134,669 used machines on RESALE, but how to find them? Machine Search
Manufacturer: Boge Kompressor einheit mit Trockner und Behälter, Type: S 20-2, Year: ca.2014, Control: Boge, Screw compressors: yes, Operating hours: 8850, Running idle houres: 2500, Volume flow m³/min: 2,24, Final sealing pressure bar 1: 10, Power input kW: 15, Compressed air boiler litres: 1000, Required space L x W x H mm: 15, FREE TEXT: inkl.Drucklufttrockner und 1000 Liter Kessel und Ölwasserabscheider und Feinstfilter, Year :ca.2014
Sell several CO2 compressors, in good working order. Make bid for the lot
A very clean and working vacuum compressor. 2m3 per hour, 0,85 bar. One faze 220 V. Can ship worldwide.
Motor power 11kW/ max. ultimate pressure 13bar Regular maintenance
Engine power 11 kW / max. final pressure 13bar Regular maintenance Engine should be replaced promptly
Compressor, compressor two-stage type S6H-20.2Y, displacement 73 m3/h For blast freezers or deep freezes. Needed two pcs., checked in stock.
power requirement: 37 + 55 kW Pressure power: 8 bar EXW 92536 Pfreimd - loaded free on truck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Power: 7,5 KW Receiver: 270 L weight of the machine ca.: 180 Kg dimensions of the machine ca.: 1700x600x1270 mm feed pressure: 10 bar liter capacity: 850 l/min connected load frequency: 400 V The UWM 7.5 / 850/270 K30 + start box with K30 pump, V-belt drive, is suitable ideal for use at home, in the workshop, in industry and for heavy work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Power: 7,5 KW Receiver: 500 L weight of the machine ca.: 300 kg dimensions of the machine ca.: 1,7x 0,6 x 1,45 m feed pressure: 16 bar liter capacity: 870 l The UWM 10/870/500 K50 + Startbox is equipped with a K50 pump. Note that this is a high-pressure version (especially for trucks or places where higher pressure is required), Industry and hard work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The UWM 10/870/500 is available with 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed pressure: 13 bar Effective free air delivery: 690 L/min Receiver capacity: 270l / 16bar l / bar weight of the machine ca.: 199 kg. motor: 400V / 5,5KW V / KW range L-W-H: 1,7 x 0,6 x 1,27 mm It is a high pressure version (especially for truck service or for heavy work). OPTION: The UWM 7.5/690/270 can be equipped with a starting unit (star-delta circuit). Surcharge: EUR 379 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed pressure: 8 bar Effective free air delivery: 120/220 L/min Receiver capacity: 50l / 10bar l / bar weight of the machine ca.: 24 kg. Number of cylinders: 1 Stk. motor: 230V / 1,5KW V / KW range L-W-H: 1,1 x 0,32 x 24 mm This compressor comes standard with: - Maintenance-free oil-free engine. - Safety valve. - Reduction valve with pressure gauge and coupling. - Drain cock on the tank. - Italian compressor of the highest quality. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed pressure: 8 bar Effective free air delivery: 125/85 L/min Receiver capacity: 24 / 8 l / bar weight of the machine ca.: 22,5 kg. Number of cylinders: 2 Stk. motor: 230V / 0,75KW V / KW range L-W-H: 600 x 310 x 510 mm Exhibition machine This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB (Suitable for indoor use) Equipped with: ? safety valve. ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Two stage compressor Bitzer S4N-8,2Y +ECO + K203H. Comperssor is working and in very good condition. Just need to connect the economizer and condenser.
feed pressure: 8 bar Effective free air delivery: 250/350 L/min Receiver capacity: 200l / 10bar l / bar weight of the machine ca.: 105 kg. Number of cylinders: 2 Stk. motor: 230V / 2,2KW V / KW range L-W-H: 1140 x 510 x 920 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
On offer are 2 pieces of CompAir compressor systems with cooler and dryer as shown in the pictures. Price refers to an investment. If you have any questions, please contact us.
Offer 25979 Operating hours 16550 h - Operating pressure 10 bar - Delivery rate 15.9 l/sec - Drive 400 V / 7.5 kW - Motor speed 3000 rpm - Air tank 250 L - Space requirement approx. W 700 x H 1830 x D 1050 mm - Weight approx. 250 kg
Kompressor / Compressor Gardner Denver KTA100-1C Baujahr / Year 2007 - SN. 2708758 100 m3/h
A total of 7 L-Unite Hermetique (Tecumseh) compressors including Johnson Controls pressure regulators and 6 Bitzer heat exchangers are available. 1) Tecumseh TAG4546Z compressor, year of manufacture: 2012, max. operating overpressure: 20 bar, test pressure: 25 bar. 2) Heat exchanger Bitzer K123H, year of manufacture: 2012, refrigerant volume: 5.1l, cooling medium volume: 0.9l, max. pressure refrigerant/cooling medium: 33bar/10bar, max. temperature refrigerant/cooling medium: 120°C/95°C, min. temperature: -10°C. 3) Pressure regulator Johnson Controls P78LCW 9300, documentation available. On-site inspection is possible.
