rg used for sale

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

Signal module ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW SES 122/1 PL - No.: 376199000 Article no.: 137 93 63 218 000056 Switching capacity: max. 20 VA Switching capacity: max. 60 V AC/DC, 1 A Supply voltage: 4,2 - 8.5 V DC with reed relay RGK 50/1 IP40 New ! Dimensions: 80 x 80 x 30 mm

Kamm relays, relays, small relays, folding armature relays, 10 pieces RGI, VEB Relaistechnik Großbreitenbach-Ilmenau NSF 30.4-212 ( NSF30.4-212 ) TGL 200-3796 Control voltage: 12 V DC 4 changeover New ! dimensions ( single relay ): 33 x 19 x 38 mm

Pressure relief valve VICKERS RG 3F2 20 ( RG3F220 ) max. 135 bar New ! Dimensions: 110 x 52 x 40 mm

Comb relays, relays, small relays, folding armature relays, 10 pieces RGI, VEB Relaistechnik Großbreitenbach-Ilmenau NSF 30.2-112 ( NSF30.2-112 ) TGL 200-3796 Control voltage: 12 V DC 2 changeover New ! dimensions ( single relay ): 33 x 19 x 38 mm

Pressure relief valve VICKERS RG 3F3 30 ( RG3F330 ) max. 135 bar New ! Dimensions: 110 x 52 x 40 mm

Kammrelais, relays, small relays, folding armature relays, 10 pieces RGI, VEB Relaistechnik Großbreitenbach-Ilmenau NSF 30.1-112 ( NSF30.1-112 ) TGL 200-3796 Control voltage: 12 V DC 2 changeover contact New ! Dimensions ( single relay ): 33 x 19 x 38 mm

Pressure relief valve VICKERS RG 3F2 30 ( RG3F230 ) max. 135 bar New ! Dimensions: 110 x 52 x 40 mm

Kamm relays, relays, small relays, folding armature relays, 10 pieces RGI, VEB Relaistechnik Großbreitenbach-Ilmenau NSF 30.1-206 ( NSF30.1-206 ) TGL 200-3796 Control voltage: 6 V DC 2 changeover contact New dimensions ( single relay ): 33 x 19 x 38 mm

Flow indicator EGEM SG 25 RGW 250-76 New ! Dimensions: 190 x 170 x 180 mm

Kamm relays, relays, small relays, folding armature relays, 10 pieces RGI, VEB Relaistechnik Großbreitenbach-Ilmenau NSF 30.1-024 ( NSF30.1-024 ) TGL 200-3796 Control voltage: 24 V DC 2 changeover contact New ! dimensions ( single relay ): 33 x 19 x 38 mm

Kamm relays, relays, small relays, folding armature relays, 10 pieces RGI, VEB Relaistechnik Großbreitenbach-Ilmenau NSF 30.2-024 ( NSF30.2-024 ) TGL 200-3796 Control voltage: 24 V DC 2 changeover New ! dimensions ( single relay ): 33 x 19 x 38 mm

Gear motor, three-phase worm gear motor RGM RUHRGETRIEBE 0,0,045 kW 2 rpm Gearbox: FLENDER Type: I.40 NFBR 30/1 0/90 Hollow shaft diameter: Ø 19 mm, shaft length: 82 mm groove width: 6 mm flange1: diameter: Ø 50 mm, Bolt circle diameter: Ø 65 mm 4x threaded hole: M6 x 1.0, depth: 12 mm flange2: diameter: Ø 80 / 120 mm, bolt circle diameter: Ø 65 mm 4x U-hole: Ø 9 mm, length: 14 mm motor: SRFU 0,09/4-B52 0,045 kW 1360 rpm 220 - 240 / 380 - 420 V 3AC 50 Hz IP54 Ersatzteil u.a. ffor cylindrical grinding machine NOMOCO VSR5-230-CNC ! used, tested ! Dimensions: 285 x 165 x 155 mm

