regulator used for sale

Description: Specification: Large lockable flap. Comfortable gloves. Multifunctional cleaning sprayer. LED lighting. Air blower. Readable manometer. Adjustable air pressure regulator. Removable cleaning grid. Removable filter for dirt. Removable water collecting tray. Internal dimensions (LxWxH) 550 x 730 x 400 mm Interior volume 185 l Operating pressure 5-8 bar Weight 50 kg Dimensions L x W x H 0.7 x 0.6 x 1.35 m Since this parts cleaner has a thermostat that can heat the degreaser to 50 degrees Celsius, it is advisable to use this degreasing cabin in combination with the Eurol cold degreaser HF Plus. This degreaser has a higher flash point than the usual cold degreaser. weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 700 x 600 x 1,350 mm

Description: In this jet cabin is included as standard: blasting gun 4-piece nozzle set Set of gloves lighting Set of protection foils Foot pedal. Pressure regulator Microfiltering Interior dimensions 945 x 605 x 605 mm Operating pressure 2.2 - 5.5 bar Dimensions L x W x H 1.0 x 0.61 x 1.65 m Packing size max. 1300 x 1000 x 75 cm Machine weight approx. 0.09 t The system is delivered in black! Approx. Onsite Dimension. (l x w x h): 1,220 x 930 x 1,700 mm, weight approx.: 150 kg

Description: In this sandblasting cabin is included as standard. Front loader with two gas springs blasting gun 4-piece nozzle set Set Gloves. lighting Set protective films Foot pedal. pressure regulator Extraction system microfilter. original packed Inner dimensions 1170 x 880 x 825 mm Operating pressure 8 bar Dimensions L x W x H 1.33 x 1.24 x 1.7 m Machine weight about 0.16 t The system is delivered in black! Approx. Onsite Dimension. (l x w x h): 1,330 x 880 x 825 mm, weight approx.: 160 kg

Description: This blasting cabin is supplied as standard. 4 self-adhesive windows for the window. Jet nozzle, pressure regulator, pressure indicator, foot pedal. LED lighting with transformer, microfilter, set of gloves. Lockable top cover. Internal dimensions 410 x 310 x 380 mm Operating pressure 4 - 8 bar Air consumption at 6 bar min. 250 l / min Machine weight approx.12.5 kg Package size max. 490 x 370 x 380 mm Approx. Onsite Dimension. (l x w x h): 490 x 370 x 380 mm, weight approx.: 12,5 kg

Description: Demonstration machine. This oil-free and compact Hyundai compressor is light in weight and a super quiet operation. Very quiet, approx. 53-60dB (Suitable for the indoor area) Equipped with: - safety valve. - Pressure regulator with manometer and coupling. - Drain valve on the tank. - moisture separator. Delivery pressure 8 bar eff. Delivery rate 235/165 L / min Boiler volume 50/10 l / bar Machine weight approx. 22.5 kg. Number of cylinders 2 pcs. Motor 230V / 1.5KW V / KW Dimensions L-W-H 790 x 400 x 730 mm Approx. Onsite Dimension. (l x w x h): 790 x 400 x 730 mm, weight approx.: 37,5 kg

Description: This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB (Suitable for indoor use) Equipped with: - safety valve. - Pressure regulator with pressure gauge and coupling. - Drain valve on the tank. - moisture separator. Delivery pressure of 8 bar eff. FAD 125/85 L / min Boiler capacity 24/8 l / bar Number of cylinders 2 pcs. Motor 230V / 0,75KW V / KW Approx. Onsite Dimension. (l x w x h): 600 x 310 x 510 mm, weight approx.: 22,5 kg

Description: The Hyundai HHY3000F is a powerful and reliable 3 KW generator. A durable and energy efficient 212CC 4-stroke engine. (7 HP, type R210) reliable backup power for home, office or small workshop. 2 x 230 volt. (16A) AC output and 1 x 12 volt. (8,3A) DC output. With automatic voltage regulator. Rated power 3,0 KW Rated current 16 / 8.3 amperes Output voltage 2 x 230AC / 1 x 12V Tank volume 12 l Engine power 7.0 hp Approx. Onsite Dimension. (l x w x h): 600 x 470 x 460 mm, weight approx.: 45 kg

