rg used for sale

specifications: - Welding current 315 A 80% ED 280 A 100% ED - Welding current adjustable from 50 A to 315 A - Current consumption 400 V / 19.5 A / 10.7 kVA - with: - E.- welding cable - Ground cable - Connection cable - Space requirement approx. W 600 x H 900 x D 1000 mm - Weight approx. 200 kg

sheet width: 2050 mm plate thickness: 3 mm distance between columns: 2100 mm back stop - adjustable: 600 mm connected load: kW weight of the machine ca.: 1,1 t dimensions: 2,7 x 2,1 x 1,4 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 3 mm total power requirement: 3 kW weight of the machine ca.: 1600 kg dimensions of the machine ca.: 2.060 x 1.140 x 1.210 mm Producer: OSTAS Type: RGM 1050 x 3 YOM: new Max. Shearing Length: 1.050 mm Shearing Capacity: 3 mm Shearing Angle: 2°30 Strokes Per Minute: 35 d/d Motor Power: 3 kW Table Width: 510 mm Table Height: 820 mm Rear Gauge Distance: 500 mm Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm Weight: ca. 1.100 kg Additional information: • Manual backgauge with 500 mm stroke • Squaring arm with T-slot, stopper and ruler • Foot pedal • Front sheet holding arms • Cutting line lighting • Protection Cages optional: • Cutting unit counter • Motorised backgauge with 500 mm stroke • Backgauge with NC control • Pneumatic Sheet Support System • Optical security bar • 0-180° angle cutting The data for thi ...

workpiece length: 5000 mm swing dia.: 1100 mm clamping length: 6000 mm grinding diameter: 1100 mm grinding wheel diameter: 1300 mm workpiece weight: 2500 kg main drive motor: 22 kW crankshaft bearing diameter: 275 mm steady: 100-250 mm speeds of tool: 400/500 U/min workpiece turning speeds: 20-40 U/min total power requirement: kW weight of the machine ca.: 30 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 3 mm distance between columns: 1600 mm back stop - adjustable: 600 mm connected load: 3 kW weight of the machine ca.: 1,1 t dimensions: 2,06 x 2,14 x 1,21 m Demonstration machine with small paint damage. The machine works quietly and is powered by its geared motor Braking system energy-saving. Our machine is welded as a monobloc body from ST42 quality material. The knives of the machine are of 2379 quality and the brand name is BOHLER. These high-quality knives guarantee precise cutting. Emergency stop button, foot switch and finger guard are included standard equipment. (Documentation in English only) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used webbing conveyor belt Manufacturer: SUTCO Type: RGF GB 1400 Year of construction: 2016 Specifications: Conveying width: approx. 1,400 mm Centre distance: approx. 9,620 mm Path length: approx. 5,061 mm Gooseneck: yes Drive power: 2.2 kW

Surface grinder where the magnetic table can be tilted at an angle of -7°/0°/+7° Magnetic table of 600 mm Max horizontal stroke of grinding wheel: 610 mm Longitudinal travel X-axis (autom.): 610 mm Dimensions of the table: dia 600 mm Motorpower: 10 hp Weight: 6 ton Cooling system: yes

Motor-driven NC rotary table Induction via hirth toothing -> 360 teeth Manufacturer: Rückle Type: RGS 5 Clamping surface: 1200 mm x 1000 mm Clamping grooves: 5 pieces Slot dimensions: 22 H7 mm Slot spacing: 160 mm Centering bore: 100 H6 mm Condition: Very good (used) Optional with machine bed

A well-preserved extrusion recycling product EREMA series RGA 80 TE for processing polyethylene (PE), polypropylene (PP), . Power up to 250 kg/h, electrics 240/400 volts, 50 hearts, short-term available. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

An unrenovated very little used ready-to-use extrusion-recycling product EREMA type RGA 1716 TE-VSV for processing shredded washed PET flakes. The quality of the rPET for direct contact with food according to the standards of the F.D.A. (USA) and EFSA (EU) can be achieved with an additional machine with SSP technology. Year of construction 2001, Extruder screw Ø 160 mm (L/D about 34), drive 200 kW, EREMA screen changer type SW8/170RTF, high vacuum system, granulation of Previero, Siemens control with touch screen, Capacity 600 – 1,000 kg/h; usual power was 800 kg/h, Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827 V