power capacity: 4 kW feed pressure: 10 bar liter capacity: 490 Lieter / min Receiver capacity: 350 l motor speed: 1500 U/min voltage: 400 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,4 x 0,8 x 1,5 m • 2 piston-compressor with tank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ecoair C10 screw compressor, replacement machine
Key data: 132 , 40 , 750
Year of construction 2015 Capacity: 750 m³/min. Delivery pressure: 40 bar Rotation speed 330 rpm. Electric motor 132 kW incl. refrigeration dryer The PET compressor is in mint condition, with few operating hours
Filter fitting, filter unit COMPAIR for compressor systemsCompressed air filterType: CF 0087B ZPFabric no: 3363006 / 05 / 005Operating pressure: max. 16 barThreaded connection: G 1 1/2Flow rate: approx. 8.5 m³/min Filter element no: CE 0087B- Filter housing made of aluminiumWeight: 5 kgDimensions L x W x H 125 x 110 x 420 mmgood condition; used
Specifications: - Compaction pressure 10 bar - Volume flow 530 l/min - Power 4.0 kW - Current consumption 8 A - Voltage 400V, 50 Hz, 3~ - Speed 2,900 rpm
Kaeser CSD 122 SFC screw compressor built-in inverter 2.2-10.5m3/min, 75kW, 8.5bar Manufacturer: Kaeser Type: CSD 122 SFC Year of manufacture: 2006 Operating pressure: max 8.5bar Power: 75kW Capacity: 2.2 - 10.5 m3/min Operating hours: 96244 h (Last service: 88854 h) Inclusion dimensions: 1100 x 2200 x 1900 mm Net weight: 1600 kg
feed pressure: 8,0 bar intake capacity: 180 L/min Effective free air delivery: 112 L/min Receiver capacity: 6,0 Ltr. motor: 230 V power capacity: 1,1 kW weight of the machine ca.: 14,0 kg. dimensions of the machine ca.: 380 x 310 x 490 mm Description : - portable craftsman piston compressor - permissible duty cycle up to 30% - 1-stage, direct-coupled, single-cylinder airend - Compressor mechanics working completely OIL-FREE - Very compact design for easy handling - Finely ribbed cylinder and cylinder head - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - the start-up relief takes place via a mechanical vent valve The standard scope of delivery includes: - an automatically regulating pressure switch - a condensate drain plug - a pressure reducer - two pressure gauges - Safety valve - pre-assembled connection cable with p ...
17 m³/min compressor COMPAIR R 180 TS-Z Properties: Type R 180 TS-Z ID number 449003/10 Built-in compressors 10 Order no. 10195540 Compression medium AIR/LUFT Length 2800 mm Width 2050 mm Total height 2100 mm Weight 3860 kg Flow rate 17.0 m³/min Suction pressure 1 bar Step pressures 2.4 /1.2 bar g Speed 1000 min ̄¹ Installed engine power 110 kW
feed pressure: 10,0 bar intake capacity: 345 L/min Effective free air delivery: 228 L/min Receiver capacity: 50,0 Ltr. motor: 230 V power capacity: 2,2 kW weight of the machine ca.: 51,0 kg. dimensions of the machine ca.: 800 x 390 x 750 mm Description : - mobile craftsman piston compressor - High-quality processed 1-stage compressor block - with 2 cylinders and optimal efficiency - Finely ribbed cylinder and cylinder head for optimal temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Directive - all fittings are sealed with easily removable special adhesive and can easily be exchanged if necessary - the start-up relief takes place ...
Compressor Type Q52 - 8.0 W Properties: Type Q52 - 8.0W Identification number 052-000103 Order no. 14988/ 14989 Compression medium AIR/LUFT Length 2500 mm Width 1800 mm Total height 2000 mm Weight 2600 kg Volume flow 51.6 m³/min Suction pressure 1 bar Full load current 525 A Step pressures 8 bar g Speed 60600 min ̄¹ Installed motor power 300 kW Voltage 400 V Phase 3 Ph Frequency 50 Hz
Compressor Type Champion 180 TS Properties: Identification number 449001/158 Order no. 10095340 Built-in compressor 158 Compression medium AIR Length 3050 mm Width 2100 mm Total height 2100 mm Weight 3860 kg Flow rate 17.0 m³/min Suction pressure 1 bar Step pressures 22 / 12 bar g Speed 1000 min ̄¹ Installed engine power 110 kW
feed pressure: 10,0 bar intake capacity: 539 L/min Effective free air delivery: 377 L/min Receiver capacity: 90,0 Ltr. motor: 400 V power capacity: 3,0 kW weight of the machine ca.: 80,0 kg. dimensions of the machine ca.: 1040 x 450 x 850 mm Description : - mobile craftsman piston compressor - High-quality processed 1-stage compressor block - with 2x cast iron cylinders and optimum efficiency - Finely ribbed cylinder and cylinder head - for optimum temperature dissipation - low compressor speed to reduce the compression temperature and minimizing wear and tear - Very low residual oil content in the compressed air thanks to precision piston rings - Generously dimensioned solid rubber wheels and castors at the front - the start-up relief takes place via a mechanical vent valve - Powder-coated compressed air tank in RAL 7035 - Built in accordance with the European Pressure Equipment Direc ...