Description: Mini CPN dispenser with meter and self-priming pump Self-reflexive weapon 2 meter suction hose 4 m long reinforced hose that connects the regulator to the gun. check valve Connect 2 pieces. Gaskets and brackets Approx. Onsite Dimension. (l x w x h): 300 x 300 x 400 mm, weight approx.: 15 kg

Description: Mini CPN dispenser with meter and self-priming pump Self-reflexive weapon 2 meter suction hose 4 m long reinforced hose that connects the regulator to the gun. check valve Connect 2 pieces. Gaskets and brackets Approx. Onsite Dimension. (l x w x h): 300 x 300 x 400 mm, weight approx.: 15 kg

Description: Mini CPN dispenser with meter and self-priming pump Self-reflexive weapon 2 meter suction hose 4 m long reinforced hose that connects the regulator to the gun. check valve Connect 2 pieces. Gaskets and brackets Approx. Onsite Dimension. (l x w x h): 300 x 300 x 400 mm, weight approx.: 15 kg

Manufacturer : Merk Process (Bucher) Model: Drycab VDC (Vacuum dryer cabinet) Type: vacuum tray dryer Year : 2008 Application :? dry and process different heat-sensitive products for the food and pharmaceutical industry. Documentation available A - Vacuum dryer cabinet Cabinet volume: 656 L Pressure: - 1 / 0 Barg Permissible temperature: 200?C Heating jacket: 2 X 20 L Pressure: 5 barg Permissible temperature: 250?C Materials: 304 stainless steel Equipment: temperature sensor, pressure sensor, regulated valve, etc. B - Condenser Type: tubular exchanger Volume 1: 10.7 L Pressure: -1 / 3 Barg Permissible temperature: 100?C Volume 2: 21.7 L Pressure: 0 / 8 barg Temperature range: 25?C Materials: 304 stainless steel C - Vacuum pump Manufacturer: Elmo Rietschle Type: rotary vane vacuum pump D - Temperature regulator Ma ...

Manufacturer : Frewitt Model: MGIF-624 Type: Oscillating granulator Materials : Stainless steel Dimensions : 100 x 80 x 170 cm Motor power : 1,5 KW Motorization : Stober Variable speed, regulator : mechanical Mounted on a stainless steel frame with 4 wheels Capacity : about 1000 kg/h depending on product Technical file available.

Manufacturer: Solev (Clauger) Model: RH 550/230-25U-0-RS-SP-2G/1F Year : 2007 Type : glycol water heat controller / Thermal skid Class : ATEX - EX II 3 G - EEx b,c,d,e II B T2 Minimum / maximum temperature : +20?C / +230?C Intensity: 51 A. Heating: 25 kW immersion heater Heating control by thyristors. Cooling: No cooling system. Heat transfer fluid: Therminol 66 Regulator type 2704 single loop from EUROTHERM Centrifugal electric pump unit giving a flow rate of 26 m3/H Motor: 4 KW. ALWEILLER NBT32-160/01/149 pump Filling volume : 69 L - 246 L Documentation available Sold with protective cover.

Description: Power: 100kva Rated standby power: 110 kva Voltage: 233/400v Rated Current: 144,3a Max. sound level: ≤80 Engine: Model: 6RT80-132D Air Intake system: Turbocharged Nº cylinders: 6 in line Raded speed: 1500 r/min Rated Power:132 kw Intellite governor type: Mechanical Start Motor: 24v Exhaust system: Exhaust gas flow 27 m3/min Gas temp: ≤600 Max. back pressure:10kpa Air Intake System: Max. Intake restriction: 6,5kPa Fuel System: Load prime power: 19 l/h Fuel tank capacity: 500 l Lubrication System: Total system oil capacity 17 l Oil consumption: ≤1,63 g/kw.h Min oil pressure: 0,3x0,5 MPa Cooling System: total coolant capacity: 24l Thermostat 85-92ºC Max. top tank temperature: 105ºC Alternator - Lucla Model LU274D Phase: 3 Voltage 230/400v Frequency: 50 Hz Prime power:100kva Controller - ComAp Model Intelilite AMF 25  ...

