rema dp 30 used for sale

Product number: 3092B Type: VVM 300.D Serial number: 235/08 Year of construction: 2008 Content: 300 litres Heating: steam, 40 kg/h Kettle inside size: 900 x 790 x 480 mm Basket size: 830 x 700 x 430 mm Infeed height: 950 mm Outfeed height: 300 mm Outfeed valve: DN40 Power: 3 x 400V, 50Hz, 0.5kW Dimensions: 1400 x 1100 x 1050 mm Weight: 360 kg

Manufacturer: Viscon haeter , Type: 222-307, FREETEXT1: Lack oder Öl Heizgerät, FREETEXT2: 2300 watt, FREETEXT3: Druck bis 256 bar, FREETEXT4: 9,6 Ampere, FREETEXT5: 240 Volt,

Magnetic chuck, permanent magnetic round chuck, magnetic clamp, magnetic chuck -Magnetic chuck: Permanent magnetic round chuck chuck size Ø 305 mm -Hole circle: Ø 170 mm -Receptacle: short cone 8 / cone 135 - 139 mm -Weight: 54 kg

Offer 24573 Specifications: - Cutting wheel diameter up to 356 mm - Separation capacity up to 120 mm -Mot. Cutting Feed -One. Transverse infeed 120 mm - Table dimensions 410 x 310 mm - Table travel 220 mm - Drive 400 V / 5.5 kW - Coolant device - Space requirement approx. W 1500 x H 1800 x D 1050 mm - Weight approx. 850 kg

Keyboard, control panel, PLC workstation, programming device, handheld programming device, programming adapter -Manufacturer: Pilz, programming adapter with case -Type: P10 PA 304113 -Dimensions of the case: 230/185/H45 mm -Total weight: 0.4 kg

PLC control, electronic module, interference filter -Manufacturer: Pilz, interference filter 10ms unused in original packaging -Type: C-P8-E 306100 -Voltage: 24V -Quantity: 3x module available -Price per piece -Dimensions: 190/150/H30 mm -Weight: 0.3 kg

Module converter, electronic module, base unit, module carrier, carrier clamp -Manufacturer: Pilz, module carrier unused in original packaging -Type: C-P2-BA-0 306004 -Dimensions of box: 180/135/H35 mm -Weight: 0.3 kg

Spiral seal, labyrinth housing seal, flange seal -Manufacturer: ISW, spiral seal: flange seal 5 pieces/package -Type: 4 Class 300 lbs like Spiraltherm 304SS with inner and outer ring -Quantity: 4 packages available -Price: per package -Dimension package: Ø180 x 30 mm -Weight: 1.8kg/package

ATEX calibrator disintegrator mill manufactured by BACHILLER in stainless steel, model MDCB 300. Equipment for the disintegration of agglomerated products, unification of particles for bulk solids and granulation of wet products. Productions from 50 to 5,000 Kg/h. Material Stainless steel Technical features Model MDCB 300 Year of manufacture 2011 ENGINE 1 TECHTOP 5,5 kW 50 Hz 975 rpm Equipment configuration ATEX Condition As is Made by BACHILLER

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Clamping surfaces: 300 x 160 x 20 mm / 300 x 200 x 30 mm -Dimensions: 300/160/H200 mm -Weight: 18 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control -Manufacturer: HACO, control panel with foot switch from press brake type PPES 30135 -Footswitch: Amber, with 2 pedals -Connections: see photos -Dimensions: 800/740/H1095 mm -Weight: 25 kg

Calibrating disintegrator mill manufactured by BACHILLER in stainless steel, model MDCB 300. Equipment for the disintegration of agglomerated products, unification of particles for bulk solids and granulation of wet products. Productions from 50 to 5,000 Kg/h. Material Stainless steel Technical features Model MDCB 300 Year of manufacture 2004 ENGINE 1 FIMM 4PE80 B 0,75 kW 50 Hz 1990 rpm Condition As is Made by BACHILLER

Crowning for press brake, bending bench, die holder with displacement device -Manufacturer: HACO, die holder with crowning for press brake type PPES 30135 -Matrix length total: 3050 mm -Individual components: see photos -Transport dimensions: 3570/260/H405 mm -Weight 374 kg

CNC control, card slot, control cards, plug-in cards, circuit boards, control -Manufacturer: Robosoft, Control Unit from HACO press brake type PPES 30135 -Type: HACC 013 -Dimensions: 100/85/H80 mm -Weight: 0.2 kg

CNC control, card slot, control cards, plug-in cards, circuit boards, control -Control card: from press brake HACO type PPES 30135 -Type: HACE 032 -Dimensions: 95/70/H50 mm -Weight: 0.1 kg

