recycling plastic used for sale

Year: 2006 - technically efficient, ready to work – after full service - possibility of mounting 3 milling heads - top and bottom chiseling - control via PLC - automatic machining process

Year: 2000 - technically efficient, ready to work – after full service - 4 heads - support arms

PLASTIC WASHING. LINE for GRAVIMETRICAL SEPARATION, including:, collection hopper, auger, STAINLES STEEL GRAVIMETRICAL SEPARATION TANK, size mm.5.800 x 1.600 ca, n.4 moving rolls, sinking screw, drained screw for collection of floating material, n.2 additional sinking screws, lifting screw for sunk material, n.2 TECNOFER CENTRIFUGAL DRYERS in sequence, 18,5 kw, 720 x 1.500 mm, connection screws, collection hopper, sucking unit, The line is offered as is, where is, Vertical mixer available separately, capacity: ca.500 kg/h depending on material and contamination

Key data: 4000 kN, 763 g/PS, 60 mm

Year of Make: 2000 Clamping force: 400 tons. Shot volume: 848 cm³ Screw diameter 60 mm Injection pressure increased: 2,421 bar Good condition, immediately available

Key data: 450 kN, 80 g/PS, 30 mm

Year of Make: 2001 Clamping force: 45 tons. shot volume: 99 cm³ shot weight: 80 gr./PS Screw diameter: 30 mm good condition

Key data: 250 kN, 29 g/PS, 22 mm

Year of Make: 2005 Clamping force: 25 tons. Capacity: 38 cm³ Screw diameter: 22 mm Good condition

Key data: 500 kN, 95 g/PS, 30 mm

Year of Make: 2005 Clamping force: 50 tons. shot volume: 106 cm³ shot weight: 95 gr./PS Screw diameter: 30 mm with take off robot Good condition

3 x Ferromatik injection moulding machines Ferromatik K155, built in 1999 Ferromatik K275S, built in 2000 Ferromatik K200, built in 2000

Guillotine, reel slitters for paper and plastics 50 T, Working width 2.500 mm, Working height 850 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulik pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., See item [RES100](.germanplast.eu/listings/4115633-guillotine-reel-slitter) for full description., Force: 50 T

GUILLOTINE PAPER AND FILM REEL SLITTER 50 T, Working width 2.500 mm, Working height 1.250 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., See item [RES100](.germanplast.eu/listings/4115633-guillotine-reel-slitter) for full description., Force: 50 T

Guillotine, reel slitters for paper and plastics 2500x850mm, Working width 2.500 mm, Working height 850 mm, Cutting force 2x17,5 Ton., no.2 pumps 30 + 30 l/min, Pump volume 21+ 21 ccm, Speed up 84 mm/sec, Speed down (80 Bar) 20-40 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T

Guillotine, reel slitters for paper and plastics 35 T, constructed in sturdy painted steel,, Working width 2.500 mm, Working height 1.250 mm, No.2 pumps 30+30 lt/min Volume 21+21 ccm, Speed up : 84 mm/sec, Speed down : (80 Bar) 40-20 mm/sec, Oil tank 175 lt, Cutting force 2x17,5 Ton., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Increased speed system, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T

Guillotine, reel slitter for paper and plastics 25 T, Working width 1.500 mm, Working height 850 mm, Cutting force 1x25 Ton., 7,5 Kw drive 400V 50 Hz, No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, OIl tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 25 T

Guillotine, reel slitters for paper and plastics 50 T, Working width 3.000 mm, Working height 1.250 mm, No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 41-20 mm/sec, Oil tank 255 lt., Cutting force 2x25 Ton., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50To, installed power - used power in work: about 60-65% : 15

