128,416 used machines on RESALE, but how to find them? Machine Search
Welding table, straightening table, straightening plate, work table, clamping table straightening plate, leveling table,spotting plate PAGUS work surface: 300 x 300 mm height: 90 mm used, tested ! Dimensions: 300 x 300 x 90 mm
Cardboard boxes 1,200 x 300 x 400 mm and 1,200 x 300 x 200 mm each approx. 150 pieces on a pallet
3 UNITS/SETS OF ATT0036 PACKED TOGETHER. A SINGLE ATT0036 CORRESPONDS TO: Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 460 x 350 x 200 mm; Approx. Weight: 70kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0036 PACKED TOGETHER: 460 x 1050 x h200 mm - 210 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-30
High power laser marker (80W) with a working field of 300 x 300 mm. Focusing through double red light pointer, motorized and easily operated Z axis, door with manual opening and closing. Air-cooled, 220 V, 50 Hz power supply. Computer and EZCAD software included. Machine condition: unchecked. Approx. Transport dimension: LxWxH 1300 x 1000 x 2000 mm; Approx. Weight: 300kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-143
Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 460 x 350 x 200 mm; Approx. Weight: 70kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-74
High power laser marker (80W) with a working field of 300 x 300 mm. Focusing through double red light pointer, motorized and easily operated Z axis, door with manual opening and closing. Air-cooled, 220 V, 50 Hz power supply. Computer and EZCAD software included. Machine condition: unchecked. Approx. Transport dimension: LxWxH 1300 x 1000 x 2000 mm; Approx. Weight: 300kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-299
\" Item: Digital caliper Manufacturer: HOLEX Item no.: 41 5611 300 Measuring range: 0–300 mm Version: Digital Sales: Hoffmann Group / HOLEX • Digital caliper 0–300 mm • mm / inch switching • Zero function • Stainless steel • Locking screw • Original plastic case • Documents available Condition: Mint condition. Very good optical condition, no recognizable damage. In the original plastic case, with insert/instructions and silica gel. Measuring surfaces clean, display works. • Measuring range: 0–300 mm • Resolution: 0.01 mm • Display: digital • Material: stainless steel • Power supply: \"Button cell \" Auction-ID: A7-46417-148
For transport and storage of all types of beverages ex: bier, wine, juice, liquor, whiskey. For yoghurt, mustard, honey, cream for hands, etc. Also for pharma and chemical purpose. Material: Cone: 1.4301 IIID Jacket: 1.4301 IIID All other parts: 1.4301 IIIC Volume: 1000 litre Test pressure:+ 3,4 bar Max. allowable: Operating pressure:+2,0/-0,15 bar Operating temperature:130°C Dimensions: Height over all:1845 mm +/- 10 mm Diameter of container:1000 mm Diameter of reinforcing ring:1012 mm Weight: 126 kg Thickness: Top Bottom:2 mm Lid:3 mm Jacket:1,5 mm Cone:2 mm Outlet Tube:2mm Forklift Tunnel:3 mm Design and Equipment: stacking device - consisting of a stacking crown which is welded directly on the top bottom; Top Bottom: with a DN 400 cover system which is welded in the center of the top bottom; Cover System with a DN 400 lid which ...
Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: 1 piece used gas nipring plant, make: Aichelin Useful: 1000 mm Useful length: 3000 mm 2 pieces of retort (one of which is only 4 years old and little used) 1 piece storage shaft 1 piece washing machine All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator informat ...
Kat-No 06-1101-1 New TOP quality at an affordable price, best stainless steel according to DIN, Welds minimal, stable feet Standard: Material V2A, 1.4301 according to DIN 17440, inside 3IIId=2B, exterior marbled Completely stained, passivated and neutralized "Remaining outlet DN 50 •Fill level indicator with bar and scale "Swimming lid complete with accessories •Ventilation and vent valve "Air pump Transport hook for lid on/off •Stand feet 3x 620 mm in the end Height Zyl: 1000 mm Total height: 1410 mm Supplements (please ask): Bracket for stairs, tapping tube for tap flap Gr.37 with disc valve NW 40=clear drain, disc valve DN 50, gallows, tap flap Gr.37, tasting valve. For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 Delivery: immediately from stock. All prices are ex works plus law VAT. ...
