127,258 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
3x RFID Tunnel, Sick, ideal for recording contents and quantity, e.g. in cartons – used - Price per piece ex location (net): 13.950.-€! Manufacturer: Sick Year of Make: 2016 Type: TTS080-B6M01X000MXX0FK00 P/N: 1 123 631 S/N: 2146 2762 and 2145 2783, third serial number to be entered Tunnel width: outside approx. 74cm / inside approx. 56cm Tunnel length: approx. 1.37m Belt Conveyors: Strap width: approx. 49cm Element width: approx. 52cm Element length: approx. 5.10m Condition: good Available: immediately Location: Unna Gain insight into boxes and check contents and quantity without having to break open packages. Since verifying the shipment is crucial to ensure customer satisfaction, ensure that your customer receives exactly what they ordered with an RFID tunnel system. This system ensures that the ordered goods are delivered to minimize expensive returns. ...
2x RFID Tunnel, Sick, ideal for recording content and quantity, e.g. in cartons - used - Price per piece ex location (net): 19.950.-€! Manufacturer: Sick Year of Make: 2022 Model No.: MSC800-1100 Type: TTS040-B6M00X000MXX0FK00 P/N: 1 040 385 S/N: 2230 3260, second serial number to be entered Tunnel width: outside approx. 1.10m Tunnel length: approx. 1.37m Belt Conveyors: Strap width: approx. 45cm Max. object width: 400mm Max. belt speed: 1m/s Element width: approx. 50cm Element length: approx. 3.50m Former new price 40.000.-€ / piece Condition: good Available: immediately Location: Unna Gain insight into boxes and check contents and quantity without having to break open packages. Since verifying the shipment is crucial to ensure customer satisfaction, ensure that your customer receives exactly what they ordered with an RFID tunnel system. This system ens ...
RFID Tunnel, Sick, belt width 83cm, ideal for recording contents and quantities, e.g. in cartons – used - Price per piece ex location (net): 9.950.-€! Manufacturer: Sick Year of manufacture: unknown, can be clarified, probably 2016 Model: must be submitted later Type: must be submitted later P/N: must be submitted later S/N: must be submitted later Tunnel width: outside approx. 1.10m Tunnel length: must be submitted later Belt conveyor: Strap width: approx. 83cm Width of the entire conveyor belt element: approx. 88cm Element length: approx. 4m Condition: good Available: immediately Location: Unna Gain insight into boxes and check contents and quantity without having to break open packages. Since verifying the shipment is crucial to ensure customer satisfaction, ensure that your customer receives exactly what they ordered with an RFID tunnel system. This syste ...
9x PCS Intus 5600 Time Attendance Terminal RFID. Due to a change of provider, we have 9 PCS time and attendance terminals for sale. These were operated by us via RFID Myfare access chips. Very robust and intuitive devices.Further information can be obtained on the homepage of PCS. New price was 2200€ net / piece. The price refers to 1 terminal. If several devices are purchased, a package price can of course be negotiated. Very good condition, fully functional. Insured shipping possible. Net unit price. For traders, an invoice with VAT will be issued.
UHF RFID-reader, 24V DC, DTE800, IFM Electronic, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.
Return filter HYDAC RFP 160 G20 C Pmax 30 bar 0.9 l New ! Dimensions: 130 x 120 x 230 mm
Return filter unit, surface-mounted return filter HYDAC RFDBN/HC161G10D1.1 VR2 - D.0L24 25 bar switchable, with 2 pressure switches ! Dimensions: 335 x 320 x 220 mm
Screw pump with motor, hydraulic pump SETTIMA GR 40-SMT16B 125LAC28 RF2 ( GR40-SMT16B125LAC28RF2 ) motor: 2.2 kW 1420 rpm 230 / 400 V Dimension: 800 x 250 x 300 mm
Test pin set (test measurement set) according to DIN 2269 for fine tuning and checking measuring equipment or for comparative measurement. The set is 7 pieces and covers the range 23.09 to 23.15 mm. Delivered in the original wooden box. Condition: Very good optical condition. Test pins clean, without any noticeable damage. Wooden box with slight signs of wear. Scope of delivery: • 7 test pins according to the above list • Original wooden box • Standard: DIN 2269 • Design: Test pins / gauge block-like test specimens • Quantity: 7 pieces • Nominal dimensions: 23.09 / 23.10 / 23.11 / 23.12 / 23.13 / ...