SCHMALTZ RGK 1100/6000 Crankshaft Grinding Machine Technical Details : Max.Workpiece Length :8000 mm Grinding Diameter: 1100 mm Grinding Wheel Diameter:1300 mm Grinding Motor : 25 PS Crankshaft Radius Max: 300 mm Cr8zr7tiq2 Workpiece Weight:2500 Kg Clamping Diameter: 100-250 mm Rotation Speed : 400 to 500 U/Min Workpiece Speed:10-14-20 U/min Slide Speed: 50 to 600 mm/min

Refrigeration equipment. Brand: Ferroli, model: RGA IR200.2VB AB OM5. J020, frigories: 198.000, power: 71.6 Kw, Amp: 170, gas: R410A.

sheet width: 2500 mm plate thickness: 2,5 mm distance between columns: 2550 mm cutting angle: 1,5 ° cutting strokes max.: 35 p.Min. back stop - adjustable: 500 mm total power requirement: 3 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 2,9 x 1,4 x 1,16 m foot operated switch: : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DH Robotics RGI-14 Rotary Gripper Gripping force (per jaw): 10~35 N Stroke (both sides): 14 mm Rotation torque: 0.25 N.m Rotation range: Infinite Mechanical specifications Maximum speed of rotation: 1500 deg/s Repeatability of rotation: ± 0.02 deg Backlash of rotation: ± 1 deg Position repeatability (gripping): ± 0.02 mm Opening/closing time: 0.2 s/0.2 s Weight: 1.1kg  Electrical specifications Communication interface: Modbus RTU(RS 485), Digital I/O Nominal voltage: 24 V DC ± 10% Nominal current: 1.1 A Peak current: 2 A Ingress protection rating: IP 20 Recommended operating environment : 0~40°C,

DH Robotics RGI-30 Rotary Gripper Gripping force (per jaw): 10~35 N Stroke (both sides): 14 mm Rotation torque: 0.25 N.m Rotation range: Infinite Mechanical specifications Maximum speed of rotation: 1500 deg/s Repeatability of rotation: ± 0.02 deg Backlash of rotation: ± 1 deg Position repeatability (gripping): ± 0.02 mm Opening/closing time: 0.2 s/0.2 s Weight: 1.2 kg  Electrical specifications Communication interface: Modbus RTU(RS 485), Digital I/O Nominal voltage: 24 V DC ± 10% Nominal current: 1.1 A Peak current: 2 A Ingress protection rating: IP 20 Recommended operating environment : 0~40°C,

Number Of Colours: 2 // Maximum Diameter: 35 mm

Multiple limit switches, buttons, limit switches -250 V 10 A -Price: per piece -Number: 20x available -Weight: 1 kg

Differential pressure indicator, transmitter, monitor, senso, differential pressure indicator, differential pressure switch, pressure switch, volumetric flow controller, differential pressure controller, pressure reducing valve -Manufacturer: Samson, differential pressure regulator 2-6 bar -Type: 2440 Rg5 1/2 PN25 -Control valve: Samson Rg5 -Number: 2x controller available -Price per piece -Dimensions: 270/95/H90 mm -Weight: 1.2 kg/pc.

Plastic granulation line with a capacity of approximately 500 to 600 kg/h Erema rga 120 1. extruder motor - 110 kW, - controlled by an inverter 2. kW thickener engine - 90 kW, 3. screw diameter 120 mm The machine has been completely refurbished (the costs of rebuilding the machine are approximately PLN 100,000). Additionally, the following equipment was purchased for the construction of the entire line: 4. Self-cleaning filter 2x400 mm. - new 5. Thread head - new 6.Extruder 150 mm. - new 7.Granulator for cutting threads - new. 8. Sieve - new 9. Koltex dryer with feeder - new. 10.Big bag station. The price in the advertisement is for the extruder only.

