rig drilling used for sale

CNC drilling machine Make: Alberti Type: Vector SH New machine This CNC drilling machine machines workpieces from above with 29 spindles and has 4 controlled axes. Optionally, the Vector is available as Modulo-SH with a total of two machining heads (top with 30 spindles and bottom with 7 spindles). Machining head, working from above Manual or automatic loading and stacking with longitudinal workpiece transport Monolithic frame in welded strong steel Independent control of all axes with drilling cycle optimisation 4 independent axes X Workpiece transport along the X axis with vacuum suction cup for automatic alignment Y Machining head W Lateral pressure control Z Machining depth control Remark: Max. Workpiece dimensions: 3000x1200x50mm Min. workpiece dimensions: 300x130x12mm Geometry of workpieces: Length > Width / Length = Width / Length < 20% Width Machi ...

Manufacturer: Koch , Type: SBD-B, Control: Siemens, Min.-max. working length in mm: 250-2500, Working width min-max mm: 10-150, Min.-max. workpiece thickness in mm: 10-60, Drilling support horizontal: 2, Drill gearings: 6, Drill gearings: 6, Drill support from top: 4, Drill gearings: 6, Drilling engine kW: ca.1,5, Working range max mm: 60, Dovel lenght mm: 10 X 30, Number of doveling tools: 4, Glue high-pressure pump: yes, Glue quantity setting: yes, Dowels horizontal: yes, FREE TEXT: mitMagazin und Rückführung der Werkstücke,

Manufacturer: Spotbohrmaschine, Function: Spot Bohrrung mit Seitlicher kabelbohrung ca.25 cm, Work piece width min-max mm: ca.540 mm, Milling spindles vertical: Bohspindel Forstner Bohrer,

Manufacturer: Biesse , Type: Skipper 100, Year: 2005, Online connection: möglich, Machining stations: 2, Work piece width min-max mm: 150-1000, Work piece length min-max mm: 250-3000, Work piece thickness min-max mm: 10-60, 3 axis control: yes, Vertical drilling station from below: 1, Vertical drilling station from above: 1, Double part drilling: yes, Milling spindles vertical: 2, Power kW 2: ca.4, RPM min-max 2: 1800-24000, Vertical drills-X: 13 von unten und oben, Drill vertical Y: 5 von unten und oben, Horizontal drills-X: 4, Drill horizontal Y: 2, Year :2005

Manufacturer: Koch Windoor, Type: BL-51-NC, Year: 1998, Control: Beckhoff, Work piece width min-max mm: 30-200, Milling spindles horizontal: 2, Feeding speed max m/min: ca.80, Drill vertical Y: 5, Horizontal drills-X: 9, Number of milling spindles: 4, FREE TEXT: Dübelwerkzeuge 3, Year :1998

Manufacturer: Biesse , Type: Skipper 100, Year: 2007, Control: CNI, Online connection: möglich, Machining stations: 2, Work piece width min-max mm: 150-1000, Work piece length min-max mm: 250-3000, Work piece thickness min-max mm: 10-60, 3 axis control: yes, Vertical drilling station from below: 1, Vertical drilling station from above: 1, Double part drilling: yes, Milling spindles vertical: 2, Power kW 2: ca.4, RPM min-max 2: 1800-24000, Vertical drills-X: 13 von unten und oben, Drill vertical Y: 5 von unten und oben, Horizontal drills-X: 4, Drill horizontal Y: 2, Year :2007

Manufacturer: Jago Lochreihenbohrmaschine, Type: B29PN, Year: 1992, Control: hand, Drilling engine kW: ca.1,5, Working range max mm: 60, Drilling support horizontal: 1, Drilling beams: 1, Drilling beam swivel-mounted: yes, Number of drill spindles: ca.27, Lochraster: 32, Swivel pneumatically 90-45°: hand, Foot switch: yes, Max. drilling depth in mm: 60, Year :1992

Manufacturer: Biesse, Year: 2014, Control: Biesse Works, Work piece width min-max mm: 100 - 1.000, Work piece length min-max mm: 90 - 2.500, Work piece thickness min-max mm: 8 - 60, 3 axis control: yes, Vertical drilling station from below: 1, Vertical drilling station from above: 1, Drilling heads overall: 2, Number of milling spindles: 2, Milling spindles horizontal: 1, Power kW 1: 3,5, RPM min-max 1: 7.000 - 15.000, Vertical drills-X: 2 x 13, Drill vertical Y: 2 x 5, Horizontal drills-X: 2 x 2, Year :2014

