Key data: 5 , 310 mm, 250 mm
Four-sided timber planer REX HOMS-310-K with 5 shafts Year of Make: 1978 Working width: 310 mm Working height: 40-310 mm Working height 4-sided: 210 mm (can be increased to 250mm) Number of Spindles: 5 Spindle arrangement: u-o-r-l-u Spindle diameter: 50-50-40-40-40 mm Spindle speed: 5400 rpm Counter bearings: 1-2-5 Motor powers: 7.5-11-5.5-7.5-7.5 kW Working width adjustment: manual Working height adjustment: motorized Feed speed: 5-60 m/min Feed motor: 5.5 kW Feed: Chain Driven rollers in the table: 2 Top feed rollers: 5 Pull-out transport rollers: 4 Horizontal tool head: 2 PCS - D180xH300xd50 Tool head vertical: 2 PCS - D160xH210xd40 Table height constant: approx. 950 mm Chip removal at the bottom: 10 mm Chip removal at the top: 16 mm Right chip removal: 20 Chip removal left: 20 Diameter of the suction nozzles: 200-200-140-140-120 mm Weight: 5500 kg Space ...
REX F-59S Built in 1988 Motor power: 6 / 8 kW (rated current: 16A) Swivel range from -10° to +45° Speeds: 3rd / 4.5 / 6th / 9,000 rpm Milling spindle: 30 + 40 mm Height and swivel adjustment by handwheel Selector switch for left/right rotation Control panel at the top (at eye level) Socket for feed rate Engine brake incl. 2 table extensions Table size: 97.5 x 88 cm Suction nozzle 2 x 120 mm Weight approx. 800 kg Transport dimensions W x D x H (approx. dimensions): W: 110 cm T: 132 cm H: 179 cm
Key data: 510 mm
Rex Trainers Surface planing machine Type A 510/3 Machine No. 18.752 Year of manufacture 1980 Working width 510 mm 2 knife shaft Slit table lips Chip removal 6.5 mm Table length 1550 mm + 1180 mm Stop length 1000 mm, height 140 mm Swivel stop Blade shaft speed 5500 rpm. Motor power 4.0 kW Extraction connection diameter 140 mm Weight with pallet 635 kg Dimensions 2800 mm x 950 mm x H 1000 mm
- completely stainless design, for dry goods filling, - driven by state-of-the-art servo motor, - electronic control , - the vacuum system is equipped with a humidity sensor, - the filling speed is infinitely variable, - can be operated by knee switch - 90 litre hopper, foldable - with removable feed and cleaning auger, - the conveyor is of paddle-wheel design, stainless steel - possibility of connection to a clipping machine for the associated equipment - equipped with standard accessories. - Loading capacity: max. 3.000 kg/hour - integrated computer for control and regulation, - 99 program positions foil stowage, full water protection, - dosing from 1 to 99.999 grams, - automatic fault indication logic, digital display - dimensions: 1156 x 963 x 1775 mm Total power: 2,6 kW Capacity: 0,55kW, 25m3/hour Voltage, freque ...
Performance data: - Filling capacity: max. 3.000 kg/hour - built-in computer for control and regulation, - 99 program positions, full water protection, - dosing from 1 to 99.999 grams, - automatic fault indication logic, digital display Technical data: Power: 2,6 kW Capacity: 0,55kW, 25m3/hour Voltage, frequency: 400V, 50Hz, 3 phase Max. filling pressure: 35 bar Reservoir head, complete - Maximum output 400 ppm - 1-10 turns infinitely variable - synchronous drive for the bowel support - with standard accessories and 3 filling tubes.
