Machine type: Pulse arc inverter welding machine Make: Rehm Type Megapuls 500 Attachment no. 228.434 Connection voltage 3 x 400 volts Setting range 10 – 500 amps Duty cycle 45 % d.c. at 500 amps 60% d.c. at 450 amps 100% d.c. at 350 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive Fuse 32 amps Dimensions L x W x H 1,030 x 600 x 1,300 mm Weight 175 kg Special accessories for filter attachment and wheels on the DV box Age approx. 10 years Condition: workshop-tested, good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauge ...
Machine type MIG/MAG welding system Brand Rehm Type Magnum 182 Supply voltage 230/400 volts Setting range 30 – 180 amperes Duty cycle 25 % ED at 180 amps 60% ED at 140 amps 100% ED at 100 amps Current setting 6 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive Fuse 16 Ampere Special device 2-stroke/4-stroke Points/Interval Dimensions L x W x H 760 x 320 x 580 mm Weight 53 kg Age approx. 20 years Condition workshop tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg, 8.0 mm Ø 1 can non-stick spray 1 piece hand shield 1 piece protect ...
Machine type MIG/MAG welding system equipped for steel wire in 1.0 mm Rehm brand Type RD 250 Connection voltage 3 x 400 Volt Setting range 35 – 250 amps Duty cycle 40 % ED at 250 Ampere 60% ED at 210 amps 100% ED at 170 amps Current setting 10 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive Fuse 16 amps Dimensions L x W x H 900 x 465 x 855 mm Weight 81 kg Age approx. 15 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 11 ...
Pacage set of REHM TIG WELDING MACHINE Welding torch 10m welding gun covers 3 different sizes look photos Suitcase for the complete set included Gun for electrode mma welding
A condensation soldering system Rehm is available. Process medium: Galden/perfluoropolyether, process chamber sealing: hermetic, profile control: injection principle, max. process temperature: approx. 240°C, filter: Galden filter, machine dimensions X/Y/Z: approx. 2200mm/1300mm/1650mm, weight: approx. 1250kg. Including various accessories and spare parts. Documentation available. An on-site inspection is possible.
Manufacturer : REHM Thermal Systems Model: VXS air 3500 (Type 734) Type: Convection Reflow Soldering Oven Quantity available: 2 units Condition: Used Key Specifications - Heating zones: 7 pre-heating zones / 3 peak zones / 4 cooling zones - Fan control: 1x top heating fan regulation - PCB width: 55 to 460 mm (with centre support from 65 mm), optional 508 mm - Chain pins: nickel-plated, 5 mm bolt length standard - Transport system width adjustment: manual (electric touchpad operation) - Heating: top and bottom heating - Display: flat screen and three-colour signal lamp - Control system: industrial PC with Ethernet network interface - Software: Vicon with Windows 10 Enterprise LTSC - Certification: CE compliant - Standby mode: Yes Find more here - / Contact us at -
This 6-axis REHM COMPACT-ARC 200 VM was manufactured in 2015. It features a robust welding robot cell, operating on 3 Ã 400 V AC with a mains frequency of 50 Hz. It can handle a maximum workpiece weight of 200 kg and requires 6 bar compressed air. Dimensions are 3990 Ã 2020 Ã 2300 mm, weighing 1720 kg. Consider the opportunity to buy this REHM COMPACT-ARC 200 VM welding robot. Contact us for more information.
Manufacturer: REHM Model:VXP Year of Manufacture: 2015 Machine type:vacuum reflow oven The center support can only be adjusted manually. Find more here - / Contact us at -
Manufacturer: Rehm Model: VXP+ nitro 3500 Year of Manufacture: 2014 Type of Machine: Reflow Oven Electrical Specifications Voltage: 3 × 230 / 400 V Frequency: 50 Hz Power Rating: 79 kW Current: 115 A Cooling & Gas Cooling: 20 l/min, minimum 2 bar Nitrogen Consumption: approx. 21 m³/h Exhaust Air: 400 m³/h Operating Pressure: 6 bar Dimensions & Weight Length: 6.4 m Width: 1.60 m Height: 1.80 m Weight: approx. 2 t Features & Equipment - SMEMA connection - Double track - Automatic width adjustment - Fast cooling unit - Program manager Find more here - / Contact us at -
A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A ...
Impulse Shielded Gas Welding Machine REHM Type RMP 400 Hybrid (REHM Mega Pulse)Pulse Welding Machine with Inverter Welding Power SourceFabr. No. 065013 built in 1998Power 400 Amp. = 60% ED 320 Amp. = 100 % EDEinfinitely variable adjustment rangeMains connection 400 Volt, 50 Hz, 32 Amp. Plug - separate 4-roll wire feeder with connecting hose pack meter - Digital display for voltage and current- Pulse welding device with single and double pulses - 2-stroke and 4-stroke welding device - 4 meter Binzel hose pack with
: 2009 current intensivity: 300 A wire dia.: 1 mm : sofort einsatzbereit : 239836 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
