reinforcement used for sale

Reinforcement sleeve set, reinforcing sleeve PARKER 8 TIZ.375-SS ( 8TIZ.375-SS ) Pipe diameter (inside): Ø 10 mm Pipe diameter (outside): Ø 12 mm Reinforcement sleeve set consists of 30 sleeves ! stainless steel, unused ! Dimensions(single sleeve): 12 x 12 x 16 mm Dimensions: 100 x 80 x 20 mm

Reinforcement sleeve set PAGUS VSH 15 x 12 Inner diameter: Ø 12 mm outer diameter: Ø 15 mm Hull diameter: Ø 13.5 mm Sleeve length: 18 mm Material: Brass Reinforcement sleeve set consists of 100 pieces ! New ! Dimensions: 150 x 100 x 50 mm

MURAT - NR 241 - cutting, milling and screwing of reinforcement steel MURAT - KD 658/20 - 4 head welding machine MURAT - CN 770/20 - corner clean machine Capacity Min. 100 windows / 8 hours, Max. 120 windows / 8 hours All these machines make automatic production line for PVC systems. The price includes these three machines above and transporter of the frames between welding and corner cleaning. MURAT - NR 241 - Details: All sawing, routing, drilling, reinforcement steel screwing, marking and end milling operations on PVC profiles are gathered in one machine controlled by computer. Stacking of 10 profiles (max. 6,5 m length). Manual barcode labeling system integrated with single-lines. Servo controlled automatic swing of the saw to all angles between 30° and 150° with 0.1° accuracy. Drain slot routing, drilling and routing at variable angles. Automatic scr ...

Concrete tester Hilti Ferroscan FS10 Monitor RV10 Scanner RS10 Type Ferroscan FS10 consisting of: -Monitor RV10 -Scanner RS10 -Charger TCU12H -Battery Pack RB 10 -in shock-resistant plastic case The memory of the device is defective. The device works properly, but as soon as you turn it off, it loses the recorded data. The portable Ferroscan system is used for large-scale, fast and simple -Detection and identification of reinforcement iron in Concrete substrates -Measurement of overlap, diameter and position of Reinforcements in concrete substrates e.g. for testing the reinforcement in concrete parts, Walls or ceilings -Measurement of safety-relevant purposes, e.g. for structural engineering -Additional advantage: By locating the reinforcements avoid accidents and damage caused by hits iron, pipes and electrical wires." Bcsepogfc3 The Ferroscan system i ...

NOMAPACK® WS is the innovative transport protection for windshields and glass products. The additional inner hole reinforcement prevents sharp edges from piercing the profile and thus provides perfect protection for your product. Patented glass edge protection Unique special profiles reinforced with internal holes Efficient protection against scratches and breakage Applications: Glass edges Windshields Heavy, sharp-edged objects Shipping is paid for by the customer, otherwise we are happy to come and pick it up. If you have any further questions, please do not hesitate to contact us or give us a call. ------------------ NOMAPACK® WS is the innovative transport protection for windshields and glass products. The additional inner hole reinforcement prevents sharp edges from piercing the profile and thus provides perfect protection for your product. Patented gla ...

It is a thermally insulated lightweight hall (built in 2008), whose hot-dip galvanized supporting structure and sandwich cladding together with various equipment can be reused. DIMENSIONS according to construction documents: Covered area: 375.00 square meters; Width of the hall: 25.00 m AK wall; Length of the hall: 15.00 m AK wall; Frame spacing: 5.00 m MM frame supports; Eaves height: 5.24 m at the intersection of roof and wall; Ridge height: 7.30 m building height; Purlin spacing: 2.50 m floor area / 2.54 m roof pitch; Wall beam spacing: 2.50 m; Roof pitch: 10 degrees, symmetrical gable roof; LOAD ASSUMPTIONS: Wind load: 0.59 kN/m2 (DIN 1055-4 March 2005). Snow load: 1.25 kN/m2 (DIN 1055-5 July 2005). Seismic zone: 3 (DIN 4149-4 April 2005). STRUCTURE: The primary structure consists of hot-rolled and hot-dip galvanized IPE solid profiles. Main f ...

