136,837 used machines on RESALE, but how to find them? Machine Search
Complete powerful planing mill with WACO 6 shaft planing machine, double cut-off band saw Möhringer, complete mechanization, moisture measurement, control, etc. etc. Output approx. 2,500 m3/month and shift. Depending on the dimension Facility consists of: Tilt destacking, single piece allocation, Brookhuis moisture measurement, Braun Canali double band saw, small coil bundling with Böhl small coil formation and feeding to stacking machine, 2 x stacking machines with battening, complete packaging line with film dispenser, package press with lower squared timber insertion. The complete Siemens control system, the entire steel substructure, all cabling, pipes, etc. Very well maintained plant for the production of slats, spring groove, 2 by dimension lumber etc.
turning diameter: 220 mm turning length: 200 mm control: Siemens Sinumerik total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Flat disc ø 430 mm - Lighting system - Coolant sealing Specification - Tip width: 2000 mm - Circulating Ø over bed: 600 mm - Circulation Ø over slide: 360 mm - Circulating Ø in eruption: 730 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/U (66 steps) - Transverse feed: 0.036 - 2.019 mm/U (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock ...
Professional vacuum machine Webomatic C 50-W is designed for vacuum packaging and hermetic sealing of food products in butcher shops, restaurants, processing plants, supermarkets and professional kitchens. This model is an ideal solution for users who require high working capacity, reliable performance and extended product shelf life in daily professional use. The vacuum system removes air from the packaging, preserving freshness, quality, aroma and product structure. The machine is suitable for packaging meat, cured meat products, cheese, fish, ready meals and many other food items. Model C 50-W is equipped with a powerful Busch vacuum pump with 100 m3/h capacity, ensuring fast and efficient operation even with larger packaging volumes. The chamber size of 700 x 460 mm provides enough space for different product types and package sizes. Sealing bars sized 1 x 450 mm and 1 x 695 mm al ...
Model: Vision FD Vario 3D YOM: 2011 Availability: In Stock ID Number: SMS00364 S/N: 90643 Tube Type: GF-181-06-125-65 Tube Housing: Vision Pluse 3-110 Tube YOM: 2011 (Original tube) Condition: Complete and fully functional
new accuhead, brand Kingswerk (similar to Kautex). Immediately available from stock
Professional vacuum machine Webomatic C 50-W is designed for vacuum packaging and hermetic sealing of food products in butcher shops, restaurants, processing plants, supermarkets and professional kitchens. This model is an ideal solution for users who require high working capacity, reliable performance and extended product shelf life in daily professional use. The vacuum system removes air from the packaging, preserving freshness, quality, aroma and product structure. The machine is suitable for packaging meat, cured meat products, cheese, fish, ready meals and many other food items. Model C 50-W is equipped with a powerful Busch vacuum pump with 100 m3/h capacity, ensuring fast and efficient operation even with larger packaging volumes. The chamber size of 700 x 460 mm provides enough space for different product types and package sizes. Sealing bars sized 1 x 450 mm and 1 x 695 mm al ...
Mazak Quick Turn Smart 250M L Turning-Milling Center CNC Model Hersteller [manufacturer]: Mazak Germany Type [ type]: Quick Turn Smart 250M L Control unit: Mazatrol smart Incl. handwheel Baujahr[construction year]: 10/2016 Weight [weight]: 6500kg Approx. (L x D x H): 3.4m x 2.0m x 2.0m Full documentation is available. Various accessories after consultation. Top Zustand / condition From first hand, from Germany. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - upon receipt of invoice Prior sale, errors excepted. We ask for your order. Other machines and systems available from stock – please inquire. We look forward to seeing you.
