rema dp 30 used for sale

Repair service Reparatur Service Part: Axle amplifier type MR-S11-300-E Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Gebhardt roller curve conveyor 90° right 610-550 with 2x straight piece RA1282 The Gebhardt roller curve is from 2007 and in a very good (used) condition. It has an engine of the brand SEW. Supports are included in the scope of delivery. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 014.15 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Length straight frame: 1 x 300 mm + 1 x 150 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.37 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 110kg Scope of delivery: with supports 670 mm total high Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Deliver ...

Repair service Reparatur Service Part: Axle amplifier type MR-S12-300-E Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Dematic Conveyor Roller Conveyor 3000/2500/2000/1500/1000-600-540 RA1938 Gravity conveyors - roller conveyors without drive Nominal/outer width (NB): 600 mm Available conveyor lengths (FL): 3000 mm, 2500 mm, 2000 mm, 1500 mm, 1000 mm Further information Manufacturer: Siemens Dematic Type: Roller conveyor Year of manufacture: unknown Condition: good (used) roller width (RB): 540 mm roller pitch: 62,5-125 mm variable drive types: none or head and center drive weight of conveyed material: up to 30 kg The following accessories are optionally available e.g.: Motors with and without frequency inverter of the brand SEW Eurodrive / Movimot. supports side guides Features: condition: new Conveying length in mm: 1000, 1500, 2000, 2500, 3000 Nominal / outside width in mm: 600 Roll width in mm: 540 Roll division in mm: 62,5, 130 Driven: möglich scope of delivery: without supports and side guides F ...

Key data: 5 , 300 mm, 200 mm

Spindle arrangement: scoring saw at the bottom - planing shaft at the bottom - top - right - left Diameter of spindles: 40-X-X-50-50 Spindle Speed: 5400 Counter bearings: 2-3 Jointer: 2-3 Engine powers: 15-45-55-22-18,5 Adjustment of the working width: digital Adjustment of the working height: digital Feed speed : 50 - 200 Feed motor: 45 KW Feed: Cardan Horizontal tool head D205 Vertical tool head D160xH100 Z12 Table height constant approx. 1000mm Diameter of suction nozzles 200-250-160-160-120 Weight 13000 kg

Offer here a linear actuator with 30cm stroke and 8cm piston diameter. Ready to use with check valves, flanges, 16mm QuickLocks. It also comes with a plant dismantling and worked without any problems until the expansion. It can be seen in Weyhe near Bremen.

Data sheet of retrofit POS. GE 14.45 Gebhardt roller conveyor (without drive), FB = 550 mm, 3000 mm = FL Type: Gebhardt roller conveyor type 330.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Weight: 14 kg/m = G Length: FL = 3000 mm Conveyor width: FB = 550 mm Overall width B = FB + 60: B = 610 mm Side profile: Aluminium Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Support: ask without support, if needed Condition: functional and visually good condition Features: Construction year: 2007 condition: very good (used) Conveying length in mm: 3000 Nominal / outside width in mm: 510 Roll width in mm: 450 Roll division in mm: 100 Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telef ...

Key data: 800 KW, 1000 kVA, 400 V

NEW/Surplus MWN 3016 V 16, 800 kW, 400v. 50 Hz. CHP Enclosed Natural Gas Generator Set Rating: 800kW, Electric Power: 800kWe Power factor (cos. phi): 1.0, 400 Volts, 3Ph, 50Hz, 1500 Rpm Altitude: max 1100m a.s.l., Ambient temperature: +5 up to +53 degC Engine: MWM 3016 V 16, 16 cylinders in V, water cooled, turbo charged with intercooler Alternator: 800kW / 400V synchronous, 3 phases, brushless, self-exciting, self-regulating, air cross flow ventilated, protection mode IP23, engine flywheel and generator shaft coupled, engine and generator coupled over SAE flange and fixed to one unit, genset mounted with vibration dampers. Control unit MMC consisting of: Electronic speed regulation for the engine,  Cos. phi regulation for the engine, Complete engine monitoring and control, Complete generator monitoring, Display of all relevant data (voltage, frequency, power, temperatures, oil pr ...

