129,235 used machines on RESALE, but how to find them? Machine Search
Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T
NNP 300l holding vessel Stainless 300L holding tank horizontal, with level detection
max. ram stroke: 2 - 300 mm groove width: 2 - 32 mm power capacity: 8 kW no. of strokes: 2 - 300 Hub/min throat: ca. 300 mm Max. installation height: ca. 450 mm automatic feeds: 0,01 - 0,15 mm work speed: 0 - 30 m/min return speed: 30 m/min weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2,5 x 1,5 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Transnorm belt conveyor GF 3000-700-600 RA2225 Technical data: Conveyor length (NL): 3000 mm frame width (NB): 700 mm, 900 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 2014 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 3000 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: 1,30 Co ...
2 x 300 hl storage tanks, Fabr. Schulz Bamberg, bobbin bottom tanks, 0.9 bar, coolable via 1 cooling zone in the Double jacket, insulated with 130 mm and stainless steel sheet, with manhole in the lower frame, sight glass in the upper frame, with spray head with pulled down cleaning line, outlet pulled forward, ladder bracket, Crane eyelets, height: 4.25m, Ø: 3.95m, built in 2003, expanded
X-axis: 3000 mm Y-axis: 800 mm Z-axis: 720 mm Rapid traverse: X/Y/Z axis: 50m/min Control: SIEMENS 840D Recording: SK40 Speed: 18,000 rpm Mileage: total approx. 5,000 hours (of which approx. 500 hours since the overhaul) Spindle motor: 321V - 116 A Work table: W 3500 x L 820 mm Dimensions: L 5250 x W 4046 mm Drives: SIEMENS The machine is a 5-axis machine, where the turntable is both vertical, as well as horizontally. - Subject to technical errors and prior sale. -
MEMBRANE SKINNER, MAJA, TYPE: EVM 3006 Technical description: Serial number: 42728 Power: 0,75 Kw, 380 V, 50 Hz Working widht: 545 mm Dimensions: 1000 x 600 x 1050 mm This machine has only been designed for use in the meat processing industry. The EVM 3006 type is a membrane skinning machine used to open and manually remove the membrane and skin from pieces of fish, pork, beef, poultry, veal, game and horse. Only round and flat products may be processed on open membrane skinning machines (e.g. knuckle joints or thighs)
Stn -; Kuipers Woudsend steriltank. • Holdup volume 3000 litre, bruto 3400 litre • Working pressure -1/5 bar. • Test pressure 7 bar. • Design temperature 0/159°C. • Year of manufacture 2001. • Net weight ±1100 kg • Including complete documentation of tank.
Cross-flow fan QLN 65/0012 A3-3038-33 tg (several available)
Automatic stretch-banding machine incl. linear blister feeder, blister grouping and counting device and banding unit. Control system: SIEMENS, type Simatic S7-300
Specifications Cutting width: 3.8×48 mm Productivity: approx. 40 sheets (A4, 70g/m²) Cutting speed:- Year of construction: 1989 Safety level: P3 Power supply: 400 V / 2.2 kW
Servo drives from Indramat KDS 1.1-100-300-W1
300 m pallet rack Nedcon New goods, see pictures! A top shelving system from the major manufacturer NEDCON – this is a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height 6.5 m Depth 110 cm, blue Beam length 2.7 m orange Carrier with ballast /compartment 3050 kg, Negotiation price: € 52.490,-- net from stock Offer consists of: + 126 pcs. frame pre-assembled, depth 110 cm, height 6.5 m + 750 racks, length 2.7 m, 3050 kg ballast/compartment +1500 pcs Suspension locks + 504 pcs concrete anchors Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Field load 12 tons, higher bay loads possible on request. Carrier orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. ...
Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons
Lippert rising falling Incline belt conveyor GF 3050+800-750-600 RA2258 Technical data: Conveyor length (NL): 3850 mm ( 3050 mm + 800 mm ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17 DR63LA/TH/Z Electrical data: 50Hz V380-500, kW 0,25 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 3850 ( 3050 + 800 ) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentrala ...
We offer: Used collision protection corners 10 pieces, approx. 400 mm 22 pieces, approx. 300 mm at the warehouse 21698 Harsefeld. Per piece € 17,00 net plus 19 % VAT ex stock 21698 Harsefeld. Price only valid while stocks last. Subject to changes and errors. We are a professional provider – invoice with VAT shown.