Guillotine, reel slitters for paper and plastics 30T, Working width 1.500 mm Working height 1.250 mm Cutting force 1×30 Ton., No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, Oil tank : 135 lt. Single piston with 2-sides racks to avoid any oscillations and swaying 7,5 Kw drive 400V 50 Hz Safety devices included : Emergency STOP button+ pull-rope STOP+ Knife protection + 2-hands operation + protection grids + hydraulic knife locking system. hydraulic pack can be lodged on top for space saving Complete with control panel User’s manual, drawings, CE compliance for overseas transport, you will need an out-of-gauge 20’fcl Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Size for transport: LxWxH 2,5 x 1,5 x 2,50 m. + 0,8 x 0,6 x 1,0 m. (hydrauluc pack), Force: 30 T, width: 1.500 mm.(59.06), height (cutting): 1.250  ...

Guillotine, reel slitter for paper and plastics 60 T, Working width 3.000 mm, Working height 1.500 mm, Increased speed system, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T

Guillotine, reel slitters for paper and plastics 60 T, Working width 3.500 mm, Working height 1.500 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15

Guillotine, reel slitters for paper and plastics 60 T, Working width 3.500 mm, Working height 2.000 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T

Guillotine, reel slitters for paper and plastics 35 T, Working width 2.000 mm, Working height 1.500 mm, Increased speed system, Cutting force 2x17,5 Ton., no.2 pumps 30 + 30 l/min, Pump volume 21+ 21 ccm, Speed up 84 mm/sec, Speed down (80 Bar) 20-40 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T

Guillotine, reel slitter for paper and plastics 35 T, Working width 2.000 mm, Working height 1.250 mm, Increased speed system, Cutting force 2x17,5 Ton., no.2 pumps 30 + 30 l/min, Pump volume 21+ 21 ccm, Speed up 84 mm/sec, Speed down (80 Bar) 20-40 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T, availability: now in stock, working width: 2000 mm, conditions: new machine, type: compliant with EU safety regulations

Guillotine, reel slitters for paper and plastics 35 T, Working width 2.000 mm, Working height 850 mm, No.2 pumps flow 30+30 lt/min, Pumps volume 21 + 21 ccm, Speed up to 84 mm/sec, Speed down:(80 Bar) 20-40 mm/sec, Cutting force 2x17,5 Ton., 9 Kw drive 400V 50 Hz, Oil tank 175 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T

Guillotine, reel slitters for paper and plastics 30 T, Working width 1.500 mm, Working height 850 mm, Cutting force 1x30 Ton., 7,5 Kw drive 400V 50 Hz., No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, Oil tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 30 T

Guillotine, reel slitters for paper and plastics 25 T, Working width 1.500 mm, Working height 1.250 mm, Cutting force 1x25 Ton., 7,5 Kw drive 400V 50 Hz, No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, OIl tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 25 T

Guillotine, reel slitters for paper and plastics, - These reel splitters are particularly recommended to reduce the size of scraps before a further recycling process. They are ideal for paper, plastic, fabric, rubber, polylaminated, AL foil, in the shape of REELS, BALES, LOOSE MATERIAL, FIBERS, and more., - Proposed in different standard dimensions and cutting forces, or bespoke to project, these machines feature a sturdy steel structure, top quality components and are constructed according to the strictest EU regulations to perform at their best and keep their value in the years with the simplest maintenance., - Sturdy and reliable, these guillotines give excellent performances even on lower tonnage, for paper and plastic film reels., - with increased speed system, our guillotines can double the work done, compared with other models., - One operator is needed to work in full safety cond ...

Engel injection moulding machine ES 1350 / 275 HL built in 2000 for sale.