Specifications: Planing width: 245 mm Planing depth: 0 - 4 mm Nominal stroke rate: idle 8500 1/min Cutting speed: 32.9 m/s Rated power consumption: 2300 W Weight: 13.2 kg Knife head diameter: 74 mm Universal motor: 230 V / 50 Hz
various blow molds available from stock. More information on request
This ingredient handling system is a modernized weighing and dosing unit designed for precise gravimetric processing of bulk materials. The installation has been upgraded to include an advanced weighing function, ensuring accurate batching and efficient material handling. Manufactured by Zeppelin Systems, the system combines robust mechanical construction with reliable pneumatic conveying technology, making it suitable for continuous industrial operation. Key Features Gravimetric weighing system for precise dosing (up to 25 kg per batch) Pneumatic conveying via pressure vessels Two weighing hoppers with integrated discharge systems Compact modular frame design Combination of mechanical, electrical, and pneumatic components Suitable for powders, granulates, and bulk solids Technical Specifications General Data Manufacturer: Zeppelin Systems Year of main installation: 09/ ...
Compact machine system for the production of stamped and bent parts made of strip and wire. Tool quick clamping system User-friendly machine and process control P CNC 4E Compatibility with RM 35, RM40 and RM4 tools Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines
Schroeder & Bauer WB 32-1 Universal wire and belt bending machine Wire feed Plain text display Press force monitoring Wire straightener Bosch stripping devices Bracket and brush motor with mounted tool W32/1-32 Soundproof cabin Fäßer CU wire with stamped parts Switchboard Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines
The machine is in good technical condition, after prior agreement it is possible to test it. Tools A, B, C, D Number of stations in the turret 6 (size D) Number of rotary stations 3 Max. number of tools 60 of which rotary - continuously 360 30 Maximum punch diameter (size D) – single 81 mm Maximum punch diameter in magazine XMTE4M 4 x 31.7 mm Maximum punch diameter in magazine XMTE6M 6 x 24.0 mm Maximum punch diameter in magazine XMTE10M 2 x 24, 8 x 12.7 mm Working range in Y axis (with Multitool) 1300 mm Working range in Y axis (single tool) 1250 mm Working range in X axis (with Multitool) 2550 mm Numerically controlled stroke depth 0.1 – 31 mm Automatic clamp repositioning in X axis up to 10,000 mm Max. positioning speed in Y+X axis 80 m/min. Axis acceleration 10 m/sec Number of strokes – (step 1.0mm) 1000/min USB port 6 Weight 7800 kg Max. jaw opening 11 mm Max. stroke 31 mm Pow ...
Schroeder & Bauer WB 32-1 Universal wire and belt bending machine Wire feed Plain text display Press force monitoring Wire straightener Bosch stripping devices Bracket and brush motor with mounted tool W32/1-32 Soundproof cabin Fäßerb CU wire with stamped parts Switchboard Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines
The machine is in good technical condition, after prior agreement it is possible to test it. with the Siemens Shopturn system, including the feeder, the machine is fully equipped. BASIC PARAMETERS Working space max. turning Ø: ≈ 410–500 mm max. length: 800 mm distance between spindles: approx. 1020 mm swing diameter above the bed: ~700 mm realistic: ideal for shafts, flanges, bodies up to ~800 mm Travels (axes) X: ~480 mm Y: 100 mm Z: ~800–845 mm B axis: 110 (5-axis machining) C axis: 360 (indexing + interpolation) this makes it a full-fledged turn-mill (not a classic lathe) Spindles main spindle speed: ~5000 rpm power: ~25–34 kW passage: approx. 76–87 mm counter spindle speed: ~6000 rpm milling spindle (main difference compared to a classic lathe) speed: up to 12,000 – 20,000 rpm power: ~19–22 kW taper: HSK-A63 or Capto C6 allows: milling drilling tapping 5-axis simultane ...