Number of boring spindles: 3 St. Number of tools: 1.3/4.1. St. Spindle diameter: 50,40 mm Spindle length: 120,320,125 mm weight: 2500 kg loading dimensions L x W x H: 3800x1400x2000 mm table length: 3470 mm Weinig Univar 6 P In order to sell ---------------------- Operating voltage: 380 volts, 50 periods. For milling around windows, doors and similar with uneven edges Profiles. Arrangement of the aggregates: 1. Synchronous spindle on the right, pneumatically clocked. 2. Profiling spindle on the right 3. Fitting spindle Profiling spindle suitable for holding several tools one on top of the other. Spindle movement pneumatic. The 1 spindle works in synchronization for tear-free milling. Respectively This spindle plunges the last 100 mm of a frame end with the Insert the appropriate tool into the wood to prevent tearing at the frame corners avoid. Machine stands, tables, stops: Machine body  ...

Type: WHN 13A Parameters: 130 mm, 2000 mm Manufacturer: Tos Čelákovice Year of production / SO / GO: 1979 / - / - Description: Heidenhain control system Cross arrangement of beds Four axes + rotary table Retractable working spindle Machine designed for universal engineering production Heidenhain control system Axis strengthening hydraulically Machine parameters: X-axis 3510 Y axis 2040 Z axis 1200 W 800 axis incl. reinforcement, 600 without reinforcement Clamping surface of the table 1800 x 1800. The machine is connected, with the possibility to test. Bearings and damaged wheels must be replaced in the headstock.

Cat No. 12-2800(132) New made of V2A - KUBISCH - pressureless Standard equipment with: • External dimensions: 1000 x 1000 mm • Height tank body: approx.1000 mm • Height tank with feet: approx.1480 mm • Material V2A AISI 304 - Material thickness: tank 1.5 mm / feet 2.5 mm / transport eyelets 2.5 mm • Weight: 130 kg • Capacity: 1000 litres • Top manhole 400 mm - lid with 4 screws and clamping bracket with screw and fermentation spandy NW 50 • Underbody deep drawn • with residual outlet DN 65 • Corner reinforcement 150 mm/150 mm from bottom to top tank • Surface: marbled outside - inside 3D • stackable - transportable with hand-held trucks • In the filled state of: 1 + 1 • In the empty state of: 1 + 3 Supplement/piece (prices on request): Disc valve DN 65 Disc valve DN 50 Blind cap Reduction piece NW 65/40 or 65/ ...

Cat-Nr. 09-2090 new cubic Standard Features: • Outer Dimensions: 1050 x 1050 mm • Height Body Tank: approx. 1550 mm • Height Tank incl. Feet: 2000 mm • Material AISI 304 – Material Thickness: Tank 1,5 mm / Feet 2,5 mm / Hooks for Transport 2,5 mm • Weight: 154 kg • Volume: 1500 Liter • Manhole on the Top 400 mm - Lid with 4 Screws and Clamps with Bunging NW 50 (as per Photo below) • Bottom in Symmetrical Shape • Outlet Discharge DN 65 • Reinforcement 150 mm in each Corner of the Tank • Surface: outside marbled – inside IIID • stackable – 3 in empty, 2 in full • transport possible with Hand-Lift or Fork-Lift Surcharges / unit (upon request): Butterfly Valve DN 65 Butterfly Valve DN 50 Closing Cap for Outlet Reducing Unit NW 65/40 or 65/50 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-909052 ...

Cat.-No. 15-00013 in a very good condition Material: V2A - AISI 304, 1.4301, Material Thickness: Tank Body: 1,5 mm - Feet: 2,5 mm – transport lugs: 2, 5 mm Surface: inside: IIID, outside marbled Upper Body: Manhole Lid DN 400 with 4 Screws with clamp Thread Connection DN 50 Tank Corner Reinforcement 150 mm / 150 mm Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Total Height: 1750 mm Height: 1250 mm Outer Dimensions: 800 x 1200 mm Weight: 130 kg The price is for one unit. Surcharges/unit (price upon request): Butterfly Valve DN 65 Butterfly Valve DN 50 Closing Cap for Outlet Reducing unit NW 65/40 or 65/50 All prices are valid Ex-Works, excl.VAT F ...