Year: 2007 - technically efficient, ready to work – after full service - disc cutter: 250 mm - 4 CNC axes - working height: 200 mm - profile recognition system - 2 burr removal knives (top + bottom) - infeed/outfeed table

TECHNICAL DATA OF THE MACHINE General Clamping force: 50 t Year of manufacture: 2006 Control: NC4 Weight: 2,700 kg Dimensions (L × W × H): 3.8 × 1.1 × 2.1 m Injection unit – .../200 Screw diameter: 22 mm Injection volume: 41.8 cc Specific injection pressure: 2,800 bar Closing system – 50/... Clamping force: 50 t Tool plate dimensions: 520 × 520 mm Clearance between columns: 355 × 355 mm Tool height: 210 mm Opening Distance: 400mm Maximum Plate Distance: 610mm

Line for filling delicatessen products into plastic - trays, consisting of:, Vessel filling system, brand Waldner, type 12.3, year 2011, 2-track (2 different formats) – however, only single-track operation is possible., Format section 1: Round cup diameter 100mm (including edge) height 80mm and 60 mm, Format section 2: rectangular cup 185mm long 135 mm wide (incl. edge) 35mm deep, The shells are sealed with film from the roll, Roll magazine about 500mm long, 400mm wide, Space requirement Waldner: approx.: 2,100 m 2,100 mm, Discharge belt of Waldner: approx 1,800 mm, Dosing of liquid and free-flowing components:, The plant has two filling heads, which are filled via piping directly from the boiler., The pipe system can be fully purged., The toad line and Maso – Sinus Pump, type SPS 3, are included in the scope of delivery., Feeding of the multi-head weigher using two belt conveyors:, ...

Extruder + electric cabinet output: 200 kg Heads not included Winder not included

Injection Molding Machine Specifications 1. Main Machine Parameters Clamping force: 25 t Tool clamping system: 25 / ... Tool plate dimensions: 400 × 400 mm Clearance between columns: 220 × 220 mm Maximum Plate Distance: 425mm Ejector stroke: 95 mm Ejector force: 18 kN Year of manufacture: 2001 Weight: 2000 kg Dimensions (L × W × H): 2.9 × 0.9 × 1.9 m 2. Injection Unit Injection Unit: ... / 60 Screw diameter: 18 mm Injection volume: 20cc Injection weight: 18 g Specific injection pressure: 2500 bar Screw L/D ratio: 24.5 3. Controls Control System: Selogica

Year: 2006 - technically efficient, ready to work – after full service - 2 pneumatic motors (top + bottom) - disc cutter: 250 mm - 2 CNC axes - working height: 140 mm - profile recognition system - 2 burr removal knives (top + bottom) - infeed/Outfeed table

We are a company engaged in the international trade of used injection molding machines and peripherals. We specialize in the transport of machines up to 3500t of clamping force and the relocation of industrial plants throughout Europe. Offered: Krauss Maffei 125-520 C2 injection moulding machine Machine Specifications General information Year of manufacture: 2004 Controls: MC4 Weight: 6000kg Dimensions (L × W × H): 4.5 × 1.5 × 2.2 m Clamping force: 125 t Tool Clamping System: 125 / ... Tool plate dimensions: 745 × 770 mm Ground clearance between columns: 470 × 470 mm Tool height: 300 mm Opening Distance: 600mm Maximum Plate Distance: 900mm Ejector force: 22 kN Ejector stroke: 150 mm Injection Unit: ... / 520 Screw diameter: 45 mm Injection volume: 275cc Injection weight: 250 g Specific Injection Pressure: 1878 bar  ...

A Cyklop strapping machine is being sold. Machine can and should be inspected and tried out on site, as warranty or guarantee is excluded. Price is net Loading facilities available All information without guarantee

Key data: 2000 kN

Clamping unit very well preserved, see pictures, also fits 570A as a spare part

Year: 2009 - technically efficient, ready to work – after full service - discs: 500 mm - working length: 3700 mm - PC control (Windows XP) - online access - vertical and horizontal pneumatic clamps - automatic disc guards - roller feeder - support for longer profiles

3 x Injection moulding machines Stork 440 to 1 x Injection moulding machine Stork 660 to 2 x Injection moulding machine Stork 900 to