Scledum - Berco Crankshaft Grinder RG270 Kurbelwellen Schleifmaschine Ruaro-Scledum RG 270 Crankshaft Grinder Model RG 270 Wheel dimensions Ø x bore x width (mm) Ø 710 hight of the centers 270mm Ø over the bed (mm) 540 Distance between-centers (mm) 1750 Radius height above table 270mm Maximum distance between 1750mm chucks 25-45-70 piece rotation speed rpm Grinding Wheel Head Travel 140mm Grinding Wheel Head Micrometric Travel 170mm Grinding Wheell max. Thickness 70mm Max. Diameter on the steady rests 160mm Grinding Wheel Motor Power 5.6KW Wheight aprox 5400kg Transport dimension approx.540x170x170 Maximum weight Work Piece 250 kg with support Self centering Chuks Left - Right 2x Steady Engines spindel and counter spindles are lifted with air for better movement when assembling crankshafts Table longitudinal movement is hydraulic Splash guards included Hydrauli ...

1.Pipe belt conveyor RGFO 1200/900 x 37000 version with foldable upper half, clamping station manual, drive approx. 11 kW, with scraper, 2 level monitors, Hopper and transfer hopper built in 2011 2. Vibrating screen 3 levels / 3 sqm, motor 3 kW 3. Screw conveyor 3 x 500 mm, motors 3 x 7.5 kW

- Fully automatic water bottling line, from blowing to shrink/unit pack formation, and palletizing. (Bottle preform in - at the end the finished pallet is foiled out - this is how it works simplified) Currently: 2 liter PET, carbonated and still mineral water. (Possible upgrade to 0.5, 1.5 liter etc.) In the case of a 2-liter product: nominal capacity 8,500 bottles/hour (Productivity is proportionally higher in the case of a smaller volume) The power of the machine line can be further increased (the machine with the lowest power determines the maximum power of the line) - nominal capacity 8,500 b/h / 2L (b/h = bottle/hour) - compressor: Kaeser G1400 40 Bar - blower: Siedel SB016 No109: 17,500 b/h - air conveyor: Laffranchi - conveyor and buffer track - filling machine: Sarcmi RG8 202 1510/84 Selenia 70/8 02.076: 12,000 b/h - labeller: Sacmi Opera Ser.no: 10116262: 22,000  ...

Used Filling Monoblock Galdi Up to 6000 BPH Introduction to Advanced Bottling Technology Initially the Galdi RG260A a high performance filling monoblock from 2010 stands as a cornerstone of modern bottling operations Having been recently overhauled it showcases unmatched efficiency and reliability Consequently achieving speeds of up to 6 000 bottles per hour this machine sets a benchmark in the industry Specifically it is engineered for Pure Pak Daimond Standard Curve B style T Bottom containers Moreover it utilizes 36mm Elocap caps demonstrating its versatility and adaptability to various packaging needs Ensuring Uncompromised Product Safety of the Filling monoblock Galdi Importantly one of the critical aspects of the Galdi RG260A is its disinfection killing rate With up to LOG5 it guarantees the highest levels of product safety This capability is especially crucial in today s market wh ...

sheet width: 3100 mm plate thickness: 4 mm cutting angle: 1° 30` ° back stop - adjustable: 750 mm weight of the machine ca.: 3800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 80 mm

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA RGA 80 TE, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are exchanged for original EREMA spare parts. The machine is designed for a throughput of up to 250-300kg per hour and is suitable for PP. If you are interested in this machine, please do not hesitate to contact us!

: gebraucht : 2004 : 9726 : prompt, Zwischenverkauf v : Türkei : 5900 € : 1350 mm : 3 mm : 35 1/min : 1,5 ° : 550 mm : 3 kW : 2 Stk. : 850 mm : 400 mm : 1700 mm : 1350 mm : 1200 mm : 950 kg manualback gauge automatic sheet hold down hold down with rubber pads moveable foot switch side support arm 2 supporting arms user manual in GERMAN does not complie with the German UVV and Austrian AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

oven 700 Uterna Europe 80KW 700 Celsius Ziel des Spannungsarmglühens schoenheider ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeumwandlungen, Kaltverformung und durch spanende Bearbeitung. Wichtig für ein gutes Ergebnis ist nicht nur die richtige buerstlein Temperatur, sondern auch eine umsichtige Abkühlung. Nur so lässt sich eine erneute Spannungsbildung vermeiden. Typischerweise findet das Spannungsarmglühen bei Temperaturen um 600 °C (bei zuvor vergüteten Bauteilen jedoch 30-50 °C unter der letzten Anlasstemperatur) statt. Die Wärmebehandlung ist das häufigste Veredelungsverfahren, mit dem die Eigenschaften der Stähle gezielt verändert und ihre optimalen Gebrauchseigenschaften für den jeweiligen Einsatzzweck herbeigeführt werden. Erst durch eine der Stahlzusammensetzung, dem Verwendungszweck und der Baut ...