Used Syrup Room A DUE SYRUP ROOM 1999 The syrup room is in excellent condition almost new barely used Components One Sugar dissolving tank with pasteurizer and filtration One Sugar loading screw conveyor Two 10 000 L tanks Two 20 000 L tanks One Tray One walkway connecting silos One Pasteurizer 2500 l h ONE DISSOLUTION TANK 10 000 L capacity the tank is composed of the following components 1 Conical manhole top cover 2 Pasteurization and filtration system for sugar solution 3 Central cylindrical plating 4 Cone shaped bottom 5 Square support feet 6 Vertical agitator group 7 Supply pumps ONE LOADING SCREW ELEVATOR 12 000 kg h flow loading screw to be used to load crystalline sugar It is composed of Hopper Easel Loading screw Motor gearmotor group Protective grid ONE PASTEURIZER 2500L h Pasteurizer made of AISI 316 and 304 steel components 1 Plate heat exchangers 2 Thermoregulator tool 3 Fl ...

x-travel:650 mm y-travel:540 mm z-travel:620 mm weight of the machine ca.:4,2 t dimensions of the machine ca.:2,20 x 2,50 x 2,60 m Table dimensions:800 x 540 mm workpiece weight max.:700 kg spindle speed max.:50-10000 U/min Number of tools:24 St. tool changing time:6 sec 3 Axis # New teleco covers in 2018 # New ball screws X and Y axis in 2019 # Overhaul of a regulator unit in 2019 Transport dimensions 2400x3050x2600 Video available

Overview This complete brewing equipment is mainly from 2014 and is becoming available because the company is closed. The equipment is already dismantled and stored properly. Scope  Water Softener Compressor | Josval Sauber 240 D Mill | Robix ROPPI 250 Thermindus Boiler Ps(Barg 6) PL (Barg 10.4) Ts Max 165, Ts min 10, kW 34 Portable Pump 2.20kw INOX Hoses, cones, keys Manual Isobaric Bottling Machine 4 spouts Automatic Labeler | Arca L10-8128 2x Rotating Table with Regulator 100cm Diameter, for input and output of bottles or cans Videojet 1220 Batch Coder Infrico Undercounter Refrigerator with 3 Doors Brewhouse | Spadoni | MBS 600 VAP | 2014 Spadoni 600, Masher 680 Liters, Bottom Filter, Rotating Blades, Transfer and Recirculation Pump Boiler 720lt with Whirlpool, with Boiler Pump and Spadoni Plate Cooler Hot Water Tank | Spadoni | 10hl Cold Water Tank | Spadoni | 10hl Mixing Tanks | Sp ...

Vertical panel-sizing saw Brand: Putsch Type: SVP 145 M New machine Description: The SVP 145 M is a vertical panel saw for cutting panels in vertical and horizontal direction. The frame of the saw is completely welded and has a support grid for the workpieces to be processed, consisting of aluminium strips and plastic inserts. The automatic grid displacement ensures that the saw blade does not hit the support bars during horizontal cuts. The lower workpiece supports consist of aluminium soles and plastic inserts. For the easy movement of the workpieces, the machine is equipped with retractable transport rollers. The saw beam and the saw carriage can be moved and adjusted by hand, the saw beam can be fixed in 5 vertical sawing positions for this purpose. The comfortable insertion and removal of the saw head is ensured by an ergonomically shaped handle. Standard equipment: - El ...

Brushing machine for structuring of wood surfaces Brand: Ecoline Type: Rustikmat 2-600 Immediately available showroom machine - Upper feeding belt with grip, power 0,75 kW frequency controlled.  - Controlled lift of feed belt via ball bearing guidances for precision and a long product life.  - With electronic adjusments and frequency controlled brushes  - Transmission of the motors via v-belt. That is the cause of the low weight, minimal maintenance work and in relation a high trasmission.  - Additional rollers at infeed and outfeed for more supporting space.  - Additional pneumatical and self-regulating pressure of brushes via lower pressure pistons to process as well slight convex / concave formed surfaces to get an even finish.  - Additional verticale and independant adjustment of the bruhes up to 20 mm via regulator to have a similar wear a ...