Cat.-Nr. 10-1735 in a very good condition with Mixer on the top With Manhole on the top 400 mm With Airlock DN 300 With CIP Cleaning System With Inlet DN 50 With thread Connector DN 50 With Level Indicator With Mixer on the side With Conical Bottom with Outlet DN 50 On 4 Adjustable Feet Measurements: Total Height: 4000 mm Body Height: 2450 mm Diameter with out Mixer: 2400 mm Diameter with Mixer: 2800 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Cat. No. 11-3160 New Standard: Material V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Heating jacket height 970 mm Insulation made of PU foam thickness = 80 mm Standard: Manhole top Ventilation valve made of PVC Manhole inside oval 440 x 350 and manhole outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with outlet pipe DN 50 Digital thermometers Clear drain DN 50 Transport eyelets Cat. No. Contents Diameter Height Cyl.Height Feet 11-3160-1 1200l 1350 mm 2070 mm 1000 mm 3 11-3160-2 2400l 1350 mm 3130 mm 2160 mm 3 Disc valve DN 50 Price on request For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Interm ...
Cat.-Nr. 09-1020 in a very good condition Standard Features: • with Manhole DN 400 x 300 mm • with Outlet Discharge DN 50 mm (DIN 11851) • with 2 x Connections on Manhole DN 50 mm (DIN 11851) • with Level Indicator DN 10 with Valve • with Connecting Flange for Mixer • with Filling Tube DN 30 mm • with 2 x Transport Hooks • with Connection Thread Measurements and Weight: Diameter: 2800 mm Diameter Cyl. incl.Filling Tube: 3000 mm Total Height: 6700 mm Weight approx: 3 ton For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Cat. No. 06-1101-6 new with Floating Cover - round vertical on Feet Cat-Nr.06-1101-6 available : 5 Standard Features: • Manufacturer: Eurolux GmbH • Material: 1.4301 acc.DIN 17440 AISI 304, inside 3IIId = 2B – outside marbled • Surface fully pickled, passivated and neutralised • All welds are treated and not porous to prevent the occurance of unwanted bacteria. • Firm Legs that ensure stability of the whole vessel • Drain Port DN 50 • Level Indicator • Floating Lid with Accessories • Xiring-escape Valve • Air Pump • Transport Hooks for Lid on/off Volume: 1000 litres Diameter: 920 mm Height Cyl: 1500 mm Total Height: 1910 mm Feet Quantity: 3 Surcharges/unit: (Prices upon request) Butterfly Valve DN 50 Clap Lid Crane Support for Ladder Connecting Pipe for Clap Size 37 with Butterfly Valve DN 40=Clea ...
Cat-Nr. 12-2765 in a very good condition With Cooling Jacket Surface: Outside and Inside: 2B=IIIC Upper Bottom: With Manhole Lid round 400 mm with Clamp With Inlet Connector DN 25 Tank Body: Mit Threaded Connection for Cooling Jacket DN 23 Lower Bottom: With Flat Conical Bottom with Central Outlet With Outlet Discharge DN 65 reduced to DN 50 Butterfly Valve With Threaded Connection with Outlet on Cooling Jacket DN 15 Measurements and Weight: Height x Diameter: 1560 x 1220 mm Height Tank Body: 960 mm Weight: 270 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Cat-Nr. 09-2090 new cubic Standard Features: • Outer Dimensions: 1050 x 1050 mm • Height Body Tank: approx. 1550 mm • Height Tank incl. Feet: 2000 mm • Material AISI 304 – Material Thickness: Tank 1,5 mm / Feet 2,5 mm / Hooks for Transport 2,5 mm • Weight: 154 kg • Volume: 1500 Liter • Manhole on the Top 400 mm - Lid with 4 Screws and Clamps with Bunging NW 50 (as per Photo below) • Bottom in Symmetrical Shape • Outlet Discharge DN 65 • Reinforcement 150 mm in each Corner of the Tank • Surface: outside marbled – inside IIID • stackable – 3 in empty, 2 in full • transport possible with Hand-Lift or Fork-Lift Surcharges / unit (upon request): Butterfly Valve DN 65 Butterfly Valve DN 50 Closing Cap for Outlet Reducing Unit NW 65/40 or 65/50 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-909052 ...