Rosink RFL Front Loader - Powerful water-based cleansing -Modular - Cleaning of tall and long components - Easy operation, compact design - Low-maintenance operation - Basic system in stainless steel design -Environmentally friendly Conception With the Rosink RFL front loader, we offer you an economical and user-friendly solution - particularly suitable for cleaning tall components. The proven Rosink cleaning technology and the highest quality are thus combined in one system. The basis is a 1-bath system, standard with a turntable, which can be expanded to a multi-bath system on request. Depending on the equipment and needs, different programs can be run inside the washing chamber, such as washing, rinsing, drying, etc. Equipment Basic system in stainless steel version 1.4301 Tank with sloping floor Tanks and washing chamber incl. cladding and insulation Slewi ...
10842025 Isobaric Filling Block Framax Modulblock RFCI for Glass Bottles The Framax Isobaric Modulblock RFCI 16/16/1 DPS/C Filler Block is suitable for bottling a wide range of carbonated products, including beer, kombucha, carbonated water, soft drinks, other sparkling beverages and still drinks. This filler block has been filling beer in 300ml and 500ml glass bottles with crown cap. Filling capacity is 2000 – 3000 depending on product, operation parameters are easily set up from HMI touch screen and controlled with Siemens PLC. Machine has been maintained regularly according to manufacture’s instructions and is in vey good condition. The bottling machine consists of: • A 16 clamp rotating rinser, featuring a single hot water sanitation cycle, • A 16 valve isobaric counterpressure filler with double air pre-evacuation using CO₂, • A single head crowner (crowning u ...
Key data: 100 mm, 3000 mm
Radial drilling machine CSEPEL RFH-100 / 3000 – technically flawless Description: For sale is a used radial drilling machine / column drilling machine / column drilling machine from the manufacturer CSEPEL, type RFH-100 / 3000. The machine is technically flawless and ready for use in the workshop or production. It is ideal for drilling work on medium to large workpieces. Technical data: Manufacturer: CSEPEL Type: RFH-100 / 3000 Drilling capacity: 100 mm Projection: approx. 3,000 mm Speed range: 18 – 1,800 rpm Spindle holder: MK6 Spindle stroke: approx. 400 mm Feed rate: 0.0375 – 2.0 mm/rev Connected load: 15 kW / 380 V Dimensions (L × W × H): approx. 4,400 × 1,600 × 4,200 mm Condition: technically perfect Changes and errors in the technical data, specifications and prices as well as prior sale reserved.
Radial drill, Csepel RFM 51, used machine Manufacturer: Csepel Model: RFM 51 X-axis length: 4000 mm Arm travel: 3100 mm Radius: 2460 mm Distance from base to spindle: 1660 mm Drilling capacity in steel: 100 mm Drilling capacity in cast iron: 120 mm
Siemens Simatic Portal Reader Wide Range Power Supply - 4 x Siemens Simatic RF660A - 1 x Siemens Simatic RF660A Portal Reader - 1 x ES 001 Wide Range Power Supply - 2 x Simatic RF680R - 1 x Siemens Wide Range Power Supply - 1 x Simatic RF 660R Portal Reader - 1 x Simatic RF 680A - 1 x Simatic RF 620A
Beer bottling line, Framax 9-8-1 filler, pressure filler, double pre-evacuation, module block RFCI 09-08-1 DPS-C, year of construction: 2014, set up for 330ml bottles, with labeling machine, self-adhesive labels Beer Bottling line, Made by: Framax 9-8-1 Filler, Counter pressure filler, isobaric, double pre-evacuation, Modulblock RFCI 09-08-1 DPS-C, Year: 2014, adjusted to 330ml, 33cl, 0,33l glass bottles, Labeller Labelling machine, self adhesive labels
This 3-axis Roders RFM 760 vertical machining centre was manufactured in 2005. It features a spindle speed range of 3,000 to 42,000 rpm and travel paths of 760 mm in X, 550 mm in Y, and 300 mm in Z. Equipped with Röders RMS 6 V3.6 control, it offers precise machining capabilities. If you are looking to get high-quality milling capabilities, consider the Roders RFM 760 machine we have for sale. Contact us for further details regarding this machine.