Vertical panel saw Brand: Putsch Type: SVP 950 M New machine Description: The SVP 950 M is a vertical saw for cutting panels in vertical and horizontal direction. The frame of the saw is completely welded and it has a working table for the workpieces which consists of aluminium fences with plastic inserts. To prevent a contact with the saw blade while doing horizontal cuts, the frame is equipped with an automatic moving support. The lower workpiece supports consist of aluminium and have lowerable transport rolls. The saw beam and the saw unit can be adjusted and moved manually. Therefore the saw beam can be fixed at 6 vertical sawing positions. The simple shift of the saw head is possible because of an ergocnomical formed handle. Standard equipment: - Electric driven, automatic moving support - Swivable central support for small workpieces (length approx. 4680 mm) - 4 gr ...

Brushing machine Brand: Ecoline Type: Rustikmat 2-600 New machine - Upper feeding belt with grip, power 0,75 kW frequency controlled. - Controlled lift of feed belt via ball bearing guidances for precision and a long product life. - Manual height adjustment - Additional pneumatical and self-regulating pressure of brushes via lower pressure pistons to process as well slight convex / concave formed surfaces to get an even finish. - Additional verticale and independant adjustment of the bruhes up to 20 mm via regulator to have a similar wear and tear and to change the depth of the structuration (stronger / slighter). - Transmission of the motors via v-belt. That is the cause of the low weight, minimal maintenance work and in relation a high trasmission. Suctiong housing for each brush. - Additional rollers at infeed and outfeed for more supporting space. 2 Brushes More ...

With PRO 400 concrete products machines we provide excellent medium-level entry solution, and also long term solution for many customers. These machines combine durable, heavy-duty construction with the possibility for assembly various concrete product lines - from simple to fully automatized. Production of high-quality concrete products is offered with RHP series of machines: concrete paving stones, hollow blocks, solid blocks, insulated blocks, curbstones, gardening blocks, etc... PRO machines are working with hi-efficiency vibration system named SYNCHROTRONIC VIBRATION. Vibrators driven with frequency regulators enables the operator to adjust the frequency during machine cycle providing hi-speed mould feeling and final product compaction. The rigid mechanical structure of the vibrating table and vibrators ensure hi durability and low maintenance. PRO 400: • Production board s ...

Laser printer for plastics FARSOON eForm 3D built in 2017. The printer is offered with complete equipment for preparing powder and cleaning prints. The equipment was used to a small extent for about 12 months, it worked for about 2000 hours. The device operated in a gas shield from a cylinder. Complete with printer: 8 nitrogen regulators. Technical data of the FARSOON eForm 3D printer: - open control software: any modification of printing parameters - laser type: CO? - laser power: 30 W - dimensions of the printing chamber (W × D × H ) : 250 × 250 × 320 mm - single print layer: 0.06 ~ 0.3 mm, adjustable - maximum creation / build speed: 0.8 l / h (depending on the material) - precise scanning system: Galvo - scanning speed: 7.6 m / s - power requirements: 380 VAC, 50/60 Hz, 16 KVA, three-phase five-wire - maximum temperature in the chamber: 190 degrees C - heating el ...

The FORNI INDUSTRIALI FIBEX COMBI 6GX-10.130-7110.2E.270 brazing furnace was built by the Italian company Forni Industriali Heat Treating Plants in 2007. The furnace is used for soldering steel elements with solder paste at temperatures up to 1120 degrees Celsius. At the entrance and exit of the furnace, two pairs of gas burners (so-called safety pilots) are installed to prevent the escape of the protective atmosphere outside the furnace. Electric heaters powered by thyristor temperature regulators are responsible for the proper temperature in the furnace. The belt furnace has a conveyor speed adjustment in the range from 0 to 500 mm / min, and the working length of the soldering zone is 7100 mm. The furnace for brazing steel elements was modernized in 2021 - the thermal insulation and the cooling module for sections 1 and 2 were replaced. The cost of the modernization was 70,000 Euro.  ...