Cat. No. 12-2070 in very good condition Material: V2A – AISI 304 (1.4301) – Surface: inside and outside 2B=IIIC Upper Bottom: With ventilation hose DN 350 With weld-on fitting centrally located on upper bottom DN 65 With T-distributor threaded connection, one side DN 25 other side DN 50 With 2 crane lugs Tank Body: With manhole lid 450x350 mm With connection flange DN 300 for agitator on the side With connector for spray ball under the agitator Lower Bottom: With outlet DN 100 centrally located On 5 adjustable feet Measurements and Weight: Length: 5450 mm Tank Body Height: 3900 mm Diameter: 3300 mm Weight: ca.3,5 ton For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on d ...
Kat. No. 12-2170 in very good condition with anchor agitated mixer insulated DxH: 2650 x 4,300 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Cat.-No. 13.0327 in a very good condition ground inside and outside grain 180 for an additional charge with agitator upper bottom: • thread connection DN 50 and DN 25 tank body: • 2 openings for agitator Ø 450 mm and 280 mm lower bottom: • on 4 adjustable feets Measurements and weight: Height x diameter: 3400 x 2300 mm Height tank body: 2000 mm Weight: approx. 2 t Operating instruction for control valve and drawing available. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Kat. No. 12-2155 in a very good condition max. working pressure allowed: 1,8 bar max. temperature allowed: 130°C DxH: 1800 x 5000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Cat. No. 12-2135 in a very good condition Bi-Aseptic with Mixer on the side DxH: 2100 x 5200 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Cat. No. 12-2945 New Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: stable stack crown Manhole lid DN 400 6 x Star Head Eye Screws 1 x Threaded welding nozzle DN 50 with blind cap 1 x Overpressure valve 1 x CO2 ventilation valve Body: 4 x Beading stiffeners Underbody: forward pulled outlet pipe DN 50 Cone floor 4 feet, very stable design with pallet truck underpassable with forklift shoes for fork holder Supplement (on request): Fermentation spandconnection DN Trial tap Blind cap DN 50 Fermented spundar fitting CIP Cleaning The price is for a tank. Weight 85 kg Height 1410 mm Diameter 700 mm Cylinder height 750 mm Material AISI304 (V2A) 1.4301 Test pressure 3.4 bar Construction form vertical Working pressure range +2/-0.15 b ...
56 Boxes pallet rack (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -Stand 57 / 112 traverses -Traverse length 2.70 m -Load per level 1.5 tons -Shelf height: 2.00 m depth 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory be 450 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commercial customers from EU c ...
Attachment: Lamella separator Condition: pre-owned m³/h up to 3000 m Usage: Separation of solids and liquids by sedimentation. Lamella separator as a preliminary stage before filter presses are often used for thickening. The filter press in relation to the filter surface can be sized smaller through a thin slurry before thickening. The plant is in good condition and available for rent and for sale. Visit us at the factory is like possible agreement.
used approx. 30 m³ / 30000 litres steel tank interior coated double-walled above - ground - 2 steel base - good condition Dimensions: approx. Ø 2.00 m x about 10,00 m of the tank is coated from inside, double-walled and Get up 2 steel bases. Steel tank / container can be used as storage tank for water, manure, AHL, ASL, seeping juice, canola oil, edible oil, rain collection tank, and so on. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de
Cat.-No. 14.00230 in very good condition Cat.-N°: 14-00230L available: 1 unit 115 m tube in AISI 304 DN 40 Mount according to your Specifications Other Sizes upon Request Measurement and weight: total height: 400 mm Width: 700 mm total length: 3000 mm weight: 185 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale General terms and conditions listed on our website. Prices are subject to change without notice. Visit our Web-Site: www.eurolux-ag.com
Eurolux Beer Tanks / Fermentation Tanks in AISI 304 test pressure: 1,5 bar, operating pressure: 0,99 bar with Cooling Jacket with Isolation - Capacity: 1000 Litres NEW Material: V2A (AISI 304) 1.4301 Upper bottom: with Manhole with 6 Screws incl. thread connection DN 50 according to DIN 11851 with over- and underpressure valve Tank Body: with Cooling Jacket 600 mm wide with inlet 1” external thread with Isolation Lower bottom: With Conical Bottom and rest outlet underneath with a forklift and pallet truck Measurements and weight: WxH: 1150 x 1950 mm Zyl. height: 850 mm weight: 170 kg Surcharges/unit (price upon request): Fermentation Connector DN 50 Fermentation Lock Butterfly valve DN 40, DN 50 Sample Valve CIP Cleaning System Blind Cap DN 50 Immersion socket for temperature control Temperatur ...
