137,650 used machines on RESALE, but how to find them? Machine Search
bushing cut-off , PKO diameter range 3-8,5 mm number of dies 2 number of stations 4 cutting length 55 mm shaft length under head 55 mm output - pieces/min 200 press power 30 to
control: GE Fanuc Series 21i-T Distance between centres: 5000 mm center bore: 425 swing over bed: 850 mm bed width: 425 mm rapid feed: 10000 mm/min working feed: 7000 mm/min main spindle bore: 85 mm Main spindle: DIN 55027-n°8 taper: 5 spindle speeds: 0-2000 U/min Spindle power: 11 KW tailstock quill diameter: 96 mm tailstock travel: 215 mm weight of the machine ca.: 7 t dimensions of the machine ca.: 7.300x1.700x1.900 m Support Guides 2 Swing over cross carriage 560 mm. Automatic ranges 2 Turret type Automatic Turret positions 8 Hydraulic tailstock quill stroke INCLUDED Tailstock taper MORSE 6 3 Jaw Auto-centering hydraulic chuck Ø 300 mm. INCLUDED 4 support steady rest Ø 450 mm. INCLUDED 3 support steady rest Ø 250 mm INCLUDED Chuck protection INCLUDED Complete rear protection INCLUDED Dual handwheel for carriage control INCLUDED Foot pedals for hydraulic chuck operati ...
100% working Great condition
Manufacturer PINACHO Model RHINO SK – 425 Year 2005 CNC GE Fanuc Series 21i-T Capabilities and advances Distance between points 5,000 mm. Stitch height 425 mm. Support Guides 2 Maximum allowable turning on a bed 850 mm. Maximum turning on transverse carriage 560 mm. Bed width 425 mm. Fast Forward X/Z Axes 10,000 mm/min Work progress X/Z axes 7,000 mm/min Head Head shaft pitch 85 mm. Nose head DIN 55027-nº8 Main Spindle Morse Taper 5 Head speed 0-2,000 rpm Automatic head ranges 2 Main Motor Power 11 kW Turret Automatic Turret Type Turret Positions 8 Counterpoint Hydraulic tailstock rod outlet INCLUDED Ø of the tailstock shaft 96 mm. Tailstock shank travel 215 mm MORSE 6 tailstock cone Equipment Self-centering 3-jaw hydraulic chuck, diameter 300 mm INCLUDED 4-support bezel Ø450 mm. INCLUDED 3-support bezel Ø250 mm. INCLUDED Plate Protection INCLUD ...
pressure: 100 t stroke: 380 mm table surface area: 1740 x 996 mm pressure: 258 bar ajustment speed: 7,54 mm/sec work speed: 2,47 mm/sec return speed: 9,06 mm/sec dayligth: 700 mm table height: 720 mm total power requirement: 2,2 kW weight of the machine ca.: 1685 kg - Manually movable portal - Movable cylinder manually (left - right) - Cylinder extension up to the table - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) and a Movable frame (longitudinal-running) equipped to allow easy access to all allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The qual ...
pressure: 200 t stroke: 400 mm table surface area: Arbeitsbreite 1300 mm pressure: 243 bar oil volume: 64 dm³ ajustment speed: 5,73 mm/sec work speed: 1,84 mm/sec return speed: 7,08 mm/sec total power requirement: 3,0 kW weight of the machine ca.: 1690 kg Inner diameter of the cylinder [mm]: 320 Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing fitted. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS CNC controls ROEDERS WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 .. among of them simultaneous CNC axes: 3 X-axis travel: 500 mm Y-axis travel: 450 mm Z-axis travel: 300 mm SPINDLE / HEAD spindle revolutions (max): 42000 /min tool fixture: HSK A40 TOOL MAGAZINE number of positions: 40 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 3500 mm space requirements -front/back-: 3000 mm total height: 2750 mm total weight approx.: 9500 kg ATTACHMENTS zero-point workholding system: yes central lubrication system: yes closed cabin: yes European CE standards: yes Equipment: - Renishauw OMP400 - Megatool base clamping plate - Control update 2022 Special features: - Hydrostatic X, Y & Z axes - Coordinate grindi ...