Relay, small relay, horizontal, 10 pieces RGI, VEB Relaistechnik Großbreitenbach-Ilmenau GBR 10.1-11.05 ( GBR10.1-11.05 ) TGL 73212 Control voltage: 5 V DC 1 changeover contact Switching capacity: 250 V AC, 8 A New ! dimensions ( single relay, without contacts ): 28 x 25 x 11 mm

Farbwalze / /roller for offset printing machines Ryobi 520 / 522 / 524 HX / HXX / GX Art.: PS3624 Ersatzteil Nr. / parts No.RG405409 (552252270) Dimensions: 45.5 x 24.0 / 515.0 / 607.0 mm. not original Portugal

Kamm relays, relays, small relays, folding armature relays, 10 pieces RGI, VEB Relaistechnik Großbreitenbach-Ilmenau NSF 30.4-106 ( NSF30.4-106 ) TGL 200-3796 Control voltage: 6 V DC 4 changeover smaller quantities possible. New !br /br /New ! dimensions ( single relay ): 33 x 19 x 38 mm

Kamm relays, relays, small relays, folding armature relays, 10 pieces RGI, VEB Relaistechnik Großbreitenbach-Ilmenau NSF 30.4-140 ( NSF30.4-140 ) TGL 200-3796 Control voltage: 40 V DC 2 changeover (also 5 pack available) New ! dimensions ( single relay ): 33 x 19 x 38 mm

True color sorter with 2 RGB cameras and 2 NIR cameras, working width 1 chute with 270 mm, for grain 2-5 t/h, sunflower seeds up to 1 t/h, mustard up to 0.7 t/h

Coaxial connectors, BNC connectors, 35 pieces RS PRO 405-001 546-4875 Type: Connector, straight Impedance: 50 ? for RG58A cable New, with documents ! Dimensions ( plug ): 27 x 15 x 15 mm Dimensions ( packaging ): 290 x 170 x 90 mm

TFT Display Control Board Board KORDIS NCB100X1 Supply voltage: 12 V DC Power consumption: 30 watts analog RGB input New ! Dimensions : 145 x 102 x 15 mm

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, slide valve, pneumatic control valve, angle seat valve, valve -Manufacturer: burkert, pneumatically operated 2/2-way angle seat valve unused OVP -Type: 2000 A 50.0 NBR RG G2 -Connection: DN50 PN25/Rg5 -Dimension box: 370/170/H90 mm -Weight: 4.6 kg

Fan motor, electric motor VEM EMO 56 K 4 ( EMO56K4 ) TGL 20675 0,12 kW 1360 rpm 220 / 380 V 3AC IP 44 shaft diameter: Ø 11 mm fan motor for VEM welding rectifier RGSa 315 !, among others used, tested ! Dimensions: 150 x 115 x 150 mm

Gear motor, three-phase worm gear motor RGM RUHRGETRIEBE 0,0,18 kW 92 rpm Transmission: E3 Type 3F Gear ratio: 15 Shaft diameter: Ø 12 mm, Shaft length: 24 mm Groove width: 4 mm Flange diameter: Ø 50 / 80 mm bolt circle diameter: Ø 65 mm 4x threaded bore: M6 x 1.0, continuous motor: AF63/4B-7 0,18 kW 1380 rpm 220 - 240 / 380 - 420 V 3AC 50 Hz IP54 used, tested ! Dimensions: 285 x 165 x 155 mm

Belt Conveyor, Belt Conveyor, Conveyor Belt, Belt Conveyor RNA, RHEIN-NADEL AUTOMATION GmbH Type: FP 120 Load: max. 10 kg/m Belt length: 1050 mm Belt width: 50 mm Conveyor width: 50 mm diameter drive roller: Ø 50 mm Gearbox: RGM, RUHRGETRIEBE KG TYPE 3F i: 15 gear ratio Chain transmission: 1 : 1,1,27 Engine: RGM, RUHRGETRIEBE KG AF63/4B-7 0,18 kW 1380 rpm 230 / 400 V 3AC 50 Hz IP54 used, tested ! Dimensions: 2000 x 550 x 660 mm

Key data: 2400 , 400

CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...

