ring blower used for sale

NEW MACHINE With Formatschiebetisch 2, 60m Saw blade 250-315 mm Swivel: 90 °-45 ° Planing width 410 mm 4 cutter Blade (no setting more) Dressing table length of 1800 mm Clearance height of 4-225 mm Milling cutter: 90 °-45 ° swivel to the rear Blower rpm: 3000/4000/5000/6000 / 8000 and 10000 RPM Vertical lift 160 mm Engine power: 3 engines 3 KW400 V (4,0 PS) S1 100% continuous operation WJ-500300 Special price: NET Options: Before scoring unit with motor Guide fence 900 mm Integral safety rail 500 mm Westcott Chuck 0-16mm Milling Eccentric clamp Right - and left-hand rotation (BUR) Engine 4.0 KW (5.5 HP) S1 100% Planer blade 410 HSS G & WJ-BA-410-HSS

AT-Motoren alle sofort ab Lager lieferbar mit Garantie MIW GmbH Motoren-Instandsetzungs-WerkNord-West-Ring 8 27404 Zeven-Germany Tel.0049(0)-4281-950583 Fax.0049(0)-4281-950585 email=info@miw-zeven.de

Material: stainless steel Weight: 900 kg Dedusting filter Surface 31,2 m² Accessories: blower, cell wheel air-lock. Very god condition! You can also get the entire system with all components.

FOR SALE... NOHAB DIESEL F30 NEW & GENIUE SPARE PARTS AT TURKEY. HAVE A GOOD DAY SIR; WE VE NEW UNUSED SPARE PARTS OF NOHAB DIESEL F30 ENGINE AT OUR STOCK WE'VE MORE THAN 198 NEW ITEMS. PLS FIND SOME SELECTED ITEMS AS BELOW WE VE ALSO RECON SPARE PARTS. RECON PISTON 4 GROOVES (4 PCS piston SCHMIDT & 1 PCS MAHLE) 5 PCS RECON CYLINDER LINERS (WITH CLASS STAMPED) 5 PCS RECON CYLINDER HEADS FULL (WITH VALVES & SPRINGS) LLYODS STAMPED 2 PCS RECON FUEL INJECTION PUMPS BOSCH 12 PCS RECON OIL PUMP 1 PCS OVERHAULED COMPLATE FUEL INJECTORS 10 PCS RECON FUEL FEED PUMP 1 PCS . IF YOU HAVE ANY QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. PLS FIND SOME NEW SPATE PARTS ITEMS LIST PISTON 4 GROOVES PISTON SCHMIDT 9198100965 1 LINER DNV TESTED ...

SUB: FOR SALE... MITSUI MAN B & W 6L 60MCE NEW MAJOR PARTS . HAVE A GDY SIR; WE VE NEW UNUSED MAJOR PARTS OF MITSUI-MAN B & W 6L 60MCE ENGINE. PLS FIND LIST AT BELOW. IF YOU'VE ANY FURTHWER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. ALL PARTS READY TO INPSECT AND TRANSPORT. NEW CYLINDER LINER 2 NEW PISTON HEAD 1 NEW WATER JACKET 1 RECON FULL CYLINDER HEAD 1 NEW INJECTOR ATOMIZER 3 NEW SCRAPER RING 332C F/G 4 NEW SEALING RING PACK 332C / C 2 NEW SPREADER RING 332 CE 8 NEW STUFFING BOX O-RING 3 NEW PISTON ROD O-RING 12 PISTON STOPPER 332B 14 Capt. Ayhan Ugurluba Best Regards ; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

1 x Carter model MK3 Plus Banbury internal mixer, Serial number: 8-77, Year: Sept 1977, Chamber volume 90litre, approx batch weight: 85kgs, pneumatic hopper, S.S.A. type dust stops, Oil cooled roller bearings, hydraulic drop door + linear actuator, cored rotors with rotary joints fitted, flood cooling to body, standard bullgear drive with 150kW, 495rpm, 3ph,m 50Hz, 380/415V slip ring motor and starter. Key interlock safety system. Complete with all operator controls, pneumatics, hydraulics etc and in good condition.