pressure: 28.0 t throat: 225 mm stroke: 150 mm table surface area: 325 x 300 mm work speed: 2.0 - 9.8 mm/sek return speed: 12.8 mm/sek total power requirement: 4.0 kW weight of the machine ca.: 650 kg dimensions of the machine ca.: 1800 x 900 x 2000 mm - NC control to adjust the piston stroke - Selector switch for manual or semi-automatic operation - Flow control valve and pressure control valve - Integrated pressure gauge - Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 t stroke: 350 mm table surface area: Arbeitsbreite 750 x 260 mm pressure: 221 bar oil volume: 37 dm³ work speed: max. 9,8 mm/sec return speed: 14 mm/sec total power requirement: 3 kW weight of the machine ca.: 385 kg Inner diameter of the cylinder [mm]: 130 Piston rod diameter [mm]: 55 Diameter piston head [mm]: 80 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with variable speeds - Working table adjustable in height - Joystick to control piston and speed The workshop press (30T) has a fixed cylinder and a high adjustable work table (motorized). Equipped with pressure regulation, Pressure gauge, variable speed and a joystick to move the piston up and down to move off. With this joystick you can also control the speed adjust, making this motorized hydraulic press perfect for precision work is suitable. The data for this ad was created with ModulMWS - th ...
used
grinding diameter: 250 mm grinding length: 1000 mm centre height: 125 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t stroke: 380 mm table surface area: Arbeitsbreite 1100 mm pressure: 258 bar oil volume: 46 dm³ ajustment speed: 7,54 mm/sec work speed: 2,47 mm/sec return speed: 9,06 mm/sec total power requirement: 2,2 kW weight of the machine ca.: 970 kg Inner diameter of the cylinder [mm]: 220 Piston rod diameter [mm]: 90 Diameter piston crown [mm]: 120 - Movable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work The 100 ton hydraulic press is equipped with a movable cylinder (left- right) and a height-adjustable work table. Over and beyond it has a pressure regulation, 2 speeds, a joystick and a hand pump for precision pressing. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 28 t stroke: 180 mm table-size: 300 x 550 mm diameter of piston: 130 mm work speed: min. 2 m/sec work speed: max. 9,8 m/sec return speed: 20 mm/sec Max. pressure: 200 bar weight of the machine ca.: 0,65 t total power requirement: 4 kW dimensions of the machine ca.: 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled ...
pressure: 60 t stroke: 380 mm table surface area: Arbeitsbreite 750 mm pressure: 259 bar oil volume: 38 dm³ ajustment speed: 2,87 mm/sec work speed: 9,5 mm/sec return speed: 12 mm/sec total power requirement: 2,2 kW weight of the machine ca.: 540 kg Inner diameter of the cylinder [mm]: 170 Piston rod diameter [mm]: 75 Diameter piston crown [mm]: 100 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with 2 speeds - Working table adjustable in height - Joystick to move the piston up / down The 60 ton workshop press has a fixed cylinder and a height-adjustable work table (motorized). Equipped with Pressure regulation, manometer, 2 speeds and a joystick for the move the piston up and down. With this joystick you can use the piston precisely move, making this hydraulic press perfect for precision jobs suitable. The data for this ad was created with ModulMWS - the software s ...
angular steel - leg outwards: -- mm double T-iron on the x-axis: -- mm U-iron on the x-axis: -- mm : 50 mm : 150 mm throat: 120 mm total power requirement: 1,5 kW weight of the machine ca.: 0,36 t dimensions of the machine ca.: 1,1 x 0,8 x 1,4 m Exhibition machine NEW, year of construction: 2021 The PB 50-3 is a profile bending machine with manual adjustment of thetoprollervia a handwheel. The profile bending machine can be used in vertical and horizontal working position and are equipped with three driven rollers. The change between two or three driven rollers is done simply by the side handle of the machine. - Manual adjustment of the top roller with a handwheel - Vertical and horizontal work possibility - 3 driven rollers - Supplied with a standard roller set - Foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
drill diameter: 40 mm drilling length: 500 mm lip angle: 160 ° clearance angle: 1 - 10 ° toolpiece turning speed range: 42 / 28 / 21 U/min feed range: 0,6-1,2-1,5-3,0 mm/min grinding wheel dia. x width: 210 x 127 x 50 mm grinding spindle speed: 3150 U/min total power requirement: 3,3 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,0 x 1,0 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Complete disassembly Cylindrical grinding machine STUDER RHU 500 – MIRA Retrofit We have a complete exploded view from a STUDER RHU 500 cylindrical grinding machine, ideal for spare parts, repair or maintenance. The machine has been dismantled by MIRA Retrofit, specialists in the reconstruction and modernization of grinding machines, preserving its main assemblies and components for sale as spare parts. Available, among others: - Workpiece holder head and its components. - Tailstock headstock. - Grinding head and grinding assemblies. - Motors and drives. - Spindles and mechanical elements. - Trolleys, guides and moving elements. - Steering wheels, controls and mechanisms. - Hydraulic and pneumatic components. - Electrical elements. - Protections, supports and accessories. - Different original STUDER parts. Sale by individual components or possibil ...