The Prima Power Platino 1530HS laser was produced in 2006 by the Italian company Prima Industrie S.p.A. The 4 kW laser is equipped with a Primach 20L CNC control. The machine is used for cutting metal sheets with a thickness of 20 mm (black steel), 12 mm (stainless steel) and 8 mm (aluminum). The laser has an independent F axis with programmable focus position and nozzle distance. The maximum feeds in the X / Y / Z / F axes are respectively: 3050 mm, 1525 mm, 150 mm and 25 mm. The machine is equipped with: a Prima Power Convergent Lasers Division CX 3000 resonator with a power range from 200 to 3000 W and a cooling unit. In addition, the price of the laser also includes 3 cylinder regulators made of chrome-plated brass with a stainless steel diaphragm in the first stage of reduction and a bellows structure in the second stage of reduction, and 2 cylinder regulators for oxygen and nitroge ...

Diesel generator set 9 kVA - NEW E-Start - AVR - Emission Standard Stage V - - - - - Manufacturer: - CGM, Italy - - - - - Engine: - CGM, 4-stroke, diesel, air-cooled - Displacement: 498 cc - Power: 12 hp - - - - - Generator: - 9 kVA at 400 volts - 7 kVA at 230 volts - Voltage: 230 / 400 Volt - Frequency: 50 Hertz - - - - - Starting unit / control unit: - Ignition lock for starting and stopping - Digital display with monitoring displays, such as .B volts, amps, hertz, kW, operating hours - - - - - Sockets: - 1x 400V 16A - 1x 230V 32A - 1x 230V Schuko - Incl. RCD - - - - - Equipment: - AVR voltage regulators (so even sensitive devices can be operated) - Electric start - Oil deficiency protection (generator set does not start when the oil level is too low) - Overload protection - Automatic start interface (ATS connection) for easy inse ...

Diesel generator set 13 kVA - NEW E-Start - AVR - Emission Standard Stage V - - - - - Manufacturer: - CGM, Italy - - - - - Engine: - CGM, 2-cylinder, diesel - Water-cooled - Displacement: 794 cc - Power: 11.5 kW / 16 hp - - - - - Generator: - 12 / 13.2 KVA at 400 volts - 9 / 9.9 kVA at 230 volts - Voltage: 230 / 400 Volt - Frequency: 50 Hertz - - - - - Starting unit / control unit: - Digital start unit (ComAp InteliLite 9) - Manual start at the push of a button - Automatic start function - Digital display with monitoring displays, such as .B volts, amps, hertz, kW, operating hours - - - - - Sockets: - 1x 400V 16A - 1x 230V 32A - Incl. RCD - - - - - Equipment: - Soundproofed housing - AVR voltage regulators (so even sensitive devices can be operated) - Electric start - Oil deficiency protection (generator set does not start when t ...

rated capacity: 2,0 KW rated current: 10/6,0 Ampere output voltage: 2 x 230AC / 1 x 12DC V weight of the machine ca.: 29 Kg dimensions of the machine ca.: 490 x 280 x 405 mm The Hyundai HHY3000F is a powerful and reliable 3 KW generator. A durable and energy efficient 212CC 4-stroke engine. (7 HP, type R210) reliable backup power for home, office or small workshops. 2 x 230 volt. (16A) AC output and 1 x 12 volt. (8,3A) DC output. With automatic voltage regulators. (exhibition machine) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rated capacity: 3,0 KW rated current: 16/8,3 Ampere output voltage: 2 x 230AC / 1 x 12DC V tank capacity: 12 l engine output: 7,0 PS weight of the machine ca.: 45 Kg dimensions of the machine ca.: 0,68 x 0,58 x 0,54 m Exhibition machine The Hyundai HHY3000F is a powerful and reliable 3 KW generator. A durable and energy efficient 212CC 4-stroke engine. (7 HP, type R210) reliable backup power for home, office or small workshops. 2 x 230 volt. (16A) AC output and 1 x 12 volt. (8,3A) DC output. With automatic voltage regulators. (exhibition machine) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Krauss Maffei KMD120 extruder - efficient - year of manufacture 2002 - Screw diameter: 120 mm parallel - L/D: 23 - capacity: 600 - 700 kg/h - the scope of general renovation in 2011 carried out in our company - new AC 90 kW motor, controlled by a new vector inverter - new control cabinet equipped with new heaters, new housings, new fans, - new thermoregulation cabinet equipped with SSR + new regulators - new plasticizing system, - number of heating zones: cylinder (5), connector (1), head (3) - reducer after reconditioning - drive synchronization system: extruder, dispenser - equipped with a pressure and temperature sensor. -Dimensions; length x width x height = 530160170cm + hopper - Extrusion axis 1200mm