Combination laser punching FINN POWER LB6 Year 2003 3000x1500
Friedrich Deckel FP 2 LB tool milling machine This universal milling machine FP 2 LB from the well-known German manufacturer Friedrich Deckel in Munich has as a special feature an extremely stable basic body and is designed as a travel column machine i.e. the machine does not lose accuracy should heavy parts (up to 1000 kg) be clamped. Another special feature is the so-called inclined bed of 45 degrees. Thus, after dismantling the universal table, it is possible, especially V-engine blocks with 90-degree cylinder angle (e.B. amerik. V8) directly clamp and process. The long travel distance of 800mm is also an advantage in this case. Lid FP 2 LB universal swivel/tilt table (± 45° / ± 15°) Lid Universal Divider Vice 160 mm Working range: X= 800 mm / Y= 300 mm / Z= 400 mm From 01.07.21 the machines are ready for collection. Dismantling and transport by the buyer. ...
Head type: 3-SH/60-125-PE/T (DeCo) Marke/ Brand: UES Condition: New/ New Layers : 2 Center distance: 125 mm Nozzle/ Die: 60 mm Hoses/ Parisons: 3 Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No
machine measurements: 850 x 1.800 x 1.450 mm machine weight: 360 kg power capacity: 0,7 kW Condition: new Specification: Powder coating machine, type: EPC-30/2E The machine is designed for the powder coating of cables, hoses and profiles. - Product diameter max.: 30 mm - Product speed max.: 1,500 m/min - Powder throughput min.: 30 g/min with fine dosage - Powder throughput max.: 400 g/min per powder injector - Electrostatic: available as option - Connected load: 0.7 kW - Dimensions LxHxW: 850 x 1,800 x 1,450 mm - Weight approx.: 360 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition, after prior agreement it is possible to test it. Maximum size of the machined part mm 1330 x 900 x 595 Max. weight of the machined part kg 5000 Axis travel X/Y/Z/U/V mm 800 / 600 / 400 / 150 / 150 Diameter of the wire used mm 0.15-03 Continuously controlled 4 axes X, Y, U, V Drive system using AC servo drives Max. cut cone 22.5 / 100 mm Accuracy class of ball screws rpm C1 - highest Filtration system capacity l Main tank 1630l, secondary tank (Z=600) 1280 l Max. cutting speed mm/min 250 Dielectric conductivity measurement Auto – 5 ~ 200 kW-cm Dielectric temperature measurement Auto with accuracy 1C Power input kVA 15 Machine footprint mm 4350 x 3600 Height mm 2740 Machine weight approx. kg 8500 • Windows CE control system (described above) • vertical leveling device • paper filter 2 pcs • deionization resin - 1st fill • deionizati ...
cross-section width:: 100 mm cross-section heigth:: 40 mm feed:: 2 - 999.999,9 mm Condition: new, Specification: Impact knife cutting machine CC-600/40 for hoses and profiles - contact length: 600 mm - product diameter: 40 mm - belt width: 100 mm - Tractive force: 400 N to 800 N - Drive: 2 drives upper and lower belt - Conveyor belt speed: 100 m/min - Drive feed, cutting motor: Servo drives - Cutting capacity with blade max.: 4,000 1/min - Connected load: 3.5 kW - Dimensions L/H/B: 1,900 x 1,650 x 960 mm - Weight approx.: 580 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Head type: BKZ-40 (A 60) Marke/ Brand: Bekum Overhauled: Yes/ Yes Layers : 1 Nozzle/ Die: 40 mm Hoses/ Parisons: 1 Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No
SAHINLER HKM 115 hydraulic ironworker machine was built in Turkey by Şahinler Metal Makina Endüstri A.Ş. It is an extremely versatile machine designed for complex machining of structural steel (S235 / S355). It is capable of performing processes such as precise hole and corner punching, as well as shearing flat bars, angle bars and bars. All these operations are performed at 5 individual workstations. Each station is controlled by two hydraulic cylinders and separate foot switch controllers. The use of this solution enables independent or parallel operation of the machine by two operators at two stations simultaneously. The stroke of each cylinder is adjustable in order to increase productivity. All of this makes the offered HKM 115 ironworker machine the perfect solution for increasing production efficiency in production facilities and locksmith workshops. The total weight of the mac ...
