rh used for sale

Dough divider weigher Model: Stress Free Divider VS - VX 021 Bread weigher in stainless steel design Weight range approx. 200 to 1200 g Hopper approx. 80 kg for doughs with high TA Touch control Output adjustable ca. max. 800 pieces/hour Machine mobile with 2 brakes Belt Flourer and Belt Scale Connection 400V, 16A-CEE plug Machine More bakery equipment in stock!

MDR 2000 Rheometer Manuf.: Alpha Model 81001 220V 5amps Power 1000 VA Air pressure required PSI 120 max. / 70 min.

RHOSS Chiller Air-cooled, 705KW, built in 2004, refrigerant R407c Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

.Capacity:10~60 pcs/min .Weight:10~300 g .Dimension:2,080x 970x 1,540 mm .Machine Weight:500 kg

Crankcase for MWM RHS 518 A, 8 cylinders for sale. Housing is in very good, used condition, see detail photo. Previously used as an emergency power generator with few operating hours. Part Number: 26.01-82/04 26.01-82/34 E 26.100-142/04 26.100-142/34 E

Used dough weigher Rheon VX212 Twin Divider from 2009 optionally with belt table including frequency controller for sale. The machine is visually and technically in good condition and can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. The Rheon dough divider weigher can optionally be offered as a completely overhauled version. - Year of construction 2009 - 800 kg per hour - Accurate dough weighing - With digital control panel - with program memory - Machine is checked and cleaned - Trade-in and delivery on request - Machine can be inspected in our warehouse and be tested

Dosing bunker with chain belt discharge Manufacturer: HUBER Fördertechnik Type: RHKG160/8AA Year of Make: 2001 specifications: Machine dimensions: Length: 8,500 mm, Width: 2,400 mm, Height: 2,500 mm Center distance: approx. 8,000 mm Conveyor width: 1,600 mm Side wall height: approx. 1,550 mm Capacity: approx. 20 m³ Drive power: 0.75 kW for the conveyor belt Drive power: 4.0 kW for the dosing station

Digestate Dryer - RHS Rhino Agitator Dryer - Manufacturer: RHS - Model: MCT10 - Year of Manufacture: 2018 - Power Output: 33 kW - Operating Voltage: 3-phase, 400V, 50 Hz - Control Voltage: 24V DC - Power Factor: ~0.8 (capacitive) - Frequency: 50Hz - Fuse: minimum 100A - Equipped with: Underbody cleaning on one unit, control cabinets, stainless steel feed screws, heat exchanger, heating water pump, supply air fans - Quantity: 3 units - Operating hours: approx. 7000 hours - Variants: One machine equipped with underbody cleaning Functionality The RHS Rhino Dryer is engineered for the drying and hygienization of fermentation residues (digestate) and slurry. It supports efficient moisture reduction, stabilizing the material and reducing odor. The feed system utilizes DN 150 pipelines with an eccentric screw pump, and the dried material is discharged through stainless steel feed screws for  ...

Fully automatic continuous system, 30cm belt width with hold-down belt and additional belt insert with turning station Frying length 2.35m with digital control for 7 different programs Bandgesch, adjustable mobile with fully automatic quark ball station with additional jolting for wreaths mobile tested and cleaned Immediately available from stock

Aircooled chiller RHOSS TCAEY133 33.8 kW Cooling capacity: 33.8 kW / 9.61 tons (12/7 — 35°C) Year of manufacture: 2015 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Panasonic C-SCP510H38B (scroll) Type of refrigerant: R410A Number of fans: 1 pcs. Dimensions: 1.6x1x1.57 m. Weight: 460 kg. Condition: Good

Rheinmetall axle Verse No: 2520-12-341-1309 TKZ : 2300002-100 220 000

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNA Vibrating Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwing TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHTyp: SRC-N 250-2LSer.- No: 03613 Year of Construction: approx. 2000Pot Diameter Bottom: 250 mmPot Diameter Top: 380 mmPot Inner Height: approx. 70 mmSorting Lane Width: 30 mmTotal Height (Drive + Pot with Sorting Path): 390 mmOscillation Frequency: 100 Hz / 6000 min-1Power supply: 230 volts, 50 Hz control unit