Key data: 3100 mm, 6 mm

Working length: 3100 mm Cutting capacity: 6 mm Backgauge range: 750 mm Equipped with: - 3 sheet metal support arms - Rear access protection - Foot pedal Engine power: 11 kW Machine LxWxH: 3750 x 2350 x 1850 mm Machine weight: 5500 kg

Turbomixer: 300 liters, brand: Caccia, stainless steel, engine: 380 V 2 speeds; 1st gear: 63 hp at 1800 rpm and 2nd gear: 75 hp at 2960 rpm.

Properties Volume 7300 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 3 Total height 3550 mm Height 2720 mm Diameter width 2550 mm Weight 450 kg Surface inside IIID Surface outside IIID marbled Description Topsoil: curved bottom 2 crane eyes Upwardly drawn surround with threaded nozzle DN 50 for airlock Tank cylinder: Level indicator with bar and scale with standpipe valve DN 15 Manhole 430x330 mm Sample tap DN 20 Ladder hook at the top Clear drain with inclined seat DN 50 Subsoil: curved bottom forward-drawn outlet surround Forward-drawn floor bead with disc valve DN 50 3 shell feet with calottes - height adjustable

CNC lathe LB 3000 EX II Manafacture: Okuma Corporation Year of manufacture: 2017 Control OKUMA ... OSP-P300LA Turning diameter ... 580mm Turning length ... 950mm inclined bed Axis Y ... 120mm Spindle bore ... 91mm Tool turret ... 12/12 Axis X ... 260mm Axis Z ... 510mm Spindle speed ... 0-5000 rpm. Rapid traverse of the X axis ... 25m/min Rapid traverse of the Z axis ... 30m/min Rapid traverse of the Y axis ... 12.5m/min Axis C ... 360° Main engine power... 22kW L x W x H ... 3420 x 2041x 2444 mm Machine weight ... 6600kg The machine is in good condition, possible to test under power.

Three-roller calender brand MG 3000 x 200 mm. Year 2006

Key data: 3000 mm, 1500 mm, 6000 W

3000 x 1500mm Dynamic Edition

Ref. -No.: 10366 Manufacturer: MONFORTS Year of construction: 2000 Type of control: CNC Control: EURO TURN Storage location: Halberstadt Country of origin: Deutschland Machine length: 5000 mm Machine width: 1970 mm Machine Height: 1800 mm X stroke: 370 mm Z - stroke: 2880 mm Chuck diameter: 200/250/315 mm Centre Distance: 3040 mm Spindle Head: DIN 55027 - 8x220 Feed Capacity - Z: 18,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 5 m / min Rapid Travel Speed Z-Axis: 10 m / min Circumferential diameter over radial slide: 350 mm Max swing diameter: 720/630 mm travel of the cross slide: 375 mm Spindle head max. passage for violent material: 68 mm Spindle head max. passage for bare material: 70 mm Tailstock outside diameter of the quill: 110 mm Tailstock maximum quill stroke: 210 mm Tailstock inner cone: MK6 Type Further information: Additional lubricating oil tank approx. 6l

Complete BOSCH line for sterile ampoules filling under isolator Production: 400 ampoules per minute working range • Diameter : From 9 up to 30 mm • Height : From 60 up to 160 mm • Formats incluided :1 - 2ml The machine comes with ISOLATOR and DEDICATE AHU AND CIP/ SIP IPC (weigh control ampoules)

Ref. -No.: 10365 Manufacturer: MONFORTS Year of construction: 1997 Type of control: CNC Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Spindle Head: DIN 55027 - 11x290 Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tai ...