Pressure reducers, pressure regulators -Type: D14100 -Connection -Input: max. 20 bar -Output: max. 10 mbar -Weight: 2.7 kg

Pressure reducers, pressure regulators -Type: 002 3539 -Connection: -Price: per piece -Number: 9x available -Weight: 0.5 kg/piece

Pressure reducers, pressure regulators -Type: 444.223 -Connection: 1/4 -Price: per piece -Number: 8x available -Weight: 0.4 kg/piece

Laboratory refrigerator Liebherr LCexv 4010, combination device, explosion-proof interior in accordance with the ATEX directive for the storage of explosive and highly flammable substances. Electronic temperature control with 0.1°C temperature display to the degree enables the most accurate temperature settings Built-in data storage with AlarmLog Two independent regulators and two compressors for optimum functionality and rapid cooling rate after door openings 1-point calibration SmartMonitoring Ready via RS485 interface potential-free alarm contact for connection to central building control centers Access for temperature sensor (Ø 10 mm) Practical drawers (in the freezer compartment) with transparent front for a clear view of the stored goods The doors are self-closing for convenient operation, the door hinge can be changed and the clamp seals are replaceable

ECKERT AGAT SPEED gas cutting machine was manufactured in Poland in 2014. The machine designed for precision cutting of metal sheets with a maximum thickness of 100 mm is distinguished by a high-quality portal with an open structure, ensuring excellent stability during the performed cutting process and free access of the operator to the working space. The contamination generated during the cutting process is continuously removed by a sectional extraction table covering the entire working area of the machine. The ECKERT gas cutting machine is also equipped with, among others, a state-of-the-art CNC ECS 872 controller and an oxygen torch support with capacitive distance sensor. Technical data of the ECKERT AGAT SPEED CNC cutting machine - CNC control: ECS 872 - maximum workpiece thickness: 100 mm - work table surface (L x W): 3000 x 2000 mm - oxygen torch support with capacitive dis ...

Pressure reducers, pressure regulators, manometers -for: forming gas -Output: flow meter -Dimensions: 240/200/H70 mm -Weight: 1.1 kg

rated capacity: 2,6 / 3,0 KW rated current: 16/8,3 Ampere output voltage: 2 x 230AC / 1 x 12DC V tank capacity: 18 l engine output: 6,5 PS weight of the machine ca.: 45 Kg dimensions of the machine ca.: 0,68 x 0,58 x 0,54 m Exhibition machine The Hyundai HHY3000F is a powerful and reliable 3 KW generator. A durable and energy efficient 212CC 4-stroke engine. (7 HP, type R210) reliable backup power for home, office or small workshops. 2 x 230 volt. (16A) AC output and 1 x 12 volt. (8,3A) DC output. With automatic voltage regulators. (exhibition machine) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

There are two identical machines available, operating temperature: 250°C, connected load: 3kW, the heating regulators are defective.

