regulator used for sale

through-put width: 580 mm working heigth: 580 mm air consumption: 400 - 800 l/min working pressure: 3,4 - 8,0 bar suction capacity: 17,4 m³/h total power requirement: 1,2 kW weight of the machine ca.: 115 kg dimensions of the machine ca.: 1225 x 935 x 1640 mm - Suitable for various blasting materials, e.g. quartz, glass ball, Plastic ball, etc. - Ideal for cleaning, derusting or removing paint from all metal parts Type, e.g. engine parts, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety when machining workpieces because of the Window with glued protective film - Dust-free work due to all-round seals on the cover and door frames - Stable storage grid enables workpieces to be placed in the cabin interior - With drain opening for changing the blasting material - Suction pipe for the b ...

through-put width: 870 mm working heigth: 850 mm air consumption: 400 - 800 l/min working pressure: 3,4 - 8,0 bar suction capacity: 17,4 m³/h total power requirement: 1,2 kW weight of the machine ca.: 160 kg dimensions of the machine ca.: 1320 x 1200 x 1760 mm - Suitable for various blasting materials, e.g. quartz, glass ball, Plastic ball, etc. - Ideal for cleaning, derusting or removing paint from all metal parts Type, e.g. engine parts, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety when machining workpieces because of the Window with glued protective film - Dust-free work due to all-round seals on the cover and door frames - Stable storage grid enables workpieces to be placed in the cabin interior - With drain opening for changing the blasting material - Suction pipe for the  ...

The gas flare was intended for a research project that could not be carried out. It is brand new and in its original packaging. The torch is supplied as a complete "package unit" with an on-site control cabinet made of CrNi steel. The torch can be installed both indoors and outdoors, but the torch should be visible to the operator of the control cabinet. 1.1 Pilot burner / biogas support burner with fittings The equipment of the pilot biogas burner unit consists of the following components: - Shut-off ball valve DN25, approved for biogas - Biogas filter DN25 - Pressure regulator DN25 - Pressure gauge with "push-button shutdown", 0-100 mbar, approved for biogas - Gas solenoid valve DN 25, make: Kromschröder, type VAS 125R/LW - Flame arrester DN25, make: Protego, FA-G1" IIA1-P2,2 - Biogas burner nozzle (4 pcs.) 1.2 Process gas burners with fittings The equipment of the p ...

Bergen Rolls Royce B35:40V20AG complete gas power plant Year of Make 2011 running hours: 16.380 Hours 8415 Kw 11kV 50 Hz at 750 RPM with AVK DIG 167 f/8 alternator 9100 kvA Complete power plant with all auxilaries: Control Air Compressor ,Self Demand Transformer, LT cooling water system, cooling tower, HT cooling water system, cooling tower, cooling fans, Start Air Compressors and Air tank, Natural Gas Regulator Unit, Emergency Diesel Generator 220 kVA, piping systems oil filter and heater exchangers, Neutral Earthing Resistor Unit, Generator Cooling Fans, Steam Boiler: Nooter/Eriksen Capacity: 5.5 T/h, Switchgear Units, engine tools, instruction manual and more... Please contact for more info and complete scope / offer

Available in stock 2 x Used RMG Solenoid Gas Valves DN65 PN16, model 01-EVA 25 NH-4. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 1 x Gas Filter DN65 PN16 1 x Gas Pressure Regulator DN65 PN16 The equipment is used but in good working conditions. VDC: 24 Power: 70 W Maximum Inlet Pressure: 0.1 bar Environment Temperature: -20ºC to +60ºC

Friction feeder brand ANKUCH model ASB. This feeder is synchronized with the speed of the machine conveyor Energy: 430v/tri plus pneumatic supply at 6 bars Machine speed: max. 240 products/min Use format: product length  maxi 200 mins / min 35 mins product width maxi 110 mins Parts recently changed: welding jaw resistors, electric rotating joint, temperature regulator, power contactor for the heating resistors. Stock of new parts: Electric rotating joint Stock of spare parts: numerous used parts plus a complete feeder little used Number of shapers (format change) =>10 shapers Machine year: 1997 Last intervention by the manufacturer on the machine: Oct 2012 Machine equipped with option: an automatic friction feeder. (Automatic distribution of cards) Documentation: user manuals and spare parts for the friction feeder and for the aucotronic plus mechanical and electrical  ...