Ref. -No.: 10265 Manufacturer: PROTH Type of control: Konventionell Storage location: Halberstadt Country of origin: Taiwan Serial no.: 0011G-05 Max. Grinding length: 600 mm Grinding Width: 300 mm Workpiece Height: 312 mm Travel X: 700 mm Travel Y: 340 mm grinding wheel dimension: 355 x 25 x 127 mm

Ref. -No.: 10368 Manufacturer: BYSTRONIC Year of construction: 2011 Type of control: CNC Control: Bystronic ByVision Storage location: Halberstadt - Germany Country of origin: Schweiz Manufacturer: BYSTRONIC Laser medium: CO² Kohlenstoffdioxid wavelength: 10600 Nm Maximum power: 6000 Cw Workspace X: 3048 mm Work area Y: 1524 mm Stroke Z axis: 100 mm Positional deviation Pa: +/- 0.1 mm/m Position spread Ps: +/- 0,05 mm Positioning in axis-parallel X and Y maximum: 120 m / min Positioning simultaneously X/Y maximum: 169 m / min Axis acceleration X/Y maximum: 30 m/s^2 table load capacity: 890 kg table change time: 25 s

Ref. -No.: 10233 Manufacturer: DISKUS Year of construction: 1973 Type of control: Konventionell Control: N/a Storage location: Halberstadt Country of origin: Deutschland Serial no.: 6984 Weight Of The Machine Ca.: 3 t Further information: Discuss - surface grinding machine

Machine type: MIG/MAG welding system Make Oerlikon Type Minicito 304 Connection voltage 3 x 400 Volt Adjustment range 35 – 300 amps Duty cycle 35% ED at 300 amps 60% ED at 230 amps 100% ED at 180 amps Current setting: 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder toothed 4-roller gearbox Fuse protection 16 amps Dimensions L x W x H 950 x 400 x 820 mm Weight 80 kg Age approx. 15 years Condition workshop-tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece of hand shield 1 piece of protective glass 10 DIN 1 piece of glass attachment white 1 spare  ...

Specifications Cutting width: 3.8×48 mm Year of construction: 1992 Productivity: approx. 40 sheets (A4, 70g/m²) Price: on request Cutting speed:- Safety level: P3 Power supply: 400 V / 2.2 kW Machine is fully functional, after technical supervision.

Overhauls gearbox Reduction 4,950 : 1 Input shaft counterclockwise Output shaft counterclockwise

Offer 23293 Specifications: - Printing capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - Infinitely adjustable stroke 0 to 28 mm - Stroke rate 26 to 36 1/min - Projection 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - Weight approx. 1300 kg - With: - Foot switch - Grain detection device, - Support table with foldable stops W 1100 x D 850mm - Sliding paths of the stops from the center of the punch - Width between Li and Re approx. 470 mm x D 510 mm

• Single rotary press with 47 punch stations • Tool type EU 19 with BBS dies (die diam. 22 mm) • Unkeyed turret • Output 28,200 - 282,000 sheets/hour • Pressing force max. 80 kN, pre-pressing force max. 20 kN • Tablet-diam. max. 13 mm • Tablet height max. 8.5 mm • Filling depth max. 18 mm depending on filling curve (filling curve 10 mm fitted) • Filling hopper with flange for docking Bohle container MCG500/900 for powder feeding • Agitator blade filling shoe (Fill-o-matic) for fine powder materials (1 spare filling shoe available) • Fast diverter for missing tablets • Korsch PHK2i Plus press force control system • Touch screen Siemens, software operating system Windows CE • PLC Siemens S7-400 • Existing tool set 2x 47 pieces for tablet-diam. 9 mm, flat/flat with facet • Drive 400V/50Hz • New cabling between control cabinet and machine (wi ...

pressure: 200 t chamfer lenght: 3050 mm distance between columns: 2550 mm Control: CYBELEC VisiTouch Pac stroke of ram: 524 mm weight of the machine ca.: 17.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tumbler Glass Dimensions: 80x100x160cm Electric power: 5kW Volume: 300 liters

IMAC Plasma Cutter Working range 3000x1500 Workable thickness 15/20 mm. complete with vacuum cleaner Updated Software CD

Blister packaging line, consisting of: Thermoforming blister machine Mediseal CP 400 and folding box cartoning machine Mediseal P 3000, incl. new PLC, operator terminal (HMI) and servocontroller: Thermoforming blister machine CP 400: • Set up for PVC/ALU film (conversion to ALU/ALU possible at extra cost) • Output thermoforming station max. 50-60 cycles/min depending on blister format • Output punching station max. 400 blisters/min depending on blister format • Foil width max. 160 mm • Roll diam. max. 500 mm, core diam. 70-76 mm • 2 roll holders for thermoforming film with film spreader and gluing device for roll change during operation • Pull-off length in thermoforming range 140-220 mm • Drawing depth PVC max. 12 mm • Drawing depth ALU max. 9.5 mm • Feeding: directional tablet feed with spiral conveyor and alternatively brush box (without format parts) ...

