128,058 used machines on RESALE, but how to find them? Machine Search
Flushing compressor, flushing connections -Flushing connections: 15 -Controls: 11 -Packaged: in a wire mesh box -Sale: only complete set -Weight: 312 kg
REF-2357 WORTHINGTON CREYSSENSAC ROTARY-SCREW AIR COMPRESSOR Rotary-screw air compressor. Manufacturer: Worthington Creyssensac. Brand: ROLLAIR. Model: ROLLAIR 75. Compressor: - Rated power: 55kW/75HP - Refrigerated air volume: 9,000m3/h - Sound level: ± 70dB - Weight: ± 1,400kg - Compressed air outlet Ø: 2” - Operating pressure: 12.5 bar Compressor motor: - Manufacturer: LEROY SOMER - Model: AP180LGU-T - Power: 55kW/75HP - 2,945 Rpm - 400V/100A Complete with instruction manual.
Oil/water separator, oil-water separation system -Dimensions: 660/260/H700 mm -Weight: 18 kg
Compressor control, compressor control, base load switching circuit -Compressor control: for circuits with multiple compressors -Handover in its current condition as inspected -Dimensions: 220/320/H140 mm -Weight: 4 kg
Available in stock 1 x Used GrimmerSchmidt Compressor. The compressor was installed in a biogas valorization plant that stopped working. Now the equipment is stored in our warehouse. The equipment is used but in good working conditions. RPM: 6600 RPM Flow: 30 CFM Rating: 80 psig Main Motor Voltage: 460 / 380 V Main Motor Frequency: 50 Hz Main Motor Horsepower: 7.5 hp
Key data: 18 , 8 , 3
Screw compressor Mannesmann DEMAG SE 30 S 3 m³/min, 8 bar, 18.5 kW Good condition Test run carried out Ready for action
Key data: 250 , 4 , 45
Electr. Power: 250 KW Motor speed:1492 rpm Voltage: 400 V Weight: 5630 kg The compressors have been taken over in operational condition and are complete.
Drive power 110 KW Engine speed 1500 rpm Year of manufacture 2002 Voltage 400 V weight 2.580 KG The compressor has been dismantled in operational condition and is complete.
Auction-ID: A1-41275-16
voltage phase frequency. 400V /3 Ph/50 Hz volume rate of flow 3,54 m/min stage pressures 7,5
Screw compressor, make: Worthington Creyssensal, model: RLR 4000 AX2, motor: 30 Kw (40 hp), Bar max: 8, m3/h: 318, working hours: 16.159.
Item sold in NOT verified status. Auction-ID: A7-45347-660
feed pressure: 7 - 9 bar Effective free air delivery: 230/130 l/min L/min Receiver capacity: 10 l / bar weight of the machine ca.: 25 kg. Number of cylinders: 2 Stk. motor: 230V / 1,4KW V / KW range L-W-H: 600 x 310 x 510 mm Low-noise construction compressor 53 - 60dB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Airprofi 853/200 Compressor Maximum volume flow: 850 l/min Filling capacity approx.: 680 l/min Maximum pressure: 10 bar Container capacity 200 l Speed: 1240 1/min Motor power: 5.5 kW Weight: 139 kg Sound pressure level: 95 dB(A) G&STÜ-2018832
piston compressor ALUP Flow rate 665 L/min CW 5,5 Pressure 10 bar Container capacity 350 litres
Atlas Coco Compressor - GA 18 VSD ff - maintenance done in 2025 ️ General Description The Atlas Copco GA 18 VSD FF is a variable-speed (VSD) oil-injected screw compressor designed to deliver energy-efficient and reliable compressed air in industrial settings. \"Workplace / FF (Full Feature)\" version: Compact machine ready for use Integrated refrigeration dryer (dry air directly usable) ⚙️ Working principle Oil-injected rotary screw technology Variable speed drive (VSD) that automatically adapts the motor speed to the air demand Result: significant reduction in energy consumption ⚙️ Technical characteristics (typical GA 18 VSD FF) - Engine power: 18 kW (~25 HP) - Operating pressure: up to 13 bar - Air flow rate (FAD): up to ≈ 65 l/s - Noise level: ≈ 60–70 dB (low noise) - Power supply: 400 V three-phase - Integrated dryer: yes (FF) Equipment and technologies - Va ...
Screw compressor C9 Flow rate 1.1 m3/min 10 bar 7.5KW Hours 9000 Schematic E-Parts Compressor is unchecked.
Screw compressor Boge 400 V 11 KW 1.45 m3/min 10 bar Accessories : belts, filters, small parts The compressor goes to fault after switching on:
Fabr. No.: 181308 Equipment / Additional information: Flow rate: 40 m3 / h Compression end pressure: 0.6 bar Motor power: 1.5 kW / 1400 U/min.
Käser ASK 32 T with integrated cold dryer Screw compressor Age: 2008 Rated Output: 18.5 kW Max. working overpressure: 8 bar Motor speed: 2950 1/min Sigma Control Integrated refrigerant dryer
Wittig Compressor ROL 65 Pressure generator from 2000, complete (closed module) 1 available 357 m3/h, 8 bar. Manufacturer: Wittig GmbH Model: ROL 65 Type: piston compressor Serial Number: 920171/17 Flow rate [m3/h]: 357 Pressure outlet [bar]: 8 Power [kW]: 37 Year of construction: 2000 Running hours [h]: – Weight [kg]: 1.071 Dimensions LxWxH [cm]: 111x90x180
Spare parts package for Compressors and cold dryer from BOGE MATTEI and BEKO. Upon request single parts can be offered. Detailed photos can be provided. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Demag Compressor 080IIH Pressure generator from 1986, complete (closed module) 1 available 505 m3/h, 6 bar. Manufacturer: Mannesmann Demag Model No.: 080IIH Type: piston compressor Serial Number: 920 501 / 78 Capacity flow rate [m3/h]: 505 Pressure outlet [bar]: 6 Power [kW]: 45,5 Year of construction: 1986 Running hours [h]: – Weight [kg]: 1.978 Dimensions LxWxH [cm]: 246x122x143
maximum number of results exceeded
please refine your search
100 € 