gear motor, electric motor, servo gear motor -Manufacturer: SEW-Eurodrive, servo gear motor type RF27 CMP63M/KY/AKOH/SM1 -Gearbox:Type RF27 455 rpm i 6.59 -Motor: Type CMP63M/KY/AKOH/SM1 -Power: 3.30 Nm -Speed: 0 - 3000 rpm -Shaft: Ø 25 x 50 mm -Dimensions: 465/140/H170 mm -Weight: 10.5 kg
Description Twelve-pocket folding machine Heidelberg Stahlfolder TH 82-8-4-RFH with SAK 78 from 2006 Round pile feeder RFH 82 with suction belt system ACC 2.4 Control unit for window rebate or cold-glue device MCT control Folding unit 1 BUH 82-8 with upstream knife shaft, 8 pockets 82 cm, Double downstream knife shaft with lift kit Folding unit 2 BUH 82-4 with upstream knife shaft, 4 pockets, 82 cm, downstream knife shaft with lift kit
Key data: 600 mm, 450 mm, 300 mm
Röders 3-Axis High-Speed Machining Center 3-Axis High-Speed CNC Machining Center A proven performer in industrial milling, this 1999 Röders RFM 600/2 delivers reliable 3-axis high-speed cutting designed for precision tooling and mold making. Technical Details 1. Machine identification data Name: High-Speed Machining Center Manufacturer: Röders Model: RFM 600/2 Year of manufacture: 1999 Machine number: 88194-80 2. Operational parameters Travel (X / Y / Z): 600 / 450 / 300 mm Table size: 700 x 550 mm Max. table load: 800 kg Spindle speed: 42,000 rpm Spindle motor power: 14 kW Feed rate: 0 – 30,000 mm/min Rapid traverse: 30 m/min Tool changer: 18-position Operating hours: approx. 108,888 h Spindle hours: approx. 18,625 h Control: Röders RMS6 Connections (Electrical): 400 V; 20 kVA 3. Weights Total machine weight: approx. 52 ...
This 3-axis Rambaudi RF103 was manufactured in 2008. It features a maximum spindle speed of 18,000 rpm and a robust table size of 1,900 x 1,200 mm. The machine includes a tool changer with 24 positions, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the Rambaudi RF103 vertical machining centre we have for sale. Contact us for further details.
79210 Mauzé, France Year of construction: 1996 Type: PV35.Z N691.E6280312 Transmission: SEW USOCOME Type: RF72LP 132S / M Hagenau France n1 = 1400 min-1, n2 = 275 min-1 Engine: Constructions Electrique Nancy Power: 5.5 kW Type: R-132 S-4 No.: 674975 n = 1420 RPM Protection class: Exx
1x Romfil Crossflow filter, RF12 CSA Vario, built in 2009, 12 new modules and completely overhauled, 120 sqm filter area, capacity for wine up to 15,000 ltr./h under optimal conditions, all seals + air lines + water filter + air filter new, operation via touch panel, integrated feed pump The filter filters fully automatically and also flushes back fully automatically during filtration (time and duration can be set). Furthermore, it also does a water flush fully automatically when a preset minimum quantity falls below a preset level. This means that even a large quantity can be filtered fully automatically – without anyone having to be present. The user only has to add the cleaning agents manually during dry cleaning, there is no automated dosage. The cleaning itself then runs automatically again. In addition to smaller extras, the filter also has a slow-running impeller pump i ...