Key data: 3000 kN, 679 g/PS, 60 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM300-1900C2 Year of Make: 2005 Clamping force: 300 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Max. displacement: 754 cm³ Moulded part weight: 679 g/hp Control: MC5 Equipment: 2 pcs core train Interface Robot Cavity pressure measurement 24-fold hot zone channel control Interface temperature control unit Approx. 76,000 operating hours

Key data: 3000 kN

1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM300-1900CX Year of Make: 2011 Clamping force: 300 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Maximum displacement: 769 cm³ Moulded part weight: 692 g/hp Control: MC6 Equipment: 3 pcs. core train Interface Robot 45-fold hot zone channel control Interface temperature control unit Approx. 51,000 operating hours

Key data: 5000 kN, 2 g/PS, 90 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM300-1900CX Year of Make: 2011 Clamping force: 300 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Maximum displacement: 769 cm³ Moulded part weight: 692 g/hp Control: MC6 Equipment: 3 pcs. core train Djbr Rvoxyrc Isf Nysul Interface Robot 45-fold hot zone channel control Interface temperature control unit Approx. 51,000 operating hours

Key data: 2500 kN, 579 g/PS, 60 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET250-840 Concept Year of Make: 2004 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Max. displacement: 636 cm³ Moulded part weight: 579 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W633-931 2 pcs core train

Key data: 600 kN, 94 g/PS, 30 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET60-200 Concept Year of Make: 2003 Clamping force: 60 tons Spar spacing 420 x 420 mm Screws DN: 30 mm Max. displacement: 106 cm³ Moulded part weight: 94 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W621-1381 2 pcs core train

technically efficient, ready to work - after full service bar spacing: 100 mm dimensions: 265 x 265 cm height: 150 cm weight: 350 kg

Key data: 4200 kN, 2 g/PS, 80 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM420-4300CX Year of Make: 2012 Clamping force: 420 tons Spar spacing 800 x 800 mm Screws DN: 80 mm Max. displacement: 1,810 cm³ Moulded part weight: 1,647 g/hp Control: MC6 Equipment: 2 pcs core train Interface Robot 12-way hot zone channel control Interface temperature control unit

Key data: 2500 kN, 476 g/PS, 55 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM250-1000CX Year of Make: 2017 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 55 mm Max. displacement: 523 cm³ Moulded part weight: 476 g/hp Control: MC6 Equipment: 2 pcs core train Interface Robot 12-way hot zone channel control Interface temperature control unit

Year: 2018 technically efficient, ready to work – after full service hydropneumatic head feed with automatic profile height measurement automatic zeroing after the end of the work cycle double vertical and horizontal pneumatic clamps minimum internal pack dimension: 450 mm maximum internal pack dimension: 2740 mm

Injection Molding Machine FCS SD 6000 BJ 2016

Key data: 2000 kN, 291 g/PS, 45 mm

1.0 St. gebr. Rotary Table Injection Molding Machine Manufacturer: ARBURG Type: 1500T2000-800 Year of Make: 2012 Clamping force: 200 tons Rotary table; 2 x 180° Screws DN: 45 mm Max. displacement: 313 cm³ Moulded part weight: 291 g/hp Control: SELGOCIA Equipment: 1 x Core Pulls

4 pieces available,, Useful length: approx. 4,900 mm,, Usable width: approx. 1,115 mm,, frame: stainless steel,, with Stöber gear motor type K21R 90 S4, 1.1 kW., usable length: approx. 4,900 mm,, usable width: approx. 1,115 mm,, Frame: Stainless steel,, Useful length: approx. 4,900 mm,

Key data: 3300 kN, 62 mm

Stork S+3300-2150 Year of Make: 2008 Clamping force: 330 tons Screw diameter: 62 mm Max. opening distance: 620 mm Injection pressure: 2100 bar Material: PP

Injection moulding machine Battenfeld Machine Type TM 2700/2800 Control Type B2 Year of construction 2003/04 Screw diameter 75 mm