Manufacturer: Franke, Type: Beschlagbohrmaschine MInifix, Function: Beschlagbohren und Setzen, Work piece width min-max mm: 30-1200, Min.-max. workpiece length in mm: 150- ca.1700, Min.-max. workpiece height in mm: 10-40, Magazin for hinges!: Minifix, Set buffer: no, Working range X: 1700, Working range Z: 25, Drill gearings: 2, Drilling supprt from bottom: 2, Drill gearings: 2, Drill gearings: 2, Number of spindles: 2 + 2, Tool exchange places: yes, FREE TEXT: für leichtes rüsten Anschlag Arretirung all 16 mm,

Manufacturer: Biesse, Type: Skipper V31, Year: 2016, Software: Biesse Works, Work piece width min-max mm: 70-900, Work piece length min-max mm: 200-2500 (3200), Work piece thickness min-max mm: 10-70, Working range X: 2500, Working range Y-axis: 900, Number of milling spindles: 1, Power kW 1: 4,5, RPM min-max 1: 18.000, Vertical drills-X: 5, Drill vertical Y: 5, Horizontal drills-X: 4, Drill horizontal Y: 2, Sawing unit: yes, Number of drill spindles: 10+6, Lochraster: 32, Drilling engine kW: 10, Year :2016

Manufacturer: Biesse , Type: Insider FT 2, Year: 2001, Control: Biesse NC 100, Software: Biesseworks, Maschinensteuerung: CNI, Online connection: möglich, Machining stations: 2, Working range X: 3500, Working range Y-axis: 1300, Working range Z: 60, Vertical drilling station from above: 2, Automatic setting up: yes, Drilling supprt from bottom: 4, Milling spindles vertical: 2, Power kW 2: ca.5,5, RPM min-max 2: 24000, Horizontal drills-X: 24, Drill horizontal Y: 8, Continuous flow system: yes, Lochraster: 32, Working range max mm: 60, Machining stations: 2, Year :2001

Manufacturer: Weeke, Type: BHX 500, Year: 2007, Work piece width min-max mm: 70 - 1.000, Work piece length min-max mm: 200 - 2.500, Work piece thickness min-max mm: 4 - 80, Working range X: 2.500, Working range Y-axis: 1.000, Working range Z: 80, Vertical drilling station from below: 32, Vertical drilling station from above: 32, Drilling supports horizontal: 2, Horizontal drills-X: 2 x 8, Drill horizontal Y: 2 x 2, Number of spindles: 1.500 - 7.500, Number of spindles: 1.500 - 7.500, Year :2007

Manufacturer: Koch Windoor, Type: BL-51-NC, Year: 1997, Control: Beckhoff, Work piece width min-max mm: 30-200, Min.-max. workpiece length in mm: 100-5000, Min.-max. workpiece height in mm: 10-90, Milling spindles horizontal: 2, Milling spindles vertical: 2, Feeding speed max m/min: ca.80, Drill vertical Y: 5, Horizontal drills-X: 9, Drill gearings: 3, Drill gearings: 3, Drill gearings: 3, Number of milling spindles: 4, FREE TEXT: Dübelwerkzeuge 3, Year :1997

Manufacturer: Hettich, Type: Blue Max mini, Control: hand, Bänderbohrstationen: yes, Number of spindles: 3, Milling engine 1 hours power: 0,5, Number of tables: 1,

Manufacturer: Priess und Horstmann, Type: BAT-III-CNC, Year: 1996, Control: B&R + PC, Online connection: möglich, Machining stations: 2, Work piece width min-max mm: 190-600, Work piece length min-max mm: 100-1350, Work piece thickness min-max mm: 16-35, 3 Achsensteuerung: 3, Vertikale Bohrstationen von unten: 2, Bandbohrung: yes, Pufferbohren und setzen: yes, Grifflöcher: yes, Sonderbohrung Fläche: yes, Automatic setting up: yes, Drilling supprt from bottom: 2, Drilling supports horizontal: 1, Drilling heads overall: 3, Beschlagstation: yes, Year :1996

Manufacturer: Hoffmann, Type: DEA, Year: ca.2000, Dovel lenght mm: 8 X 30, Number of doveling tools: 1, Glue high-pressure pump: Niederdruckbehälter, Glue quantity setting: yes, Dübeln horizontal: yes, Beleimwerkzeuge: 1, Dovel insertion: yes, Dübelgrösse mm: 8 X 30, FREE TEXT: Maschine wird gereingt und geprüft vor Auslieferung, Year :ca.2000