Used-refurbished equipment 6100 kg/hour capacity 70 bar filling pressure filling/dispensing/storage Features: Straight filling, dosing, pumping Hydraulic trolley lifter integrated in the machine body Reservoir feed Fully stainless self-supporting frame structure 12" touchscreen with foldable protective cover 14 blade rotor 200 storable programs Clip machine connector Hungarian menu Technical data: Filling capacity: 6 100 kg/hour Filling pressure: 70 bar Vacuum pump: 16 m³/h Funnel size: 250 L Dosing: 5-9 999,9 grams programmable in 0,1 gram increments Speed (max): 1000 doses/min Voltage: 400V 3F/50Hz Power: 25 kW Weight: 1400 kg
Straight filling, dosing, pooling trolley extractor 14 blade rotor fully stainless self-supporting frame construction 12" touch screen with fold-down protective cover 200 storable programs clipping machine connector Hungarian menu Technical data: Filling capacity: 6 000 kg/hour Filling pressure: 40 bar Hopper size: 250 L 250 g capacity 250 g capacity 250 g capacity 250 g capacity 250 g capacity 250 g capacity: 5-9 999,9 g programmable in 0,1 g increments Speed (max): 500 doses/minute Voltage: 400 V, 3F/50-60Hz Power: 8 kW Weight: 700 kg
Features: Straight filling, dispensing, pooling Hydraulic trolley lifter integrated in the machine body Fully stainless self-supporting frame construction 12" touch screen with fold-down protective cover 18 blade rotor 200 storable programs Clip machine connector Hungarian menu Optional ballast with reservoir Technical data: Filling capacity: 6 000 kg/hour Filling pressure: 45 bar Vacuum pump: 16 m³/h Hopper size: 250 L Dosing: 5-9 999,9 grams programmable in 0,1 gram increments Speed (max): 1000 doses/min Voltage: 400V 3F/50Hz Power: 11 kW Weight: 1400 kg
Height 1700 mm Width 650 mm Length 900 mm Capacity 50 l Power supply: 400V 50Hz 3N Total power 4 kW Main Material Stainless steel, acid-resistant Loading No loading, it is possible to buy a pillar loading for the machine Product Administration Method Vane Rotor Stuffer Type Vacuum Stuffer
Key data: 410 mm, 2 St.
Loading table each 1200 mm, 4 Kw, weight approx. 500 kg
The additional prefix of Rex is suitable for filling mixtures of different types It can be attached to the filling machine without much effort The pneumatic cutter cuts off a portion of the required length – from 20 to 40 mm., and it is also possible with other parameters. The parameters are saved in a program and stored in the filling machine. In combination with a Rex tape, you can get an automatic line. It can be used for different types of kebabs made of meat, fish, cheese, dough, granules for soups, rice, etc. After connecting the portioner, only the electronic connection needs to fit into the clip terminal. Technical data Drive type: pneumatic Operating pressure: 4 – 6 bar Caliber of funnels: 20-40 mm. possible others Portion range: up to 480 pcs. / min. Price in euros: 3 600 without VAT
Key data: 8 , 600 , 230
High-performance industrial planing machine In good condition, lots of accessories '
Rex hydro cutter 65 liter Outside of machine made of special stainless steel 65-liter bowl 2 mixing speeds 2 bowl speeds – fast and slow Main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 135 depth: 90 height: 130 Main motor power: 18 kW Voltage: 400 V, 50 Hz Delivery time: 10 working days after advanced payment
Window slot machine REX with trimming saw and slot milling L x W x H: 200 x 150 x 160 cm Weight approx. 750 kg Built in 1976 The machine is in good condition, ready to use. This machine is available from October 2018. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
working width: 630 mm; working height: 280 mm; cutter head: strip knife; number of blades: 4; height adjustment: elektric; read out workpiece thickness: Scala; feed speed: variabel; infeed roller: steel ; outfeed roller: steel; table roller: yes; motor power: 8,8 kW; suction connection: 160mm; machine length: 1200mm; machine width: 1200 mm; weight: 2000kg;
Four-sided planer Working height: 740-750 mm Max working width: 305 mm Min working width: 50 mm Max workpiece height on 2 sides: 310 mm Max workpiece height on 4 sides: 160 mm Min workpiece height: 17 mm Feed speed steplessly adjustable: 10-60 m/min motors: bottom 11 kW, top 11 kW, right 7.5 kW, left 11 kW feed motor: 7.5 kW motor height adjustment: 1.5 kW speed 5,500 rpm driven top and bottom feed rollers
REX wide planer, type SUPERMASTER 10/110-WW, Manufacture year 2009 (left hand version), Machine specifications, - Working width 80 - 1100 mm, - Working height 40 - 300 mm, - Feed speed 6 - 60 m/min, - Electric driven feeding system, 4x 9.2 kW, Spindle layout:, 1. Horizontal spindle bottom, motor 45 kW, 2. Horizontal spindle top, motor 45 kW, 3. Vertical spindle right, motor 25 kW, 4. Vertical spindle left, motor 25 kW, # 4 pc. chamfering device top/botoom and right/left, each 1.85 kW, 5. Vertical spindle right, motor 25 kW, 6. Vertical spindle left, motor 25 kW, - Upper part can be quickly adjusted with 10 lifting columns, - Driven feed rollers in the upper part of the machine, - Driven feed rollers in machine stand, - Vertical spindles with counter bearings, - Heavy duty outfeed unit with 4 rollers, - Feed speed with frequency converter, - Separate electricity trunk with separate contro ...