Specifications (manufacturer): -Manufacturer: Miele / Germany -Model/type: T 6250 - Fabrikationsnr.: 25375347 -Part No.: 52625001 -Built in _ -electrical connection: 3 ~ 380V 50 Hz 10.0 A -electric power consumption approx. 14.30 kW -Re circulation dryer exhaust air recirculation with automatic reversing system -Drying capacity: 10 kg in 35 min cupboard dry -electronic measurement of residual moisture -large filter with optical display -Crease protection -Capacity dry: 10 kg / filling ratio 1:25 / 1:20 -Evaporation performance max 13,5 L / h -2 Motors (drive and blower) -Drum capacity: 250 L -Heating capacity: 13, 5kw switchable to 9kw -Exhaust air connection 150 mm -Dimensions (Lxwxh): approx. 900 x 805 x 1390mm -Weight 147 kg

We offer an Exchange overhault engine Caterpillar type: C13-LGK... Engine is general-overhault with guarantee. Also for chrusher contact: MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven, Germany Phone:0049 (0 4281-950583 fax :0049 (0)4281-950585 info@miw-zeven.de email:info@miw-zeven.de abc. miw-Zeve

FOR SALE SULZER ASV 25/30 ENGINE NEW GENUINE SPARE PARTS AT TURKEY HAVE A GOOD DAY SIR. WE HAVE MANY NEW GENUINE SPARE PARTS OF SULZER ASV 25/30 ENGINE AT OUR STOCK. WE VE 200 ITEMS AT OUR STOCK. PLS FIND 100 ITEMS WITH PARTS NUMBER ON BELOW. IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US.. NO. ONE - SULZER 12 ASV 25/30 PART NO. 1 NEW CYLINDER LINER 5001001 1 PCS 2 NEW PISTON 3404001 4 PCS 3 NEW CAM SHAFT SECTION 10107001 3 PCS 4 NEW COMPLETE LUBRICATION PUMP 30004 K 1 PCS 5 RECON CONNECTING ROD 1 PC 6 NEW LOWER CRANK BEARING D = 225 MM 02103 B 7 PAIRS 7 NEW UPER CRANK BEARING D = 225 M 02103A 7 PAIRS 8 NEW BEARING SHELL HELPED D = 195MM 03004A 12 PAIRS 9 NEW THRUST BEARING HELPED 2103001 2 PAIRS 10 NEW BOLT WITH OVERSIZE 701007/0VERSIZE 12 PCS 11 NEW BEARING SHELL HELPED D = 195MM 03004A 12 PAIRS 12 NEW BEARING SHELL HELPED D = 194.5MM 03004B 511200- ...

MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany info@miw-zeven

All other original spare parts are available immediately from stock. o.g.Price are applicable. Freight+Packaging+law. Tax Please check the number of teeth ! MIW Ltd. Engine Repair Plant GmbH North-West Ring 8 D-27404 Zeven-Germany Tel:0049(0) 4281 950583 Fax:0049(0) 4281-950585 e-mail:info@miw-zeven.de abc.miw-zeven.de

THE quick scope CNC offers the following advantages: coaxial -, through - and ring light illumination allows the user an optimal illumination of the workpieces to be measured. The powerful QSPAK software-based Windows® is easy to use and offers a wide range of measurement and analysis capabilities. Functions such as zoom, auto-focus, repeat mode, one-click Tools, graphical representation and 48 different macros solve measurement tasks quickly and easily. It only the joystick is. • ï?· measuring range: (X, Y, Z axis) 200 x 250 x 100 mm • ï?· type: QA 359 • ï?· resolution μ m: 0.1 • ï?· sensor type: color CCD • ï?· lenses: zoom type • ï?· magnification (optical): 0, 5 x-> 3, 5 x • ï?&mi ...