Manufacturer: Eigenbau, Control: hand, Work piece width min-max mm: 480, Min.-max. workpiece height in mm: 10-80, Milling spindles vertical: yes, Milling engine 1 hours power: 0,75, FREE TEXT: Bohrgerät für Halogen Bohrungen die Kabelzuführung muss mit einer separaten Bohrmaschine von vorne gebohrt werden, über die angeflanschte Bohrbrille. ,

Manufacturer: Koch Contuorfräsmaschine, Type: Sprint PTP 2 1800, Year: 2012, Control: Beckhoff, Program: Koch-Wop, Online connection: möglich, Machining stations: 2, 4 Achsensteuerung: yes, Work piece width min-max mm: 120-1360, Work piece length min-max mm: 120-1360, Work piece thickness min-max mm: 19-25, Number of milling spindles: 1, Milling spindles horizontal: 1, Tastend Aggregat: 1, Power kW 1: ca.0,75, RPM min-max 1: 18000, FREE TEXT: zusätzliche Festplatte/Windows XP, Year :2012

Manufacturer: Gannomat, Type: Super Drill, Control: hand, Drilling engine kW: 2,2, Working range max mm: 120, Drilling beam swivel-mounted: yes, Lochraster: 32, Spindelanzahl 1: 19, Swivel pneumatically 90-45°: yes, Work piece support: yes, Work stations: 1, Foot switch: yes, Max. drilling depth in mm: 80, Max. drilling height in mm: 80,

Manufacturer: MAW, Year: ca.1990, One or two Spot machine: 1, Hinges inserting unit: yes, Magazin for hinges!: yes, Working range X: 1500, Working range Y-axis: 300, Number of units: 2, Clamping system: pneumatik, Wight approx. kg: 500, FREE TEXT: Hettich System, Year :ca.1990

Manufacturer: Koch, Type: Compact, Year: 1991, Control: Programm, Working widht max mm: 150-2500, Arbeitstiefe max mm: 200, Working thickness max mm: 80, Schwenkbereich Grad in X: +30-90, Dovel units: 3, Dovel diameter mm: 10-12, Drill gearings: 2, Drill gearings: 2, Drill gearings: 2, Drill spindles per support: 5, Gluing: yes, Dovel insertion: yes, Raster 32 mm: yes, Compressed air bar: 6, Wight approx. kg: 3000, Year :1991

Manufacturer: Stegherr, Type: FDE, Year: 1993, Control: Verdübelung von Kämpfer-Setz- hölzern, Sprossen und Türelementen., Program: PC Steuerung, Work piece width min-max mm: 20-150, Min.-max. workpiece length in mm: 400-3300, Min.-max. workpiece height in mm: 10-80, One or two Spot machine: 2, Year :1993

bore capacity in steel (diameter): 40 mm throat: mm bore stroke: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralCNC Turning Centre; Control: Control M730UM with CELOS CharacteristicsMax machining diameter406 mmDimensions (L x W x H)3,35 x 2,11 x 2,2 (3,99 x 2,11 x 2,2) mDrive power main spindle22/18,5 kWRapid feed X / Z30/30 m/minMovements X / Z260/795 mmRotary tool spindle speed10000 rpmNumber of tool stations12 Speed max.2500 rpmBar diameter max.102 mmSpindle bore111 mmMax. Turning Length705 mmWeight approx.6400 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pLeft Spindle through-spindle hole dia. 111 mm (spindle speed 2,500 min-1, 22/ 18.5 kW)(Left Spindle) Through-Spindle Hole Dia. 111 mm (4.37-inch) (Spindle Speed 2,500 min-1, 22/18.5 kW) The NLX 2500 adopts a h ...

General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Speed max.6000 rpmNumber of driven tools12 Power max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...

General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...

General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Main drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWorking areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...

General2-axis universal turning machine with - partiall hollow clamping device (hydr.) inner draw tube Ø 52 mm - C-axis and spindle brake (hydr.) - 12 stations circle revolver Sauter reception acc. VDI 30, DIN 69880-30 with tool drive Connection/drive acc. DIN 5480 Direct measuring system, glas scale in X-axis - tailstock; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTransverse stroke210 mmLongitudinal stroke525 mmClamping chuck diameter max.210 mmMain drive 1Drive power (100% DC)13 kWSpeed range20 - 6000 rpmTorque (100% DC)171 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)192 NmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose140h5 mmSpindle bore73 mmSpindle diametre on front bearing100 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools12 Speed max.-500 ...