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNA Shaking Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwing TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHTtype: SRC-N 250-2LSer.- No: 03609 Year of Construction: approx. 2000Pot Diameter Bottom: 300 mmPot Diameter Top: 350 mmPot Inner Height: approx. 25 mmSorting Track Width: approx. 30 mmTotal Height (Drive + Pot with Sorting Track): 380 mmOscillation Frequency: 100 Hz / 6000 min-1Power supply: 230 volts, 50 Hz

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNA Shaking Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwing TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHTyp: SRC-N 250-2LSer.- No: 03611 Year of Construction: approx. 2000Pot Diameter Bottom: 300 mmPot Diameter Top: 350 mmPot Inner Height: approx. 25 mmSorting Track Width: approx. 30 mmTotal Height (Drive + Pot with Sorting Path): 380 mmOscillation Frequency: 100 Hz / 6000 min-1Power supply: 230 volts, 50 Hz- The

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNAVibrating Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwdriving TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHType SRC-B200-2RBeauguration: approx. 2000Pot diameter top: 300 mmPot diameter bottom: 180 mmPot inner height: approx. 45 mmSorting lane width: approx. 5 mmTotal height (drive + pot with sorting track): 260 mmPower supply: 230 volts, 50 Hz.- RNA control device, type ESG 90 for Adjustable

Grinding wheel dimensions (od x id x width): Ø350 x Ø150 x 125 mm, Ø min/max to be rectified: 1 / 75 mm, Peripheral speed of grinding wheel (m/s): 30 m/s, Regulating wheel width: 125 mm, Min/max speed of regulating wheel (r.p.m.): max 350 r.p.m., Diamond grinding (auto/manual): Hydraulic / Manual, Diamond grinding speed: adjustable, Lubrication (auto/manual): Car, Control type (CNC/manual): MANUAL, Dive (auto/manual): AUTOMATIC, Regulating wheel dimensions (od x id x width): Ø225 x Ø120 x 125 mm, Grinding wheel width: 125 mm, Maximum length to be rectified in plongeé: 125 mm, Total power: 8 Kw, Voltage: 380 V, Long: 1.650 mm, Width: 1.000 mm, Tall: 1.400 mm, Weight: 2.480 kg

Charger (loading and unloading), High: 2,000 mm, Long: 2.700 mm, Width: 2.100 mm, Weight: 6.580 kg, Voltage: 220/380 V, Total power: 28Kw, Accessories included: Feeder / Feeder, Grinding wheel width: 250 mm, Regulating wheel width: 250 mm, Ø min / max to grinding: 3/125 mm, Control type ((cnc / manual): Manual, Maximum infeed grinding length: 250 mm, Regulating wheel dimensions (od x id x width): 350 x 250 x 125 mm, Ø grinding wheel dimensions (od x id x width): 500 x 250 x 304.8mm

Continuous leaching system with double lye curtain with heating Cloth feed via Velcro fastener Placement on baking tray 60/80 without salter Speed adjustable Output approx. 400 sheets per hour

A RHETA conveyor belt is available. Center distance: approx. 9300mm, belt width: 500mm. On-site inspection is possible.

Demonstration machine as good as new! hydraulic tapping machine with parallel arm Model: RHR24 (M3-M24) Standard - Ball bearing wear-free parallel arm, radius: 1800mm - Hydraulic system 400 V / 3Ph (mounted in the lower box) - Digital speed display and digital depth control, duty cycle of your choice - Manual: Direction of rotation right/left by means of press studs - Automatic: digital input of depth, at the set depth the direction of rotation is automatically reversed - Wide speed range, working and return speed Separately electronically adjustable (by means of frequency converter) - Clamping table 800 x 600 mm with T-slots - Micro spray system for tool lubrication (integrated in the machine head) - Lower box - Quick-change mount for Bilz thread holders, among others