• Stainless steel pharmaceutical version • Payload 350 kg • Lifting height top of fork approx. 140 cm without telescope • Fork width 170 cm, fork length 115 cm • Drive • New accumulator • New charger • Only 71.3 operating hours • El. connetcion 230V/50Hz

Alfa Laval UVPX 307 AGT 14 Separator Centrifuge Oil Fish, Olives 5750l/h Motor 5.5 kW

dmp Sondermaschinenbau type ORL-300 orientator for plastic bottles, bottles where the caps are not in the correct position to the position of the labels are turned by 180° before being delivered to the next machin, capacity 120 bottles per minute, electrics 3+N+PE 400V/50Hz/16A, power consumption approx. 1,1 kVA, compressed air max. 6 bar, machine floor space approx. 1200 x 1050 mm (LxW), machine height approx. 2100 mm, machine net weight approx. 200 kg

turn - diameter over facing slide: 450 mm turning diameter over bed: 830 mm turning diameter: mm turning length: 3000 mm control: Siemens total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

6000w TruDisc 3000 x 1500mm Big specification

Key data: 3050 mm, 1200 mm, 120 mm

Technical version: Console table 3050 x 1200 mm with manually movable 6 brackets, 2 vacuum cups per console and a pneumatic excavation rail Spot laser set-up aid, vacuum pump CNC control XILOG Plus Main spindle 7.5 kW HSK 63F with C-axis, 1500 – 24,000 rpm Tool changer plate 10-fold 1 adapter unit swivel saw Drill head with: 12 vertical spindles, 4+2 horizontal spindles, groove saw Installation dimensions: 6800 x 3040 mm Weight: 2850 kg

Pfeiffer Vacuum Hicube 300 brand new, in stock. 12 months warranty.

Brand: Zerma, model: GSL 300/800, motor: 18 Kw (25 hp), stepped rotor, year: 2003. With electrical panel and vacuum cleaner: 2.2 Kw (3 hp).

Key data: 610 mm, 1080 mm

Stock number: 3860 CNC LATHE Manufacturer: Mazak , Type: Integrex 300 II SY Year of construction: 2002 Specifications: Max. circumferential diameter 610 mm dia. Max. turn. About Bed 610 mm Dia. Turning length 1080 mm Main motor power 26 kw Main spindle speed range 35-3500 rpm Spindle bore 65 mm dia. C axis - main spindle movement 0.001 degrees X axis movement 580 mm Z Ash Movement 1137 mm Y axis +/- 115mm mm B Axis Movement -30° to +195° Degree B axis spindle speed 10,000 per/min B axis spindles effect 15 B axis tool system KM 63 Z Aksen rapid traverse 30 m/min Counter spindle C Axis - Counter Pindle Movement 0.001 Degree Motor Power Counter Spindle 22 Kw Control Mazatrol PC-Fusion 640MT Fabr. Spindle operating hours 6483 hours Accessories: ATC Tool magazine with 80 stations Miscellaneous tools Cooling by spindle  ...

CNC lathe LB 3000 EX II Manufacturer: Okuma Corporation Year: 2017 Control OKUMA ... OSP-P300LA Turning diameter... 580mm Rotation length ... 950mm Inclined bed Axis Y... 120mm Spindle bore ... 91mm Tool turret ... 12/12 Axis X ... 260mm Axis Z ... 510mm Spindle speed... 0-5000/min. Rapid traverse of the X axis ... 25m/min Rapid traverse of the Z axis... 30m/min Rapid traverse of the Y axis ... 12.5m/min Axis C ... 360° Main engine power... 22kW L x W x H ... 3420 x 2041x 2444 mm Machine weight ... 6600kg The machine is in good condition, possible to test under electricity.