Cat No. 14-00221 Eurolux Storage and Transport Tank Cubic - 750 Litres in AISI 304 stackable – NEW Multi-functional Tanks - pressureless Material: V2A - AISI 304, 1.4301, Material Thickness: Tank Body: 1,5 mm - Feet: 2,5 mm – transport lugs: 2, 5 mm Surface: inside: IIID, outside marbled Upper Body: Manhole Lid DN 400 with 4 Screws with clamp Thread Connection DN 50 Tank Corner Reinforcement 150 mm / 150 mm Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Height body tank: 800 mm Total Height: 1380 mm Outer Dimensions: 800 x 1200 mm Weight: 110 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karl ...

The high-load timber-beam formwork with a system grid The pre-assembled standard elements of Doka timber-beam formwork FF20 combine the advantages of timber-beam formwork with the grid-related advantages of a framed formwork system. Their very high load-bearing capacity offers a new degree of freedom when it comes to fulfilling architectural specifications in a cost-effective way. FF20 is suitable for fair-faced concrete categories SB1 to SB4, as defined in the DBV Code of Practice. High pouring rates made possible by extra-strong components Up to a pour-height of 3.60 m, only two 20.0 form-ties are needed, thanks to the 80 percent higher load capacity of the I tec 20 composite formwork beam compared to conventional H20 timber formwork beams the stiff FF20 tec walings WU14, with their welded-on plates Maximised utilisation of equipment and ease of handling Lowers commiss ...

3 tube feet standing stainless steel container made of V2A, 1.4301 WSt Containers with upper edge reinforcement Manufacturer: API Schmidt-Bretten Content: 300 LTR. Diameter: approx. 660 mm Zyl. Height: 900 mm Total height with feet: approx. 1,560 mm Open top containers. Container with lower convex base on the cover: 1 threaded socket DN 50 1 socket ½ " in the middle of the subfloor: 1 spout front pulled about NW 50 In very good condition!

Manufacturer: Deltax Holder: Hydraulic holder Dimensions (L x W x H): 2010 x 902 x 1500 mm Knife length: 610 mm Number of strokes at 1/4 opening: 40 cuts at quarter opening Number of strokes at full opening: 12 cuts at full opening Measuring opening: 330 mm Cutting force: 206 tons Drive: 11 kw/32 CEE plug Weight: approx. 2250 kg Deltax_DTX600S with hydraulic holder (New machine) The DTX 600S has 20% more cutting power than the standard Deltax DTX600. This was achieved by installing a larger cylinder and using a smaller second pump. A larger first pump is used to maintain the same cutting speed. All other modifications are used to amplify the machine to handle the additional power. The weight gain due to the reinforcement modifications and the larger pestle is about 250 kg. Alternatively: Deltax DTX600 Difference Cutting force: 172 tons | Weight: 2000Kg | All othe ...

Used standing on 3 feet of pipe stainless steel container made of V2A, 1.4301 - WSt - container with upper edge reinforcement Content: 300 LTR. Diameter: approx. 660 mm Zyl. Height: 900 mm Total height with feet: 1.500 mm Open top containers. Container with bottom cone base. on the cover: 1 threaded socket DN 50 1 socket ½ " in the middle of the subfloor: 1 spout front pulled about NW 50 otherwise com. photo in very good condition!

Painted ceiling supports 3.60m Steel construction supports with a red dip bath paint. Decoupling system - this enables a quick disarming of the support with little effort Foot reinforcement - by mounting a stronger pipe near the footplate Due to holes every 100 mm in the inner tube, the extension length varies between 50 and 500 cm Compatible with most of the accessories of other formwork Technical data: Inner and outer tube made of steel S235JR according to UNI EN 10219-1 / 2 concealed threads, step 8 mm, for adjusting the length Threaded pins directly on the outer tube, or welded, manufactured by rolling, i.e. without rejecting the material Lower plate available in flat or curved version Upper plate available in three versions (flat plate, with fixed cross or "U"-shaped) Highly resistant safety hook for fastening between inner and outer tube Hand-squeezing for safe con ...

