refrigeration compressor used for sale

Key data: 3

Volume flow 300 (50 Hz) / 360 (60 Hz). m³/h Pressure difference approx. +240 to +260 mbar (50 Hz). Engine power 3.0 kW (50 Hz) / 3.6 kW (60 Hz). Speed approx. 2850 (50 Hz) / 3370 (60 Hz). Current consumption (50 Hz) 15.9 A () / 9.20 A (Y). Degree of protection IP55 (standard, see type protection). Voltage 200 - 480 V Weight 53 kg

Compressor ALMiG VARIABLE 35 Screw Compressor Compressor ALMiG VARIABLE 35 Screw Compressor Manufacturer: ALMiG Type: VARIABLE 35 Year of Make: 2014 Volume flow: 1.00–6.05 m³/min Final pressure: 5–13 bar Motor power: 40.0 kW Engine speed: 1250–6500 rpm Serial Number: F1410719 / S0030700 Number of units: 2 Location: Pforzheim

feed pressure: 10 bar Number of working hours: 69.551 / 38.921 h total power requirement: 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 235 , 6 , 40

IHI TURBO OIL FREE COMPRESSOR, WATER COOLED Model : TRA20-235kW Origin : Fully Made in Japan Operating Condition Gas : Compressed Air Capacity : 40m³/min Suction Temperature : 35ºC (Design Point) Relative Humidity : 80% Discharge Pressure : 6barG Compressor Specification No of Stage : Three Output of Driver : 235 kW Voltage : AC415V / 50Hz / 3PH Noise Level : 85dB Starter System : Inverter Starter Cooling Water : Fresh Water Inlet Temperature : 32ºC Water Requirement : 35m³/h Dimensions L x W x H (mm) : 3,700 X 2,000 X 2,000 Weight : 7,100 kg

Screw compressor CompAir Type L07-13 Year of manufacture 2008 CE With compressed air dryer Make Knoll EKO MAK Power 7.5 kW Volume flow 0.69 m³/min. Step pressures 13 bar Suction pressure 1.0 bar Full assist current 15/18 amps Speed 3000 rpm. Voltage 400 Volt / 3 Phase / 50 Hz

Dimensions (L/W/H): 1950x690x1700 mm Weight: 451 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Alteco 1000 Liter tank Pressure vessel 11 bar

Atlas-Copco 1500 liter tank pressure vessel

Compressor: 13 bar Dryer Atlas-Copco FD220 14 bar Volume flow rate: 8.52 m3/min Power imput: 50 kW

2 units semi-hermetic reciprocating compressors by DWM Copeland, model D6SJ1-400X-AWM/D. Technical data: 6-cylinder reciprocating compressor Displacement: approx. 127 m³/h Speed: 1450 rpm at 50 Hz Voltage: 380–420 V (50 Hz) / 440–480 V (60 Hz) Protection class: IP54 Max. operating pressure: 28 / 22.5 bar (H/L) Year of manufacture: 02/2003 Manufacturer: Copeland (Made in Belgium) Condition: Used, removed from system. Signs of storage and use present. Functional test not performed. Sale in current condition, without warranty or guarantee.

Oil-water separation system, oil-water separator, condensate separator The cost-effective and permanently reliable solution to the problem is usually oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge. -Number: 1 filter available -Price: per piece -Dimensions: 460/500/H950 mm -Weight: 32 kg

Emulsion splitting plant, oil-water separation system -The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations regarding sewer discharge. -Dimensions: 750/350/H830 mm -Weight: 10 kg

Side channel blower, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower side channel blower -Type: Elmo-G 2BH1 603-1AC11-Z -Drive: 2.2 kW -Speed: 2860 rpm -Connection input: Ø 38 mm -Connection output: Ø 50 mm -Dimensions: 380/380/H380 mm -Weight: 28 kg

Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, screw block compressor stage from compressor type SL 270 -Screw block: type BS 430 -Final pressure: max. 15.0 bar -Hole circle: Ø 295 mm / M20 / Ø 740x22 mm -Shaft: Ø 100 x 200 mm -Dimensions: 1200/850/H790 mm -Weight: 917 kg

Compressed air tank, pressure container, pressure tank, compressed air boiler, pressure vessel, compressor tank, pressure accumulator for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, pressure accumulator with filter block from compressor type SL 270 -Pressure accumulator: Type 306022 V 230 L -Final pressure: max. 15 bar -Hole circle: Ø 240 x 22 mm -Filter units: see photos of individual components -Dimensions: 1600/980/H1270 mm -Weight: 289kg

Gate valve for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, gate valve from compressor type SL 270 -Solenoid valve: type 644.0044.01 -Final pressure: max. 14 bar -Hole circle: Ø 295 x 22 mm -Dimensions: 415/340/H440 mm -Weight: 25kg

Screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw compressor, suction regulator relief valve, relief valve -Manufacturer: Boge, screw compressor intake regulator relief valve from compressor type SL 270 -Type: 644 0041 01 -Pressure: 0.5 - 10 bar bar -Dimensions: 195/100/H140 mm -Weight: 2.0 kg

Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer:BEKO, oil-water separation system Oil and water separation device type Öwamat KT 05 -Accessories: incl. Oekosorb replacement filter, see photos -Dimensions: Ø 680 x 1130 mm -Weight: 73 kg with pallet

Compressor, compressed air unit, piston compressor, quiet running compressor, compressor for dentistry, quiet running compressor -Manufacturer: Jun-Air, quiet compressor type OF301 -Motor power: 250 W -max. pressure: 8 bar -Number: 2x compressor available -Price: per piece -Dimensions: 220/160/H230 mm -Weight: 9.2 kg/piece

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Demag / CompAir, screw compressor type 350WS / EK285NK without drive motor -Volume flow: 35.1 m³/min -Max. pressure: 7 bar -Drive shaft: Ø 90 x 120 mm -Individual components: see photos -Dimensions: 1100/670/H1000 mm -Weight: 1032 kg

Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge -Dimensions: 750/600/H950 mm -Weight: 80 kg

Capacity m3/min: 2.5, Nominal operating pressure (bar): 7.5, Maximum discharge pressure (bar): 8.7, Power kW: 16.5, Voltage V: 380-415 , Current: 31.6, Phases / Frequency Hz: 3 / 50, Control voltage V AC: 48

Oil-free screw compressor Atlas Copco ZR75FF Dryer integrated 75 kW 8.35 bar 11 m3/min Year of Make: 2004 Hours: 44,153

Kaeser DSDX243SFC screw compressor 132 kW with 8.5 bar and 26.90 m3/min. Inverter integrated. New stage installed at around 45,000 hours

SCREW COMPRESSOR ✔️ Brand: Gardner Denver ✔️ Model: L110RS-13A ✔️ Year: 05/2014 ✔️ Version: V3 ✔️ Fluid: Air ✔️ Power supply: 400V – Three-phase – 50 Hz ⚙️ Key features: Flow rate: ≈ 20.8 m³/min Engine power: 110 kW Speed: ≈ 2980 rpm Weight: ≈ 2770 kg

A complete compressor system is available. 1) Screw compressor German Blast 22, year of manufacture: 2011, motor power: 22kW, operating pressure: 10bar, air flow rate: 190m³/h, machine dimensions X/Y/Z: approx. 1100mm/750mm/1450mm, weight: approx. 500kg, operating hours: 27305h, load hours: 10050h. 2) Compressor Rotorcomp, max. operating pressure: 15bar, max. operating temperature: 110°C. 3) Pressure vessel IPL, year of manufacture: 1997, volume: 1000l, max. operating pressure: 10.5bar, max. operating temperature: 50°C. 4) Air dryer German Blast BT-220. 5) Water separator. Documentation available. An on-site inspection is possible.

Continuously serviced, excellent condition. Atlas Copco ZR160 VSD screw compressor With speed-controlled drive, adsorption dryer MD400 Compressor: Manufacturer: Atlas Copco Type: ZR 160 VSD Max. operating pressure: 8.6 bar Variable speed drive Cooling water consumption 2.1 liters/s Air supply: 27 m3/min Water cooled Oil free Power: 163 kW Year of construction: 2002 Uptime: 122499 Last service: September 20, 2023 Refrigerator: Manufacturer: Atlas Copco Type: MD 400 W Year of construction: 2002 Max. operating pressure: 10.5 bar Empty volume: 199 l

ALMiG Screw compressor BELT 30-10 | 30 kW | 10 bar | Industrial quality For sale is a powerful and reliable screw compressor from the ALMiG brand (Made in Germany) – ideal for industry, production or larger workshops. Technical data: Manufacturer: ALMiG Kompressoren GmbH Type: BELT 30-10 Year of Make: 2009 Motor power: 30 kW Operating pressure: 10 bar Volume flow: 4.12 m³/min Drive: Belt drive

II sell a BITZER screw compressor. Fully functional. The compressor has 18470 working hours. It worked in a production hall on a chiller with a water condenser. The compressor has a power supply of 660 - 720 V The compressor worked with R 134a refrigerant.

SCREW AIR COMPRESSOR model KAESER SK 19 with Vertical tank Lt. 750 second hand machine in Excellent working condition motor power Hp 15 ( Kw 11 ) working pressure bar 10 volt. 380/50

Functionality must be checked, possibly usable as a spare parts carrier.

Compressor Atlas Copco Type GA 11 C Technical data: - Data: see nameplate

MTA Chiller with the following specifications: Type: MTA PNP 280 Power: 611 kW Year of manufacture: 2009 Weight: 5.5 Ton 2x Bitzers Includes refrigerant coolant (R134)/gas.

Bitzer OSNA8571-k New open screw compressor for R717 (NH3). All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

A compressor is offered. Drive power: 18.5kW, Delivery rate: 2910ltr/min, Max. operating pressure: 8bar. Dimensions X/Y/Z: approx. 1287mm/799mm/1296mm, Weight: approx. 540kg. Inspection possible by appointment.