Cylinder head new with valves mounted . We have a lot of recon engines at stock now.Please contact us... MIW GmbH Nord-West-Ring 8 D-27404 Zeven/Germany info@miw-zeven

Spindle speed continuously variable electronically 40-4000 RPM Thread cutting capacity max M8 Thread-cutting depth digital depth display digital speed display digital drill depth indicator Drilling depth stop on stop ring Feed / hand Table height with rack and pinion Duration / standard ALB ear performance steel Ã? 13 mm / 15 mm Depth 60 mm Projection 225 mm Column diameter 60 mm Usable table area (B x L) 330 x 250 mm Machine dimensions (W x D x H) 420 x 450 x 860 mm Engine dimensions (with VP) (W x D x H) 452 x 700 x 1130 mm Weight 62 kg max distance spindle/table/stand 300/ 360 mm Motor alternating current with frequency inverter 230 V, 0,54 kW Warranty: 3 years Free House including packaging (Germany only)

Engine is a general-overhaulted exchange engine with 12-month guarantee. 1x at stock one available. MIW GmbH Motoren Instandsetzungs Werk Nord West Ring 8 D-27404 Zeven Germany Tel:0049 (0)4281-950583 Fax:0049 (0)4281-950585 email:info@miw-zeven.de abc.miw-zeven.de

Standard equipment Robust, high-quality and inclined rotation hood for easy reading of the speed LED lighting Easily adjustable and ergonomic drill depth stop Infinitely variable speed control Connection cable with plug (1,2 m) Undervoltage release Drill protection with Electr. Hedging Thermal overload protection Emergency off pushbutton Weight in kg: 30 Engine kW: 0.45 Rotary / alternating current: alternating current in V: 230V Speed 1/min: 250-3000 Drill capacity mm: 10/12 Thread cutting capacity: Max M6 -Steel Ã? 12 mm -Aluminum Ã? 20 mm -Softwood Ã? 40 mm -Drilling depth 50 mm -Throat depth 180 mm -Column diameter 50 mm -Usable table area (B x L) 180 x 260 mm -T - slot size number 2, distance 100 mm Dimensions width 12/20 mm Spindle B-16 Digital speed display Drilling depth indicator scale Drilling depth stop adjustable stop ring fast Feed by hand Steel &At ...

We offer a general overhault exchange engine with 12-month guarantee with starter+altenator . We are an Agco Sisu diesel service partner and obstruct / sell only original spare parts. Please contact us: MIW GmbH Motoren Instandsetzungs Werk Nord West Ring 8 D-27404 Zeven-Germany Tel:0049 (0) 4281-950583 Fax:0049 (0) 4281-950585 e-mail: info@miw-zeven.de abc. miw-zeven.de

SUB: FOR SALE... NEW & RECON ORIGINAL PARTS L 48/60 AT STOCK HAVE A GDY SIR; WE'VE MANY NEW OR RECON SPARE PARTS OF MAN L 48/60 AT OUR STOCK. PLS FIND DTLS AT BELOW. MOST OF THEM SUPLIED FROM YOU IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. 1 NEW CYLINDER LINER X 1105003-7519 1 YOU 2 RECON EXHAUST VALVE 1140441 D 449216 1 3 RECON EXHAUST VALVE 11408100120560 1 5 RECON EXHAUST VALVE 114071002050560 1 6 RECON EXHAUST VALVE 1140441144 1 7 RECON EXHAUST VALVE 114071000960560 1 8 RECON EXHAUST VALVE 114061002560560 1 9 RECON EXHAUST VALVE 114091003053060 1 10 RECON EXHAUST VALVE 114071009960560 1 11 RECON EXHAUST VALVE 114091000500560 1 12 RECON EXHAUST VALVE 114071000950560 1 13 RECON EXHAUST VALVE 11406102640560 1 14 RECON EXHAUST VALVE 11408100120560 1 15 RECON EXHAUST VALVE 61953016796 1 16 RECON EXHAUST VALVE 6051953004859 1 17 RECON INLET VALVE 01 ...