Saw blade grinding machine Schmidt Tempo ECE 45 2019 technically overhauled CBN deep-cut process For regrinding and for the production of circular saw blades with angular and arched tooth according to tooth shape A, AW, B, BW, and C according to DIN 1840 for circular saw blades from 20 mm to 550 mm. â?¢ Clock and grinding time display â?¢ automatic, motorized central lubrication â?¢ Centering holder with centering bolts 16 mm . . . . . . . . . . . . . . . . . . â?¢ Clamping nut with mech. Clamping force reinforcement â?¢ Saw blade holder â?¢ Preparation for grinding with oil â?¢ Centering rings as needed â?¢ LED machine light â?¢ Program for round grinding â?¢ Reporting light â?¢ Tool set

GIRO net packaging machine, type Girplus RS Classic Attractive appearance due to the central message on the pack header. Possibility to make the header with 1 or 2 flaps (see Picture 1) or without flaps (see Picture 2) Possibility to include or not include handle holes. Allows the use of registered Girfilm at both, one or none of the sides. Flexibility to utilize 90 or 119mm header width Handles up to 3kg without needing inner or outer reinforcement bands. 100% recyclable. Net and film fully made of polyethene. No additional raw material is used. Uses the same consumable materials for all different packaging styles. Thus affording the packer a stock cost-saving and facilitating stock management. Allows the use of self-adhesive labels up to 78 x 36 mm The Girplus-R welding machine offers the packer the possibility of making different bag styles with just one machine. RECOMMEN ...

table length: 2400 mm table width: 1200 mm table height: 850 - 900 mm weight of the machine ca.: 0,65 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,45 t dimensions: 2,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height: 850 - 900 mm weight of the machine ca.: 0,45 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. Very sturdy base, so the Table can be moved with a pallet truck. The accessories shown are optional! Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2900 mm table width: 1400 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,9 t dimensions: 2,9 x 1,4 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Process tank 450 l · vertical tank · pressure tank up to 2 bar · main tank made of stainless steel AISI 316Ti · tank insulated with mineral wool with a thickness of 50 mm in the cylindrical part and on the bottom end outer jacket made of stainless steel AISI 316Ti, thickness 2mm · bottom and top bottom pressed DIN 28011 · heating jacket for glycol · circulation pump · heating medium temperature sensor · expansion vessel of the heating system electric heaters - 5 pcs. 4.5kW/400V · control box: controlled by the heating system and the operation of the stirrer · heating medium supply connector DN33.7 · connector for receiving the heating medium DN33.7 Equipment: · manhole DN300 (2 bar) with a safety sensor drain connection (heated) filling connector (heated) · filling level sensor connector · PT-100 temperature level connector · safety valve · Redox + e ...

The machine is already in Poland with us on site. , a drilling rig from the well-known Swedish brand Sandvik. Used for rocks mainly underground but can also work on the surface. This model is An excellent tool for securing high workings and tunnels, ensuring a safe working environment and constant access to the workplace. The universal screwdriver head design allows all common screw types and combinations to be used, with bolt lengths of up to 6 meters (20 feet), depending on the screwdriver head alternative chosen. The telescopic boom allows you to mount several rows of bolts without moving the machine. An optional second boom – screen holder or basket boom – increases productivity and versatility. Additional automatic functions allow the operator to focus on safe, fast and efficient rock reinforcement. The air-conditioned, soundproofed and tilting cab further enhances safety an ...

table length: 2400 mm table width: 1200 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,64 t dimensions: 2,4 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional Surcharge for 25mm material thickness: 340, -EUR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mm table width: 1500 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,5 t dimensions: 1,5 x 1,5 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2990 mm table width: 1490 mm table height: 850 - 900 mm weight of the machine ca.: 0,8 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 1200 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,32 t dimensions: 1,2 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used automatic packaging line by MIFLEX-MASZ model SP-200, new 2014. Automatic packaging line (recently used for packaging herbs and teas in shaped sachets) with automatic packaging in doypacks. Can also be used for other types of assortment. It consists of a packer, sachet packer with feeder and dispenser. Built on a self-supporting frame with protective covers. Equipped with independent temperature control of each sealing jaw and infinitely variable speed control. Emergency conditions are visualised on the control panel . All product contact parts are easy to dismantle for cleaning and replacement, made of P.Z. H. certified materials. Sachet dispenser AS-20 Equipped with : - unwinding of the packaging material - guide roller system - volumetric dispenser with adjustable portions - sealing system - shaped sachet punching system - control cabinet - main drive with adjustab ...