Key data: 340 mm, 950 mm

Okuma LU3000 EX-MY 2SC 950 BigBore Year of construction : 08/ 2014 Control : OSP P 300 L Suite Power on : approx. 300 h Spindle run : approx. 100 h Specifications Rotation range up to Ø [mm] 340 Vibration diameter over cross slide / bed [mm] 340/580 Travel X-axis tool carrier "A" [mm] 260 Y-axis travel tool carrier "A" [mm] 120 (+70/-50) Z-axis tool carrier travel "A" [mm] 630 1.030 Travel X-axis tool carrier "B" [mm] 160 Z-axis tool carrier travel "B" [mm] 615 1.015 Spindle: Main spindle - speed [1/min] 42-4200 Main spindle - power [kW] 22 Main spindle - torque [Nm] 427 Main spindle - bore Ø [mm] 80 Main Spindle - Nose A2-8 Feed: Rapid traverse X/Y/Z - axes [m/min] 25/15/30 Rapid traverse C - axis [1/min] 200 Working feed X/Z - axes [mm/rev] 0.001-1.000 Tool carrier "A": Tool system BMT 60 Okuma Tool Slots [pcs] 12 Driven Tools [pcs] 12 Driven tools - sp ...

Directional control valve, 2/2 way angle seat valve with pneumatic actuator COCORDIA FLUIDTECHNIK 214/50/RG 2T 1231454 PN16 DN50 Rg5 New ! Dimensions: 250 x 250 x 125 mm

Digital DC Drive Mentor 2 M75 RGB 14 30 KW

Directional control valve, 2/2 way angle seat valve with pneumatic actuator COCORDIA FLUIDTECHNIK 700/50/RR2 T-3 1300304 PN16 DN50 Rg5 New ! Dimensions: 290 x 290 x 160 mm

Holomonitor 600 M3 Tracking System Measurement technique: single wavelength transmission digital holographic microscopy Image types: intensity and quantitative phase contrast image (DH mode) phase contrast image (PC mode) Light source: monochromatic laser source (DH mode) Luxeon 1 watt LED (PC mode) Sample stage: manual or automated XY stage up to 150 mm × 120 mm travel range automated Z stage up to 20mm travel range Camera 1280 × 1024 pixels, 8 or 10 bits (hologram) 2048 × 1536 pixels, 8 bit RGB (phase contrast) Available objectives: standard objectives 10-100x Objective mounting: 4-position objective turret with manual or automated function Computer: PC workstation with latest Intel processor. Software: Holostudio™ imaging and cell analyze software Performance Lateral resolution: objective dependent, down to 500 nm 100x objective Field of view: objective depen ...

1 Gebr. Boiler --------------------------- Manufacturer : LOOS International Type : U-HD 500 Heating surface approx. : 9 m² Capacity : 500 kg/h Ab. Operating overpressure max. : 13,00 bar Increased test pressure : 24.05 bar Water capacity full approx. : 770 l Year of construction : 2007 CE mark : 0036 equipped with Weishaupt combination burner oil&gas Type RGL3/1-E, ZMD, 15-500 mbar, gas control system, Control cabinet with Siemens C7, feed water pump and the existing coarse and fine fittings

1 Gebr. Boiler ------------------------------------ - mounted on frame - Manufacturer : LOOS, Gunzenhausen Type : UL - S Heating surface approx. : 80 m² Capacity : 4,000 kg/h Bish. Ab. Operating overpressure : 10 bar Increased test overpressure : 18 bar Water content at NW approx. : 5.930 l Water capacity full approx. : 8.020 l Year of construction : 1994 equipped with Weishaupt combi burner gas&oil type RGL 10 / 1 - D, ZMD version, separate control cabinet, feedwater pump and the existing coarse and fine fittings.

Buchholz relays, transforamtor protection relays EGEM BF 25/6 5 RGW 250-76 New ! Dimensions: 190 x 170 x 240 mm

Permissible operating overpressure: 6.0 bar Permissible flow temperature: 120 C Permissible boiler power: 400 kW Heating output: 444 kW Content: 380 liter Burner: Weishaupt RGL 3/1 - E Year: 1994 Fuel: Heating oil EL and natural gas Subject to prior sale - errors possible Internal Reference Number: D-1176