sheet width: 0250 mm coil outside dia.: 1800 mm weight max. in kg: 2 x 3000 kg : 3,80 mm : 470 - 530 mm : 21 : 30 mm : 4 : 18,0 kW speed: 20 m/min power capacity: 18 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Decoiler AH 3000/2/250/ST with continuously variable drive, hydraulic central spread, Automatic post-spreading system, hydraulic pressure device, hydraulic swivel, Straightening machine RM 3025.4/21 with continuously variable drive, driven straightening rollers, manual Roller mill adjustment, quick-change device for the straightening rollers Belt loop control via ultrasound Material thickness / with material width 3.80 / 250 mm Material thickness / with material width 6.00 / 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 800x600x500 mm Weight: 60 kg Total power requirement: 0,25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 450 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
5 AXIS CNC WORKING CENTER BALESTRINI MOD. POWER 200 300 CE - USED - strokes: X-U 4000mm. Y 4000 mm. Z 700 mm. A 1000 ° C 400 ° (+/- 200 °) - n. 2 working tables 1400x3000 mm - n. 3+3 rails per each working table - n. 3+3 CSR supports per each table - head type CS 44 (n. 4 motors 7.5 kW each) - rpm 0/24000 g/min. with inverter - HSKC40/ER32 chuck - n. 2 inverters - wooden waste aspiration/cleaning device - Becker vacuum pump 100 mc - Electrical panel air conditioner - Num Axium control - T-CAS software - remote support - communication PC/CN TCP/IP - cabin + roof - CE rules - year 2010 - COMPLETELY RECONDITIONED
Inv. Num. : 7383 Type: AquaCut 3001.20WB Producer: MicroStep Created: 2016 Parameters: Control System: iMSNC Duty cycle: 35712 h Hours: 20646 h Work table length: 3000 mm Work table width: 2000 mm Equipment: Cutting head Drilling spindle
Inv. Num. : 5875 Type: KM 300-1400 C1 Producer: Krauss Maffei Created: 2001 Parameters: Laser ON: 70,000 h Clamping force: 300 t Screw diameter: 60 mm Injection capacity: 679 cm³ Injection mass: 618 g Min. height of clamping plate: 995 mm Min. width of clamping plate: 1050 mm Distance between uprights (horizontal): 630 mm Distance between uprights (vertical): 630 mm Ejector stroke length: 200 mm Maximum spraying pressure: 2000 bar Pump power: 45 kW Opening the mold: 820 mm Machine length: 6000 mm Machine width: 2100 mm Machine height: 2400 mm Injection weight: 12,500 kg Equipment: Robot Getecha Aschaffenburg GL 5 (built in 2001)
SECOND-HAND OLEO PNEUMATIC LATHE FOR TURNING AND SANDING OF SMALL WOODEN ELEMENTS LOCATELLI MOD. OMK 300 - control panel - automatic loader - Maximum working length 300 mm - min / max working diameter 8/80 mm - working stations: automatic loader turning with n. 2 gouges (roughing + finishing) 1° shaped knife 2° shaped knife unloading
Dimensions (L/W/H): 3030x360x660 mm Weight: 220 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 3030x450x660 mm Weight: 325 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 4400x4600x3700 mm Weight: 4300 kg Total power requirement: 3,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 4567 Type: 300-50 Producer: DEMAT Created: 2016 Parameters: Power consumption: 4.5 kVA Control cabinet / socket cover: IP 54 / IP 44 Length of conveyor: 2400 mm Conveying speed: 2 m/min Belt width: 250 mm Coil window size: 320 x 320 mm Weight: 180 kg
We sell a tape rounder from Gostol Gopan. The effective path is over 3m ! The machine is overhauled.
Dimensions (L/W/H): 4400x5000x3700 mm Weight: 4500 kg Total power requirement: 3,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2850x2270x2160 mm Weight: 1800 kg Total power requirement: 25,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity up to 6 tons For more details contact with us
Key data: 4 mm, 80 , 20
Heavy Duty Four-Sided Planer Still in operation until the end of July 2024! Detailed technical description in the PDF document (attached in the photo gallery).
Key data: 3000 mm, 500 mm, 480 mm
Offer Vertical machining center AXA VSC 2-3000 SMK built in 1996 with tool presetter cup Kalimat 250 + pico A1 Picture 1-10 The machining center is sold to our customer due to a business change. The customer must participate in the dismantling and loading by professionals. Indoor crane 8t is available. Manufacturer: AXA Maschinenbau Schöppingen Machine no.85506 Year of construction:1996 Running hours 21808 elect. X-axis stroke 3000mm /2 x 1000mm Y-axis stroke 500mm Z-axis stroke 480mm Spindle version SK 40 SMK changer for 30 tools Movable control panel with CNC path control Heidenhain TNC 407 right Switchboard Ball Roller Screw Measuring system Heidenhain Central lubrication unit Vogel Mini MFT Hydraulickapggregat Hydac Chip conveyor Connection 400/230 V, 63A Connected load: 28 kW Dimensions mm approx.: L 5010, W 2700, H 2900 ? Weight 6400 kg Accessor ...
Key data: 340 mm, 1000 mm, 5000 1/min
Control: OSP-P200 Turning length: 1,000 mm Turning diameter: 340 mm Vibration diameter above bed 580 mm Speed: 45 – 5,000 rpm Tool turret 12 places (driven) Bar passage 80 mm Direct recording: BMT 60 Equipment: - One touch IGF -Conveyor - Touchsetter - 3-jaw chuck (SMW 315 HB) passage 85 mm - NC tailstock - Multilingual control - Coolant pump 8 bar
Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2800x1140x1100 mm Weight: 1070 kg Total power requirement: 19 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1500x1295x1300 mm Weight: 1150 kg Total power requirement: 16,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 5500x4000x2250 mm Weight: 8000 kg Total power requirement: 45 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 7446 Type: DYNAMIC FC 3000 CNC Producer: SAHOS Created: 2011 Parameters: Control system: HEIDENHAIN Spindle drive power: 18 kW X-axis travel: 3000 mm Y-axis travel: 1500 mm Z-axis travel: 1070 mm
Key data: 3000 mm, 8 mm
Max. cutting length: 3,000 mm Max. sheet thickness: 8 mm steel Motorized backgauge with fine adjustment via handwheel up to 1000 mm Cutting length limitation Knife sharpened Weight: 6,800 kg
Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 5500x3400x1900 mm Weight: 9000 kg Total power requirement: 48 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 5 , 230 mm, 130 mm
I sell the Weinig Unimat 300 four-sided planer, built in 2004 Feed speed 5-30 m/min. Working width 230mm Working height 130mm 5 Spindle Configuration: bottom - right - left - up - down Combined power 28kW 3-zone pneumatic pressure Good condition. Fully operational! Available soon. Includes full documentation and CE certification.
Dimensions (L/W/H): 2860x1140x1100 mm Weight: 1070 kg Total power requirement: 19 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 3000 m³/h power capacity: 2,2 kW Speed: 3000 U/min. : 200 mm Dimensions (L/W/H): 1250x700x2000 mm Weight: 160 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