We offer general-overhaulted exchange engines with 12-month guarantee Engines incl.starter+altenator, with test bench run ex works immediately available. We are to authorised AGCO Sisu power Service-Parter in the north Germany MIW GmbH Nord-West-Ring 8 D-27404 Zeven-Germany Tel: 0049 (0) 4281-950583 Fax: 0049 (0) 4281 950585 e mail: info@miw-zeven.de abc.miw-zeven.de

Piston recon 4 ring

- Hobelbreite 50 - 400 mm - Hobelhöhe 10 - 300 mm - stufenloser Vorschub 5-25 m/min. - Spindel FI 50 mm - Drehzahl 6000 U/min - 6 Spindeln - untere Welle min. / max. Werkzeug FI 160 /180 mm - rechte Welle min. / max. Werkzeug FI 160 /230 mm - linke Welle min. / max. Werkzeug FI 160 /230 mm - obere Welle min. / max. Werkzeug FI 160 /230 mm - 2. obere Welle min. / max. Werkzeug FI 160 /230 mm - untere Welle min. / max. Werkzeug FI 160 /230 mm -max. Sägeblattdurchmesser 2. obere Welle 300 mm Motorleistung: 1. unten 15,0 kW 2. rechte 11,0 kW 3. linke 11,0 kW 4. oben 15,0 kW 5. oben 15,0 kW 6. unten 15,0 kW - Motor Vorschub 11,0 kW - Motor Höhenverstellung 1,5 kW - Gesamtanschluss 94,5 kW - Jointer obere Wellen und unter Welle - horizontale Wellen mit Gegenlager / Hydrospannung - obere Welle elektrisch verstellbar mit Vorschubsystem mit Digitaler Anzeige - linke Welle elektrisch verstellb ...

2 pieces Mosca strapping machines, bundling machine - used - : Price per piece from location: 2,295.- EUR (net)! Manufacturer: Mosca Type: RO-TR-13 Year of construction: 1997 Welded closure: Thermal Bandwidth: 5-9mm Belt voltage: Infinitely adjustable Belt unwinders: Belt coils inside- 200 Weight: 415kg mains voltage 200-440V Airpressure: 6 bar Air consumption: 5.4l/stroke noise emission: 75 dB measured according to DIN 45635 pressing pressure: downward max. 650N at 6 bar / upward max. 100N at 2 bar Afield: The fully automatic strapping machine for almost all packaging areas and package sizes: Width: 100mm - 550mm Length: 150mm - 600mm Height: 5mm - 400mm Machine Description: Fully Automatic Plastic Strapping Machine for Poly-Propylene Packaging Tapes. High connection voltage due to minimum distance from the transport plane to the locking unit. Transport speed of 0.1 -0.8 m/sec  ...

Horizontal side channel pump Materials: - Case: 1.4581 - Wheels: 1.4408 - Wave: 1.4571 Housing sealing: single-acting sliding ring seal, carbon/silicon carbide/viton Version A6: Pump mounted on base plate elastically coupled with 1.35 kW IEC standard rotary current motor Pressure: 2 bar Power: 800 l/h Revolutions: approx. 1,450 rpm Rated frequency: 50 Hz Engine power: 230/400 V Protection class: IP 55 Type of protection: E Ex eII T3 Type of construction: B3 Pumps partly unused, therefore in very good condition!

MWM TCG 2016 V 12 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

Mobile pneumatic conveyor unit for powdery products, on base frame, with stainless steel feeding hopper (700 mm x 700 mm, incl. safety grid inside), blow-through rotary vane in stainless steel (200 mm Ø, 0,55 kW drive) by Seeger, Aerzener GMA-blower incl. Drive, air filter, compensation tank and switchgear cabinet.