table length: 2900 mm table width: 1200 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,77 t dimensions: 2,9 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 900 mm table load: 2000 Kg weight of the machine ca.: 0,24 t dimensions: 1,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mm plate thickness: 5,00 mm distance between columns: mm upper beam stroke: 350 mm stroke bending beam: 80 mm total power requirement: kW weight of the machine ca.: 7,50 t dimensions of the machine ca.: 4,20 x 2,90 x 2,30 m Furnishing - Upper beam stroke: 350mm - Motorized folding beam adjustment - controlled backgauge 1000mm (1500mm with repositioning) - Control Fm100 - Geissfusssatz divided height approx. 130mm - Sharp rail 45 ° - Bending bar: 15mm, 20mm + reinforcement bar 35mm - Radius rail R16mm, length 2000mm - Radius rail R30mm, length 1000mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mm table width: 1490 mm table height: 840 - 890 mm weight of the machine ca.: 0,4 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

153,500 LITRE STORAGE TANK / WINE TANK / AGITATOR TANK WITH SIDE MIXER, UPRIGHT MADE OF V2A MJ UNI-RILL https://eurolux.de/product/24-0507euba-153500-liter-lagertank-weintank -ruhrwerkstank-mit-seitlichem-ruhrwerksmixer-stehend-aus-v2a Tank top floor: Conical bottom 8 reinforcement profiles 4 crane eyelets Cathedral central ⌀ 500 CIP cable DN50 Cylinder: Manhole 440 x 340 mm Tasting tap DN15 Clearance drain with butterfly valve DN 65 lockable exterior door with propeller agitator - Tank 1/2 agitator right (Stelzer with Siemens motor) - Tank 2/2 agitator left (Stelzer with Siemens motor) Tank underbody: Flat bottom with 3% slope with residual drain pipe pulled forward with butterfly valve DN 65 Foot ring with 8 mounting flanges

table length: 1200 mm table width: 800 mm : 28 mm table height: 450 - 800 mm : 500 kg weight of the machine ca.: 0,8 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Ribbed underside for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1590 mm table width: 1490 mm table height: 840 - 890 mm weight of the machine ca.: 0,4 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

17,000 LITRE STORAGE TANK/WINE TANK, RIEGER, UPRIGHT MADE OF V2A https://eurolux.de/product/24-0513euba-17000-liter-lagertankweintank-r ieger-stehend-aus-v2a MJ UNI-RILL Tank top floor: Sloping floor with 3 % floor slope 4 reinforcement profiles 2 crane eyelets Threaded socket DN65 reduced to DN50 central downward drawn CIP cable DN50 connection DN 50 front Cylinder: Level indicator with strip and scale Tasting tap DN25 Clear drain with angled seat valve DN 50 Tank underbody: Cone bottom with residual drain pipe pulled forward in the middle with disc valve DN 50 tank wall 4 feet with domes - height adjustable with washers

Hydraulic pressure: 200 bar, with documentation and length stop, on-site inspection is possible, was used for cutting steel reinforcement pipes for plastic profiles to length, the machine has currently been standing under cover in an outdoor storage facility for two years, the linear guides are affected by rust film, a function test cannot currently be carried out.

table length: 1200 mm table width: 800 mm table height: 840 - 890 mm weight of the machine ca.: 0,3 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sliding table saw Circular table saw Circular saw Carpentry circular saw Format saw WH Machines Type: Z45 - 400E Professional New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 415 mm Cantilever table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the saw unit. Parallel fence up to 125cm with fine adjustment stable 50 mm round rod guide Parallelogram protection device with upper suction foldable away for vertical workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scorer wi ...

Sliding table saw Circular table saw Circular saw Carpentry circular saw Format saw WH Machines Type: C45-300E Economy New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 380 mm Grid carriage locking system with operation at the carriage end. Cantilever table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable swivel guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the saw unit. Parallel fence up to 125cm with fine adjustment stable 35 mm round rod guide Parallelogram protection device with upper suction foldable away for vertical workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up  ...