; Mileage [km]: 6; Power [PS]: 265

; Mileage [km]: 6; Power [PS]: 214

System: Used Westfalia Separator as semi-mobile dewatering unit Manufacturer: Westfalia Model: full coat screw centrifuge Design: as a semi-mobile dewatering unit Type: UCF 646-00-35 Power: 110 kW Screw drive: 30 kW, IP54, 50 Hz -Accessories: inlet pipe for the feeding of sludge -Decanter connectors: solids discharge chute 1.4301, Central chute, including sample tap 1.4301 -Sludge feeding: rotary piston pump Börger CL520 Flow rate: 50-120 m3/h Power: 11 kW -Mud meter: ABB, COPA XE, DN 100 -Solvents - and dosing station: fully automatically to the release of liquid products Designed for a dose of: 35 kg FHM/h Make: P + P -Eccentric screw pump: to promote the use solution over the subsequent dilution station to the decanter Make: Netzsch, 2-8 m3/h Power: 1.5 kW FU: included in the control -After dilution station: to the Hrabsetzung of the root solution to power consump ...

-System: Used Westfalia Separator as semi-mobile dewatering unit Manufacturer: Westfalia Model: full coat screw centrifuge Design: as a semi-mobile dewatering unit Type: CF 7000 / UCF 646-00-35 Power: 110 kW Year of construction: 2012 Screw drive: 30 kW, IP54, 50 Hz -Accessories: inlet pipe for the feeding of sludge -Decanter connectors: solids discharge chute 1.4301, Central chute, including sample tap 1.4301 -Sludge feeding: rotary piston pump Börger CL520 Flow rate: 50-120 m3/h Power: 11 kW -Mud meter: ABB, COPA XE, DN 100 -Solvents - and dosing station: fully automatically to the release of liquid products Designed for a dose of: 35 kg FHM/h Make: P + P -Eccentric screw pump: to promote the use solution over the subsequent dilution station to the decanter Make: Netzsch, 2-8 m3/h Power: 1.5 kW FU: included in the control -After dilution station: to the Hrabsetzun ...

OSTAS PLATE SHEAR TYPE RGM 1050 x 6 -Capaciteit 1050 x 6 mm -Achteraanslag electric -Voetbediening -Remmotor -Plaathouders -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

STRATASYS OBJET30 PRIME V3 3D PRINTING (year 2015) 3D printing of medical implements that require prolonged contact with the skin, such as headsets or surgical guides. Prototypes of joints, connections and sealants. The Objet30 Prime printer offers 12 different materials so you can create accurate prototypes of consumer products with smooth surfaces and flexible components from your desktop. Printing time: 1102 Specifications: layer thickness 28 microns for Tango materials; 16 microns for all other materials Precision 0.1 mm could vary depending on part geometry, size, orientation, material, and post-processing method model materials Biocompatible (MED610) Material for high temperature (RGD525) Rigid and opaque white material (VeroWhitePlus) Rigid and opaque blue material (VeroBlue) Rigid and opaque black material (VeroBlack) Rigid and opaque gray material (VeroGray) ...

-Air conditioning from BS-40 -Exhaust fan to the correction of the fermenting Cabinet climate -Turret cutting head with pneumatic connection and Capacity for maximum 4 tools -Kaiserstüpfler with pneumatically driven, adjustable flour Shaker -Hanger drying -Ablegevorrichtung for Gärgutträter of the 3 euro sizes 400 Ã? 600 mm, 580 Ã? 780 mm, 580 Ã? 980 mm, maximum stripping length 1,000 mm -Insertion opportunity for proofing trays (standard links) -Fermentation freight carrier recording as a slot loading -Bypass belt pneumatic single - and extendible -Disinfection station -Screen control via touch screen -Operating side in direction of travel links

La San Marco NEW 105 MULTIBOILER 3G portafilter machine espresso machine Touch (6) factory price 11,157 ,- € The NEW 105 Multiboiler series uses the latest technology from La San Marco. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature setting, which can be easily adjusted via the touch screen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display provides a range of information that is of great benefit to the operator. The illumination of the workplace with adjustable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Groups: 3  ...