Hydraulic radial engine Manufacturer Denison/Calzoni Type MR300D - F1N1N2S2NX 0401 / 46529, 742056 250 bar Used from Husky injection moulding machine type GL225 RS60/50
Axles: 6 Control: S3 Type: M92 Load: 30 kg Range: 1080 mm Accessories: handheld programming device Attention: without cable Condition: This robot only as spare parts support is available due to his age. The industrial robot has works fine up to the disassembly.
Rotary vane vacuum pump oil lubricated Manufacturer: Leybold Type: Trivac D 30 A & S 30 A Voltage: 400V / 50Hz suction power: approx. 30 m3/h end pressure: approx. 5x10e-3 mbar & 5x10e-2 Status: Generalueberholt Performance: 12 months Zubehoer: User manual mineraloel filling Quantity: several available delivery time. ready for use
Rotary vane vacuum pump - oillubricated Manufacturer: Leybold Type: Sogevac SV 300 Cat. No.: 10931 Status: Generalueberholt Gewast.: 12 months Including: oil filling (mineral oil), operating instructions with list of parts Voltage: 50/60Hz 230-400/460V Engine nominal: 5.5 KWfinal pressure or gasbalast: approx. 0.08 m bar Delivery time: ready for use; ready for use
Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 30,000 litres Diameter: approx. 2,000 mm Length: approx. 9,940 mm Weight: approx. 5,500 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilizer p ...
System: Used decanter / centrifuge Manufacturer: Baker Hughes Model: full coat screw centrifuge Type: CP 3044 . Nr: 6299 Year of construction: 2001 Höchstzul. Speed: 3600 I/min Inner diameter drum: 448 mm Drum wall thickness: 11 mm Drum material: 50-LF2 Max capacity: 174 dm3 Zul.Dichte 1.5 kg / dm3 Total mass: 3880 kg
Key data: 300 , 600
Rollers: dia. 300 x 600 mm Roll surface: smooth Rollers type: hollow bored NIP adjustment: Manuel Engine: 22 kW
Trumpf cutting head 3.75 inch Trump ID: 911218 / 1261653 -used cutting head, technically and visually in very good condition suitable for Trumpf L3030/3050/3530/4030/4050/6030/6050
Furrance 300c- HERAEUS T6120 Machine is in good working condition
We offer: Slats for slat curtain industry, used Dimensions: width approx. 2,000 mm x length approx. 300 mm Price per piece € 9,00 net plus 19 % VAT ex stock Harsefeld 10 pieces available. Price only valid while stocks last. Errors and omissions excepted. We are a commercial provider – VAT invoice.
The 30-40 KW Vaillant heat pump was an exhibit and ran for only a few hours - quasi-new! It is fully functional, max. energy efficient (A+) and suitable for all heat sources between -6 and 20 °C The VWS400 brine/water heat pump is intended as a heat generator for closed heating systems. Special features: – Flow temperature up to 65 °C for modernization and high hot water comfort – High efficiency thanks to modern, durable heat pump scroll compressor – Bivalent alternative or parallel operation possible – Increased living comfort in summer thanks to integrated cooling function (passive) – SG Ready and PV Ready – suitable for heating and hot water preparation – Up to 16 heating circuits possible thanks to integrated controller (with other accessories) Equipment: – Control for electric auxiliary heating up to 8.8 kW integrated – Sound decoupling of the ...
MAJA ARTICLE NUMBER : 716-2690 PULL ROLLER FOR MAJA EVM3006 EF ,EVM 4006 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
CUMMINS KTA 19 M3 447.42 kW (600 hp) - 1800 rpm SN 37208288 Brand: CUMMINS Model: KTA 19 M3 Power: 447.42 kW (600 hp) RPM: 1800 Engine Condition: Running Take Out...
LISTING ID: 22749 Brand: SCANIA Model: DI12 59M Power: 221 kW(300 pk) 1800 rpm Displacement: 11.7 L Bore x Stroke: 127 x 154 mm Dry Eight: 1130 kg
maximum number of results exceeded
please refine your search
75 € 