Rheon Twin divider Type: VX 202 Year of Make: 2008 With 1 or 2 Huge operation Weight range: 75gr - 1200gr Hourly output max. 400kg / h with flour shaker Star edge lubrication Funnel for max. 50Kg dough Stainless steel cladding Dough width at discharge: 1 row: approx. 130 - 150 mm 2 rows: approx. 65 - 75 mm Weighing range: 1 row: approx. 150 - 1200 gr 2 rows: approx. 75 - 600 gr Max. discharge speed per minute: 1 row: 20 pcs/min 2 rows: 40 pcs/min Rheon dimensions: Height: 185cm Width: 386cm (with table) Depth: 100cm with conveyor belt Table for working Working height: 98cm (adjustable) with ingredient container

Rheon Cornucopia Type: KN200 Pieces of dough: 10-300 gr. Capacity : 10-60 pieces/min digital control Stainless steel cladding rollable on castors Height: 160cm Width: 80cm Depth: 150cm

Müstang demolition pulverizer RH16, - with 360° rotator, - 1500 kg dead weight, - for 12 - 20 t excavators, - Year of construction 2025

Used dough divider RHEON, type: Twin DIvider 400 VX 202 Dough-friendly division from roe dough to Italian ciabatta. The dough is divided by weight and not volume, which means that there is no pressure on the dough and the gluten is preserved. - 1 or 2 rows - RHEON Gravimetric control - Capacity: 800 kg/h - Initial width: 130-150 mm - Weight range 1 row: 150 - 1,200 g - Weight range 2 rows: 75 - 600 g - Condition: Good, ready to use Visits and test runs are possible by arrangement.

Müstang demolition pulverizer, NEW!, Year of construction: 2025, 1050 kg, Suitable for 9-16 t excavators

NEW, Year of manufacture 2024, Suitable for 7-14t excavators

- Rheon dough weigher - Twin Divider 400 VX202 - Year of construction 2004

Mustang RH20 demolition pulverizer, Technical specifications:, - Weight: about 1800 kg, - Application area: For excavators from 18 to 22 tons, - Hydraulic pressure: 300 bar, - Hydraulic flow: 140/200 L/min, - Max. back opening: 670 mm, - Pin sizes: 80 mm diameter, - Dimensions: 195 cm long x 56 cm wide x 121 cm high (excluding pallet), - Rotation: 360° hydraulic rotation, - Other features: cutting for processing reinforcing steel, wear-resistant plates and replaceable teeth on the jaws

Two mechanical large-format double-column eccentric punching presses Rhodes (UK) are available. Press force: 350t, table dimensions X/Y: 1750mm/920mm, ram dimensions X/Y: 1550mm/615mm, ram stroke: 101mm, ram adjustment: 100mm, stroke rate: 50 strokes/min, max. installation height: 483mm, side opening X/Y: 630mm/380mm, table height: 933mm, weight: approx. 43000kg. Documentation available. On-site inspection is possible.

grinding diameter: - mm grinding length: - mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rhoen stress free devider VS VX021 2009 Rhoen Stress Free Divider VS – VX021 Well-maintained Rhoen Stress Free Divider VS from 2009. Model VX021. Designed for durability and smooth performance, this unit is ideal for reliable, stress-free operation in demanding environments. In good working condition and ready for use. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Prescott Rheo-Line Moving Die Rheometer (MDR) With Cutter

General SKU219N105 LocationBarneveld MakeRhewa Main Features MaterialMild steel Specified Features - Miscellaneous transport Capacity0,4 - 150 KG With jacketcheck Miscellaneous transport MaterialMild steel General Type82basic T5646 TC7033 Mach.No.103758 Extra Specifications230VAC/50|60Hz/15VAPowdered foodsGeneric medicinesTea, herbs & coffeeStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersDetergent & surf.SugarOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicMiscellaneous transportRhewaIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Food & Feed > StarchIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > SpicesIndustries > Chemical > Plastic & polymersIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Ind ...

A four-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible.

