rema dp 30 used for sale

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 305 mm -Passage: Ø 105 mm -Rezess: Ø 250 mm -Weight: 31.3 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 0.85 kW -Speed: 1400 rpm -Max. Grinding wheels: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 600/420/H1140 mm -Weight: 222 kg

4-column punching tool, cutting tool, punching tool, punch, punching die, punching punch, -Punching tool with: bending function -Admission imensions: 300/205/H445 mm -Weight: 100 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Engine power: 1.1 kW -Grinding discs: 300 x 40 -Operating voltage: 380 volts

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Axle drive boring mill: WMW Union -Max. Speed: 2500 rpm -Torque: 25 Nm -Shaft: Ø 35 mm -Construction: B5 -Dimensions: 520/500/H270 mm -Weight: 45 kg

Rotary table, rotary dividing table, dividing attachment, dividing head -Handover in the current condition as seen -Condition: see photos -Table: Ø 300 mm -Height: mm -Groove: 14mm -Dimensions: 380/500/H130 mm -Weight: 51.5kg

Saw roller stand, saw roller stand, saw stand, roller conveyor stand -for: hacksaw, bandsaw, cold circular saw -Roller height: adjustable from 845-1350 mm -Roller width: 300 mm -Dimensions: 480/420/H845 mm -Weight: 9 kg

Blower filter device, welding smoke filter, welding smoke extractor, breathing apparatus -filters -in the suitcase -with out battery -Dimensions: 420/165/H335 mm -Weight: 3.2 kg

Cleaning fluid, cooling fluid for spindle oil cooler, spindle cooling for machining center -Number: 9x containers with 200 liter cleaning fluid -Price: complete -packed on: EURO pallet -Weight: 252 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm Magnet Motors, Servo Motor, Permanent Magnet DC Servo Motor -Max. Speed: 2000 rpm -Shaft: Ø mm -Number: 1x motors available -Price: per piece -Dimensions: 685/142/H190 mm -Weight: 31 kg/piece

Safety control, safety door switch, safety switch, safety sensor, magnetic switch -Type: 161 271 AC -Protection class: IP 67 -Number: 18 available -Price: per piece -Dimensions: 75/40/H55 mm -Weight: 0.2 kg

Thread cutting machine, pipe thread cutter, thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutter -for: Pipe size: max. 2 inches -Cutting jaws: 1/2-2 inch -Operating voltage: 240 volts -Dimensions: 1000/600/H1114 mm -Weight: 80 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Stroke travel: 275 mm -Piston diameter: 50 mm -Piston rod: Ø 20 mm -Quantity: 1 available -Price: per piece -Dimensions: 65/65/H530 mm -Weight: 4.85 kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 300 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Total length: 522 mm -Total length extended: 822 mm -End position cushioning: adjustable on both sides -Dimensions: 70/64/H522 mm -Weight: 4.65 kg

Engine Brand: SCANIA, Condition: USED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Green , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 350 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 300 , Generator Hz: 60 , Generator Volts: 450 , Generator Amps: 385 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/scania-dsi14-02-generator-300k va-used/33, , = More information =, , Year of construction: 1010, Empty weight: 2.250 kg, Type number: DSI14.02 300KVA GENERATOR

Engine Brand: SCANIA, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 300 , Generator Hz: 60 , Generator Volts: 450 , Generator Amps: 385 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/219424, , = More information =, , Year of construction: 1010, Type number: DSI14.02 300 KVA GENERATOR 300 K

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -single-acting cylinder -Piston diameter: approx. 55 mm -Piston rod: Ø 50 mm -Cylinder tube outer diameter: Ø 70 mm -Stroke: 300 mm -Total length when retracted: 552 mm -Piston rod mounting: Ø 30 mm -Universally applicable: -Number: 16 cylinders available -Price: per piece -Dimensions: 1350/80/H100 mm -Weight: 33 kg/piece

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 4 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3044-cjs179-18 54-used/60, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 3044 CJS179-1854; Transport weight [kg]: 335

Braking resistor, charging resistor, damping resistor, filter resistor -Manufacturer: REO -Type: REOHM BW 155/3000/60 -Resistance values: 0.8-600 ohms -Continuous output: 30,000 p -Number: 1x resistors available -Price: per piece -Weight: 10 kg/piece