Available in stock 1 x Used Madas Gas Filter DN100 PN16. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Pressure Regulator DN65 PN16 The equipment is used but in good working conditions. Environment Temperature: -15ºC to +70ºC Maximum Working Pressure: 2 bar

Warehouse No.: 503240 manufacturer: ENGEL type: Victory 650-120 Tech EC200 A02 Year of Construction: 2008 Operation hours: 60000 h clamping force: 1200 kN Size of mould plates H x V: 740 x 680 mm Min. mould height: 300 mm Open Daylight: 800 mm Opening stroke: 500 mm Screw diameter: 45 mm SWEPT Volume: 318 cc Injection pressure: 1232 bar Equipment included: screen text english CEE-socket 16A Core Pulling Hydraulically 2x Air Valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface EUROMAP 67 Mould Heating 8x measures of machine LXWXH: 4.86m x 1.5m x 2.1m total weight: 7600KG

Available in stock 1 x Used Bohmer Kugerlhahne Gas Ball Valve type FSK V 016.065 with Filter and Dungs Differential Pressure Switch GW 50 A4. We also have other elements of the gas train available, namely: 1 x Gas Pressure Regulator DN65 PN16 2 x Solenoid Gas Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Pressure Switch Maximum Operating Pressure: 500 mBar DN 65 PN 16

 Model SASL 200x500.  Weight approx: 14 Tm.  Working wheel dimensions: 500x500x305 mm.  Regulator wheel dimensions: 315x500x203 mm.  Extra working wheel  Tooling to change wheel  Retrofited in 1999  Operational and working conditions.  We rectify through outer rings of bearings with diameters between 50 and 200 mm.  If you want, you can see her work on a visit.  Certified according to 1215/97  Attached photos of plate and machine.

second hand welding toner Brand: PEMAMEK OY Model: 60TS Power: Three-phase 380V Crazy turner + motorized turner Diameter range (Minimum - Maximum): 900 - 5200mm Translation for motorized tacking movement Type: Self-aligning Command with movement control and regulator for rotational speed variator Year 2000 Weight: 1990kg

Festo offers a pressure regulator valve battery with switch-on valve, pressure gauges, silencer, mounting brackets, angled 3/8" push-in fitting outputs and a through-ground, angled 3/8" push-in fitting input. The complete battery is in absolute top condition, it is an unused part of the stock. The following is pre-screwed ready for use: - 528988 Pressure Control Valve Battery LRB-3/8-D-7-0-K4-MIDI - 162809 Switch-on valve HE-3/8-D-MIDI - 4 x 359873 pressure gauge 0-10bar MA-50-10-1/4 - 159593 HFOE-D-MIDI/MAXI mounting bracket - 165004 Silencer UC-1/4 - 4 angled 3/8" push-in fittings on the outputs - Through-ground, angled 3/8" input

Cool Compact Magnos 650 Refrigerator with Glass Door  Versatile convection refrigerator  excellent for commercial kitchens, restaurants, butchers, bakeries Cool Compact Refrigerator Magnos 650 with Glass Door suitable for use with GN 2/1 containers (grid size 530 x 650) with convection cooling and electronic control inside/outside CNS 18/10 ( also back wall, bottom and cover plate ) Warning by visual and acoustic signal Compressor Protection Function suitable for the tropics - suitable for ambient temperatures up to 43ºC Automatic evaporation of condensation by hot gas Cooling body made of one piece high-pressure foamed self-closing and lockable door, door hinge on the right Evaporator-free interior Drawers with telescopic full-extension extensions made of stainless steel 1.4509 Very stable drawer guide: loadable up to 60 kg Electronic control with 4 top performanc ...

Ref.Nr. 0808 Name of the system Exhaust air scrubber C180 Manufacturer: Kyocera Model C180 Year of construction 2022 ACCORDING to order confirmation from the manufacturer Description Exhaust air scrubbers for installation next to the exhaust or free installation for washing (absorption) of aggressive and toxic gases from the exhaust air directly at the point of origin. For cleaning, the exhaust air is passed through a spray mist, which is generated by a specially designed conveyor and spray wheel. The purified exhaust air is passed through agglomerators and mist eliminators to prevent moisture from entering the exhaust air system. Execution 1 housing made entirely of polyprophlen (PP), (see below for the overall dimensions of the device) 1 block flange DN 250 with 4 connections on the right, left and top sides 2 sealing covers to close the connections that are not ne ...