Hydraulic power pack, hydraulic unit BOSCH REXROTH Order No: 983885 Year of construction 1982 Tank capacity: 150 litres Operating pressure: 60 bar nominal pressure / max. 100 bar Volume flow: 20 litres /min. Motor power pump: 3 kW Mains connection: 380 volts, 50 Hz. - 1 piece hydraulic pump BOSCH REXROTH, type 1PV2V3-40/25 RAO1MC63 - 2 pieces hydraulic valve BOSCH REXROTH with electro solenoid coil, type E6 E51/AG24NZ4- 2 pieces hydraulic valve BOSCH REXROTH with electro solenoid, type 4WE10D10OFLG24NZ4 - 1 piece pressure accumulator - various throttle valves, pressure regulators and pressure gauges - return line filter with indicator - hydraulic tank with maintenance cover Space requirement L x W x H: 950 x 750 x 1100 mm Weight: 400 kg good condition; used

ECKERT SZAFIR BL2 3D plasma-gas cutting machine was manufactured in Poland in 2016. The plasma cutting machine uses a plasma beam generated by a highly efficient KJELLBERG Smart Focus 200 aggregate with a power of 200 A to precisely cut workpieces made of mild steel, stainless steel and aluminium. Stability during machining is ensured by the machine’s high-quality steel portal, which was additionally extended by 700 mm to allow easy loading and unloading of larger metal sheets. The plasma-gas cutting machine guarantees a high level of safety and operator comfort, thanks to a sectional extraction table with a length of 6000 mm and a width of 2000 mm, which is used to eliminate the dust produced during cutting. The plasma-gas cutting machine is also equipped with among others a CNC ECS 872 controller with a 15″ touchscreen, a WALTER SKTG 11 P COMBO screw compressor and a WALTER WDF  ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: MTU Engine: 12 V 1600 G 10 F Engine No.: in production Power: 524 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Heating oil or diesel B7 Technical data generator: Generator manufacturer: A. van Kaick Generator type: synchronous with AVR Gene. No.: in production Generator power: 680 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power parallel operation Switch: Generator switch 4 poles Delivery: Built-in Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1 ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: MTU Engine: 12 V 1600 G 20 F Engine No.: in production Power: 576 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: synchronous with AVR Gene. No.: in production Generator power: 680 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1.850 Hei ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: MTU Engine: 12 V 1600 G 20 F Engine No.: on request Power: 576 KW G3 Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 / Diesel B 7 Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 F Gene. No.: in production Generator power: 680 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 2.060 Height approx. mm ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Baudoin Engine: 12 M 33 G 1400 / 5 Engine No.: in production Power: 1,100 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: PI 734 B Gene. No.: in production Generator power: 2,000 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 1000 Dimensions of the power unit: Width approx. mm: 2.460 Height appro ...

Pressure reducers, pressure regulators, manometers -for nitrogen -Inlet pressure: max. 200 bar -Outlet pressure: 0 - 50 bar adjustable -Number: 1x reducer available -Price: per piece -Weight: 1.6 kg/piece

Pressure reducers, pressure regulators, manometers -for forming gas -Inlet pressure: max. 200 bar -Output: flow meter -Number: 2x reducers available -Price: per piece -Weight: 1.8 kg/piece

Pressure reducers, pressure regulators, manometers -for nitrogen -Inlet pressure: max. 25 bar -Outlet pressure: 0-1.5 bar adjustable -Number: 1x reducer available -Price: per piece -Weight: 1.3 kg/piece

Fieldbus, Profibus, PLC control, automation technology, controls and regulators, end module, fieldbus controller, PLC terminal, digital input terminal -Manufacturer: Wago, digital input terminal from Demag D 100-275 NC injection molding machine -Type: 750-400 -Dimensions: 70/15/H100 mm -Weight: 0.1 kg

Fieldbus, Profibus, PLC control, automation technology, controls and regulators, end module, fieldbus controller, PLC terminal -Manufacturer: Wago, end module from Demag D 100-275 NC injection molding machine -Type: 750-600 -Dimensions: 70/15/H100 mm -Weight: 0.1 kg/pc.

Fieldbus, Profibus, SPS control, automation technology, controls and regulators, bus coupler, logic bus terminal, input terminal, Interbus S -Manufacturer: Lenze, Interbus S Module Bus Drive -Type: 33.2111IB -Number: 11x module available -Price per piece -Dimensions: 75/45/H60 mm -Weight: 0.1 kg/pc.