rema dp 30 used for sale

Inv. Num. : 6499 Type: TVA-30L Producer: TONVA Created: 2019 Parameters: Switch-on hours: 8000 h Clamping force: 250 kN Injection Molding Stroke: 550 mm Height of the clamping plate: 900 mm Clamping plate width: 950 mm Screw diameter: 80 mm Material: PE Container capacity: 30 l Capacity: 90-100 kg Number of heating zones: 4 pieces Machine length: 4800 mm Machine width: 2200 mm Machine height: 3300 mm Spraying weight: 10000 kg Equipment: MAGUIRE PRS-20 Mill

tapered roller bearings -Bearing type: Tapered roller bearing -Bore: Ø 45 mm -Outer diameter: 85 mm -Width: 20.75 mm

tapered roller bearings -Weight: 7250 g -Outer diameter: 230 mm -Width: 40 mm -Inner diameter: 130 mm

tapered roller bearings -Weight: 3780 g -Outer diameter: 180 mm -Width: 34 mm -Inner diameter: 100 mm

FAS roller conveyors 3000-510-450 RA2402 Further information Manufacturer: FAS Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Available conveyor lengths (FL): 3000 mm, 5000 mm, 6000 mm, 7000 mm, 8000 mm, 9000 mm, 10000 mm, 11000 mm, 12000 mm, 13000 mm, 14000 mm, 15000 mm, 16000 mm, 17000 mm, 18000 mm, 19000 mm, 20000 mm, 21000 mm Roller width (RB): 450 mm Nominal/outer width (NB): 510 mm Roller pitch: 62,5-125 mm variable Drive types: center drive Gewicht Fördergut: bis 30 kg Optionally available e.g: frequency inverter for steples speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-415 condition: good (used) Conveying length in mm: 21000, 11000, 13000, 2000, 3000, 5000, 6000, 7000, 8000, 9000, 10000, 12000, 14000, 15000, 16000, 17000, 18000, 19000 Nominal / outsid ...

Size: 720 x 1020 mm Impression: 300 Mio. Equipments: Plate Cylinder Cocking blanket wash up device: autom. SAPC semi automatic plate changer Grafix Digitronic powder device wash device for impression cylinders Mitsubishi Delta Dampening Refrigeration & Recirculation System Non-Stop Feeder IPC II Intelligent Press Control high speed separator

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Piston tube outer diameter: Ø 135 mm -Stroke: 300 mm -Weight: 52 kg

Vacuum packer VAMA Specifications: Type: VB 300 Year of Make: 2016 230 Volt / 50 Hz / 10 A / 1.0 kW Weight: 40 kg Chamber size: 320 x 350 x 160 mm Sealing bar length: 310 mm Max. bag size: 300 x 350 mm Machine design Completely stainless steel Compact, solid design Surface ground Corrugated acrylic glass lid incl. 3 inserts for different height levels in the chamber High-performance pump with 8 m³ capacity Easy to use Vacuum adjustable Welding time adjustable Stock machine, immediately available! Function checked, condition see original pictures.

Transnorm conveyor belt GF 2100-400-300 RA2405 Technical data: Make: Transnorm Model: TS 6565 motor-driven belt diverter D=65mm Conveyor length (NL): 2100 mm Frame width (NB): 400 mm, 600 mm with motor Belt width (GuB): 300 mm Overall height (BH): 200 mm Support feet: optionally available Conveyor speed (v m/s): 2.0 Drive: Nord Electrical data: 50Hz V380-500, kW 1.1 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2017 condition: Ausstellungsstück Conveying length in mm: 2100 Nominal / outside width in mm: 400 Belt width in mm: 300 Driven: YES Engine type: Nord KW: 1,1/S1 Conveyor speed m / s: 2 scope of delivery: without supports and side guides For indi ...

WEMTECH Dynamic Torch 150/300 plasma cutting machine was built in 2022 in Poland by WEMTECH CNC. The machine, designed for precision machining of workpieces, is distinguished by the use of modern technical solutions that guarantee excellent production performance for many years of use. The machining process is performed on a table with a large cutting area which is filled with water or other coolant. The use of this solution eliminates the need to undertake any further secondary processes, such as grinding. The work table also has sectional exhaust extraction. The individual sections of the extraction table are controlled by pneumatic cylinders. The axes are driven by a stepper motor with a gear wheel mounted on a cushioned sled. This drive effectively eliminates backlash, as well as ensuring the achievement of high acceleration and working speed. The plasma torch, on the other hand,  ...

mobile welding fume filters, welding fume extraction -portable -Extraction port: 1 -Drive: 1 kW -Volume flow rate: max. 170 m³/h -Quantity: 1 available -Weight: 20 kg

Chip extraction, filter extraction, bagging filter -Drive: 0.96 kW -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm -Weight: 135 kg

