generating rainbow effects and tungsten lamps with pre-programmed whites. Includes 4-inch flight case Auction-ID: A1-45485-8

Offer 24407 Technical data: - 2 motor-driven rollers - Hydraulic. Feed of the upper roll Pressure capacity 18 t - Shaft diameter 60 mm - Shaft rotation 6 rpm - Roller diameter 215 mm - Bending performance - flat steel R 300 upright 80 x 15 mm - R 300 flat 120 x 25 mm - Square R 300 50 mm - Round tube R 900 100 x 2 mm - Drive 400 V / 1.5 kW - with: - separate control panel with digital display + foot switch - right / left – run - Lateral straightening rollers - Standard bending kit for flat and angle material - Weight approx. 1200 kg - Space requirement approx. W 1000 x H 1750 x D 1250 mm

The set also comes with the PP70 & the Auction-ID: A1-40104-125

Offer 26001 Technical data: - Horizontal + vertical working position - 3 mot. Driven rollers - hydr. Left lower roller regulation - Hydraulic cylinder pressure capacity 4 t - Shaft diameter 35 mm - Shaft rotation 11 rpm - Roller diameter 132 - 142 mm - Drive 400 V 1.1 kW - Bending capacity approx. - Round tube Ø 800 60 x 1.5 mm - Flat steel Ø 400 90 x 15 mm - Square steel Ø 400 30 mm - With: - Separate control panel with digital display - E – Footswitch in sep. Control panel for right / left run - Standard bending kit for flat and angle material - 6 tube roller sets 22 + 28 + 33 + 42 + 48 + 60 mm - Weight approx. 450 kg - Space requirement approx. W 700 x H 1150 x D 950 mm

Set of 50 new Harry Potter Key Ring Auction-ID: A1-45282-131

Unaudited Auction-ID: A7-45427-219

Important and outstanding design features of the RaptorX-SL with steel substructure in gantry design RaptorX-SL1200/S15 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the traversing height of 300mm in the Z-axis (at no extra charge) extremely large. Special size up to 17,500 mm (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! This way you are able to process plate materials with the greatest stability of the Z-axis just as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or waterjet cutting system, appropriate extensions are available. In the middle range of the machine (between the foot tubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm h ...

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

1 gebr. Corundum disc mill type T4, in vertical version Technical data: Make: KORUMA Type: T4 Drive power: 18.5 KW three-phase motor (completely new drive motor) Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 54 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: shaft sealing ring Side seals: EPDM Connections: Suction side DN 80 DIN 11851 Capacity: 300-1800kg/h Grinding discs: 240mm Gehäuse_ with double sheath for heating/cooling

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. echnische data: External dimensions LxWxH: 1650x1440x1950 mm Weight: approx. 650 kg Clamping surface XxY: 930x630 mm Travel XxYxZ: 900x600x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: appr ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. Technical specifications: External dimensions LxWxH: 1970x2150x1950 mm Weight: approx. 950 kg Clamping surface XxY: 1230x1320 mm Travel XxYxZ: 1200x1300x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reve ...

End Milling Machine Drill Milling Machine working width mm: 3200 Left - right swivelling saws from 0° - 45°. Complete with drilling unit Suitable for machining doors and door posts.

Shell end mills, shell mill cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 105 x 19 mm, cross-cut -Socket: Ø 27 mm -Weight: 0.8 kg

Used Fritsch Pulverisette 19 Year of construction 2014 Good condition 220 V 1.5 KW

For sale is the four-roller grist mill of the Seeger brand, which can be seen in the pictures The mill was in use in a brewery until the end and is functional. The bearing has already been overhauled on the predecessor. Specifications: Manufacturer: Seeger Model: VSM 350 Capacity: 750 kg/h Measurements: see last picture

Stock# U2448-3 Used Jehmlich (Germany) model Rekord BT turbo/cage mill designed in carbon steel. Mill has rotor with diameter 320 mm and insert with screen. Insert has outside diameter 380 mm. Top feeding, via carbon steel hopper. Bottom discharge outlet. Mill is belt driven by an explosion-proof electric motor with a power of 18.5 kW, 2930 rpm, 400 V, 50 Hz. Mill is mounted on carbon steel frame.