Key data: 3500 , 60

warehouse no.: 503071 manufacturer: DEMAG type: Concept 350-710-1450 controller: NC4 year of construction: 2003 operation hours: 62370 h clamping force: 3500 kN distance between tie-bars h x v: 710 x 630 mm size of mould plates h x v: 1040 x 950 mm min. mould height: 330 mm max. mould height: 830 mm max. open daylight: 1385 mm opening stroke: 675 mm screw diameter: 60 mm swept volume: 763 ccm injection pressure: 1905 bar equipment included: 16x control for hotrunner screen text german CEE-socket 16A core pulling hydraulically 1x air valve moveable WAP machine incl. water flow regulator machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 interface EUROMAP 63 Schuko-socket 10A measures of machine l x w x h: 6.5m x 2m x 2.3m total weight: 15300KG

Semi-Automatic Roll Rewinder with Automatic Positioning and Manual Cutting Year of construction: 2023 Condition: Like new, barely in use Manufacturer: LIDEM Construcciones Mecánicas S.L., Spain Inclusive: Blade Lubrication System, Motorized Sharpener, Film Packaging System Description: Semi-automatic slitter rewinder with a cutting width of 2,000 mm, a maximum diameter of up to 400 mm and a minimum diameter of 100 mm. The positioning of the cutting head is automatic, while the lowering of the cutting head is done manually. The fastening system of the cutting head allows for high-precision cutting. System for varying the blade speed to cut all materials. Details: - Two guide benches. Displacement guides for the movement of the head. Cutting head displacement by timing belt. - A servo motor for the movement of the cutting head timing belt allows perfect positioning of  ...

Band saw; wheel diameter 1400, wheel width 135mm, maximum saw opening 750mm, frequency regulator for cutting speed/feed speed, discharge belt rear saw 500x3300mm motor power 1.5kw, motor power 37kw, connection 200mm: clamping truck; length 6750mm, equipped with 3 electrically operated arms, with computer cutting thickness, transport size 6750x1700x2250mm; Rails and accessories total length 15 mtr in 3 segments, motor power drive 5.5 kW. Please note! Lot has already been dismantled

Key data: 1600 , 55

warehouse no.: 503156 manufacturer: KRAUSS MAFFEI type: KM 160-1000 PX controller: MC6 year of construction: 2018 operation hours: 9585 h clamping force: 1600 kN distance between tie bars h:: 520 mm distance between tie bars v:: 470 mm size of mould plates h: 710 mm size of mould plates v: 660 mm min. mould height: 200 mm max. mould height: 500 mm opening stroke: 950 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar equipment included screen text german pressure accumulator for uprated injection speed 3 freely programmable each inputs and outputs air valve 2x machine incl. water flow regulator Anti vibration mounts interface EUROMAP 67 interface for temperature control units interface USB wear-resistant injection unit mould heating 24x measures of machine lxbxh: 6.7m x 1.6m x 2.3m total weight: 10900KG ...

warehouse no.: 503252 manufacturer: KRAUSS MAFFEI type: KM 50-180 CX controller: MC5 year of construction: 2006 Machine is from a cleanroom production. clamping force: 500 kN distance between tie bars h x v: 370 x 370 mm size of mould plates h x v: 600 x 600 mm min. mould height: 200 mm max. open daylight: 400 mm opening stroke: 600 mm screw diameter: 30 mm swept volume: 85 ccm injection pressure: 2025 bar equipment included: screen text german core pulling hydraulically 1x cascade control pneumatically 1 x air valve 2x machine without material hopper machine without water flow regulator Anti vibration mounts interface EUROMAP 67 interface for temperature control units measures of machine lxbxh: 3.5m x 1.4m x 2m total weight: 3000KG

warehouse no.: 503174 manufacturer: DEMAG type: ERGOtech 1000-420-310 controller: NC 4 year of construction: 2002 clamping force: 1000 kN distance between tie-bars h x v: 420 x 420 mm size of mould plates h x v: 600 x 600 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 35 mm swept volume: 168 ccm injection pressure: 2020 bar equipment included screen text german CEE-socket 16A complact flash drive core pulling hydraulically 1x air valve 1x machine incl. Handling machine incl. water flow regulator machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 Schuko-socket 10A Schuko-socket 10A measures of machine l x w x h: 4.2m x 1.4m x 1.8m total weight: 3700KG technical data robot-system handling type: Linear manufacture: Wittmann controller: W7 ...