HEIDELBERG Stahlfolder RFH 66/4 BCUH of 2007 16 pages combined. International - English & German fold A folding machine of 66 cm, config; -1St unit 4 x. Pockets, round pile feeder + 3 x. Knives KTL = 16 pages - int. English or German folds > > Option: VF-66 2006 - Mobile knife / total fold 32 pages < < Delivery St. Unit TSH 70 presser stacker Condition; VERY GOOD condition, immediately available, Can be lakes in our factory at Strasbourg FR
Scanvaegt model: RF5 checkweigher serial: BMP01014 2009, stainless frame, weight range 600g - 5000g, up to 40 packs per min, max product 300mm x 220mm, total length 800mm
Code 111263 Description Radial drilling machine Make CSEPEL Model RFH 100 / 3000 Serial No. 73089 Year of make 1975 Drilling Cap. in St. 60 / cast iron 100 / 120 mm Spindle taper 6 MK Spindle radius 3500 mm Min/max height spindle / top of base plate 440 – 2100 mm Arm traverse 1260 mm Spindle traverse 400 mm Number of speeds 21 steps Speed range 18 – 1800 rpm Feed range 18 0,0375 – 2,0 mm/rev. Working surface bed plate 3160 x 1550 mm Motor 15 kW – 380 Volts Total power 20 kVA Dimension 4390 x 1550 x 4130 mm (L x W x H) Weight of machine 14.000 kg Accessoiries Box 1000 x 1000 x 500 mm Automatic Clamping Cooling Condition Machine is in good condition
Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines. Machine is new, never used.
Gear motor, electric motor -SEW-Eurodrive: gear motor type RF60DT90S4B -Speed: 72 rpm -Power: 1.1 kW -Construction: B5 -Brake: 10 Nm -Diameter shaft: Ø 30 x 60 mm -Protection class: IP 44 -Dimensions: 620/280 / H215 mm -Weight: 41 kg
Key data: 1 , 95
Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF57 DT90L4 Ilość w magazynie: 2 Obroty r/min : 1410/95 Przekładnia: 15 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.
Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF57 DT90L4 Ilość w magazynie: 4 Obroty r/min : 1410/25 Przekładnia: 56 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.
Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF67 DT90L4 Ilość w magazynie: 3 Obroty r/min : 1410/79 Przekładnia: 18 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.
Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF67 DT90L4 Ilość w magazynie: 2 Obroty r/min : 1410/60 Przekładnia: 24 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.
Spur Gear Motor / Motor Manufacturer: SEW Type: RF57 DT90L4 Quantity in stock: 2 Turnover y/min : 1410/95 Transmission: 15 Power (kW): 1.5 Product ID: 1
Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF67 DT90L4 Ilość w magazynie: 2 Obroty r/min : 1410/35 Przekładnia: 40 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.
Metronic Romex RFD 2000/4 Type: Stack Material: 20-250my all common materials printable Inking units: 4 Printing ink: Fuel or watercolor Cylinder circumference: from 250mm- 510 mm Cliché thickness: 2.84mm /1.14mm Inking units with doctor blade chambers Material width: 520 Print width: 520 Winder: pneumatic unwinding Dryer: Hot air Side edge controls: 2x BST Railway observation: BST Inline Corona 4,5KW SOFTAL Explosion protection
Inv. Num. : 7256 Type: RFM 600/2 Producer: Röders TEC Created: 2000 Parameters: Work table length: 700 mm Work table width: 550 mm X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 300 mm
Width 82 cm Year of construction: 2005 Round stack feeder RFH-82 1st station: 6 folded pockets 82 cm automatic folding pocket adjustment automatic folding roller adjustment upstream knife shaft downstream knife shaft 2nd station: 4 folded pockets 66 cm automatic folding pocket adjustment automatic folding roller adjustment upstream knife shaft downstream knife shaft 3rd station: 2 fold pockets 56 cm automatic folding pocket adjustment automatic folding roller adjustment downstream knife shaft Standing sheet delivery SBP 66 Delivery date: immediately from stock Price on request. We deliver and install worldwide!
Used helical gear motor/motor for renovation. Manufacturer: SEW-USOCOME Type: RF57 DT90L4 Number: 4 RPM speed: 1410/25 Gear: 56 Power (kW): 1.5 In addition, we have other helical and bevel gear motors in stock. We invite you to cooperate.