For Sale Used Corundum Disc Mill / Mustard Mill MK95

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 33064 Year of construction approx. 1960 Overhauled in 2012Travel distances X: 300 mm Y: 150 mm Z: 330 mmTable size 600 x 210 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 1.1 and 1.4 kWNerg connection 380 volts, 50 Hz- Feed in the X and Y axis- Pinol displacement on the vertical milling head- Fixed angle table- Coolant device with mechanical pump in the machine foot-

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 52185/08 Year of construction 1968Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 250 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.4 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Two motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- Coolant device in the machine foot- Adjacent control cabinet- Counter holder

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 51265/08 Year of construction approx. 1967Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 2100 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.6 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Spindle speed over 2 motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- adjacent control cabinetSpace requirement L x W x H 1100 x

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 28317 Year of construction approx. 1960Travel distances X: 245 mm Y: 150 mm Z: 340 mmTable size 600 x 210 mmSpindle holder horizontal MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 0.8 and 1.1 kW pole-switchableMains connection 380 volts, 50 Hz spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with mechanical pump in the machine base

Milling holders with milling cutters and drills mostly SK40, total 25 parts

Agitator bead mill / bead mill Manufacturer: Netzsch Type LMZ 2 – ZETA system Power 6 kW Weight approx. 280 kg Grinding chamber volume approx. 1.6 litres Regrind volume approx. 0.8 litres Grinding vessel cantilevered attached Agitator speed infinitely adjustable via frequency converter Drive from the motor via belt drive to the drive shaft. Documents available

Good condition Auction-ID: A7-45427-206

Impex ST-D70E Slot Milling Machine Wall Groove Milling Machine Auction-ID: A7-45427-67

Spit F 40 slot milling machine including accessories and 3 milling machines, wall groove cutter Auction-ID: A7-45427-54

BAIER MF 63i Slot Milling Machine Wall Groove Milling Machine Auction-ID: A7-45427-115

End mill, end mill, cutter, shell cutter, milling head, angle cutter, shell angle cutter, angle end mill, prism cutter -Angle milling cutters: Attachment angle milling cutters, prism milling cutters -Type: Ø85 x 35 mm -Hole: Ø 27 mm -Quantity: 1x milling cutter available -Dimensions: Ø 85 x 35 mm -Weight: 0.8 kg

Universal horizontal milling machine – FRITZ WERNER German-made machine tool renowned for its robustness. Universal horizontal milling machine ideal for surfacing, grooving and tooling work. Heavy cast iron construction for excellent stability. Features: Brand: Fritz Werner Type: Universal horizontal milling machine 3-axis cross-table with rotation Horizontal spindle with cutter holder Prismatic slides Integrated mechanical feed box (gears visible in photo) Siemens motor with 400–500 V power supply Manual handwheel controls Disassembled side cover supplied with the machine Complete machine with levers, handwheels and guards Estimated dimensions: Table: approx. 700 × 250 mm Estimated weight: 900 – 1200 kg Status: Antique but functional machine, ideal for mechanical workshop, restoration, or machine tool collector. Wear consistent with age.

manual roll gap adjustment 2x7.5 kW motor Bearing Oil circulation lubrication adjustable roller speed 10-41 rpm BJ 1990

Operating voltage: 380/400 volts with digital positioning display x,y, without feed in y direction, with angular table, work surface with 4 T-slots Mistakes reserved!

Manufacturer Heckler & Koch Model AM 444 A Power consumption: 5.5 KW Voltage: 380/400 Volts Spindle holders for vertical and horizontal spindles: 40 Slide movement x = 410nn y = 350mm z = 400mm Vertical clamping table 850 x 255 mm Feed range 0-1500 mm/min Sliding gearbox 12-stage Speed: 63-2800 rpm Step jump 1.4 CNC control CNC 783/m Dimensions (HxWxD) 1.800x2.400x1.700mm Weight 1,500 kg Ref.Nr PLW18 Mistakes reserved!

Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location  ...