Gear motor, electric motor -Speed: 56 rpm -Power: 1.5 kW -Construction: B5 -Diameter shaft: Ø 45 mm -Protection class: IP 54 -without breaks -Dimensions: 650/280/H300 mm -Weight: 50 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: approx. 16 m -for: electric wire rope hoist -Also other crane ropes available -Price: per roll -Number: 1x available -Weight: 3 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: approx. 38 m -for: electric wire rope hoist -Also other crane ropes available -Price: per roll -Number: 1x available -Weight: 7 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: approx. 33 m -for: electric wire rope hoist -Also other crane ropes available -Price: per roll -Number: 4x available -Weight: 6 kg

Engine Brand: JOHN DEERE, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: White , Flywheel Housing SAE: SAE 4 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 12 Volt , Rated Power: 55 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/john-deere-3029hfc03-new/1 64, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 3029HFC03; Transport weight [kg]: 525

Machine type: MIG/MAG welding machine Make MERKLE Type RedMIG 3000 K Appendix No. 132.175 Connection voltage 3 x 400 volts Adjustment range 25 – 280 amps Duty cycle 35% ED at 280 amps 60% ED at 240 amps Current setting 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive DV 26 Fuse 16 Ampere Dimensions L x W x H 940 x 445 x 760 mm Weight 120 kg Age 3 years Condition workshop tested, very good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Equipped 1 pair of welding gloves 1 Piece Instruction Manual Warranty 24 months from ...

turning diameter: 626 mm turning length: 3000 mm control: Siemens type: 840D spindle passage: 100 mm Turret 12-fold, 12 stations: turning speeds: 2800 U/min total power requirement: kW weight of the machine ca.: 18 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stop, depth stop, length stop for press brake, bending machine, guillotine shear... -Recording with: Slotted hole -Length (unit of measurement): approx. 300 mm - Fine-tuning -Quantity: 2 available Price: complete -Dimensions: 2x 410/320/H120 mm -Weight: 28 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25 mm -Drawing with the pictures -Total length: 303 mm -Total height: 171 mm -Weight: 10 kg

Manual trolley, trolley, crane trolley, trolley drive, crane drive, crane trolley, trolley -Beam width: 90-180 mm -Load capacity: 3000 kg -Number: 1x drive available -Dimensions: 320/330/H340 mm -Weight: 50 kg

Gear motor, electric motor -Speed: 3.55 rpm -Power: 0.25 kW -Construction: B5 -Diameter shaft: Ø 40 mm -Protection class: IP 54/55 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 600/250/H280 mm -Weight: 43 kg

Ultrasonic cake slicer Lummer U-301 - Ultrasonic cake slicer - Manufacturer: Lummer Food Technology - Type: U-301 - 3x300V50Hz - 3.0 kW - Year of construction : 09 / 2015

Gear motor, electric motor -Speed: 48 rpm -Power: 1.5 kW -Construction: B5 -Diameter shaft: Ø 45 mm -Protection class: IP 54 -Brake -Dimensions: 650/260/H280 mm -Weight: 56 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.35 kW -Speed: 1500 rpm -Max. Grinding wheels: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 730/400/H1075 mm -Weight: 156 kg

Dematic conveyor accumulating roller conveyors 2625-500-440 RA1995 Accumulating roller conveyor Nominal/outer width (NB): 500 mm Available conveyor lengths (FL): 2625 mm, expandable with further pieces Further information Manufacturer: Siemens Dematic Type: Accumulation roller conveyor Accumulation size: 750 mm Year of manufacture: unknown Condition: good (used) roller width (RB): 440 mm roller pitch: 125 mm variable drive type: SEW gear motor weight of conveyed material: up to 30 kg Accumulating mechanics: Light barriers with pneumatic valve and cylinder The following accessories are optionally available e.g.: Frequency converter supports side guides Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-400 condition: very good (used) Conveying length in mm: 2625 Nominal / outside width in mm: 500 Roll width in mm: 440 Ro ...

