rema dp 30 used for sale

geared motor, electric motor -Speed: 3.55 rpm -Power: 0.25 kW -Design: B5 -Shaft diameter: Ø 40 mm -Protection class: IP 54/55 -Number: 1x motor available Price: per piece -Dimensions: 550/250/H280 mm -Weight: 40 kg

Compressed air dryer, refrigeration dryer -Max. Pressure: 16 bar -Operating voltage: 380 V -Dimensions: 1050/950/H1770 mm -Weight: 556 kg

CNC lathe Type: Lynx 300 Manufacturer: Doosan Year: 2011 Control: Fanuc i Series Toolholders Machine in good condition, under power Find more here - / Contact us at -

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 302 mm -Height: 12 mm adjustable -Disk milling cutter -Socket: Ø 60 mm -Number: 2x milling cutters available -Price: per piece -Weight: 14.8 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 300 mm -Height: 12 mm -Disk milling cutter -Socket: Ø 60 mm -Number: 3x milling cutters available -Price: per piece -Weight: 12.7 kg

Specifications: Maximum cutting width: 3050 mm Maximum cutting capacity steel: 10.0 mm Cutting gap adjustment Cutting angle adjustment adjustable rip fence Dimensions (length x width x height): approx. 3500 x 2500 x 2050 mm Weight: approx. 9,5 tons

Van Rietschoten & Houwens 430-301E Exhaust Gas Averager

: 3050 mm : 06,5 mm : - : 0,5-2,5 ° : 1000 mm work height max.: 900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AIRCOOLED CHILLER CARRIER 30RB090R 93.4 kW Cooling capacity: 93.4 kW / 26.5 tons (12/7 — 35°C) Year of manufacture: 2021 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Type of refrigerant: R32 Compressors: 2 pcs. Danfoss DSF200A4ACA (scroll) Number of fans: 2 pcs. Dimensions: 2,3х2,1х1,3 m. Weight: 700 kg. Working hours: 0/0 h. Condition: New

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for drive heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 305 mm -Short taper: 8 -Number: 1x discs available -Price: per piece -Weight: 15.3 kg

Threaded rod, threaded bolt, threaded rods according to DIN 975 -Diameter: M24 -Threaded rod: galvanized -Quality: 4.8 -185 pieces, length: 2000 mm, price per piece: 15 EUR net -19 pieces, length: 3000 mm, price per piece: 20 EUR net

Output module, control card, output card, controller -Manufacturer: Bosch -Type: 047832-304401 -Type: 047832-303303 -Number: 1x control cards available -Price: per piece -Dimensions: 140/160/H15 mm -Weight: 0.14 kg

Specifications: Working length: 3000 mm Bending capacity steel: 6.0 mm Bending angle adjustment : 0 – 180° Upper beam opening: 300 mm Power: 7.5 kW Dimensions (length x width x height): approx. 4500 x 1850 x 2200 mm Weight: approx. 5 to

Diesel generator with Perkins engine Rolls,Royce in a quiet container. With control panel

Line choke, air gap choke -Type: 3005a/32532 -Price: per piece -Number: 5x available -Weight: 2.2 kg

PLC controller, expansion module, interface module -Manufacturer: SIEMENS -Type: Simatic S5 6ES5 305-7LA11 -Number: 1 module available -Dimensions: 50/135/H300 mm -Weight: 1.1 kg

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg

working area: mm speed: m/min Bar length: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 300 mm -Depth: 150 mm -Edge: 17 mm -Drain: Ø 52 mm -Number: 7x available -Price: per piece -Dimensions: 340/H150 mm -Weight: 2.1 kg

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg

Dematic conveyor system Accumulating roller3000-600-540 RA2361/61.1 Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 3000 mm Condition: good (used) Roller width (RB): 540 mm Nominal/outer width (NB): 600 mm Accumulation slot size: 625 mm Storage slot control: Plug and Play, electro-pneumatic Roller pitch: 62,5 mm Wheel diameter: 50 mm Partly rubberized for more grip when braking Drive module RA2361: Drive types: SEW geared motor Conveying speed: approx. 0.5 m/s Electrical data: 380-400V kW depending on total length The extension module always requires a drive module! Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides element length can be shortened up to 3m Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good ( ...