Pressure leaf filter for filtration of vegetable oil - 8m² filter area - 720 litres - Pneumatically operated swing flap at the outlet - Including piping with valves - With control cabinet - Optionally with screw compressor

Machine vice, sturdy vice, drill press vice -Jaw width: 230 mm -Jaw height: 73 mm -Clamping depth: max. 300 mm -swivel -Weight: 70 kg

Machine vice, sturdy vice, drill press vice -Jaws can be moved depending on the workpiece geometry -Vise: rotatable -Jaw width: 255 mm -Clamping depth: max. 300 mm -Dimensions: 680/330/H180 mm -Weight: 95 kg

Veneer saw, veneer sawing machine, jointing cutting machine, fine cutting machine, fine cutting circular saw -Cutting length: 3000 mm -with extraction

Technical specifications: Machine: Eagle iNspire 1530 30kW Laser source: Model YLS-30000 CW Workspace: 1500mm x 3000mm Year of production: 2024 Laser power: 30 000W Head: eVa v11.020 2.0 Additional options: 1. PRODUCTION KIT - The production kit is prepared according to the machine series, laser power and set of consumables necessary to start production immediately. 2. PREPARING MACHINE FOR AUTOMATION - It allows for the possibility of an already installed fiber laser cutting machine to be fully integrated with an automation system in the future. 3. ADDITIONAL PULPIT - The operator doesn’t have to go in front of the machine to control the cutting process or run the program. On the additional control panel, the whole cutting process is visible thanks to the camera installed inside the machine. 4. EAGLE EYE - The function allows you to monitor all the activities taking pla ...

Endress + Hauser Promah H 300 5H3B50-L162/0 ser nr. RC088519000 PROFINET DN50

Labeller Manufacturer: DOMINO Type S80-PAX-L-305 Serial No. 55253

Key data: 3000 mm, 1500 mm, 12000 W

3000 x 1500mm - Extended cables for Mezzanine layout

Key data: 3000 mm, 1500 mm, 6000 W

3000 x 1500mm

Reflective light barrier, light barrier -11-30 V Price: per piece -Number: 8 available -Weight: 0.7 kg

Reflective light barrier, light barrier -10-30 V DC Price: per piece -Quantity: 9x Available -Weight: 0.4 kg

Labeller Manufacturer: HERMA Type H 300 SL Servo 8 Device No. 990 1109

Key data: 870 mm, 3000 mm

Turning length: 3000 mm Turning diameter: 870 mm above bed 560 mm over cross slide Weight between tips: 3,600 kg without bezel 4,400 kg with 1 bezel 5,600 kg with 2 bezels Spindle speed: 0 - 900 rpm Spindle bore: 162 mm Control: Fagor Equipped with: - Extra jaw chuck on the rear side of the main spindle - 1 fixed bezel Ø420 mm - 1 rotating bezel - 4-jaw chuck Ø800 mm - 3-jaw chuck Ø 400 mm - 10 tool containers - Coolant and chip container at the rear - Machine documents Country of origin: Spain Motor power: 30 kW Machine weight: 9,000 kg Machine LxWxH: 5.1 x 2.4 x 2.0 mtr.

Key data: 300 t, 4300 mm, 3700 mm

Printing capacity: 300 ton Bending length: 4,300 mm Stand width: 3,700 mm Back gauge: 550 mm Stroke length: 300 mm Projection: 450 mm Feed speed: 120 mm/sec. Working speed: 10 mm/sec. Retraction speed: 120 mm/sec. Control: Delem DA65 Equipped with: - Y1, Y2, X&R - Axis Controlled - CNC hydraulic crowning - Various sets of bending tools - Safety light cabinet Lazer Safe - Operating instructions and machine documents Country of origin: Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21,500 kg

two-arm drill, rotary drill, magnetic drill -Recording: MK2 -Nominal power input: 150 W -Connection: 230 volts -Transport case -Dimensions: 350/300/H100 mm -Weight: 5.5 kg

Semi-automatic with rotary table • Max. Tool dimensions 300 x 500 mm • Max. Tool height 120 mm • Max. output 16 cycles/min • Moulding and sealing possible with one tool • Temperature for forming and sealing plate can be set differently • Two-hand operation • 1 tool set available • PLC Omron SYSMAC CPM1 • Touch panel • Mobile • Drive 400V/50Hz

Machine for making plastic sleeves for bottle etc. Sleeve width 20 -200 mm Speed 200 m/min Accessories: 2 containers for solvents,  Extraction with blower, Perforation

Semi-automatic with rotary table Max. tool dimensions 200 x 400 mm Max. tool height 120 mm Output max. 16 cycles/min Forming and sealing possible with one tool Temperature for forming and sealing plate can be set differently Two-handed operation Without tool set Drive 230V/50Hz

Lock cylinders, carriage cylinders, WDS cylinders, holding arms for punching tools, screw S 30/24D, and much more

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool radius: 10 mm -Dimensions: 45 x 190 mm -Length: 3000 mm -Weight: 240 kg

