rema dp 30 used for sale

PLC control, digital input, digital input, input module -Manufacturer: mushroom, digital input Digital Input 24VDC -Type: P10-DIF 304105 -Quantity: 1 piece available -Dimensions: 250/230/H40 mm -Weight: 0.9kg

PLC controller, digital input, input module, digital output, expansion module, extension rail -Manufacturer: Pilz, Extension Module par. Extension Rail -Type: P10-EPE 304096 -Quantity: 1 module available -Dimensions: 250/230/H40 mm -Weight: 0.8 kg

Mixers for plastic granules and powdered products. Completely in stainless steel. Mixing motor 4 KW. Mixing chamber with separator on load cells. Pre-tank on load cells. Vacuum pump AZO 4 kW.

Key data: 3000 W, 1500 , 1500

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OT-6022 1.5kW Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 1.5kW - Energy requirements: 12.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine i ...

PLC control, digital input, digital input, input module, digital output, digital output, expansion module, extension module, extension rail -Manufacturer: Pilz, Extension Module par. extension rail -Type: P10-EPB 304091 -Quantity: 1x module available -Price per piece -Dimensions: 250/230/H40 mm -Weight: 0.8 kg/pc

Specifications: - Max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - Stroke rate up to 34 1/min - Backgauge with positioning control Pos100 - Table height approx. 850 mm - Front angle stop - 2 front support arms - Rear space protection with light barrier - E-foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg

PLC control, central assembly, RAM, CPU, central device, positioning assembly -Manufacturer: pilz, positioning assembly 6 axes -Type: P10-MMC6 304518 -Quantity: 1x module available -Price per piece -Dimensions: 250/230/H40 mm -Weight: 1.1 kg/pc.

Muller Martini Perfect Binding Line, Equipped With: Endsheet Feeder, Perfect Binder: Muller Martini 3006-18 with Stream Cover Feeder with 18 Stations, Book Block Feeder, Hot-Melt Spine and Side Gluing with Pre-Melter, Spiral Lay Down Balance or Drying Converyor to Trimmer. Three Knife Trimmer: Muller Martini 3670 With Cassettes for Quick Change, Stacker Delivery, Max. Size: 450x310mm, Max. Speed 6.000 Cycles/Hour, Max. Size Head/Tail: 420mm, Max. Size Spine/Front: 305mm, Production: 4.000 Books/Hour.

PLC control, central assembly, RAM, CPU, central device, central processing unit, compact device, compact CPU, processor -Manufacturer: mushroom, processor -Type: P10 CPU/RAM 304060 -Dimensions: 250/230/H40 mm -Weight: 1.3 kg

Aluminium Z-conveyor belt incl. substructure Horizontal range 1,200mm (customizable) Rising range 3,000mm (customizable) 2nd horizontal range: 1,200mm (customizable) Angle in the bend 45 degrees each Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable (can be moved) Conveyor belt width 700mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 80x50mm T-65Studs - 150mm 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is currently ap ...

Inv. Num. : 7570 Type: TruMatic L 3030 Producer: TRUMPF Created: 2001 Parameters: Laser power: 1800 W Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 20 mm Feed length X-axis: 3000 mm Y-axis feed length: 1500 mm Feed length Z-axis: 115 mm

MITSUBISHI S6A-300-3 300 HP 1530 RPM (S6A3 MPTK 405 kW 1840 rpm) Dry Weight :+/- 1900 kg Dimensions: 209 x 101 x 137 cm

Position computer, computer, control unit, robot controller, controller -Manufacturer: Pilz, AT-Industriecomputer -Type: P10-ATW VGA 304512 -Dimensions: 310/250/H165 mm -Weight: 4.4 kg

Module converter, electronic module, base unit, module carrier, subrack, basic carrier, basic mounting rail -Manufacturer: pilz, Basic Mounting Rail -Type: P10 BG-S 304006 -Dimension: 650/230/H40 mm -Weight: 2.8 kg

Offer 24245 Specifications: - Feed of the milling unit pneumatically - Work table adjustable in height via handwheel - Horizontal and vertical material tension - Milling cutter diameter up to 300 mm - Max. profile height 190 mm - Max. milling depth 110 mm - Max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - Milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross fence - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Electric heating: 28 kW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system Installation dimensions of the machine in cm: Width: 158 Length: 145 Height: 275 Trolley dimensions in cm: 100 x 100 x 200

Flat belt pulley, toothed pulley, multi-belt pulley, belt pulley, timing belt pulley -Manufacturer: Desch, timing belt pulley Ø 255 mm - Pitch: 14 mm / Belt width 55 mm -Receipt: Ø 40 x 50 mm taper bushing Desch 3020-40 -Dimensions: Ø 255 x 70 mm -Weight: 16.3 kg

DMG GILDEMEISTER CTX ALPHA 300 CNC turning center was built in 2008. The machine, designed for machining workpieces with a maximum diameter of 500 mm, is equipped with state-of-the-art technical solutions that guarantee extraordinary accuracy and precision. Machining is performed inside a large, fully illuminated workspace by a reliable spindle and high-quality cutting tools taken from a 12-position turret. In turn, the operator is provided with a state-of-the-art touchscreen control panel with a perfectly optimised FANUC CNC controller. High reliability, precision and structural stability make the GILDEMEISTER CTX ALPHA 300 CNC lathe the perfect choice for even the most intensive production work. The total weight of the machine is approximately 4350 kg. Technical data of the DMG GILDEMEISTER CTX ALPHA 300 lathe - maximum turning diameter: 500 mm - maximum cutting diameter: 200 mm  ...

Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 1,056 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x Shelf stand, used Material colour: sendzimir galvanised Frame profile dimensions: 31 x 60 mm incl. gravel bars and base plates The stands are pre-assembled Height: 2,280 mm Depth: 300 mm 05x Wooden shelf, used Particleboard width: approx. 985 mm Particleboard depth: 217 mm Material thickness: 22 mm 10x Shelf crossbar, second choice (new) Type: KTRZ 31036 Material colour: sendzimir galvanised Z-profile: 60 x 40 x 12 mm Clear width: approx. 994 mm Hole grid: approx. 53 mm Agraffe: 3 HK (hook) Weight | Pcs.: 1,700 kg Max. load per pair of trusses 300 kg with the same weight. Distributed load 10x Un ...

0: ja Working width: 3000 (3500) mm 0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Silo 3 m³ volume, payload 4200 kg, Net weight 600 kg Diameter 1800 mm, height 2400 / 3430 mm Spout height 1100 mm Outlet NW 250 Inspection/filling lid in silo roof NW 500 Silo butterfly valve Platform + Vertical Ladder

Key data: 3000 mm, 3 mm

with automatic hold-down device POS 100 E Control for Motorized Backgauge Single-angle stop 2 front support arms adjustable on linear rail Manual cutting gap adjustment 0.5 - 3 mm a sheet metal transport and stacking device is attached under the fence for transporting and depositing the cuttings Compressed air connection required Security fencing and light barrier available Adjustable back gauge 8 - 1000 mm Colour: grey/blue Total power requirement: 32 A with cutting gap adjustment without cutting angle adjustment Power: 3000x3.0 mm, 4.0 mm aluminum, 1.5 mm stainless steel Dimensions: 4000 x 1600 mm Weight: 4000 kg Machine number: 200034 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Silo 3 m³ volume, payload 4.8 to, dead weight 980 kg Diameter 1750 mm, height 3450 mm Spout height approx. 1050 mm Outlet NW 250 Blow-in line, vent line Inspection cover NW 500 in silo cylinder Filling lid NW 500 in the silo roof Platform with vertical ladder

Magnetic chuck, permanent magnetic round chuck, magnetic clamp, magnetic chuck -Magnetic chuck: Permanent magnetic round chuck chuck size Ø 305 mm -Hole circle: Ø 170 mm -Receptacle: short cone 8 / cone 135 - 139 mm -Weight: 54 kg

Keyboard, control panel, PLC workstation, programming device, handheld programming device, programming adapter -Manufacturer: Pilz, programming adapter with case -Type: P10 PA 304113 -Dimensions of the case: 230/185/H45 mm -Total weight: 0.4 kg

Center height: 300 mm Center width: 2000 mm Circumferential Ø: over bed 620 mm Spindle bore: 83 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 14 - 1000 rpm Feeds: longitudinal/flat 0.086-4.842/0.04-2.258 mm/rev Thread pitches: 0.5 - 28 mm Electrical connection: 380/400 V, 15 kW Space requirement: 3600 x 1200 x 1350 mm Weight: 3400 kg

PLC control, electronic module, interference filter -Manufacturer: Pilz, interference filter 10ms unused in original packaging -Type: C-P8-E 306100 -Voltage: 24V -Quantity: 3x module available -Price per piece -Dimensions: 190/150/H30 mm -Weight: 0.3 kg

Module converter, electronic module, base unit, module carrier, carrier clamp -Manufacturer: Pilz, module carrier unused in original packaging -Type: C-P2-BA-0 306004 -Dimensions of box: 180/135/H35 mm -Weight: 0.3 kg

Spiral seal, labyrinth housing seal, flange seal -Manufacturer: ISW, spiral seal: flange seal 5 pieces/package -Type: 4 Class 300 lbs like Spiraltherm 304SS with inner and outer ring -Quantity: 4 packages available -Price: per package -Dimension package: Ø180 x 30 mm -Weight: 1.8kg/package