DC main spindle drive, power converter device with digital control Simoreg V55 spindle module, drive controller, rectifier, DC regulator Manufacturer SIEMENS type SIMODRIVE 6RA2725-6DV55-0 D380/60 Mreq-GdG6V55-3A0 Version V55 Basic unit Input voltage 3 AC 380 V Input frequency 50 / 60 Hz Input current 49 A Output voltage 380 VDC Output current 60 A Nominal power 22 kW Dimensions (W x H x D) 270 x 260 x 290 mm Weight approx. 25 kg The drive controller is still ready for operation in a Gildemeister GDM42. You can find the right drive motor under stock number 60347 Further components from Gildemeister can be found under stock number: 60346, 60347 , 60348; used

Pneumatic press, air press BOSCH Type 0840 002 002 Fabr. No. 041 Year of construction 1980 Compressive force 18 KN = 1.8 ton. at 5 bar 15 kN = 1.5 ton. at 4 bar 12 kN = 1.2 ton. at 3 bar 8 kN = 0.8 ton. at 2 bar 6 kN = 0.6 ton. at 1.8 bar outreach 100 mm ram stroke 70 mm Table surface 245 x 200 Ram surface 45 mm Installation height max. 235 mm Clamping pin bore 20 mm with clamping screw Compressed air requirement 5 bar - Pressing force infinitely adjustable via pressure regulator- Pneumatic cylinder with plunger height adjustable by 90 mm- pneumatic 2-hand operation - mounted on metal base with wooden plates Space requirement L x W x H 1050 x 700 x 1600 mm Weight pneumatic press 82 kg Weight with table base 140 kg good condition; used

Code: 0812 Brand: OMEZ Model: ZAGFILO 900 Thread splicer for veneer Working port mm 900 Advancement speed from mt 5 to 25 min Automatic thread-cutter Automatic ejector for ended pieces Temperature regulator for the thread melting Wheels on base Overall dimensions mm 1300 x 600 x 1430 h Weight kg 300

Key data: 2000 , 55

warehouse no.: 503272 manufacturer: ENGEL type: VICTORY 1050-200 Power controller: EC100 A03 year of construction: 2004 clamping force: 2000 kN size of mould plates h x v: 860 x 830 mm min. mould height: 300 mm max. open daylight: 1050 mm opening stroke: 750 mm screw diameter: 55 mm swept volume: 511 ccm injection pressure: 1622 bar measures of machine lxbxh: 6.6m x 1.8m x 2.3m total weight: 12900KG equipment included screen text slovenian core pulling hydraulically 1x core pulling pneum. 1x air valve 1x machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface for ejector plates safety interface for dosing unit

Boiler capacity: 270l; Flow rate: 520l/min; Motor power: 4 kW; Refrigerant dryer: Yes; Stationary compressors with vertical 270 l tank Maximum performance in the tightest of spaces. Robust equipment and best quality Fully automatic on-switch operation With all safety devices Completely ready for connection  From 7.5 kW as standard with automatic star-delta switch  Fifteen-year warranty against rust penetration on inside and outside hot-dip galvanized compressed air tank quality electric motor Quality electric motor with high tightening torque is equipped with a motor protection switch start-up capacitor and start-up relief valve ensure easy start standard with phase changer for easy manual reversal of direction of rotation compressed air compression via high-performance unit HOS Start-up relief valve ensures easy, pressure-free start The two-cylinder high-performance engine made ...

Offer 22523 Specifications: - Pressure capacity at 10 bar 35 KN - Plunger stroke 12 mm - Projection 95 mm - Installation height approx. 134 mm - Table size approx. 230 x 190 mm - Air consumption per stroke 8.0 l - Air inlet 6 - 10 bar - Space requirement approx. W 520 x H 1450 x D 600 mm - Weight approx. 100 kg - with: - Foot switch - Pressure gauge + pressure regulator - 4 x punching tool

Offer 22526 Specifications: - Pressure capacity at 10 bar 35 KN - Plunger stroke 12 mm - Projection 95 mm - Installation height approx. 134 mm - Table size approx. 230 x 190 mm - Air consumption per stroke 8.0 l - Air inlet 6 - 10 bar - Space requirement approx. W 520 x H 1450 x D 600 mm - Weight approx. 100 kg - with: - Foot switch - Pressure gauge + pressure regulator - 4 x punching tool