MWM TCG 2016 V 16 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

General of overhault engine immediately available from stock Contact= MIW GmbH Nord-West-Ring 8 D-27404 Zeven/Germany Phone: 0049(0)4281-950583 Fax : 0049(0)4281-950585 info@miw-zeven.de abc.miw-zeven.de

Vibration machine for drying and sieving of sand. The machine consists of a welded construction mounted on conveyor elements, with 2 Electric Vibrators as drive. An electric heater with built-in blower is located at the end of the conveyor belt. Below the conveyor trough a sieve box is mounted in the area of the sand outlet. The dynamic forces that are emitted from the machine to the ground only about 100 N amount due the shock mount on the spring elements. The amplitude and therefore the flow rate can be set by adjusting the unbalances on the motors. The machine is due to the simple design nearly stör - and maintenance-free. The static frequency converter has a range of 10 to 32 Hz Length: 3.5 m Width: 1.2 m Height: 1.4 m Weight: 220kg

We offer from stock Zeven: DEUTZ F6-8L 613 cylinder heads completely with valves + spring newly assembled. MIW GmbH Motoen-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven / Germany Phone: 0049(0)4281-950583 fax : 0049(0)4281-950585 info@miw-zeven.de abc.MIW-ZEVEN

description: Type: MAN 2848 LE gas engine for combined heat and power Power: 255kWe/1,500 rpm information: The engine delivery range does not include a water pump, an ignition system or a gas mixing system! Standard scope of delivery â?¢ 8 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.293 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve s ...

description: Type: MAN 2876 LE302 gas engine for combined heat and power Power: 190kWe/1,500 rpm Standard scope of delivery â?¢ Rows â 6 cylinder four-stroke â gas engine based on MAN â D28 â?¢ Single cylinder heads, high-alloyed valve seat rings and valves, form-forged crankshaft with counterweights, wet cylinder sockets, piston cooling over oil spray nozzles â?¢ Compression ratio 11:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with multi-cyclone oil separator, engine ventilation must be integrated on the customer side â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2,412 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal & ...

Exchange aggregate-gene set with engine and generator overhauled on basic frames Scope: -AT crank case -AT crankshaft including new storage -Pistons Squisch (new variant) -Running jacks with coca striping ring (new variant) -AT cylinder heads -AT pleuelbars including storage -Abgasturbolader overhauled with conversion jet ring -Oil pump new -Charge air cooler repaired -Throttle -Gas mixer repaired -Spark plugs new -Compensators new -Exhaust exacensers new -Valve pestle new -Sealing set engine new -Rotary vibration absorbers new -UPF filter crank room ventilation new -Air filters new -Rubber element for clutch new -Generator Marelli MJB 400 repaired Pfandwerte on request: The deposit value depends on the scope of delivery and the condition of the parts returned.

Engine power: 400V 2 PS S1 Planing width 260 / 300 mm Drum: 3-Tersamesserwelle Dressing table length: 1040 mm / 1200 mm Clearance height: 3-200 mm Formatschiebetisch: 1070mm be hemline Cutting height: 80 mm Saw-45 ° 90 ° swivel Milling machine 90 ° starr Blower rpm: Speed of 4200-6300 rpm or 5000-7500 RPM G & STÜ 5500027 260mm planing width! SPECIAL PRICE NET OF 3599.- G & STÜ 5500030 300mm planing width! SPECIAL PRICE NET OF 3999,-

Beer tanks / fermentation tanks and storage tanks 118.700 Liter Brand new cylindroconical Beer tanks / fermentation tanks and storage tanks designed for installation in stainless steel V2A room, WSt 1.4301 IIIc Capacity: 118.700 Liter Total content approx. 118.700 ltr. Net content of fermented about 87,700 liters. Inner diameter about 3,900 mm Outer diameter approx. 4,100 mm Cyl. Height about 8,500 mm Eaves height approx. 13,500 mm Total height approx. 14,100 mm Ground clearance: 1,280 mm Perm. Operating pressure: 1 bar Perm. Operating temperature: 40 ° C Perm. spec. Weight: 1.05 kg / dm³ Cooling jacket: Cooling zones on the cylinder approx. 4 x 16.5 m² (total approx. 66 m²) Cooling zone cone approx. 10.5 m² Perm. Operating pressure: 4 bar Perm. Operating temperature: -10/40 ° C Insulation thickness: 100 mm Material: Cr-Ni steel, WSt. ...