Compressor type Champion 135 TS Volume 12.8 m³/min Properties: Identification number 449001/50 Order no. 50352400 Built-in compressor 50 Compression medium AIR Length 2400 mm Width 2400 mm Total height 2100 mm Weight 2480 kg Volume flow 12.8 m³/min Suction pressure 1 bar Step pressures 1.8 / 7 bar g Speed 1000 min ̄¹ Installed motor power 75 kW Motor revolutions 1000 rpm
Compressor COMPAIR L22 SR-10 Volume 2.86 m³/min Properties: Identification number 100016088/0009 Built-in compressor 6115 Order no. 10698941 Compression medium AIR/LUFT Length 800 mm Width 700 mm Total height 1400 mm Weight 355 kg Volume flow 2.86 m³/min Suction pressure 1 bar Step pressures 10 bar g Speed 3600 min ̄¹ Installed motor power 22 kW Voltage 400 V Phase 3 Ph Frequency 50 Hz
Screw compressor Kaeser type DSG 290-2 SFC A Properties: Type DSG 290-2 SFC A Order no. 4500217106 Length 3450 mm Width 1800 mm Total height 2400 mm Material No. DSG2.3 Manufacturer Serial No. 1117 Rated power 200.0 kW Speed 2982 min ̄¹ Max. operating overpressure 8.5 bar Ab. Ambient temperature min./ max. 3/40 °C
gebr. Compressor, Fabr. Kaeser, Type SXC 8, YOC 2010 Operating pressure 11.0 bar Power 5.5 kW
Oil-free Screw Compressor Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter COMPAIR D75HRS Screw Compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75kw power, air flow: 11.4 m3/min / 684m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2016.11 hours: 46000 Drive power: 75Kw Pressure 10 bar Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Voltage: 400v 50Hz 3 phase 85A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high.
Rated power: 75kW, max. operating overpressure: 8.5bar, speed: 3000rpm, operating hours: 75122h, load hours: 72719h. The machine requires bearing replacement. Documentation available. An on-site inspection is possible.
Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible.
Two compressors Kaeser are available. 1) Kaeser CSD 102 T SFC, year of manufacture: 2002, rated power: 55kW, max. operating pressure: 8.5bar, refrigerant: R134a, refrigerant quantity: 3.1kg, operating hours: approx. 132150h, load hours: approx. 129858h. 2) Kaeser BS 61, year of manufacture: 2001, rated power: 31kW, max. operating pressure: 8bar, operating hours: 91889h, load hours: 78711h. Documentation available. An on-site inspection is possible.
power capacity: 7,5 kW feed pressure: 10 bar volume capacity: 815 dm³ /min total power requirement: 7,5 kW weight of the machine ca.: 0,4 kg Alup piston compressor - Tank 350 liters - Soundproof housing (68 dB(A) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Two identical Blitz compressors are available. Motor power: 22kW, max. operating pressure: 10bar, flow rate: 3m³/min, weight: approx. 500kg. Documentation available. An on-site inspection is possible.
Compressor system / compressed air system composed of: Compressor Type STA-010 Maximum pressure 10 bar Output 0.9m³ per min incl. pressure tank 350l (14BAR) with filter
Air Pressure: 40 bar // Delivery Rate: 1630 m³/h
Air Pressure: 40 bar // Delivery Rate: 950 m³/h
An Atlas Copco piston compressor is available. Motor power: 4kW, max. operating pressure: 11bar, intake capacity: approx. 633l/min, delivery rate at 7bar: approx. 412l/min, speed: 1000rpm, tank capacity: 270l. Machine dimensions: approx. 1500mm/500mm/1200mm, weight: approx. 125kg. Documentation available. On-site inspection possible.
output: 30 kW suction power: 4.200 l/min turning speeds: 5.092 U/min overpressure: 10 bar dimensions of machine L x W x H: 1,72 x 0,90 x 1,60 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A mobile diesel screw compressor unit CompAir, suitable for construction site use, is available. Volume flow: 20m³/min, max. operating pressure: 24bar, motor power: 224kW, engine: Cummins QSB6.7, chassis: height-adjustable, fuel tank capacity: 350l. Machine dimensions: approx. 5500mm/2000mm/2700mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible.
Final compression pressure: 10 pe/bar Speed: 745 1/min Volume flow: 3455 dm³/min Motor power: 22 kW
A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible.
maximum number of results exceeded
please refine your search