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 150 bar -Liter flow rate: approx. 30 l/min -Drive: 3 kW 1400 rpm -Dimensions: 520/360/H340 mm -Weight: 65 kg

Clamping plate with T-slots, plate field, welding table, welding table, plate boring mill -Width: 190 mm -Length: 300 mm -Height: 240 mm -Table: 140 x 300 mm -Groove width: 14 mm -Weight: 24 kg

• Semi-automatic machine with rotary table • Max. tool dimensions 200 x 400 mm • Max. tool height 120 mm • Max. output 16 cycles/min • Moulding and sealing possible with one tool • Temperature can be set differently for moulding and sealing plate • Two-hand operation • Without tool set • Drive 230V/50Hz

Pipe sealing cushion, leak sealing cushion, sealing plate, pipe sealing -Pipe sealing cushions -Diameter: 300 mm -Number: 2 pillows available Price: per piece -Weight: 6 kg/piece

Inv. Num. : 8399 Type: QRM 300/4 Producer: SMERAL Generated: Parameters: Maximum sheet metal plate width: 300 mm Maximum sheet thickness when cutting: 4 mm Machine weight: 630 kg The straightening apparatus was completely repaired (rollers reground and new electrics).

geared motor, electric motor -Speed: 5000 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 9 mm -Protection class: IP 21 -Weight: 3 kg

Used plastic agglomerator, model GHX 300. New: 2021. Technical data: - Capacity 300 liters, - Recommended feed 200 liters, - Efficiency 220 kg/h (PE / PP PET / PA films), - Automatic or manual water supply, - 75 KW engine, - Installed set of six sets of fixed knives, - Rotating arm with double-sided knives, - Knife material 9 CrSi, - Pneumatic agglomerate discharge with the possibility of setting in automatic or manual mode, - Good condition / Used for only one year.

Inductive sensor, electronic sensor Manufacturer: IFM -Product Type: ITB 3001-BPOG -Quantity: 4x Available Price: per piece -Weight: 0.2 kg

Capacitive sensor, electronic sensor -Manufacturer: IFM -Product Type: KD-3050-BPOG -Quantity: 4 available -Price: per piece -Weight: 0.5 kg

Inductive sensor, electronic sensor -Manufacturer: IFM -Product Type: IA-3010-BPKG -Number: 8 available -Price: per piece -Weight: 0.3 kg

Capacitive sensor, electronic sensor -Manufacturer: IFM -Product Type: KI-3015LFPKG -Number: 2x capacitive sensors available -Price: per piece -Weight: 0.2 kg

Inductive sensor, electronic sensor -Manufacturer: IFM -Product Type: IN-3004LBPOG -Quantity: 4x Available -Price: per piece -Weight: 0.2 kg

Inductive sensor, electronic sensor -Manufacturer: IFM -Product Type: IN5129 IN-3004-BPKG -Quantity: 2 available -Price: per piece -Weight: 0.2 kg

Travel X/Y/Z: 400mm/300mm/495mm, spindle center table distance: 25mm-325mm, spindle nose table distance: 125mm-620mm, rapid traverse: 24m/min, feed rate: 5m/min, spindle type: ball screw, spindle diameter: 36mm, speed: 6000rpm, spindle power: 5.5kW, spindle mount: BT40. Tool slots: 30, tool change time: 2.5s, clamping time: 7s, max. tool diameter/length: 110mm/250mm, max. tool weight: 8kg. Table dimensions X/Y: 315mm/315mm, table angle: 7.5°, table clamping force: 3400kg, max. workpiece weight: 150kg. Dimensions X/Y: approx. 1900mm/2300mm, weight: approx. 4500kg, control: Fanuc 0-M, operating hours: 732h, piece counter: 172776. Including cooling lubricant system and tool magazine with 30 places. Documentation available. On-site inspection is possible.

Capacitive sensor, electronic sensor -Manufacturer: IFM -Product Type: KG5004 KB-3020-BPKG/NI -Quantity: 2 available -Price: per piece -Weight: 0.2 kg

Standstill monitor, standstill monitor, underspeed monitor, standstill monitoring, safety relay -Manufacturer: ifm, standstill monitoring safety relay -Type: DA0001 A300/230VAC -Price: per piece -Number: 7 available -Dimensions: 55/80/H110 mm / box 150/110/H65 mm -Weight: 0.3 kg/pc.

Inductive sensor, electronic sensor -Manufacturer: IFM -Product Type: IIB 3015-BPKG -Quantity: 5 available -Price: per piece -Weight: 0.2 kg

Sanding length: 700mm, sanding width: 330mm, max. workpiece height: 450mm, table dimensions X/Y: 280mm/600mm, table speed: 25m/min, sanding wheel dimensions: 305mm/25mm/76.2mm, spindle power: 3PS, machine dimensions X/Y/Z: approx. 2100mm/1600mm/2000mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.