Manufacturer: Fladder, Type: Gyro 300, Year: 2006, Control: Programm, Number of units: 1, Working widht mm: 1300, Through running hight max mm: 120, Diameter of brushes: 320, Number of rotations controlled: yes, Units mounted upright: 4, Cross-brushing unit: yes, Through running hight max mm: 120, Vacuum belt: yes, Feeding speed continous adjustable: yes, Workpiece clamping technology: Vakuum, Year :2006

CNC control, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board, main relay board -Manufacturer: Robosoft, main relay board from press brake HACO type PPES 30135 -Type: PC15 PPESV2 -Board: 338-0149V3 -Dimensions: 400/200/H85 mm -Weight: 2.2 kg.

Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 1200 x 305 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bridge height: 40/10 mm -Gratings: Hot-dip galvanized -Quantity: 1x grids available -Weight: 13 kg

Vernier caliper, caliper, vernier caliper -Manufacturer: Holex, Digital Caliper -Item No.: 41 2811 300 -Measuring range: 0-300 mm -Measurement accuracy: 0.01 mm Quantity: 1 piece available -Case dimensions: 465/180/H30 mm -Weight: 1.0 kg

Manufacturer: Digicoater , Type: 3080, Year: 2005, Control: Siemens C 7, Work piece width min-max mm: 400 - 3.000, Min.-max. workpiece length in mm: 8.000, Min.-max. workpiece height in mm: 100, Spraying heads - total: 4, work piece detection: yes, Spraying stations: 4, Feeding speed m/min: 1,2 - 4,8, Electrical power consumption kW: 6,4, Required space L x W x H mm: 12.000 x 5.000 x 1.600, Year :2005

Manufacturer: Indramat, Type: KDS 1.1-100-300-W1, Serial number: 02751,

Door closer, floor door closer, closing mechanism -Manufacturer: Geze, Pendulo C door closer, unused -Function: Swing door 90 DEGREE - only locks at 0 degrees - 90 DEGREE -Art.No.: 3000-002336 H06-14-00-00 -Number: 44 door closers available -Price: per piece -Dimensions: 315/45/H65 mm -Weight: 1.3 kg

Hersteller : Fladder, Type: Gyro 300, Year: 1996, Number of units: 6, Engine power - kW: 12, Diameter of brushes: 320, Number of rotations controlled: yes, Fast exchange device: yes, Axle-diameter: 60, Vacuum belt: yes, Feeding speed continous adjustable: yes, Gewicht ca. kg : 2500, Year :1996

Manufacturer: Domino Digitaldrucker, Type: A 300, Year: ca.2006, FREETEXT1: inkl. Düsebhalter und Düsen, Year :ca.2006

Heating, burner, gas burner, fan burner, gas fan burner -Manufacturer: Dreizler, fan burner type GE 200/300 AR 2 -Nominal heat output: 355 kW -Gas type: natural gas -Gas connection: 20 mbar -Blower motor: 0.37 kW -Dimension: 760/510/H535 mm -Weight: 33 kg

Gearbox, spur gear, worm gear -Gearbox: Flat gearbox, unfortunately without type designation -Part No.: R 8 395-2 -Translation: 2-stage 1:8 / 1:2 counter-rotating -Shaft: Ø 45 x 55 mm / Ø 20 x 22 and 25 x 75 mm -Dimensions: 550/270/300 mm -Weight: 40 kg

Manufacturer: Cefla, Type: TR 3000/A-D, Year: 2015, incl.control: yes, Length-width mm: 3000x1300, Programming possible: yes, Length mm: 3000, Working widht mm: 1300, Total hight mm: 900, Conveyor speed m/min: 20, Drive power kW: 0,8, Year :2015

Manufacturer: Cefla, Type: TR 3000, Year: 2015, incl.control: yes, Length-width mm: 3000x1300, Length mm: 3000, Working widht mm: 1300, Total hight mm: 900, Conveyor speed m/min: 20, Drive power kW: 0,8, Year :2015

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose package: Dinse DIX KCZ 2-303 water-cooled -Length: 4.0 m -Quantity: 1x hose package available -Weight: 3.2 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Dinse DIX KCZ 2-303 water cooled -Length: 3,2 m -Weight: 2,7 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Dinse DIX KCZ 2-303 water cooled -Length: 5,3 m -Weight: 4,0 kg

Manufacturer: Nestro, Type: N-300-B ex, Year: 1986, Diameter intake mm: 300, Engine power kW: 2,0, Flow rate approx. m3/h: 4300, rotations rpm: 1405, Direkt drive: yes, Ex-protected: yes, Year :1986

Manufacturer: Böllhoff, Type: 30281-Lackheizgerät, Year: 1993, FREITEXT1: Betriebsdruck 280 bar, FREITEXT2: Betriebstemperatur 90, FREITEXT3: Prüfdruck 384, FREITEXT4: Druckraumvolumen 0,92, FREITEXT5: Nennstrom 16 Ampere, FREITEXT6: Nennleistung 3 Kw, Year :1993

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Hawe, hydraulic cylinder type PS 30/20 Z1143 -Stroke: 300 mm -Piston rod: Ø 20 mm -Hole: Ø 20 mm / distance 530 mm -Number: 1x cylinder available -Dimensions: Ø 62 x 570 mm -Weight: 4.9 kg

recessed light, LED spot -Manufacturer: SBF, recessed luminaire LED spot 110V/2W/3000K -Type: A1001628 -Connection: LED connector -Quantity: 1x light available -Dimensions: 100/90/H40 mm -Weight: 0.2 kg

Manufacturer: Dannfoss, Ersatzteil aus Maschine: Frequenzumrichter, Type: VTL 3006 175H7264, Menge: 3, Kw output: 7,2 / 9,2 kVA, FREITEXT1: 10/13 A,

Manufacturer: Indramat, Type: Indramat KDW 1.1-100-300-W1, Frequenzumrichter: yes, Motor: MAC 112C-ED-HC, Current (A): 100/100,

Manufacturer: Indramat, Type: MOD 3/1 X 003-334<CRLF>KDS 1.1 100-300-W1/220, Produktionsnummer: 237-787 B 12.065, Frequenzumrichter: yes,

recessed light, LED spot -Manufacturer: SBF, recessed luminaire LED spot 110V/5W/3000K -Type: A1000573 -Connection: LED connector -Quantity: 1x light available -Dimensions: 100/90/H40 mm -Weight: 0.2 kg

depth gauge, depth caliper, caliper, depth caliper -Manufacturer: CSE Inox, depth caliper -Measuring range: 0-300 mm -Vernier: 0.05 mm -Dimensions: 360/160/H10 mm -Weight: 0.3 kg

Manufacturer: Indramat, Type: KDS 1.1-100-300-W1, Modell: 3/1x110-006, Seriennummer: 02758, Current (A): 100/25, Operating rpm: 3500/Ma0.025V/8, Gebraucht: yes,

Manufacturer: Indramat Achscontroller, Type: KDV1-3-100/220/300 W1/220, Seriennummer: 758606-060 385 991, Gebraucht: yes,

Manufacturer: Indramat, Type: Indramat KDW 1.1-100-300-W1-220, Seriennummer: Mod 9/11008-140, war verbaut inMaschine: IMA,

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 85 mm / 90° / 2 holes Ø 18 mm -Dimensions: see photo technical drawing -Dimensions: 300/102/H81 mm -Weight: 8.7 kg

clamping plate, clamping table, clamping cube, press table -Clamping table: clamping plate for hydraulic press eccentric press -Clamping surface: 365 x 305 mm -Dimensions: see photo technical drawing -Dimensions: 365/305/H150 mm -Weight: 57 kg

V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 4-groove pulley type SPA 300 4 3020 -V-belt width: 13 mm -Hole: Ø 55 x 50 mm taper bushing 3020 (can be replaced) -Dimensions: Ø 300 x 65 mm -Weight: 14.1 kg

Manufacturer: Scheer , Type: DB 3000, Control: Fusspedal, Drilling beam swivel-mounted: yes, Number of drill spindles: 4, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 80, Beleimwerkzeuge: no, Dovel insertion: no, Work piece clamping: Pneumatisch, Pneumatic clamping: yes, Work piece support: yes, Work stations: 2, Foot switch: yes, Axis control for: no, Drilling hight: 60, Wight approx. kg: 1000, Abeitsbreite 3000 mm,

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: with conveyor belt, driven -Speed: 14 m/min -Conveyor belt: 2800 x 345 mm -Drive: SEW-Eurodrive 0.37 kW -Total dimensions: 3000/970/H320 mm -Weight: 176 kg

standard cooler, car cooler, oil cooler, heat exchanger -Manufacturer: AKG, light metal oil/air cooler from screw compressor Boge VLED 30R-11A -Type: 0720.067.000 -Pressure: max. 15 bar -Dimensions: 650/360/H550 mm -Weight: 40 kg

servo motor, DC motor, servo gear motor, servo actuator, drive actuator, servo drive -Manufacturer: HD Harmonic Drive, Hi-T Drive SERVO ACTUATOR -Type: RH-8-3006-T-SP -Shaft: Ø 18 x 20 mm -Dimensions: 200/60/H65 mm -Weight: 1.0 kg