Weight range bun approx.: 50-100gr Capacity: 2 rows approx. 2400 pcs/h with 4 pairs of cups (diameter approx. 12/13cm) weights approx. 85-100gr Tested and cleaned immediately available - Ribbons new
Manufacturer: Rheingetriebe Model No.: 3783S0071 107148 i= 40 / H8-RG T2= 420 Nm 2022 1.5kw The engine is new, may show traces of bearings, see pictures. Internal number: 609 903 257398532800
Used dough weigher and long moulder MERAND, type: RheoPan / -In very good condition- RheoPan Precision Dough Weigher with Double Dough Weighing - Very precise and gentle dough processing - Suitable for highly hydrated and fermented, but also for firmer doughs - 50 recipes can be stored - Program setting for easier cleaning Connection with other modules, such as circular knitters, etc. Visits and test runs are possible.
2 pieces dough divider RHEON, type: Twin DIvider 400 VX 202 incl. lifting tipper BMTEC Dough-friendly division from rye dough to Italian ciabatta. The dough is divided by weight and not volume, which means that there is no pressure on the dough and the gluten is preserved. - 1 or 2 rows - RHEON Gravimetric control - 2 pieces of machines + lifting device from BMTEC - Condition: Good, ready to use Visits and test runs are possible by arrangement.
BHS / Agnati / Fuma RHDPG – Complete corrugating line Year: Installed 2004; various component years Max. usable width: 2,400 mm; max. sheet length: 3,600 mm Listed line speed: up to 300 m/min, depending on product and individual units Installed in 2004; components of different years Equipment: BHS AF-P single facers for B/C and B/E flute Roll stands, splicers, BHS web guide, preheaters and glue unit Agnati GPA 3+1 double facer Slitter scorer and cut-off BHS stacker and Dücker outfeed Automatic SRP GK-1200 starch kitchen Reference: PP-58376 Further information on request.
- Available now Rheon V4 Stress Free Weigher/Dough Divider Type VX 212 Power approx. 800kg Dough belt width 130-150mm Product weight approx. 150 -1,200g with single and double-row guillotine with spreading station with single and double-row weighing and outfeed belts with star cutter lubrication with additional guillotine lubrication with 2 flours with digital control with funnel for approx. 50kg dough - Technically tested, cleaned and overhauled
Aircooled chiller RHOSS WINPACK SE TCAESY 2110 102.5 KW Cooling capacity: 102.5 kW / 29.15 tons (12/7 — 35°C) Year of manufacture: 2015 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 1 pcs. Bitzer GSD80295VAB4-1 (scroll) + 1 pcs. Bitzer GSD80182VAB4-1 (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump LOWARA, expansion vessel, buffer tank. Dimensions: 2.65x1.35x2.45 m. Weight: 1110 kg. Working hours: 10659/10659 h. Condition: Good
pressure:60 t distance between columns:650 mm stroke:220 mm distance table/ram, max. stroke up, adjustment up:410 mm table surface area:600 x 525 mm pressure of drawing cushion in table:5 t stroke of drawing cushion in table:80 mm table height over floor:900 mm side window:200 mm ram surface:560 x 490 mm dimensions (WxDxH):1,9 x 1,3 x 2,7 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick FGS 600 drawing cushion in table:hydraulic foundation pit:not necessary
Vintage : 2023 Appellation : Côtes du Rhône Region : Vallée du Rhône Quantity : 8 bottles Capacity : 75 cl Classification : Côtes du Rhône Blanc 2023 - Domaine Guigal - Vallée du Rhône Packaging : case of origin Auction-ID: A1-51167-308
Includes: (1x) wooden box. Auction-ID: A1-50340-12
Includes: (1x) wooden box. Auction-ID: A1-50340-113
Includes: (1x) wooden box. Auction-ID: A1-50340-112
Working width 130mm Auction-ID: A1-47367-3501
Working width 130 mm. Planks with slight rejects. Auction-ID: A1-47367-3545
130mm operating width. Auction-ID: A1-47367-3517
130mm operating width. Auction-ID: A1-47367-3514
A Moving Die Rheometer Alpha for rheological testing and vulcanization analysis of rubber compounds is available. Test standards: ASTM D5289/ISO6502, max. temperature: 200°C, frequency: 1667Hz, strain: 0.2°/0.5°, test pressure: 8000kPa. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible.