Used helical gear motor / motor for refurbishment. Manufacturer: SEW-USOCOME Type: RF77 DT90L4 Quantity in stock: 2 RPM: 1380/9.5 Gear: 145 Power (kW): 0.75 In addition, we have other helical and bevel gear motors in stock. We invite you to cooperate.
Width 78 cm Year of construction 2006 Round Stack Feeder RFH-82 Upstream knife shaft 6 fold pockets in the parallel fold section Automatic folding pocket adjustment Automatic folding roller adjustment Downstream knife shaft 2 folding swords in the crossfold section 1 more fold pocket after the 1st cross break Noise Insulation Hood without display partially overhauled (new folding rollers) Machine condition: cleaned and checked Price on request. We deliver and install worldwide!
Roller shutter insertion milling device TYPE RFG ------------------------------------- Manufacturer description: with mounted hand router efficient milling of the roller shutter insertion on the roller shutter guide strips with cutter 1800 watts 18,000 rpm. ------------------------------------- (Technical information according to the manufacturer - no guarantee! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Radial Drilling Machine SCHLUMBERGER RF6 Spindle: SA40- with tools clamp Spindle exit: 300 mm Spindle speed: from 35 to 1800 RPM Table size: 1000 x 700 mm Year of construction: 1979 Column slide travel: 700 mm Maxi distance spindle nose/table: 850 mm (en high position) Mini distance spindle nose/table: 250 mm (en low position) Drilling / tapping function Auto descent Rotation at 360° on column Voltage: 380 V Width: 1300 mm Depth: 2000 mm Total high in low position: 2650 mm Total high in high position: 3000 mm Weight: env. 3 T
Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: RF43 DT90S4/TH i=19.15 -Speed: 73 rpm -Power: 1.1 kW -Design: B5 -Shaft: Ø 25 x 50 mm -Protection class: IP 54 -Dimensions: 500/200/H110 mm -Weight: 25 kg
Geared motor, electric motor, three-phase motor -Speed: 36/144 rpm -Power: 2.2/5.5 kW -Type: RF83WD132ML-8-2BS/HL/TF -Brake -Design: B5 -Shaft diameter: Ø 50 mm -Protection class: IP 44 -Weight: 135 kg
Article: three-phase current motor Manufacturer: Antriebstechnik Bauknecht Type: RFV 22/4-75P e.g. to use as spindle motor for Schutte multispindle automatic lathe SF51Dnt Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
The Röders RFM 1000/2 is a high-precision vertical machining center designed for intricate milling tasks. Below are its key technical specifications: Travel Distances: X-Axis: 1,000 mm Y-Axis: 800 mm Z-Axis: 600 mm Table Specifications: Dimensions: 1,200 mm x 1,000 mm Maximum Load Capacity: 2,000 kg Spindle Details: Speed Range: 100 to 36,000 rpm Power: 17 kW Sortware update :2019 Find more here - / Contact us at -
rotary table diameter: 1000 mm grinding height: 500 mm grinding head - power requirement: 15/5,5 kW total power requirement: 30 kW weight of the machine ca.: 18 t dimensions of the machine ca.: m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _______________________________________________________ Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx. ...
Width 82 cm Year of manufacture 2005 Computer control with touch screen Round Stack Feeder RFH-82 Extended loading table Double Suction Wheel Automation Kit II Automatic folding pocket adjustment Automatic folding roller adjustment 1st station: 4 fold pockets 82 cm Double downstream knife shaft 2nd station: 4 fold pockets 66 cm Double downstream knife shaft without display Delivery date: immediately Price on request. We supply and install worldwide.
gebr. Radius and bevel grinding machine FISCHER (BARTH) RFM 320 YOC 2007 Oscillation Tischgr. 1,275 x 300 mm 8 radii adjustable: (R2, 3, 4, 5, 6, 8, 10, 12.5) Bevel grinding device up to 16 mm wide Extraction connection: 60 mm Bracket for feeder Socket for feeder pneumatic belt cleaning Chassis Dimensions 130 x 70 cm Weight: 159 kg approx. 30 sandpaper incl. very good used condition Manufacturer
maximum number of results exceeded
please refine your search
100 € 