Head type: 2-BKD-51-125 (A 70) Marke/ Brand: Bekum Overhauled: Yes/ Yes Layers : 1 Center-distance: 125 mm Nozzle/ Die: 51 mm Hoses/ Parisons: 2 Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No
2-dispensing edges labeler type Pagomat 6/2 L-100 Non-Stop with Videojet. label width: 100mm.
MUBEA PROFI 500 hydraulic ironworker machine was built in Germany by Muhr und Bender Maschinenbau GmbH (Mubea). The machine, designed for complex machining of steel workpieces, is equipped with 4 individual workstations. They are capable of performing such processes as precise hole punching, as well as shearing flat bars, angle bars and bars. Each station is hydraulically controlled. The extremely robust design of the machine additionally ensures maximum process stability during even the most intensive challenges. All of this makes the offered Muhr & Bender PROFI 500 ironworker machine the perfect choice for increasing production efficiency in industrial facilities and locksmith workshops. Technical specifications of the MUBEA PROFI 500 ironworker machine General data - maximum press force: 50 t (500 kN) - number of workstations on the Muhr und Bender PROFI 500 machine: 4 Flat b ...
PEDDINGHAUS Hydraulic 800 hydraulic punching machine was manufactured in Germany by Paul Ferdinand Peddinghaus GmbH. This highly reliable machine is used for the precision machining of angle bars and flat bars. It enables the punching of square and round holes in structural steel workpieces with a maximum thickness of 25 mm. The machining process is performed with a high press force of up to 80 tonnes by means of punches. The perfectly balanced design of the machine maintains excellent stability even during the most intensive challenges. All of this makes the PEDDINGHAUS Hydraulic 800 an excellent addition to industrial facilities and locksmith workshops. The total weight of the machine is approximately 1500 kg. Technical specifications of the PEDDINGHAUS Hydraulic 800 punching machine General data - maximum press force: 80 t (800 kN) - throat depth: approx. 200 mm - working heigh ...
SPECIFICATIONS: Grinding/calibration line Editing: from above and below 2 motors with 18.5 KW each Cardan drive Sanding belt dimensions mm: 2,620 x 1,180 Vacuum carpet
Code: 0383 Brand: DUE B.ERRE STEMA - ITALY Model: SPINAMATIC GLF HP - CE Standard Machine for applying thick glue and dowels with pneumatic gun for panels, for doors, windows and various - CE Standard Technical data Max insertion capacity 60 dowels per minute Dowel diameter mm 10/12 mm Dowel length mm 25 to 50 mm Max insertion depth 30 mm Machine works with one diameter of dowels at a time Electronic dosing of glue quantity Washing system Flexible arm provided with counterweight that makes the gun lighter during the work cycle (gun weight approx 3 kg) Recommended adhesive type: Water-based emulsion adhesive - Viscosity Brookfield 580 mPa.s - Solids content 30% - Min film formation temperature 3–5 °C - Cleaning with water Wheels on base Voltage 220 V single-phase Max pressure 6 atm Overall dimensions mm 600 x 1000 x 2100 h Weight kg 130
We ask for self-dismantling. Machinery List: 1 x rack oven with oil burner Heuft type. nonplusultra Bj. 2009 with fireplace 1 x rack oven with oil burner Heuft type. nonplusultra Bj. 2009 with fireplace 1 x rack oven with oil burner Heuft type. nonplusultra Bj. 2009 with fireplace 1 x rack oven with oil burner Heuft type. nonplusultra Bj. 2009 with fireplace 1 x rack oven with oil burner Heuft type. nonplusultra Bj. 2009 with fireplace 1 x rack oven with oil burner Heuft type. nonplusultra Bj. 2009 with fireplace including oil feed pump for all 6 furnaces 1 x basket washing system built in 2009 1 x Apricot and glaze line Dojatec 2009 1 x Proofer for 10 rack trolleys trays 60x 40 Koma BJ. 2009 including chiller 1 x Proofer for 10 rack trolleys trays 60x 40 Koma BJ. 2009 1 x Proofer for 10 rack trolleys trays 60x 40 Koma BJ. 2009 1x large Carrier freezer 50 pallet ...