EUROLUX Fruit and vegetable mill with grinding ring Delivery date: approx. 6-8 working weeks/ by appointment Description of the machine: With this mill system it is possible to shred a wide variety of raw materials, adapted to the pressing system and the degree of maturity. The raw material is placed in the funnel of the mill. There is a screw in the hopper that conveys the raw material to the grinder. The raw material is crushed in the grinder and laterally conveyed out of the grinder. Depending on the material to be ground, different knives and grinding rings can be used. You can also change the grinding degree through the speed. If necessary, it is possible to overlay the grinding with inert gas The system can be easily opened and pulled apart for cleaning. The mill is completely assembled and wired on a frame. Two lip seals are installed to seal the grinder on t ...

Qty. 1 Second-hand power plant including boiler (BFB – boiler: bubbling fluidized bed) Mfc.: Foster Wheeler, Siemens, Raumaster, YIT Corporation, Honeywell, Built: 2001, 2002, 2006, 2009 Revision: 2009 Insulation removed in 2018 BFB Boiler – 88 MW Steam turbine – 22.5 MW Main Steam Cycle BFB boiler K7 – Some parts removed and storaged indoor at the paper mill area – Boiler is made electrically safe (cables cut) – Dry conservation ongoing since 2014 (tubes filled with nitrogen, dry air circulation) – Steam Turbine VP4 (in storage) Generator (in storage) Power Plant – Function Primary function is to produce steam for the Paper Mill reliable and economically Secondary functions: Burning of the Paper Mills (PM) waste wood Incineration of sludge from the PM: WWTP Production of flue gas to the PCC (precipitated calcium carbonate) plant Electricity product ...

Dynamic airflow separator (sifter) for minerals, cement, recycling etc., rotor diameter: 700 mm, turbine wheel occupied with 64 blades / turbine blades, outer ring occupied with 36 manually adjustable counter wings, incl. drive. In very good condition.

The plant is 6 months old and is being abandoned due to conversion of production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. There are 2 containers of wood chips/firewood (35m3) to be connected. NOTE TO PICTURES: Plant can only dry 2 containers and is half as wide as shown on pictures. Construction analogous to drying system for 4 containers! Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit ( ...

High-efficiency dynamic classifier (separator) for minerals, cement, recycling etc., rotor diameter: 700 mm, turbine wheel equipped with 64 blades, outer ring equipped with 36 manually adjustable counter-blades, incl. drive. In very good condition.

Wood chip dryer, firewood dryer for 4 containers The plant is abandoned due to conversion of the production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit (radial fan with motor 11kW) Heater 480kW Funnel for air flow incl. 4 shut-off valves and & 4 pieces connections Power con ...

Used Final View Labels-MHD Control Device No. 2TG024887 Year built: 2010 Out of service since 2016 Device specification: Application (B/h) 36,000 Installation location behind the labeling machine Task: Container insection - underfilling and overfilling Container inspection - safety ring Detection in the labeler - hull label Recognition in the labeler - back label Accessories SPECTRUM refrigerator Follow-up error labeling machine takes stop signal to line MHD control in the labeling machine Messbrück container inspection version left Trigger bridge oblique lysread lid inspection of the retaining ring Discharge signal control One-segment Heuft Pusher Pusher PSH BG0109 The device has been stored properly by the manufacturer

Pocket-type dust filter with 15 m? filtering surface, cleaning by 0,25 kW vibrator. Designed as silo-based filter for overpressure silos, incl. many new parts. Filter can be retrofitted with blower (0,75 - 2,2 kW), feet and dust collectionbin as an independent dedusting unit.

Lauber Energy Use Centre for 4 containers. The plant is abandoned due to conversion of the production. We replace our steam engine with a turbine, which is why most of the waste heat is eliminated. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) The system consists of: Intake hopper for air incl. dust filter Blower unit Heater 370kW Funnel for air flow incl. 4 shut ...