Stock# UG6400 Used set of air compressor by Kaeser model FSG520-2W with air dryer by Hybritec type Compact model DTI 668/902. Compressor details: Power consumption: 355 kW Water cooled. Working output pressure up to 10 bar. Flow output: 50.00 m3/min Shipping dims: 3190 mm x 2095 mm x 2125 mm x weight 5900 kg Dryer details: Hybritec Compact model DTI 668/902. air flow - up to 66.7 m3/min Working pressure 5/10 bar Power consumption: 34.5 kW

Compressor - Manufacturer: Renner GmbH Kompressoren, Germany - Model: RS-Top-5,5 - Type: Oil-injected rotary screw compressor, belt drive - Motor Power: 5.5 kW - Operating Pressure: 10 bar - Free Air Delivery at 10 bar: 0.78 m3/min - Compressed Air Connection: G 1/2 inch Compressed Air Storage Tank - Manufacturer: Airpress - Model: 200L/11B Vert - Reference: 5015 - Capacity: 200 litres - Working Pressure: 11 bar - Orientation: Vertical - Construction: Powder-coated carbon steel Hours: 3500 Find more here - .ucymachines/ Contact us at - sales@ucymachines

A Mahle compressed air compressor including a refrigerated dryer is available. Flow rate: approx. 96m³/h, max. operating pressure: 10bar, machine dimensions X/Y/Z: approx. 1500mm/800mm/800mm, weight: approx. 350kg, operating hours: approx. 3838h. An on-site inspection is possible.

output: 5,5 kW Max. operating pressure (PS): 11 bar Rated engine speed: 2930 1/min voltage: 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: kW feed pressure: 10 bar volume capacity: 5,0 m³/min total power requirement: 7,5 kW weight of the machine ca.: 0,4 kg Screw Compressor - Operating hours (readout): 17,442 / 22,500 - Sound-dampening enclosure The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LMF Compressor 40 bar Capacity 1,600 m3/h CW 250

Compressor system consisting of 2 compressors + 2 air dryers professionally installed in two adjacent containers. 2 x Manufacturer: Kaeser Type BSD 83 Year of construction 2016 Operating hours approx. 14,950 hours Rated power 45 kW Operating overpressure 12.0 bar 2x air dryer Manufacturer: Mark Type MDX 15000 Conatiner Overseas 2 pieces standing next to each other Total dimensions approx.: Width 5m, Height 2.8m, Length 6m Weight estimated (total weight) 10to

Specifications Brand: Atlas Copco Type: GX5C FF with integrated refrigeration dryer Kind: Screw compressor Serial number: AII642955 Chassis number: 8152101195 Year of construction: 2004 Cooling: Air-cooled Weight: 198 kg. Assets: 5.5 kW Noise level: 64 dBA Work pressure: 10 Bar Compressed air: Capacity Approx. 10.0-10.1 liters/second Length mm: 145cm Width mm: 55cm Height mm: 130cm Machine status: Very good Electrical connection: 3 phase Missing parts: No Photos/video available: Photos available 10.2.192

Specifications Brand: Boge Type: C3LR Kind: Screw compressor, air-cooled Max. final pressure: 10 bar Chassis number: 5063340 Year of construction: 2013 Capacity: 0.24 m³/min. = 8.3 CFM Engine speed: 1,500/ min. Drive power: 2.2 kW (3 hp) Pressure vessel: 90 liter Voltage: 400V / 50Hz (3-phase) L x W x H: 1185 x 550 x 1010 Sound level: 61 dB (A) Weight: Approx. 130 kg Residual oil content: < 3 mg/m³ Connection: G ½” (ball valve) Cooling air volume: 600 m³/h Ambient temperature range: +5 to +40 °C Photos/video available: Photos available 10.2.195

Specifications Brand: Ingersoll Rand Type: 2339531 Kind: Compressor with Refrigerated Dryer Year of construction: 2011 Operating hours/meters: 6107 Weight: 188 + 27 kg Assets: 3 kW/ 4 HP Air pressure: 14 bar Electrical connection: 400/ 230V, Photos/video available: Photos available 10.2.197

Specifications Brand: Ingersoll Rand Type: 2339531 Kind: Compressor with Refrigerated Dryer Year of construction: 2011 Operating hours/meters: 6107 Weight: 188 + 27 kg Assets: 3 kW/ 4 HP Air pressure: 14 bar Electrical connection: 400/ 230V, Photos/video available: Photos available 10.1.197

for gas turbine - 19 bar - 75 KW

feed pressure: 8 bar : 3,2 m³/min Number of working hours: 32.337 h total power requirement: 18,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An oil-injected stationary compressor CompAir is available. Stages: 2, Air flow rate: 17m³/min, Max. operating pressure: 12bar, Machine dimensions X/Y/Z: approx. 3300mm/1800mm/2000mm, Weight: approx. 3900kg. Documentation available. An on-site inspection is possible.