Wood chipping machine Low-noise low-speed machine with press drawer WL12/30 Hopper dimensions 1200x1200 Diameter of shaft 368mm 58 cutting blades in two rows 15/20mm Strainer Main motor 30kW Weight approx. 3200kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Clamping surfaces: 300 x 160 x 20 mm / 300 x 200 x 30 mm -Dimensions: 300/160/H200 mm -Weight: 18 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control -Manufacturer: HACO, control panel with foot switch from press brake type PPES 30135 -Footswitch: Amber, with 2 pedals -Connections: see photos -Dimensions: 800/740/H1095 mm -Weight: 25 kg

Height 2100 mm Width 1800 mm Length 3900 mm Capacity 3000 l Total power 6 kW Main Material Stainless steel, acid-resistant Cooling jacket tumbler Yes, refrigeration unit built into machine design

Crowning for press brake, bending bench, die holder with displacement device -Manufacturer: HACO, die holder with crowning for press brake type PPES 30135 -Matrix length total: 3050 mm -Individual components: see photos -Transport dimensions: 3570/260/H405 mm -Weight 374 kg

Up-down sander SAC 4R-300 Working width 300mm Working height 2.5-150mm 4 sanding units 2x Bottom unit 2×5.5kW 2x top chiller 2×5.5kW Sweeping brush top and bottom' 2×0.55kw Adjustable feed on the inverter 4-16m/min Electric grinding height adjustment Ability to work in-line with other machines CE Certified Year of production 2001

CNC control, card slot, control cards, plug-in cards, circuit boards, control -Manufacturer: Robosoft, Control Unit from HACO press brake type PPES 30135 -Type: HACC 013 -Dimensions: 100/85/H80 mm -Weight: 0.2 kg

CNC control, card slot, control cards, plug-in cards, circuit boards, control -Control card: from press brake HACO type PPES 30135 -Type: HACE 032 -Dimensions: 95/70/H50 mm -Weight: 0.1 kg

CNC control, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board, main relay board -Manufacturer: Robosoft, main relay board from press brake HACO type PPES 30135 -Type: PC15 PPESV2 -Board: 338-0149V3 -Dimensions: 400/200/H85 mm -Weight: 2.2 kg.

Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 1200 x 305 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bridge height: 40/10 mm -Gratings: Hot-dip galvanized -Quantity: 1x grids available -Weight: 13 kg

Type Vacuum tumblers Height 2100 mm Width 1900 mm Length 1800 mm Weight 1100 kg Capacity 300 l Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant Barrel Aeration Valve Yes, Solenoid Valve Variable speed control of the tumbler Smooth adjustment of the barrel speed Cooling jacket tumbler Yes, refrigeration unit built into machine design Loading Loading integrated into the machine

Door closer, floor door closer, closing mechanism -Manufacturer: Geze, Pendulo C door closer, unused -Function: Swing door 90 DEGREE - only locks at 0 degrees - 90 DEGREE -Art.No.: 3000-002336 H06-14-00-00 -Number: 44 door closers available -Price: per piece -Dimensions: 315/45/H65 mm -Weight: 1.3 kg

max. width of grinding wheel: 125 mm diameter / bore of grinding wheel: 275 / 300 mm Flange taper: Reishauer Grinding disc flange for machine type Reishauer RZ 301 S For mounting ceramic grinding discs for tooth flank grinding - 125 mm wide, dimensions according to machine type Reishauer RZ 301 S 26 pieces available, price is per piece The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heating, burner, gas burner, fan burner, gas fan burner -Manufacturer: Dreizler, fan burner type GE 200/300 AR 2 -Nominal heat output: 355 kW -Gas type: natural gas -Gas connection: 20 mbar -Blower motor: 0.37 kW -Dimension: 760/510/H535 mm -Weight: 33 kg

Gearbox, spur gear, worm gear -Gearbox: Flat gearbox, unfortunately without type designation -Part No.: R 8 395-2 -Translation: 2-stage 1:8 / 1:2 counter-rotating -Shaft: Ø 45 x 55 mm / Ø 20 x 22 and 25 x 75 mm -Dimensions: 550/270/300 mm -Weight: 40 kg

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose package: Dinse DIX KCZ 2-303 water-cooled -Length: 4.0 m -Quantity: 1x hose package available -Weight: 3.2 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Dinse DIX KCZ 2-303 water cooled -Length: 3,2 m -Weight: 2,7 kg

Punching force: 550 kN (e.g. punches 30 m in 16 mm material), with search device via foot switch for punching Cuts 350 x 13 mm or 230 mm on the flat steel shear Projection: 305 mm Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side Range of tools is included in the price

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Dinse DIX KCZ 2-303 water cooled -Length: 5,3 m -Weight: 4,0 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Hawe, hydraulic cylinder type PS 30/20 Z1143 -Stroke: 300 mm -Piston rod: Ø 20 mm -Hole: Ø 20 mm / distance 530 mm -Number: 1x cylinder available -Dimensions: Ø 62 x 570 mm -Weight: 4.9 kg

Offer 24272 Specifications: - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting area - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 800 x D 600 mm - Weight approx. 80 kg - Table base W 900 x H 750 x D 500 mm