Roller / roller for pastry lineProduct description:Manufacturer: RheonType: 818Condition: used, not testedOuter dimensions: 95 x approx. 100 x 33 cm (WxDxH)Details see pictures

â Product description âœ" Manufacturer: Rheon âœ" Model: Twin Divider VX 201 âœ" Year of manufacture: March 2004 âœ" Condition: used, cleaned, in working order âœ" Machine type Dough divider âœ" el. Connection: 3x 380 V / 0.93 kW / 50 Hz / 3.37 A âœ" Outside Dimensions: W.: 95 cm, D.: approx. 235 cm, H.: 170 cm The machine worked until recently in the bakery We picked it up, completely disassembled it and cleaned it After cleaning it we did not connect it should be checked first Partial belts must be replaced Details see pictures.

End mill, shank cutter, cutter, slot cutter, wood cutter -Two-knife cutter -Roughing-finishing end mill -4x: Milling cutter Ø 4 x 12 mm -7x: Milling cutter Ø 5 x 12 mm -10x: Milling cutter Ø 6 x 14 mm -1x: Milling cutter Ø 8 x 20 mm -5x: Milling cutter Ø 10 x 20 mm -4x: Milling cutter Ø 11 x 22 mm -3x: Milling cutter Ø 12 x 22 -Hole: Ø 10 mm -Type: M623 -Quantity: 34 pieces -Sale: only complete set -Weight: 3.6 kg

diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manufacturer: Bosch, injection pump from generator MWM RHS 518V16 -Injection pump: Bosch EP/RSUV300-750P9/332/1R PE8P120/520RS190 -Feed pump: Bosch FP/K 22 P11 -Shaft: Ø20 - 25mm / M18x1.5 -Individual components: see photos -Dimensions: 1000/170/H290 mm -Weight: 41 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Manufacturer: SEW-Eurodrive, Servomotor Permanent Magnet Motor -Type: CFM71L/TF/RH1M/SM50 -Speed: 0 - 3000 rpm -Voltage: 400 V -Shaft: Ø 19 x 35 mm -Technical data: see photo of the type plate -Number: 3x servo motors available -Price: per piece -Dimensions: 350/117/H190 mm -Weight: 11.8 kg/pc.

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan -Manufacturer: Ziehl-Abegg, axial fan EAC GR45G-4EK.41.2R -Engine: RH350-4EK -Power: 0,30 kW / 1330 U/min -Fan wheel: diameter 365 mm -Protection rating: IP44 -Dimensions: 430/430/H235 mm -Weight: 7.7 kg

winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: DIEPA Drahtseilwerk Dietz, crane rope winch rope Ø 22 mm -Rope type: DIEPA X 43 Ø 22 mm RHOL 1770 with 1 end with full thimble, see photos -Length: 44 m -Number: 4x wire rope available -Price: per piece -also other crane ropes: available -Transport dimensions: Ø 700 x 510 mm -Weight: 120 kg / piece

pressure: 28 t piston stroke: 180 mm diameter of piston: 130 mm table-size: 300 x 550 mm working feed: 2 - 9,8 mm/sek return speed: 20 mm/sec Max. pressure: 200 bar bending capacity - flat iron: 200 x 10 mm weight of the machine ca.: 800 kg dimensions: ca. 1150 x 1103 x 750 mm The horizontal hydraulic press (28 ton) can be used for many different metal working jobs. The press has a piston stroke of 192 mm and can be equipped with all kinds of tooling for specific bending or straightening jobs. We supply a standard toolingset with this press including a stampholder and backgauge. However, we also produce custom-made tooling for your specific request. Thanks to the NC-control you can easily set the cylinder stroke and save up to 100 working cycles. With this horizontal hydraulic press you are able to bend, straighten, notch, cut and form. A universal hydraulic press that serves all your n ...

Table with treadmill Pretzel table Rheon -Table with treadmill on castors -side wood can be folded down (a wooden plate is 30cm deep) -unfolded it is 123cm -Band width: 52cm -Strap length approx., 250cm

Applications-sweet Dough Products, filled biscuits & potato product weight: 10-90 grams (0.35-3.17 ounces) of spherical product output: maximum 6000 pieces per hour (differs according to product weight) hourly extruding capacity: 180 kilograms (396.83 pounds) per hour hopper capacity: 15 liters

Rheon Free divider

Rheon, Type Cornucopia KN 400