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

Sludge feed pump rotary piston pump PL100 Börger Product no.: RE-HU-2019-0701-PK32 System: rotary piston pump sludge feed pump Manufacturer: Börger Type: Pl 100 Speed: 50-700 rpm Flow rate: 2.5 to 38 m3/h Pressure: 12 bar

Capacity 1.5 - 2 t / h Full color RGB CCD cameras Self-learning function automatic re-sorting Slides: 6 (1-2 slides can be used for re-sorting) contactless ejectors The display languages for controlling the system are Russian and English Dedusting system LED lighting complete facility

HEXAGON OPTIV CLASSIC 321 GL tp optic measuring machine was built in 2009 in Switzerland. This technologically advanced machine is the best solution for highly accurate measurement and inspection of e.g. electronic parts, micro-hole dies, fibre optics and inkjet nozzles. Thanks to the use of an 8-segment LED ring light with RGB colour sensitivity adjustment, the HEXAGON vision measuring machine detects and captures the edges of coloured parts much more easily compared to standard greyscale or lighting modifications. The offered machine also features, among other things, a 3 axes microprocessor CNC with vector path control, a CCD camera with 6.5x zoom and PC-DMIS Vision metrology software with the innovative MultiCapture function, which finds all 2D characteristics in the field of view simultaneously, increasing the inspection speed by up to 50%. The total weight of the machine is 170 kg. ...

Stock - No.: 2166 1 used, in 2019 partly overhauled and tested film/foil/regrind pelletizing extrusion line EREMA type RGA 50 T equipped with: 1. cutter / densifier unit, new motor with 18,5 kW tangential ( T ) cutter - Ø 550 mm 2. Extruder single-screw Ø 50 mm – 20 LD motor 18,5 kW – NEW Frequency Converter 3. screen pack changer sieve- Ø90 mm with hydraulic unit-new 4. watering-granulation unit HG, pelletizer drive 0,75 kW 5. pellet drying vibrating dewatering unit GS 1000/200 6. control board ( new converter ) The line is ready for operation, date shortly in our workhsop Wuppertal-Germany. More regranulation-pelletizing lines ex stock available, ask for our actual machine-list or visit us

oven 1150 inner chamber dimensions 1 x 1 x 2m t max 1150 Celsius PLC Öfen Verzinkungsofen Ve rgüteofen Anlassofen Industrieöfen Glühofen Ovens laboratory ovens industrial furnaces industrial furnace plants Industrial Furnaces high-temperature chamber furnaces hardening furnace anlageHärteöfen Annealing furnaces Conveyor belt Abg aswäscher Abkühlungsöfen Abwärmerückgewinnung Aluminiumgiessereimaschinen Anlassofen Brennöfen Dentalofen Durchlauföfen Emaillierofen Fusingöfen Generatives Fertigungsverfahren Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium – Glühöfen Abschreckbäder Beschickungsanlagen für sbguss Druckgußmasch inen Drehherdöfen Doppelkammeröfen Draht – Glühöfen Durchlauföfen Elev atoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herdöfen Hubbalkenöfen Herwagenöfen Haubenöfen Indust ...

oven 650 inner 1x1x1.2m (possible various size) t max 650 PLC Tiefofen zum Homogenisieren von Walzbarren Wärmezubehandelnde Barren werden auf einer Stirnseite stehend mittels Krananlage und Zangeneinrichtung in den Ofen eingesetzt. Die Erwärmung der Barren wird bei mehrreihigem Einsatz durch Hochkonvektion mit entsprechend angeordneten Düsen und Düsenkanälen gleichmäßig erwärmt. Nach Ablauf der Homogenisierungszeit wird die Barrentemperatur auf Walztemperatur abgesenkt und die Barren stehen für die einzelne Abnahme im Walz-Takt zur Verfügung. Die Öfen können direkt und indirekt Gas oder elektrisch beheizt ausgeführt werden. Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Ofenanlagen zum Glühen von Aluminium Die Bandbunde werden mit Ihrer Achse horizontal in den Ofen eingelegt. Die Aufnahme er ...