Elumatec cutting and machining center model SZB 620 Capacity: 120 units/change SBZ 610 (cutting + machining module for machining in pvc profials) SBZ 610 to SBZ 609 (manual steel insertion) with label printer SBZ 609 (reinforcement screwing, pvc + steel machining) Receiving table. The scope of processing in pvc: holes for drainage, venting, the importance of places for the installation of perimeter catches, milling holes for the installation of ventilators. Screwing steel reinforcements. The scope of processing in pvc + steel: holes for mounting the handle in the window, for mounting the post, holes for dowels. Very good technical condition, the machine has been working since 2017.

Vertical mixing silo. Approximate capacity 56 m3, dimensions Ø3.590x8.370 mm of total height. Made of steel S-235 and built in sheet thickness 3 mm with perimeter rings of reinforcement UPN-80, support structure by means of 4 pillars HEA180 mm braced with HEA-120 profiles, inner thread of Ø300 mm, step 200 mm with shaft tube of 114.3x6.02 mm placed in tube-jacket of Ø 355x4,78 mm, registration on the side for visit and inspection and in the lower tube for emptying in case of jamming or breakdown, equipped with safety system, 4 inspection sights, two upper ventilation vents, maximum level indicator FILSA type MS-1, transmission by pulleys and belts with 22 kW motor at 1,000 rpm with safety protections, discharge pipe 200x200 mm connected to inner screw jacket of mixer with manual closure at the outlet mouth, Nozzle at the bottom of cone for complete emptying of machine, cat ladder with ...

Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw WH machines Type: Z45 - 400E Professional New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 415 mm Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the sawing unit. Rip fence up to 125cm with fine adjustment Stable 50 mm round rod guide Parallelogram protection device with upper suction can be folded away for upright workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scoring blade with 1 ...

Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw WH machines Type: C45-300E Economy New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 380 mm Grid carriage locking system with operation at the end of the carriage. Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 300cm Electric height adjustment of the saw blade Stable swivel guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the sawing unit. Rip fence up to 125cm with fine adjustment stable 35 mm round rod guide Parallelogram protection device with upper suction can be folded away for upright workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 3 ...

Assortment thimbles, thimbles, thimbles, rope reinforcement, 180 pieces PAGUS 72x groove width 8 mm eye width: 20 mm, eye length: 32 mm 24x groove width 7 mm eye width: 18 mm, eye length: 28 mm 3x groove width 20 mm eye width: 38 mm, eye length: 60 mm 6x groove width 20 mm eye width: 45 mm, eye length: 72 mm 75x groove width 10 mm eye width: 24 mm, eye length: 37 mm material: galvanized steel new ! Dimensions ( packaging ): 300 x 200 x 150 mm

Replacement door for tool cabinet PAVOY 32370-E60-052-716 Dimensions: 855 x 440 x 20 mm Material: solid sheet metal with reinforcement bag Surface: smooth, with powder coating colour: RAL 7016 ( anthracite grey ) with cylinder lock and a key Replacement door for PAVOY tool cabinet model 32370 New ! Dimensions ( packaging ): 1100 x 520 x 100 mm

Replacement door for tool cabinet PAVOY 22337-E60-040-716 Dimensions: 545 x 345 x 20 mm Material: solid sheet metal with reinforcement pocket Surface: smooth, with powder coating colour: RAL 7016 ( anthracite grey ) with cylinder lock and two keys spare door and a. for PAVOY wall cabinet model 22337-040 New ! Dimensions ( packaging ): 550 x 350 x 50 mm

Replacement door set for hinged door cabinet, hinged door set, left and right door PAVOY 31310-E60-100-716 Dimensions: 1800 x 470 x 20 mm per door Material: Solid sheet metal with reinforcement pocket Surface: smooth, with powder coating colour: RAL 7016 ( anthracite grey ) with twist handle, locking rod and two keys hinged door set for PAVOY hinged door cabinet model 31310 New ! Dimensions ( packaging ): 1950 x 520 x 110 mm