Manufacturer Producer Saacke Typ type UW2 CNC Year of construction Construction year 1989 Steuerung control Sinumerik Machine size machine size 3500x3000x2500 mm Spannung Voltage 400 V Machine weight machine weight approx. 2.5 t
Working widths: Eingangsbreite 400 mm Clouth speed: 20 m/min Fabric content: 50 m air pressure - required: 6 bar voltage: 380 V / 50 Hz Crushing-machine for getting crush-effects in warp-direction. The cloth is feeded into a funnel by a setting unit. The pneumatical controlled plunger puts the fabrics into the guide tube vertically and horizontally. The fabrics will be pushed into the hose which is slipped over the guide tube and then pressed. Afterwards the closed hose will be treated by saturated steam. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
DYNAJET 350th HELI The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, the Overall machine safety and noise reduction - Impact-resistant lockable hoods made of glass fiber reinforc ...
Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush -Manufacturer: wrt, deburring machine with base -Drive: 3.0 kW / 2800 rpm -Brush: Ø 250 mm -Shaft: Ø 80 x 110 mm -Dimensions: 660/430/H1200 mm -Weight: 101 kg
M. No.: 560037 // Com.No.: 451.4013 // No. 2620 Colours: 6 // Performance: up to 36’000 cups per hour Equipment / Additional information: Consists off: • Stacker • Printing machine • Cup feeding • Stapler Max. cup rim diameter: 130 mm Min. cup rim diameter: 55 mm Production speed each according to cup size, quality and Raw materials with UV drying: up to 24,000 cups per hour (without positioning) With positioning 12'000/h - 15'000/h depending on cup, format and flap. El connection value with drying: approx. 26 kVA Electrical connection: 3 x 400 V, 50 Hz Air connection / consumption: 6 bar / approx. 50 m3/h Weight: approx. 7,800 kg This machine doesn’t have cup positioning.
Langguth E 78-210-FVT-18 Labeller System for labelling lids Very good condition, directly from production!
Key data: 406 mm, 584 mm
Inv. Num. : 9153 Type: DS-30SSY Producer: HAAS Created: 2015 Parameters: Hours: 3002 h Maximum turning length: 584.2 mm Maximum turning diameter: 406.4 mm Maximum turning diameter over bed: 807.7 mm X-axis travel: 317.5 mm Y-axis travel: 50.6 mm Travel Z-axis: 584 mm Maximum main spindle power: 14 kVA Maximum spindle speed: 4800 1/min Number of all tools: 24 pieces Spindle bore: 88.9 mm Weight: 7259 kg Equipment: Chip conveyor Pick-up spindle C-axis Bar Feeder Tool Alignment System System for removing parts after cutting Driven Axial Holder ER32 (Heimatec) Driven radial bracket ER32 (Heimatec) Holders for rotary tools, other holders and jaws
Burton 11 A knotting machine; good condition; cleaned and tested; engine overhauled; new frequency converter; with accessories. Knot machine Burton 11 A; good condition; clenaed and checked; motor rebuilt; new frequency converter; with accessories.
Rapid radial / Rapid radial / Snel radial DANUBE DR 13
Metal Circular Saw Cold Circular Saw Manufacturer Kasto Type GKS400P YOC 1998 Saw blade 400mm coming from below automatic hydraulic vice for material expansion Top condition, ready for immediate use.
Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Table dimensions: 700 x 405 mm -Travel paths: Z 330 mm/Y 410 mm/X 630 mm -Quick stroke: 155 mm -Recording: MK4 -Speeds: 31 - 1500 rpm -Dimensions: 1570/1800/H2600 mm -Weight: 2600 kg
Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Manufacturer: Fronius, remote control RCU5000i Univ.SD -Art.No.: 4,046,098 -Voltage: U1 24 V -Dimensions: 180/260/H50 mm -Weight: 1.5 kg
maximum number of results exceeded
please refine your search