furnace 1200 1x1x2m t max 1200 Celsius plc auto door various size possible Industrieöfen- Fertigung und Reparatur jeglicher Art Wartung und Einregulierung von Industriebrennern Industrieöfen für Öl, Gas oder elektrisch beheizt Umfangreichen Sortiments an Feuerfeststeinen, Feuerfestmassen, Isoliermaterialen und Gießereihilfsstoffe namhafter Hersteller. Renovierungen und Instandsetzungen von Ofenanlagen Brenner einstellungen von Ofenanlagen Modernisierungen von Ofensteuerungen Umrüstu ng von elektrischen Öfen auf gasbeheizte Öfen Umrüstung alter Heizsysteme auf Rekuperation Öfen Verzinkungsofen Ve rgüteofen Anlassofen Industrieöfen Glühofen Ovens laboratory ovens industrial furnaces industrial furnace plants Industrial Furnaces high-temperature chamber furnaces hardening furnace anlageHärteöfen Annealing furnaces Conveyor belt Abg aswäscher Abkühlungs ...

1 Loos steam boiler Type AW1-1 No. 53658/1 Capacity 10 to steam with 20 bar Up to 235 °C, 385 kW Year of construction 1991 With Weißhaupt burner machine with EL heating oil and gas firing Type RGL 70/1 A, Catergorie J Fabr. No. 3626804 Year of construction 1991 1 Loos steam boiler Type AW1-1 No. 53658/1 Power 10 to steam with 20 bar Up to 235°C, 385 kW Year of construction 1991 With white head burner machine with EL heating oil and gas firing Type RGL 70/1 A, category J No. 3626804 Year of construction 1991

mobile heating system, central heating system, steam heating, land steam boiler system used STEAG / GVT Saarbrücken Boiler capacity: Steam 5 t/h Boiler manufacturer: BABCOCK / OMNICAL Boiler type: OMNIMAT Temp. max 190°C Pressure max 13 bar Boiler capacity 6080 l OIL / Gas Burner WALKER RGL50/2-A YOC:2004 5400 kW Gas type N Heat and soundproofed container 11 x 3.6 x 3.9 m Transport weight: approx. 30 t Operating weight approx. 44 t Electrical power requirement 25 kW The plant has not been in operation since 04.2020 and has been preserved dry.

Fully automated sand-lime brick factory. 50,000 tonnes/year. Modernised in 1986, 2000 & 2019. The current plant meets today's high safety standards and has been continuously modernised and modified. The residual steam is reused for heating company buildings. Packaging installation: fully automatic The entire installation is fully automated, with the exception of the manual opening and closing of the autoclave doors. 2x Atlas Krupp Polysius presses (1 with new Bosch Rexroth hydraulic system and controls) Forming boxes for different stone formats Conveyors and silos Primary crusher Gyradisc 36 Jg. 1980 Fine crusher SBM V8 machine nr.12041/2X Vibrating screen GFA sieve 0-3mm Mixer machine factory Gustav Eirich, type DE 22 Machine no. 23104, built in 1984, with vortex device capacity 1500 lt/ 2400 kg Eirich mixer, with agitator 1.5 m or 2.5 t 2 x reactors Namur mixer, with w ...

Nitrogen Furnace nitrogen furnace Pit furnace, top condition. 50kW ele Max T. 950°C Anealing in hydrogen, nitrogen atmospere Batch size 800x1000mm run only for tests and start of production similar possible furnace REY, Naberther, CFI, SAIREM, SOLO, ALD, ECM, BMI, CERIC WISTRA, ELTI, ECM, NAGAT SAT, SAFED, SERTHEL, SLFI, MORGAN, OTTO JUNKER, CIEFFE Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium – Glühöfen Abschreckbäder Beschickungsanlagen für Druckgußmasch inen Drehherdöfen Doppelkammeröfen Draht – Glühöfen Durchlauföfen Elev atoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herdöfen Hubbalkenöfen Herwagenöfen Haubenöfen Industrie Trockenanlagen Kammeröfen Kunststoff - Beschichtungsöfen Carbonitrieren Härten Vergüten Härten von Kaltarbeitsstahl Härten von Warmarbeitsstahl Induktivhärten Flammh ...

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...