Four identical Nagel + Hermann transfer and placement machines for transfer motifs (rhinestone, hotfix or similar) are available. Colors: 6, shapes: 2, production capacity: 5000elements/h, machine dimensions X/Y/Z: approx. 2000mm/1050mm/1750mm, weight: approx. 320kg. Including PC, CAD software, 12x conveyor plates as well as various spare parts and tools. Documentation available. An on-site inspection is possible.
Two identical Nagel + Hermann transfer and setting machines for transfer motifs (rhinestone, hotfix, or similar) are available. Colors: 6, shapes: 2, production output (2-color): 8000elements/h, feed bowl diameter: 200mm. Machine dimensions X/Y/Z: approx. 2450mm/1100mm/1800mm, weight: approx. 400kg. Including PC, CAD program, 8x feed plates, 22 feed bowls, 4 rotary tables, as well as various spare parts and tools. Documentation available. An on-site inspection is possible.
Three identical Nagel + Hermann transfer and placement machines for transfer motifs (rhinestone, hotfix or similar) are available. Production capacity: 7000elements/h, round element diameter: 2mm/3mm/4mm/5mm/6mm/8mm. Including laptop, CAD software, feed plate, various tools and spare parts. Documentation available. An on-site inspection is possible.
A Nagel + Hermann transfer and placement machine for transfer motifs (rhinestone, hotfix or similar) is available. Colors: unlimited, shapes: unlimited, production capacity: 5000elements/h, max. motif dimensions X/Y: 300mm/300mm, machine dimensions X/Y/Z: approx. 820mm/650mm/650mm, weight: approx. 120kg. Including PC notebook, CAD software, 4x conveyor plates, 2x mounting plates as well as various spare parts and tools. Documentation available. An on-site inspection is possible.
Weight 25 kg Auction-ID: A1-50595-41
LED headlights for construction machinery in the version for the left side of the vehicle (LH). Robust housing with integrated LED light system, electrical plug-in connection and mounting bracket. Suitable as a replacement or surface-mounted spotlight for construction and work machinery. Technical data: - Operating voltage: 12 V - Version: left side of the vehicle (LH) - Bulb: LED - ECE approval - Electrical plug-in connection - Mounting mount on the housing Compatibility with the respective machine model must be checked by the buyer. All dimensions, performance and weight specifications are approximate and non-binding. Auction-ID: A1-50849-33
Brookfield DV-III Ultra Premium Lab Rheometer. Auction-ID: A1-50994-10
LED headlights for construction machinery in the version for the right side of the vehicle (LH). Robust housing with integrated LED light system, electrical plug-in connection and mounting bracket. Suitable as a replacement or surface-mounted spotlight for construction and work machinery. Technical data: - Operating voltage: 12 V - Version: right side of the vehicle (LH) - Bulb: LED - ECE approval - Electrical plug-in connection - Mounting mount on the housing Compatibility with the respective machine model must be checked by the buyer. All dimensions, performance and weight specifications are approximate and non-binding. Auction-ID: A1-50849-78
Vintage: 2024 Appellation: Côtes du Rhône Region: Rhône Valley Quantity: 6 bottles Capacity: 1.5 L (magnum) Classification: Magnum 1.5 L - Saint Esprit 2024 - Delas Frères - Côtes du Rhône - Vallée du Rhône Packaging: case of origin Auction-ID: A1-51167-429
maximum number of results exceeded
please refine your search
53 € 