Sourdough mixer Kitzinger Sourmat 300 - Stainless steel sourdough stirrer - Kitzinger - Type: Sourmat 300 - 400 volts - with drain tap - on castors - Shell inner diameter: 72.5cm - Shell height inside: 64.5cm

2000 HAIDA INTERNATIONAL D-E 702-3000K40 Testing chamber Find more here - / Contact us at -

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.1 kW -Speed: 1400 rpm -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 690/500/H1260 mm -Weight: 148 kg

T-slot plate, clamping plate with T-slots, plate field, welding table, welding table -Dimensions: 3005/818/H800 mm -Height: adjustable -Plate thickness: 35 mm -Plate: with supporting ribs -7x dovetail: groove 38/48 mm -Groove length: 1820 mm -Weight: 1100 kg

Control: Mazatrol Fusion 640M Technical data: X-axis: [mm] 1740 Y-axis: [mm] 760 Z-axis: [mm] 660 Max. speed: [1/min] 10.000 spindle motor: [kW] 15 tool holder: SK 40 tool places: 30 Equipment: Chip conveyor No internal cooling (IKZ) Find more here - /

2005 STRIKO WESTOFEN MH I-2 3000/2000 Charging system Oven Technical data: See pictures Find more here - / Contact us at -

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 300 mm -Piston diameter: 100 mm -Piston rod: 20 mm -Air inlet and outlet: adjustable -Number: 2 pieces available -Piece price: 125 euros VAT. -Dimensions: 605/182/H165 mm -Weight: 10 kg

T-slot plate, clamping plate with holes, plate field, welding table, welding table -Dimensions: 3012/2010/H710 mm -Panel thickness: 82 mm -Plate: with supporting ribs -Weight: 3370 kg

ZENO CMX 300 / NT 65 Mixing plant Type: CMX300 M.No.: 15A-6180Pos.25 Motor: 2x 30KW/55A Year of construction: approx. 2014 Weight: approx. 6000kg Dimensions: with access = L 5450 mm x W 3700 mm x H 1800 mm without access = L 3950 mm x W 1700 mm x H 1800 mm Conveyor belt: Type: NT 65 M.No.: 15A-6180Pos.24 Motor: 11KW/21A Year of construction: approx. 2014 Weight: approx. 5000kg Dimensions: with access = L 13000 mm x W 3300 mm x H 1500 mm without access = L 13000 mm x W 1300 mm x H 1500 mm Dl777x Mixer & conveyor belt are one component. Find more here - / Contact us at -

Bending tool, die, lower knife, lower tool, lower beam, -Tool: for folding machine -Widening: for lower cheek -Dimensions: 33/76/3040 mm -Bore distance: 280 mm -Hole diameter: 18 mm -Length: 3040 mm -Weight: 33 kg

Straightening ruler, straightening rail -Angle: 32° -Dimensions: 3000/50/H8 mm -Weight: 8.4 kg

Cleaning container, safety container, cleaning container -Material: sheet steel -Container: Ø 295 x 235 mm -Strainer basket: Ø 265 x 100 mm -Number: 3x devices available -Price: per piece -Dimensions: 310/370/H740 mm -Weight: 8 kg

1989 Haco SL 3016 Shear Spanning 380 16mmX3050 Find more here - / Contact us at -

Machine Model and Specifications: - Model: Torrefacteur 3000 - Capacity: 50 kg per batch - Power: 5 kW - Voltage: 380V/50Hz - Dimensions: 1.5m x 1.2m x 2.0m - Weight: 800 kg Operational Features: - Automatic temperature control - Programmable roasting profiles - Built-in cooling system - Advanced safety features including emergency stop and overheat protection Find more here - / Contact us at -

Geared motor, electric motor, electric geared motor -Speed: 3.55 rpm -Power: 0.55 kW -Shaft diameter: Ø 50 mm -Design: B5 -Protection class: IP 54/55 -Number: 3x motors available -Price: per piece -Dimensions: 630/300/H270 mm -Weight: 62 kg

Sharpening machine Vollmer CAL 300 Left hand machine Specifications: Blade width: 100-420mm Blade length: from 8500mm Blade thickness: up to 2.8mm Tooth pitch: 20-120mm The height of the teeth up to 40mm Angle of attack up to 40 degrees Abrasive disc diameter: 300m Working speed 5-30 teeth/min Power 5.4 kVA/ 4.8 kW Weight approx 1600 kg Accessory: Oil vapor exhaust and filtration system Vollmer N170 emulsion filtration system Auxiliary feed for large blades Find more here - / Contact us at -