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Plow (auto/manual): Automatic, Maximum length to be rectified in plongeé: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg

Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 127 mm -Outer diameter: 300 mm -Width: 18 mm -Price: per piece -Quantity: 1 piece available -Weight: 1.9 kg

Chuck adapter, three-jaw chuck, three-jaw lathe chuck -Outer diameter: Ø 300 mm -Camlock cone mount: Ø 139 mm, size 8 -Bolt circle: Ø 172x6 mm -Receiving thread: Ø 80x5 mm -Weight: 46 kg

Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: 300 mm -Width: 12 mm -Price: per piece -Quantity: 3 available -Weight: 1.7 kg

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg

Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: Ø 300 mm -Width: 4 mm -Price: per piece -Quantity: 5 available -Weight: 0.6 kg

Specifications: Working length: 3050 mm Max. bending power: 30.0 mm Max. bending capacity length 1500 mm: 42 mm Bend: 25.0 mm Diameter upper roller: 460 mm Diameter lower roller: 460 mm Number of driven rollers: 3 hydraulic snap roller bearing Engine power: 37 kW Dimensions (length x width x height): approx. 5850 x 2550 x 2650 mm Weight: approx. 30 tons Note: Compact design, therefore low space requirement Parts of the hydraulics installed under the machine

Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: Ø 300 mm -Width: 6 mm -Price: per piece -Quantity: 6 available -Weight: 0.8 kg

Specifications: Working length: 3050 mm Distance between stands: 2690 mm Pressing force: 130 tons CNC Control: DELEM DA69 adjustable back gauge Controlled axes: Y1 / Y2; X; R; Z1 / Z2 CNC Table Bending Compensation MODUFIX clamping hydr. Tool clamping at the top and bottom Pneumatic tool displacement Angle measuring system Stroke: 365 mm Projection : 410 mm 2 pcs bending aids Motor power: 12.5 kW CE mark Dimensions (length x width x height): approx. 3800 x 2350 x 3150 mm Weight : approx. 13 tons Accessories: Tool Condition: good condition

Working area X 4000 mm, Y 2000 mm, Z 115 mm Weight 16000 kg parameters L x W x H: approx: 9800 mm x 5300 mm x 2000 mm Siemens Sinumerik 840 D type of laser TruFlow 4000 W max thickness 20 mm 4000 mm x 1250 mm feed 3400 mm Dismantling, loading, crane is not in price of machine - plus price per all services NC: 88631 - Resonator/HD pump 1: 87603 - Beam on/pump 2: 53667

A converted fully automatic strapping machine with a pressing function is being sold. This was converted by us to a GS-41 unit. This not only makes the machine 2.5sec/strapping faster, but also gives a fast E-part delivery. About the GS-41: Dimensions: 519x280x480mm Weight: 71 kg Power connection: 400V/3ph/50Hz Control voltage: 24V/DC Power requirement: 1kW Welding: Vibration welding Welding time: approx. 0.5-1.8sec Clamping time: approx. 0.5-max. Belt type: PP and PET Band width: 10mm-16mm Band thickness: 0.5-1.0mm The control system has also been adapted, and now there is a Siemens S7-1200 in it. The plant has not yet made 20,000 strappings! The machine hourly rate is only 50% compared to a new machine! If I have aroused your interest, please do not hesitate to contact us.

Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: Ø 300 mm -Width: 4 mm -Price: per piece -Number: 8 available -Weight: 0.6 kg

Used Fette tablet press model Perfecta 3000. 45 station. Initial pressing force 230 Kn. Main pressing force 100 Kn. Max tablet diameter – 16 mm. Max tablet filling depth 18 mm. Capacity 486000 tablets/hour. EU-B 19 mm tooling with the machine. Machine manufactured in 1995, overhauled in 2004.