Type CK-3000B Height of working table 800mm Working depth 80mm Working length 2500mm Motion controller Loran Max traveling speed 150m/min Max working speed 105m/min Control system TPR Spindle power 2x 2.2 kW Spindle speed 0-18000 rpm Transducer Jiale Air pressure 0.6-0.8 Mpa Motors power 750+750+400W Transport dimensions 4200x1700x1400mm Weight 900KG Price 6499 Eur (EXW Jonava, Lithuania)

Stock number: 3845 CNC BED MILLING MACHINE Manufacturer: CME , Type: MB-3000 FLEX Reconditioned spindle Year of construction: 2006 Specifications: Spindle speeds 2200 rpm Boring Spindle dia. 150 mm

3000 B CNC circular saw blade grinding machine was built in 2023 in Poland. The brand-new machine, equipped with intuitive software and a CNC controller with memory for 128 programmes, is used to sharpen the following types of circular saws, mainly used in the furniture industry for cutting laminated chipboard: – flat circular saws (GM) – alternately mitre circular saws (GS) – trapezoidal circular saws (GB) – trapezoidal-flat circular saws (GA) The 3000 B CNC circular saw sharpener allows for grinding tooth rake angles and tooth face angles in a single pass without removing the saw blade. The grinding wheel arrives at the tooth plane at two feed speeds – the slower feed increases grinding precision, while the faster one reduces sharpening time by up to half. To ensure precise feeding of the tooth under the grinding wheel, a claw feeder is used, which prevents the grindin ...

Bowl cutter Kilia 50l 3000 RS Express 50 liter stainless steel bowl Operation via push button 2 knife speeds 2 bowl speeds Mixing speed forwards and backwards 6 pcs. knife head 3 pcs. knife head Rated power 15 kW, total rated current 33 A Operating voltage 380 V / 50 Hz Weight approx. 950 kg

Ref. No.: 850162 Item No.: 40219 F. Nr: 193 Connection: 380 V /50 Hz

Inv. Num. : 7225 Type: SBM - XS 300 G1E1 Producer: LISSMAC Created: 2015 Parameters: Hours: 166 Maximum sheet plate width: 15 mm Weight: 1400 kg

Control: TMJ Max.cutting range: 360 x 305 mm Cutting speed:10 ? 100 m/min Saw band dimension: 3660 x 27 x 0,9 mm Automated bar shift: YES Coolant tank:100l Chip conveyor: YES Made in Czech Republic

table length: 1300 mm table width: 800 mm stroke height: 1015 mm weight max. in kg: 3000 kg : 220 mm connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 300 mm : 300 mm : 300 x 260 mm saw band length: 3920 x 34 x 1,1 mm table height: 780 mm band speed: 20 - 100 m/min total power requirement: 3,7 kW weight of the machine ca.: 1,65 t dimensions: 2,0 x 2,05 x 1,7 m PROMOTIONAL PRICE 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) co ...

Builder: WILLIBALD Model: MINISHARK MS 3000 Engine: PERKINS 130 kW (180 HP) Data: L. 8.250 x W. 2.500 mm x H. 3.300 mm Year: 2017 Operative Hours: 3.900 h Hourly Production: 40 m³/h Shredding System: 18 HAMMER Rotor Data: D. 700 mm Fuel Tank: 140 L Weight: 9.000 kg Price: ON REQUEST!

Gebhardt roller curve conveyor 2 x 90° LINKS 610-500-300 with straight frame RA1210 The Gebhardt wheel curves with straight gear are from 2007 and are in a good (used) condition. It has a central engine of the SEW brand. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Gebhardt Type: 1070.113 Built: 2007 Condition: good (used) Engine: fully functional Angle: 2 x 90° with straight frame Outer width: 610 mm Clamping length: 500 mm Length straight line: 300 mm Rolls Type: G6/50 sliding bearing with conical plastic Molding Power rating: 30 kg/m Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2/1.15 Conveyor speed: 0.35 m/s Weight: 110 kg Scope of delivery: without supports (if necessary please enquiries) Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoic ...