reiser mb maschinenbau used for sale

Rotary vane vacuum pumps single stage Oelumlaufgeschmiert Status: required, verified, functional Manufacturer: Rietschle Type: CLFH 141 (01) Engine: 400V Resources: Mineral oil Nominal: 140 m ³/h Discharge pressure: < 0.5 mbar (ABS.) Includes: user manual Oil (mineral oil) delivery: ex works

Series No. 50871101, Flatepile Feeder, 4 Pockets, Delivery

The machine is in good technical condition. Clamping surface of the table: 1760x500 mm Steering system: Heidenhain 17K011 Tool changer: automatic - 36 tools Max. workpiece weight: 600 kg Clamping system: DIN69871-A SK40 Number of revolutions: 40-8000 Machine dimensions: approx. 3800x2900x3100 mm Machine weight: 9500 kg By prior arrangement, the possibility of a tour in progress.

Mixing tank 80 liters REITZ MB80 for bulk materials Used open mixing tank approx. 80 liters with geared motor 0.75 KW and inclined blade stirrer 700 mm Application: Mixing of powdered materials. Slow-running, high-torque agitator for powdered mixes. High torque with low energy consumption. Stirred tank: Mobile mixing tank made of stainless steel with bottom slide for draining the mix. All boilers are refurbished and clean. Capacity approx. 80 litres Geared motor: Geared motor Lenze 0.75 KW, 230 / 400 V, 3 phases, 50 Hz, 1410 rpm, IP 55, ratio i = 56, 25 revolutions per minute at shaft output. With motor protection plug to protect the geared motor. Shaft: stainless steel shaft diameter 20 mm, length 500 mm, material 1.4571 Agitator: Double-bladed inclined blade stirrer, diameter 700 mm, material stainless steel 1.4571

Bush two stage pumps stand: data pump status: type: BNV 1000 A Vacuum: mbar (abs.) 0.005 Data backing pump: Type: NC0400B suction volume: 400 m³/h Discharge pressure: 0, 05mbar (ABS) Data booster: Type: WV1000B Suction power: 1000 m ³/h Discharge pressure: 0, 005mbar (ABS) Condition: tested, serviced (good condition) Includes: vacuum pre-filter, oil filling Warranty: 3 months; ready for operation

Roller tracks for cross promotion of wood Width 110 mm Enable roles Approx. 3 m long rail pieces with requirements for package promotion 6 piece Weight 600 kg In good condition, ready to use Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Key data: 700 °C, 2400 mm, 6500 mm

1 piece gas-fired chamber furnace with air circulation and bogie hearth Type: KLWg 220/180/650 for unsupervised operation for three-phase three-phase current 400 volts/N, 50 Hz. for temperatures up to max. 700°C for natural gas "H" External oven dimensions approx. Width in mm: 3400 Width with control cabinet in mm: 3800 Height in mm: 3200 Length with inserted. Bogie hearth in mm: 8000 Length with fed. Bogie hearth in mm: 15500 clear interior dimensions approx. Width in mm: 2400 Height over beams in mm: 1800 Length in mm: 6500 Volume in m³: 25,7 Batch dimensions max. Width in mm: 2000 Height in mm: 1500 Length in mm: 6100 Weight max. in kg: 20000 Connected loads approx. Number of rule groups: 4 Number of burners: 8 Total burner power in kW: 720 Burner air blower in kW: 5.5 Circulating motor in kW: 22 Number of circulating motors: 4 Bogie hearth d ...

Offered here is a vacuum evaporator for wastewater from Korrotherm, model K750. Suitable for chloride-containing and aggressive wastewater Completely technically overhauled and not put into operation since then - like new The Korrodest evaporator system provides a fully automatic low-temperature evaporator system, which is largely autonomous, i.e. without permanent monitoring. by operating personnel. The plant is designed for the processing of diluted, even chloride- and sulphur-containing rinsing water from surface technology. The incurred Rinsing water is thermal, in a vacuum of about 50 mBar, corresponding to about +35°C evaporated and separated into two components. On the one hand, in the distillate, which can be produced up to 98% of the volume flow rate, and on the other hand into the concentrate, which can be concentrated to a density of approximately 1.3 – 1.35  ...

Rotary vane vacuum pump Status: Generalueberholt; Asgood Performance: 12 months Lierfertime: from stock Manufacturer: Busch Type: R5 RA 165D Engine: 400V equipment: Mineraloel o. Syntetisches Oel Nominal suction systems: 160m3/h end pressure: 0.5 mbar (abs .) Oil filling (mineral oil); Vacuum suction filters delivery time: from stock (intermediate sale reserved) If you have any questions about vacuum technology, we are happy to provide you with information; ready for use

Good working conditions

Rotary vane vacuum pump Status: Generalueberholt; As capacity: 12 months Yield time: from stock Manufacturer: Busch Type: R5 RA 255D Engine: 400V Equipment: Mineraloile Nominal suction digesters: 250m3/h Final pressure: 0.5 mbar (abs.) Zubehoer: User Manual; Oil filling (mineral oil); Vacuum suction filters delivery time: from stock (intermediate sale reserved) If you have any questions about vacuum technology, we are happy to provide you.

Good working conditions

Good working conditions

Centrifugal compressor in landfill gas use. Technical data sheet located as an attachment. The compressor is located in a very good condition, is until end of July 2018 in the operation and is very robust (casing). Pressure difference 180mbar and 15 kW drive motor. Radial blower used for landfill gas utilization. Technical specification see attached data sheet. The blower is in good technical condition and still in operation on a bio-gas plant in Germany untill end of July 2018. Pressure drop 180 mbar with 15kW electrical drive.

Description Three-phase suction unit Voltage: 400V Power: 5.5 kW Vacuum: 44 kPa (440 mbar)

Steep conveyors for Earth material with rubber strap in dismantled condition Built in 1947 Weight approx. 680 kg Length 7 m Belt width 500 mm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

grinding length:500 mm centre height:200 mm total power requirement:7 kW weight of the machine ca.:7 t

centre height:500 mm centre distance:2000 mm control:CNC Grundig Numerik total power requirement:400 V, 50 Hz, 22,5 kW weight of the machine ca.:3300 kg dimensions of the machine ca.:2500 x 4000 x 2400 mm

all stainless steel belt width 640 mm natural gas 16 kW 414 kW heat capacity 3 x 400 V gas pressure 30 mbar

- Three mobile knives units for additional knife fold - Can be used on combi or buckle folders for various configurations ( Mbo, Stahl, etc. )

Overview The FAMIX 30000 2 - components mixer was built in 2003 by the German manufacturer H. FALTERBAUM FAMIX-MASCHINENBAU GMBH. The machine is out of operation since seven years and therefore needs some replacement like gaskets. Technical Details  Capacity: 30,000 l/h Siemens S7 control Two components (water, syrup, CO2)

CONTROLS   PLC SIEMENS S7 300 Main spindle DIN 55022 size 11 Crosshead spindle DIN 55022 size 8 Drive power main spindle 30.7 KW Drive power hydraulics 33.5 KW Main spindle speed 350 - 1000/min Workpiece diameter max. 650 mm Crosshead stroke 300 mm Ejector stroke 80 mm Crosshead contact force 400 kN

New gas pressure regulator, Itron, DN80, RR16-80-82-12N-SL-IZN.1 Manufacturer: Itron Type: RR16-80-82-12N-SL-IZN.1 - DN80, PN16 - W DSO 35 mbar - 250 mbar Condition: The gas pressure regulator was purchased from a spare parts warehouse of a company and is still in its original packaging Dimensions: 43cm x 40cm x90cm high Weight: 63 kg

Description suction quantity 132 [m3/h] max suction pressure ± 100 [mbar rel.] Motor 3.3 KW

There are three identical machines available, connected load: 0.25/0.37kW, weight: 250kg.

Blade length: 5600mm, opening width: 1000mm, band length: 2800mm, an inspection is possible.

Inclination: 15°, an on-site visit is possible.

Exhaust fan Tube ø 350 mm Fan ø ± 750 mm Engine 11 kW Built in 1995 Weight approx. 190 kg L x W x H: 100 x 80 x 100 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Suitable for rigid foam, sawing width: 1250mm, max. sawing height: 200mm, max. speed: 12m/min, with controls cabinet or saw blade.

6 identical timing belt conveyors MK Technology Group are available. Total load: up to 250kg, speed: up to 60m/min. On-site inspection is possible.

Weight: 5.65t.

Connected load: 30kW, length: 9060mm, width: 4000mm, height: 2900mm, includes ultrasonic cutting unit, conveyor unit, switch cabinet, protective elements, spare parts and documentation, on-site inspection is possible.

Stock number: UG6261 Used stainless steel vacuum pump by NSB Gas Processing AG (Switzerland) type PMZF 2507 D3 X3 in Ex design (EEx e II T3/ATEX). Pump is driven by el motor 6.8 kW, 1500 rpm, 400 V, 50 hz. Working output up to 150 m3/h and suction pressure up to 1000 mbar. Pump new 2011.

Description Rotary vane pressure vacuum pump Rietschle KTA 80 .1 YOC 2006 max. delivery quantity 80 [m3/h] max. pressure ±600 [mbar rel.]

Max. printing width: 1610mm, max. roll weight: 45kg, length: 2775mm, width: 700mm, height: 1392mm, weight: 166kg, with ink supplier Bulk System MBIS3, for the use of paint bags up to two liters, was hardly used.

Stroke: 800mm, max. rotational speed: 1200/min, without documentation or accessories, an inspection is possible.

Saw motors with flanges 2 pieces brand new 2 pieces used, re-edited in 2012 1.5 kW Flat rate for 4 engines EUR 360.00 The engines are in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Suction fan Pipe of 300 mm Engine 4 kW The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Pyrolyx Pyrolysator Thermal Double Screw Reactor Model 1-FD07 Reactor for the depolymerization and pyrolysis of rubber granules Capacity rubber granules (typical): 1100 kg/h media Compressed air: max. 7 bar Instrument air: max. 7 bar CO2 low pressure: max. 1.3 bar CO2 medium pressure: max. 3.5 bar specifications Dimensions of the system: 14600 x 1540 x 1500 mm Screw diameter: 790 mm Weight: about 20 tons. (metric) Product Contact parts: 1.0473 Pressure tested at 200 mbar Design -100/+200 In operation -80 Temperature maximum: Up to 550°C Operating temperature: 350°C-550°C Power requirement Start-up: 180 kW Energy demand Operation: 140 kW Seal: Gland seal(r) with graphite seal Max sound pressure level: 80 dBA Bearing flushing: with CO2 at 300 mbar engine: Voltage: 400V, AC Frequency: 50 Hz Power: 2.2 kW Protection class: IP54 Frequency transmiss ...

Dough kneading machine Model: MBT SP 6 Protective grille with shutdown Table machine Spiral kneader for max. 6 kg. dough Speed infinitely adjustable DGUV V3 tested Connection 220V Dough machine NEW Come to our Milbrandt Outlet with show backroom and many appliances!

Volume : 618 ltr. Material : areas in contact with the product in stainless steel Working pressure : 3 bar Working pressure jacket : 3.5 bar temperature: 145°C Temperautr jacket : 148 ° C Vacuum drum : 50 mbar;

Dough kneading machine Model: MBT SP 6 Protective grille with shutdown Table machine Spiral kneader for max. 6 kg. dough Speed infinitely adjustable DGUV V3 tested Connection 220V, 400 watts Dough machine NEW with 12 months warranty Come to our Milbrandt Outlet with Schbackstube and many devices!

Reference Num.: 3527 Brand: MBO Type: T 500 Construction year: 1995 Available: directly Status: In production Location: Deutschland Equipment: - Format 50 x 70 cm

Dough kneading machine Model: MBT SP 10 Protective grille with shutdown Table machine Spiral kneader for max. 10 kg. dough Speed infinitely adjustable DGUV V3 tested Connection 220V, 400 watts Dough machine NEW with 12 months warranty Come to our Milbrandt Outlet with show backroom and many appliances!

Vacuum pump,Busch type RC0063,1,5 kW motor,vacuum 20 mbar.

Capacity: 6,000 - 8,000 cups/hrs Number of tracks: 4-lane longitudinal runner Closure: Sealing Schuy + Folmeg Maschinenbau GmbH is happy to overhaul this system for you. All electrical and pneumatic components are brought up to date and mechanical components are overhauled and 80% of new quality is available. You will also receive a 1-year warranty for the system. Please contact us.

"Power: 6,000 - 8,000 packets/hr current package format (LxWxH): 80 x 80 x 80 mm Weight 500 g Foil: aluminum, parchment Date print: Embossing Connection values: 380 V; 7.86 A; 3 KW Air requirement: 500 L/hr Dimensions (LxWxH): 1.8 m x 1.4 m x 2 m Other: - case painted white - Product direct inlet Schuy + Folmeg Maschinenbau GmbH is happy to overhaul this system for you. All electrical and pneumatic components are brought up to date and mechanical components are overhauled and 80% of new quality is available. You will also receive a 1-year warranty for the system. Speak"

"Power: 5,000 - 8,000 packets/hr current package format: 100 Height: 70 mm maximum package size: 100 mm Height: 90 mm Date Print: Stamp Dimensions (LxWxH): 2 m x 1.3 m x 1.8 m Connection values: 380 V; 11.84 A; 4.5 KW Other: - Drain belt set up for product direct inlet - Intermediate leaf support provided - Case painted white Schuy + Folmeg Maschinenbau GmbH is happy to overhaul this system for you. All electrical and pneumatic components are brought up to date and mechanical components are overhauled and 80% of new quality is available. You will also receive a 1-year warranty for the system. Speak"

Dough kneading machine Model: MBT SP 6 Protective grille with shutdown Table machine Spiral kneader for max. 6 kg. dough Speed infinitely adjustable DGUV V3 tested Connection 220V Dough machine NEW with 12 months warranty