Power range: 200 - 320 kW Rated heat output: 320 kW Maximum permissible operating overpressure: 4 bar Maximum permissible operating temperature: 120°C Length: 3250 mm Width: 2500 mm Height: 2440 mm Diameter of exhaust pipe: 300 mm Fire room volume: 0.77 m3 Power of the combustion air blower: 0.4 kW Power of the rust drive: 0.12 kW Smoke fan power: 2.2 kW Fuels: residual wood (wood chips with and without bark, coarse and fine content max. 20%, main part 60-100%) Fuels according to 1.BlmSchV of 15 July 1988 Water content of the fuel: W20-W40 (dry to moist) Fuel size: G30,G50 (fine wood, medium chip) Feeding: Automatic (manually possible by filling door in emergency mode) The plant is offered with the following attachments: • Insertion unit with insertion screw, motor and attached rotary valve (measurement from boiler output: 1000mm (length) 700m (height with rotary ...

AT- Motor Caterpillar Typ= C13-LGK... mit 385 PS bei @2.100 RPM komplett einbaufertig mit Starter,Lichtmaschine Alter Motor MUSS Bruch-und Rissfrei sein Fotos können auf Anfrage gesendet werden. MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany MIW-Zeven.de E-Mail:info@miw-zeven.de Tel: 0049 (0) 4281-950583 Fax: 0049(0) 4281-950585

Engine power: 400V 3 KW 4 HP, 2 engines Formatschiebetisch: 1500mm Cutting height: 103 mm Blade: swivel, max. 315 mm Milling cutter: starr 90° Blower rpm: Rpm: 1500/3500/6000/8000 RPM. WJ-400100 K NET 2990,-new

Weibert W7-32 professional new 5 x combination machine It should already be a Waleed! new Formatschiebetisch Pro 2300mm planing width: 320 mm Engine power: 3 400V Motors 3 KW (S1) Dressing table length: 1500 mm Drum: 3-knife-shaft of turn of the Opening of 4-230mm Cutting height: 103 mm blade 315 mm Swivel 90 °-45 ° Milling cutter: starr 90° Blower rpm: 1400/3500/6000 and 8000 U/min SPECIAL PRICE for questions regarding the machine tel. 01717100222 or 06024-80707

1 KUSTERS 2-bowl rolling calender type 212.70-3200, 3200 mm Working Width (3400 mm face roller width), year 1993, top bowl chromed steel (thermal oil heated) diameter 450 mm, bottom bowl Racolan (S-roll) diameter 500 mm, Pressure 300 Newton/mm = 96 tons, maximum speed 100 m/min., maximum heating temperature 250 ºC, entry with metal detector, ELECTROTEX seam detector with automatic seam passage, exit by A-frame contact winder max. 1800 mm diameter, blower for cooling the bottom roller, water cooling system for edge of racolan sleeve, cooling rollers before exit, machine is controlled through SIEMES PLC, electronic speed control through MENTOR II digital drive, voltage 380V, 50 Hz, machine supplied with spare racolan sleeve and technical documentation

Stephan Emulsifier / micro-cut Type: MCH.D 180 year.: approx. 1993 capacity per hour: approx. 2500-up to 8500 kg (product dependant) funnel version With feeding screw on the motor shaft Cutting set diameter: 180 mm including new blade sets. Cutting head: level 1, Z 24 Cutting ring: level 1, gap of 0.2 mm to 3.0 mm. Cutting head on request: level 2, Z 24. Cutting ring: level 2, gap size on request from 0.2 mm to 3.0 mm. price of the machine: 32.900,00 with new blade sets; 24.900,00 without blade sets. Emulsifying, cutting without metal abrasion!

Offer Stephan micro-cut type: MCHD 180 year: approx. 2003 -Drive: 95 KW - 50 Hz - output per hour worked: approx. 2500-up to 8500 kg (product dependant) funnel version with screw on the motor shaft - cutting set diameter: 180 mm - including a new set of cutting (cutting heads: level 1, Z 24;) Level 2, no. 24) (cutting rings: 2 x MCH-D 180, gap size on request from 0.2 mm to 3.0 mm) price of the machine including a new blade set: 42.900,00. Price 34.900,00 the machine without a blade. Warranty: 3 months, excluding wear parts electro-no metal abrasion