ring mill used for sale

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min ...

Reed 42" x 16" Two Roll Mill. 40HP Motor, with clutch brake. Friction ratio 1.1 Manual Nips. On one-piece steel bedplate.

Hammer mill Manufacturer: NEUE HERBOLD Type HM 450/300 Working width: 300 mm Rotor width: 450 mm Drive: 18.5 kW -NEW MACHINE- size reduction of brittle plastics like electronic scrap, wood scrap, and organic insulation material.

EUROLUX Fruit and vegetable mill with grinding ring Delivery date: approx. 6-8 working weeks/ by appointment Description of the machine: With this mill system it is possible to shred a wide variety of raw materials, adapted to the pressing system and the degree of maturity. The raw material is placed in the funnel of the mill. There is a screw in the hopper that conveys the raw material to the grinder. The raw material is crushed in the grinder and laterally conveyed out of the grinder. Depending on the material to be ground, different knives and grinding rings can be used. You can also change the grinding degree through the speed. If necessary, it is possible to overlay the grinding with inert gas The system can be easily opened and pulled apart for cleaning. The mill is completely assembled and wired on a frame. Two lip seals are installed to seal the grinder on t ...

Qty. 1 Second-hand foil rolling mill plant Mfc.: World Co. (Japan) Type: 6-Hi – Non reversing mill Built: 2002 Application: Copper foil Width: 400 – 700 mm Coil weight: Max. 5 Ton Thickness Entry: 100 – 200 microns Exit: 5 – 100 microns Speed: 0-400/800 m/min. Thickness X-Ray unit AGC system Variable Crown Control Hydraulic servo equipment Main motor power: 200 kW DC Slitter line Mfc.: IHI Width: 150-700 mm Thickness 5 – 50 microns Degreasing line Mfc.: World Co. Strip width: 700 mm Thickness: 10-50 µm Treatment line Mfc.: Kawasaki Built: 2005 Width: 700 mm Thickness: 10-50 µm

Qty 1 x Shaw 60in x 22in two roll mill, Manual nip adjustment, Peripherally drilled rolls (front and back), Hinged guide plates, Sleeve bearings with motorised lubrication, Right angle drive gearbox with 115Kw DC variable speed motor, All mounted on a heavy duty bedplate. Carter stockblender mounted on too. Complete with controls etc and in very good condition.

1 x Heavy duty 2 roll mill Roll dimensions: 2100mm x 665mm dia. Hydraulic nip adjustment, Safety push bars, Peripherally drilled rolls, Sleeve bearings with grease lubrication, Right angle drive gearbox, with Siemens 240kW DC variable speed motor, Strip knives fitted to front roll, Heavy duty fabricated bedplate, Carter stockblender mounted on top.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Manual nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 106kW DC variable speed motor. Very good condition.

Qty 1 x Schwabenthan 200mm dia x 450mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Jahnel gearbox with 10HP motor to each roll (variable speed), Variable friction ratio/roll speeds, Stainless steel interlocked guards and tray. Complete with electrical controls and in good condition. O/a dimensions 2700 x 1500mm

Qty 1 x Schwabenthan 150mm dia x 350mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Even/friction selectable gear ratios, Motor mounted under frame. Complete with electrical controls and in good condition. O/a dimensions 2400 x 850mm.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible coupling, 2 x 68kW DC variable speed motors. Variable friction ratio/roll speeds. In very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 138kW fixed speed motor. Fixed friction/roll speed. In very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible couplings, 2 x DC variable speed motors. Variable friction ratio and roll speed. In very good condition.

Ideal for passage driving with consistent efficiency and for achieving the narrowest grain size distributions in the micrometer range, Maximum operational safety: even the basic version is designed in accordance with the explosion protection directive for installation in ATEX Zone 1 (ExII 2 G cb IIB T3) Grinding media sizes from 0.5–2.5 mm diameter Ideal cooling properties: The forced routing of the cooling water in the outer jacket allows the processing of temperature-sensitive productsEasy handling – each DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Easy handling – any DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Grinding tank : 50 litres Power : 45 kW Voltage : 380 V Weight : 1050kg

Various millstones

Two Roll Mill 1m wide Hydraulic Nips With motor and gearbox AEG motor, 380volts, 107amps, 55kw, 1475rpm, 50 cycles Unidrive Gearbox manuf: Santasalo, Type 3KSV70, Year 1977, Weight 1500kg Lunn Safety gear fitted front and back of Mill Complete with control panel All mounted on a one piece bedplate Compact

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min ...

KAAST Millex VPlus 7 CNC machining Centre way back in 2011 complete with Siemens Controller 802S

- workpiece diameter d680 - max workpiece length 3400 mm - max working lengths 2600 mm - with discs (d1100 mm) - required electric capacity 60 kW/h - under power, in use

Bead mills Manufacturer: Bachofen AG (CH) Type: Dyno-Mill KDL-Pilot 3 items on stock No.: 1) 910969; 2) 860739; 3) 840338 Power: 3.3 kW in Eex protectioin very good condition with various spare parts LWH: 650 x 500 x 500 mm

Laboratory bead mill Manufacturer: Bachofen AG Type: KDL No.: 920235 Power: 1.85 kW in explosion protection shear tools in ceramic very good condition with various tools and spare parts LBH mill: 650 x 650 x 520 mm LBH box: 600 x 400 x 430 mm

Drive : 75 KW Dimensions : L 3800 mm x W 1600 mm x H 2200 mm Weight : 3900 kg.

Drive : 110 KW Dimensions : L 2500 mm x W 1300 mm x H 1800 mm Weight : 2800 kg

Qty.1 Second-hand milling (scalping) line Mfc.: Torrington Type: 30" Slab Miller Strip width: 30” – 762 mm Cutter Speed: 500 rpm Metal speed: 18 fpm (1.9 m/min.)) Capacity: min. ¼” max. 1-1/4” Thickness Entry thickness range: 13 – 20 mm

Key data: 190 mm, 450 mm

available Lab Mill! Description attached !

Exchange units for contour milling HOMAG

Key data: 150 mm, 300 mm

Two Roll Rubber Mixing Laboratory Mill Manuf.: JRD Bipel 300mm x 150mm rolls Roller type bearings Nip fully guarded Motorised nip adjustment Roller speed variable up to 32 rpm Friction ratio 12:1 Grease lubrication Roller reverse system

Key data: 500 mm, 200 mm

Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Spindle: Ø 80 mm Cone CM3 Spindle exit: 120 mm Spindle speed: from 95 to 3200 RPM Table size: Length 730 mm x Width 210 mm 2 speeds motor Motor power: 1,5 Kw Straight head Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Weight: approx 350 KG

Manufacturer: RASOMA Type of Machine : End Milling Machine Year of Manufacture: 2018 Total Weight: 16,000 kg Voltage: 3x400V, 50Hz Control Voltage: 24V DC, 230V AC Rated Current: 92 A Maximum Fuse: 125 A Power Rating: 62 kW Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 1000 mm, 500 mm, 530 mm

Like new: X-axis: 1,000 mm Y-axis: 500 mm Z-axis: 530 mm Table dimensions: 406 x 1,372 mm Spindle mount: BT 40 Spindle speeds: 1 - 8,000 rpm Control: Fagor Equipped with: - Coolant system -Operating instructions Country of origin: Taiwan Engine power: 10 hp Machine LxWxH: 2,900 x 2,280 x 2,550 mm Machine weight: 3,100 kg

Notching cutter Comall Type: Mill One

Key data: 650 mm, 2100 mm

W&P 2100mm (84”) x 650mm (26”) Two Roll Mill Manufacturer: Werner & Pfleiderer Periphery drilled rolls Both rolls smooth Roller bearings Individual motors driving each roll (2 motors) Variable friction and nip Hydraulic nip Knife cutter under roll Nip guides on top of Mill 1 piece bedplate Compact design Fully rebuilt and refurbished by Dewiko Germany in 2001

Offer 25434 Specifications: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Quill stroke 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

Offer 25434 Specifications: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Quill stroke 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

Year of construction 2012 Siemens Control 840D Remote diagnostics and teleservice On-screen maintenance instructions 5-axis milling package Rigid table with integrated rotary table Kessler DTE 520 max. speed 1000 rpm Travel X/Y/Z 2000/685/630 mm NC swivel head with headstock NC swivel axis +- 100° - direct measuring system Speed range 20,000 rpm Direct displacement measurement systems Tool changer with 92 places Rapid traverse 40 - 40 - 40 m/min Axle acceleration 0.25 g Chip conveyor (hinge belt) Coolant system HL 450 / 900 (IKZ) Chip gun Coolant recooling unit Additional tub flushing Machine preparation for air through the spindle Extraction for the working area Safety package MILL 2000 reinforced cab with safety washers Zero-point clamping system NSL tur 570-5-Z for DTE 520 Mitfahrende Chiron Lasercontrol Single F295 Tool breakage detection Probes Renishaw OMP ...

Offer 25434 Technical data: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Autom. Quill feed - Quill stroke - Wind cutting device 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

This Mazak SLANT TURN 40N - ATC Mill center 1500 was manufactured in 1986. A robust turn-mill centre, it offers reliable performance for various machining needs. Consider the opportunity to buy this Mazak SLANT TURN 40N - ATC Mill center 1500. Contact us for more information.

General SKU446W1483 LocationBarneveld CEcheck Main Features Motor0.75 KW Inlet diameter10 mm Specified Features - Jet Mill Grinding room sizeDia. 100x16mm InletDia. 10 mm Motor0,75 kW, 230/400 volt, 1400 rpm, (Ex) With variable speed drivecheck Speed18/59/147 rpm Jet Mills MaterialStainless steel 1.4306 (304L) General MakeMicro-Macinazione SA TypeLU 100 IR BD Number0106100.1046.2070 Year of construction2006 Mounted on wheelscheck With switchcheck Floor space0,80 x 1,40 m Total height2,15 m Weight490 kgJet MillsCatalysts & fillersFeed additivesFood additivesSugarAnimal feedDyes & pigmentsMinerals & inorganicTea, herbs & coffeeMicromacinazioneMills > Jet MillsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarIndustries > Food & Feed > Animal feedIndustries > C ...

Key data: 1000 mm, 450 mm

Comerio Two Roll Mill 1m (40”) wide x 450mm diam. Motorised nips Tray fitted beneath Mill rolls Motor mounted beneath roll AC 3-phase 400V Complete with Control Panel

Used colloid mill made by JM Series Colloid Miller. New 2008. 11kW motor.

General SKU223Y099 MakeAlpine TypeAFG-100 Year of construction1985 Main Features Motor1 KW Inlet diameter35 mm Width100 mm Specified Features - Jet Mill Grindercheck Rotor sizeø 50 mm Grinding room sizeø 100 mm With hoppercheck Inletø 35 mm Motor0,25 kW, (380 V, 2860 rpm (Ex)) With variable speed drivecheck Jet Mills MaterialStainless steel 1.4541 (321) General LocationBarneveld Mounted on wheelscheck With switchgear(as is) Floor space1,70 x 1,10 m Total height2,40 m Extra information Extra SpecificationsWith K-Tron dosing screw, type T20A, 0.25 kW:Becker vacuum pump:Alpine stainless steel filter, type K6R, 2.4 m²:with spare rotors and parts:Jet MillsCatalysts & fillersFeed additivesFood additivesSugarAnimal feedDyes & pigmentsMinerals & inorganicTea, herbs & coffeeAlpineMills > Jet MillsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed >  ...

Fanuc 6-assig robotfreescentrum voor aluminium en staal Fanuc R-2000-B/165F CNC: R-30iA CONTROLLER X-beweging van de robot op de rails: 10.500 mm Uitgeschoven robotarmbereik (links en rechts): 3045 mm gt; Maximale werkstuklengte indien het een profiel betreft: 15 meter gt; Maximale werkstukafmetingen zonder uitgeschoven arm: 10.500 x 3045 mm gt; maximale werkstukhoogte: 3500 mm gt; Maximaal gewicht dat aan de robot kan worden bevestigd: 165 kg Gewicht van alleen de robot: 1200 kg Gereedschapswisselaar gemonteerd op rails met 13 gereedschapsposities: - 12 live tools - 1 meetsonde Freeskop: TMA6 17/2 Snelheid: 1 gt; 12.000 tpm ISO 40 - 11 kW Gewicht: 45 kg Technische kenmerken: • Automatische gereedschapswisseling (ATC). • Geïntegreerde thermische beveiligingssensor (motoruitschakeling bij 90 °C). • Pneumatisch gereedschapsklemsysteem (enkelwerkende cilinder met veerretour): – Ci ...

Qty. 1 Second-hand 4-Hi Skin Pass Rolling Mill Mfc.: Sir James Farmer Norton Type: 4 - High Temper Mill 318/610 x 710 mm Built: 1977 Stopped: 2025 Strip Width: 300 – 650 mm Thickness: 0.1 – 1.5 mm Max. Tensile Force 2.860 kg, Coil weight: 10 T

Qty. 1 Second-hand 2-Hi Skin Pass Rolling Mill Mfc.: Sir James Farmer Norton Type: 2 - High Temper Mill 318/610 x 710 mm Built: 19 Stopped: 2025 Strip Width: 300 – 600 mm Thickness: 0.3 – 4.0 mm Max. Tensile Force 3000 kg, Coil weight: 10 T

General SKU391T1170 LocationBarneveld MakeA. Smits constructies BV Main Features Motor7.5 KW Inlet diameter70 mm Width240 mm Specified Features - Hammer Mill Hammer millcheck Rotor sizeDia: 240x100mm Grinding room sizeDia: 320x105mm Moving hammerscheck Hammer width4mm With sieve cage2x (ø 10 mm : 8 x8 mm) Housing dimensions Dia: 325x400mm InletDia: 70mm Motor7,5kW, 400/600Volt Speed1445rpm Hammer Mills MaterialStainless steel 1.4301 (304), Stainless steel 1.4306 (304L) General TypeSmimo-MI-100L No.010.00.01.001 Year of construction1999 Mounted on framecheck With switchcheck With switchgear(as is) Floor space2,1 x 0,55 m Total height1,2 m Weight350 kgHammer MillsOther feedA.Smits constructiesMills > Hammer MillsIndustries > Food & Feed > Other feedBrand > A.Smits constructies What you can expect from Foeth: -- Machine is in working condition -- At a reduced ...

General SKU357X1335 LocationBarneveld CEcheck MakeNetzsch-Condux Main Features Motor3.7 KW Inlet diameter180 mm Specified Features - Jet Mill Motor1,5 kW (380 volt, 12.000 rpm) With variable speed drivecheck General TypeCGS 16/V-DA DSF / CFS 8/HD S No.7043 Year of construction1998 Mounted on framecheck With switchgear(as is) Floor space4 x 1,4 m Total height4,5 m Weight3300 kg Extra SpecificationsTechnical specs (CGS 16/V-DA DSF —&:nbsp:opposed jet mill):Throughput: ca. 10 kg/h Classifier wheel outer diameter: 120 mm Dip tube diameter: 45 mm Max classifier speed: 12,000 min⁻¹ Max gas temperature: 60 °C Drive power: 1.5 kW Drive speed range: 3,000–12,000 min⁻¹Inlet diameter: Dip tube diameter 45 mmTechnical specs (CFS 8/HD-S —&:nbsp:fine classifier): Min speed: 600 min⁻¹ Max speed: 12,000 min⁻¹ Max operating temperature (T_max): 60 °C Drive power:  ...

General SKU286M327 MakeALPINE A.G./ Henco &: Co Type:ATP200 / 4ATP: No.:unknown, manufacturer tag is missing: Year of construction±2006 Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Jet Mill Grinder:Multi-wheel air classifier Mill: Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm Jet Mills MaterialCeramic, Mild steel General Mounted on framecheck LocationBarneveld Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgJet MillsCatalysts & fillersFeed additivesFood additivesSugarAnimal feedDyes & pigmentsMinerals & inorganicTea, herbs & coffeeHosokawa AlpineMills > Jet MillsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarIndustries > Food & Feed > Animal feed ...

General SKU286M326 MakeALPINE A.G./ Henco &: Co. Type:ATP200 / 4ATP: No.:unknown, manufacturer tag is missing: Year of construction+/- 2006 Mounted on framecheck Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Jet Mill Grinder:Multi-wheel air classifier Mill: Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm Jet Mills MaterialCeramic, Mild steel General LocationBarneveld Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgJet MillsCatalysts & fillersFeed additivesFood additivesSugarAnimal feedDyes & pigmentsMinerals & inorganicTea, herbs & coffeeHosokawa AlpineMills > Jet MillsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarIndustries > Food & Feed > Animal f ...

General SKU286M325 MakeALPINE A.G./ Henco &: Co Type:ATP200 / 4ATP: No.:manufacturer tag is missing: Year of construction±2006 Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Jet Mill Grinder:Multi-wheel air classifier mill: Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm Jet Mills MaterialCeramic, Mild steel General Mounted on framecheck LocationBarneveld Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgJet MillsCatalysts & fillersFeed additivesFood additivesSugarAnimal feedDyes & pigmentsMinerals & inorganicTea, herbs & coffeeHosokawa AlpineMills > Jet MillsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarIndustries > Food & Feed > Animal feedIndustrie ...

X-axis: 550mm, y-axis: 305mm, z-axis: 460mm, milling table dimensions: 800x320mm, T slots: 14mm/3 pieces/distance 100mm, max. table load: 300kg, spindle to table distance: 100-600mm, number of tool positions: 12, max. tool diameter: 70mm, max. tool length: 300mm, max. tool weight: 6kg, tool change time (T to T): 7s, milling spindle power S1 operation: 5.5kW, power S6 30% operation: 7.8kW, torque S1 operation: 35Nm, torque S6 30% operation: 50Nm, spindle holder: ISO 40/BT40x45°, coolant system pump output: 650W, tank capacity: 120l, compressed air minimum connection pressure: 0.6MPa (6bar), air consumption: 0.1-0.15m³/h at 0.6MPa, compressed air quality: ISO 8573.1 class 2, compressed air connection: 3/8 inch, connected load: 12.5kVA, control: Siemens SINUMERIK 808D MILLING, length: 2164mm, front width: 1520mm, side width: 1860mm, height: 2200mm, door opening range: 760mm, door opening  ...