Kaeser compressed air tank 3000 liters approx. 3 meters high

Grinding wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 32 mm -Outer diameter: Ø 300 mm -Width: 4 mm -Price: per piece -Number: 8 available -Weight: 0.6 kg

Pulling head, pipe assembly device -Internal threads need to be reworked -with electrical measuring connection -Dimensions: Ø 300/1050 mm -Weight: 215 kg

Compressor control, compressor control, control panel, control box, control unit -Manufacturer: WA Wille Automationstechnik, control box control unit -Type: unfortunately no type designation -Dimensions: 305/210/H110 mm -Weight: 4.2 kg

Specifications: Manufacturer: Charmilles Type: HD 30CNC Year of Make: 2004 Travel: X 300 mm Y 200 mm Z 300 mm Bore diameter range: 0.3 – 3 mm Depth: max. 200 mm Tool table Table dimensions: 500 x 300 mm Workpiece weight: max. 300 kg Mains connection Power Supply: 3/PE-380 V Fluctuation range: +10%/-15% Input power: 4 kVA Dimensions and weight: Dimensions: 1,340 mm x 900 mm x 1,940 mm Weight: approx. 1,200 kg Condition Condition: Used Functional: Tested and fully functional

Console, device, clamping angle, clamping table, clamping plate, support console -Support consoles: 2 pieces, from press brake Promecam STPC 250 40 121 -Support table extension: adjustable in height -Dimensions: 515/300/H785 mm -Transport dimension: 840/540/H310 mm -Total weight: 56 kg

Low mileage, Refrigerant R134a GWP 1430, Capacity 1475 g, Cooling capacity 3 kW at 20 °C and 32 °C ambient temperature, Connection voltage 400 V - 50 Hz, Current consumption max 5 A, Condenser: air-cooled, Dimensions: 480 x 400 x 800 mm, Weight: 60 kg Accessories: retaining plate for fastening,

Trumpf 3030 3000W 1999 Perfect machine, always under maintenance, with a new 3200 generator. CNC Siemens (no Bosch) Complete with everything, including disassembly.

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog module, analog output, interface module -Manufacturer: Siemens Simatic S5 Interface Module -Type: 6ES5 306-7LA11 -Cardboard dimensions: 310/250/H50 mm -Weight: 0.8 kg

Dimensions: 1520x1020x1260mm, Weight: 1550 kg, Grinding wheel gap: 1.5/50mm, Max.width of wheel in feed grinding: 125mm, Working wheel dimensions (od x id x width): 300x125x175mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8mm, Driving wheel dimensions (od x id x width): 220x125x125mm, Øext.min. driving wheel: 165mm, Working wheel motor power: 7,5Kw, Driving wheel motor power: 0,75Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º

Power supply unit, power converter, power supply, switching power supply, DIN rail power supply -Manufacturer: Siemens, Simatic S7 Power Supply -Type: 6ES7 307-1EAOO-OAAO -Number: 2x power supply units available -Price: per piece -Dimensions: 115/80/H125 mm -Weight: 0.6 kg/pc.

Mains choke, mains filter, output choke -Manufacturer: SEW Eurodrive, output choke type PBTP/30GF/VO -Item No.: 813 558 4 -Dimensions: 170/65/H185 mm -Weight: 1.1 kg

Fully automatic continuous system, 30cm belt width with hold-down belt and additional belt insert with turning station Frying length 2.35m with digital control for 7 different programs Bandgesch, adjustable mobile with fully automatic quark ball station with additional jolting for wreaths mobile tested and cleaned Immediately available from stock

Machine vise, heavy duty vise, drill press vise -Machine vise: rotatable -Clamping jaws 200 x 40 mm -Clamping depth: 300 mm -Dimensions: 630/325/H200 mm -Weight: 82 kg

Refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, filter dryer -Manufacturer: Alco, filter dryer -Type: ADK-305 -Pressure: up to 31 bar -Contents: 0.73 liters -Dimensions: Ø 80 x 265 mm -Weight: 1.4 kg

wire electrode, welding wire, welding wire -Gas wire electrode: roll started -Type: 308LSI Ø 0,8 mm -Dimension: Ø 300/100 mm -Weight roll: 5.9 kg