Hood unit 20 kVA PRP Power: 20 kVA / 16 kW PRP Operating mode: 1500 rpm Voltage: 400/230 V Power factor: 0.8 Stage 3A Engine: Deutz | F3M2011 Generator: Leroy Somer | TAL040 F Aggregate control: Automatic control panel WITHOUT Switching and WITHOUT mains control with Comap IL-NT AMF8 1 x 4-pole circuit breaker Leak detector Battery disconnect switch Battery charger Cooling water heating Voltage regulator Tank: 100 L / 21.3 hours at 75% load

Hood unit 60 kVA PRP Power: 60 kVA / 48 kW PRP Operating mode: 1500 rpm Voltage: 400/230 V Power factor: 0.8 Stage 3A Engine: Deutz | BF4M2011C Generator: Leroy Somer | TAL042 H Aggregate control: Automatic control panel WITHOUT Switching and WITHOUT mains control with Comap IL-NT AMF8 1 x 4-pole circuit breaker Leak detector Battery disconnect switch Battery charger Cooling water heating Voltage regulator Tank: 135 L / 12.7 hours at 75% load

Hood unit 100 kVA PRP Power: 100 kVA / 80 kW PRP Operating mode: 1500 rpm Voltage: 400/230 V Power factor: 0.8 Stage 3A Engine: Deutz | BF4M1013EC Generator: Leroy Somer | TAL044 D Aggregate control: Automatic control panel WITHOUT Switching and WITHOUT mains control with Comap IL-NT AMF8 1 x 4-pole circuit breaker Leak detector Battery disconnect switch Battery charger Cooling water heating Voltage regulator Tank: 145 L / 9 hrs. at 75% load

Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Yanmar Engine: 3TNV76 Engine No.: 101652 Power: 8.2 KW Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S0 L 1 P 1 Gene. No.: X22G280021 Generator power: 15 kVA Voltage: 230 volts Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Remote start Switch: Generator switch 2 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 100 Dimensions of the power unit: Width approx. mm: 750 Height approx. mm: 1.270 Length approx. mm: 1.730 Weight ap ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Perkins Engine: 1103A-33G Engine No.: in production Power: 30.4 KW Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S1L2-K1 Gene. No.: in production Generator power: 30 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Manual & remote start Switch: Generator switch 3 poles Tank: Execution: Base frame tank with drip pan Content / liter: 120 Dimensions of the power unit: Width approx. mm: 950 Height approx. mm: 1.620 Length approx. mm: 2 ...

HONDA generator set 6 kW - NEW Soundproofed - ideal for home protection - - - - - Engine: -Honda - Model: GX390 - 1 cylinder -Petrol -Air-cooled - Displacement: 389 cc - - - - - Generator: - 6 kW / 6 kVA - 24.3 amps - Voltage: 230 volts - Frequency: 50 Hertz - AVR controller - - - - - Starting unit / control unit: - Ignition lock for starting and stopping - ATS interface, for easy plugging in of an ATS automatic start box - Hour meter - 1x 230V CEE 32A socket - 1x 230V CEE 16A socket - 1x 230V Schuko socket - - - - - Equipment: - AVR voltage regulator (thus even sensitive devices can be operated) - Electric start - Oil level sensor -Overload protection - Automatic start interface (ATS connection) for easy plugging in / retrofitting of an automatic start box - - - - - Other data: - Dimensions: 110 x 60 cm - Weight: 210 kg - - - - ...

W&P GUV Fermentation Interrupter Rational work/working time management Shifting working hours from night to day the goods are ready for baking in the early morning Optimal use of furnace capacity Improving the quality of the dough pieces Year of construction: 2011 digital control Dimensions approx. 1900 x 3200 x H 2500 mm, Equipped with HYGROMATIC humidity regulator Condition: used: Auction share: 1x GUV fermentation interrupter For connection to an external refrigeration unit (not included) More bakery equipment - new and used - can be found in our shop! International shipping costs on request!