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways710 mmClamping chuck diameter max.315 mmLongitudinal stroke1345 mmTransverse stroke260 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightWeight approx.7800 KgDimensions (L x W x H)5,4 x 2,07 x 2,6 mPlug-in board with 2x4 free in-/outputsInputs / outputs programmable via M-functions, consisting of: 8 inputs 4 outputs, 2 amperes 4 outputs, potential-freeExcentric turning and milling operationExcentric turning and milling operation (only with Sie ...

bore capacity in steel (diameter): 50 mm throat: 350 mm bore stroke: 180 mm thread capacity: 35 M spindle taper MT: 4 MK column diameter: 150 mm bore spindle turning speed range: 132-1852 U/min table-size: 480x480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35 mm throat: 300 mm bore stroke: 150 mm thread capacity: 27 M spindle taper MT: 4 MK column diameter: 125 mm bore spindle turning speed range: 100-2000 U/min table-size: 420x400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 300 mm bore stroke: 160 mm thread capacity: 30 M spindle taper MT: 4 MK column diameter: 125 mm bore spindle turning speed range: 75-2100 U/min table-size: 480x480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lg.Nr. 25072 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 150 mm - Drilling spindle speeds infinitely variable rpm - Projection 350 mm - Max. distance from drilling spindle to table 580 mm - Table with 2 T-slots 600 x 450 mm - Height adjustable via rack with hand crank - Table left + right tiltable - Drive 400 V / 3 kW - Space requirement approx. W 700 x H 1950 x D 950 mm - Weight approx. 650 kg -with: - Machine vise - Keyless chuck 1-13 mm -Lighting

Drilling / Jig Boring Machine CONSTANT SUPEMEC type P65 Travel X: 500 mm Travel Y: 300 mm Travel Z: 550 mm Cone: SA40 Spindle speed: from 77 to 1520 RPM Table size: Length 1200 mm x Width 420 mm Maxi distance spindle nose/table: 670 mm Mini distance spindle nose/table: 120 mm Throat depth: 300 mm Variable speed drive for X - Y Voltage: 380 V Width: 1600 mm Depth: 1800 mm Height: 2400 mm Total width with control panel: 2700 mm Weight: 3 T

ID3518 Bomag B200 on Iveco truck - Well drill / well drill year/Baujahr 1985 approx. 35,000 km Bomag B200 drilling rig (built in 1985), mounted on an Iveco truck (all-wheel drive), with a 100 mm rotary head and a 120 m cable, drilling depths of up to 245 m (250-300 mm diameter), 2 Caprari pumps (type MEC-100), with approximately 90 m of drill rods (114 mm diameter) Bomag B200 (built in 1985), on truck Iveco (all-wheel drive), rotary head 100 mm passage, rope head 120 m rope, drilled to 245 m depth - 250-300 mm diameter, 2 Caprari pumps (type MEC-100), with approx. 90 m drill pipe (114 mm diameter)

core drilling diameter max.: 32 mm bore depth: 1150 mm swing diameter: mm weight of the machine ca.: 12 t total power requirement: kW dimensions of the machine ca.: m Heidenhain iTNC530 cnc control 12-fold tool changer Technische Daten / technical details: Wege: / travels: X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm B-Achse (Rundtisch) / B-axis (rotary table) 360 ° A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Gewicht der Maschi ...

Offer 25094 Specifications: - Drilling capacity in steel ST 60 50 mm - Drilling capacity in steel ST 60 60 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 225 mm - Drilling spindle speeds infinitely adjustable 35 – 950 rpm - Right - Counterclockwise rotation - 3 feeds 0.1; 0,16; 0.25 mm/rev - Projection 360 mm - Max. distance from drill spindle to table / base plate 740 / 1220 mm - Table with 2 T-slots 700 x 590 mm Height adjustable via rack with hand crank - Drive 400 V / 2.2 / 4.0 kW - Space requirement approx. W 700 x H 2150 x D 1150 mm - Weight approx. 850 kg - with: - Emergency stop button -Lighting - Coolant device

Specifications: - Drilling capacity in wood 40 mm - Drilling capacity in steel 18 mm - Drilling spindle holder MK 2 - Quill stroke 120 mm - Drilling spindle speeds infinitely variable in steps - 60 - 2840 rpm - Max. distance table – drilling spindle 600 mm - Boom / unit tiltable left + right 45° each - Boom / unit swivel left + right - Table size 450 x 450 mm - Drive 400 V / 0.33 / 0.55 kW - Space requirement approx. W 500 x H 1870 x D 1200 mm - Weight approx. 150 kg

Key data: 13 mm

Made in Germany Drill chuck: B 16 Speed: 480 - 4,000 rpm

bore capacity in steel (diameter): 35 mm throat: 320 mm bore stroke: 150 mm spindle taper MT: 4 table-size: 500 x 400 mm spindle turning speed range: 75 - 3.010 U/min feed range - boring: 0,1 / 0,15 / 0,22 / 0,33 mm/U quill stroke: 150 mm voltage: 400 V total power requirement: 1,8 kW weight of the machine ca.: 275 kg dimensions of the machine ca.: 0,70 x 1,00 x 1,95 m threading device: - Serial-No.: 138050673 - Electromagnetic feed - Threading device - Machine vice 150 mm - Two clamping screws 14 mm - 9-piece drill cartridge 14.5 mm - 30 mm, MK 2 / MK 3 - Cutting oil spray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 245 mm bore stroke: 135 mm spindle taper MT: 3 table-size: 410 x 380 mm spindle turning speed range: 10 - 2100 U/min voltage: 400 V total power requirement: 1,1 kW weight of the machine ca.: 210 kg dimensions of the machine ca.: 0,7 x 1,8 x 1,75 m threading device: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Oscillating Drilling Machine COMEC MM0 10 3L Number of horizontal spindles per page 4 Drilling distance between centers during chiselling: min/max: 45/760mm Drilling distance between centers during straight drilling: min/max 45/850mm Hole length 0-100mmm Spindle speed 4500/9000 rpm 3 independently adjustable oscillations Oscillation motor 1.5kw Total power 7kw Pneumatic material clamps Maximum workpiece dimensions 1000x 100x 100mm Capacity 600pcs/h (300+300) CE Certified Year of production 2005 Machine dimensions: 1450x1650x1350cmH Weight about 1000kg

Paper drill Dürselen Corta PB 04 N; very good condition; cleaned and tested; 4 drill heads (one of them unused); Drilling lubrication and cooling; Speed regulation; speed table stroke adjustable; Max. Stacking height 50mm; insertion depth behind drill 42mm; Sliding table; Hole spacing 31.7-293mm; Endless Drilling Belt; optionally with Filofax 7-fold drill head. Paper driller Dürselen Corta PB 04 N; good condition; cleaned and checked; 4 heads (one of them never used); lubrication and cooling system; adjustable drilling speed; adjustable table hub speed; max.pile hight 50mm; depht

Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG

A Trima CNC gantry machining center is available. Workpiece dimensions X/Y/Z: 2500mm/1100mm/80mm, spindle power: 7.5kW, speed: 24000rpm, tool positions: 10, traversing speed X/Y/Z: 55m/35m/15m/min. Machine dimensions X/Y: approx. 4400mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The machine has a control defect. The reference run is aborted. Documentation available. On-site inspection is possible.

: 40 1008 rated current: 20 A voltage: 24 V weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

voltage: 50 V frequency: 50 Hz ampere: 3,7 A : 21882 speeds:: 3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Motor output: - kW Dimensions (L/W/H): - mm Vertikal stroke: - mm Table dimensions: - mm Dust suction hood: - mm Diameter of the saw arbor: - mm Length of the rolling table: - mm Sawblade tiltable: - ° milling stroke vertical: - mm total power requirement: - kw Weight: - kg Spindle diameter: - mm Length of the planing table: - mm Number of heads vertical: St. Number of heads horizontal: St. Number of milling agregates: St. Number of knives: St. Number of sanding units: st. Number of spindles: St. Number of spindle head vertical: St. Number of spindles head horizontal: St. Number of milling spindles: St. 0: St. Number of tools: St. Working width: mm Year: 0 Speed of boring spindles: U/min. Required air-pressure: bar Dowel insertingunits: St. Electrical height adjustment: 0 Working height: mm Workpiece length min.: mm Air consumption: m³/h Positions adjustment of boring unit: mm Position ...

bore capacity in steel (diameter): 60 mm throat: 400 mm bore stroke: mm total power requirement: 4,4 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm arm length: 1000 mm workpiece height max.: 1400 mm total power requirement: 6 kW weight of the machine ca.: 3.700 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.