Key data: 1500

warehouse no.: 503391 manufacturer: ARBURG type: Allrounder 470 C 1500-400 controller: Selogica year of construction: 2008 operation hours: 13847 h clamping force: 1500 kN distance between tie bars h x v: 470 x 470 mm size of mould plates h x v: 650 x 650 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 40 mm swept volume: 201 ccm injection pressure: 2000 bar equipment included: screen text german CEE-socket 16A CEE-socket 16A core pulling hydraulically 2x air valve 1x machine incl. belt conveyor machine incl. hopper loader machine incl. Handling machine incl. safety fencing machine incl. water flow regulator Anti vibration mounts interface EUROMAP 67 Schuko-socket 10A Schuko-socket 10A technical data robot-system handling type: Linear manufacture: Wittmann controller: W ...

Filter control valve, on-off valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, service unit combination, filter control valve -Manufacturer: Festo, maintenance unit with filter and control valve orig -Type: LFR-1/2-D-MIDI -Pressure: max. 16/12 bar -Number: 2x filter control valve available -Price per piece -Weight: 1,3 kg/pc.

Precision pressure regulating valve, pressure regulator FESTO LRP-1/4-0.7 159500 Operating pressure: 1 - 12 bar Pressure control range: 0.05 - 0.7 bar Pneumatic connection: 2x G1/4, 2x G1/8 ( pressure gauge ) New ! Dimensions: 50 x 50 x 110 mm

Remote Controller, Machine Control, Regulator ESAB MTA1 CAN ( MTA1CAN ) 0459491880 New ! Dimensions: 280 x 55 x 55 mm

Remote control, machine control, regulator CET BRUMOV DR 20 ( DR20 ) with 9.0 m cable used, tested ! Dimensions: 250 x 120 x 120 mm

Power regulator ELEK, EBEHAKO BR06 BR53 06DHS 400 V 50 Hz used, tested ! Dimensions: 145 x 145 x 120 mm

On-load tap-changer, heating regulator KIEBACK & PETER KNC2 24 V ( 24V ) ambient temp.: 0...50°C New ! Dimensions: 135 x 135 x 45 mm

Dual Inverter, Compact Inverter AMK AMKASYN KWD 2 Version 03.21 2x 2.0 kVA Input voltage: 540 - 650 V DC rated output voltage : 350 V 3AC, 0 - 800 Hz 1x Regulator card: AMK KW-R03 used, tested ! Dimensions: 320 x 200 x 55 mm

Dual inverters, compact inverters AMK AMKASYN KWD 2 Version 03.11 2x 2.0 kVA input voltage: 540 - 650 V DC rated output voltage : 350 V 3AC, 0 - 800 Hz 2x regulator card: AMK KW-R03 used, tested ! Dimensions: 320 x 200 x 55 mm

Dual Inverter, Compact Inverter AMK AMKASYN KWD 2 Version 03.21 2x 2.0 kVA Input voltage: 540 - 650 V DC rated output voltage : 350 V 3AC, 0 - 800 Hz 2x Regulator card: AMK KW-R03 used, tested ! Dimensions: 320 x 200 x 55 mm

Compact inverter AMK AMKASYN KW 20 Version 03.10 20 kVA Input voltage: 540 - 650 V DC rated output voltage : 350 V 3AC, 0 - 800 Hz 1x Regulator board: AMK KW-R03 used, tested ! Dimensions: 320 x 200 x 85 mm

Compact inverter AMK AMKASYN KW 20 Version 03.20 20 kVA Input voltage: 540 - 650 V DC Rated output voltage : 350 V 3AC, 0 - 800 Hz 1x Regulator card: AMK KW-R03 As good as new Dimensions: 320 x 200 x 85 mm

Pressure Booster, Booster Regulator SMC EVBA2100 Inlet pressure: 1 - 9.9 bar outlet pressure: max. 9.9 bar Dimensions: 300 x 160 x 160 mm

Compact Inverter AMK AMKASYN KW 20 Version 03.22 20 kVA Input voltage: 540 - 650 V DC Rated output voltage : 350 V 3AC, 0 - 800 Hz 1x Regulator card: AMK KW-R03 As good as new Dimensions: 320 x 200 x 85 mm

Compact inverter AMK AMKASYN KW 40 Version 03.21 40 kVA input voltage: 540 - 650 V DC rated output voltage : 350 V 3AC, 0 - 800 Hz 1x Regulator card: AMK KW-R03 used, tested ! Dimensions: 320 x 170 x 220 mm

Pneumatic valve, pressure regulator intermediate plate valve FESTO LR-ZP-A-D-1 35969 0 - 12 bar unused ! Dimensions: 210 x 55 x 45 mm