128,877 used machines on RESALE, but how to find them? Machine Search
Year: 2008 - technically efficient, ready to work – after full service - chiseling up + down - PLC control - feeding table
Clamping force: 1250 kN Ø worm: 35 mm Column spacing: 470 mm Injection weight: 142g Min. mould height: 300 mm Total weight: approx. 6,000kg
Key data: 785 kN, 208 g/PS, 40 mm
Nozzle radius: Radius 15, Spring-operated closure nozzle M 60 , Radius = 15 , Bore 3 mm Item no. 12026066 Nozzle SVN 15/3 Fuchslocher Centering ring: 125 mm Mechanical engineering method: 1 K machine, fully hydraulic Maximum clamping plate spacing: 700 mm Minimum tool installation height: 250 mm Maximum injection pressure unit 1: 2025 bar Air Valves: 1 Clamping Plates / Lights Column Spacing: 540 x 540 / 400 x 400 Ejector stroke: 150 mm Screw length unit: 20 L/D (diameter 40mm)
1.600 litre, Stock number: T3890, Tank, plastic,, open top, standing in a leg stand., Conical bottom,, inner overflow/drain., Frame agitator from top,, Ø 1330 mm., Litre: 1.600, Material: Plastic
2.200 litre, Stock number: T3891, Tank, plastic,, open top with strengthening ring., Bridge on the top,, 2 x 1/2 lids on the top., Standing on a plain bottom,, 2 x turbulence plates., Ø 1500 mm., Litre: 2.200, Material: Plastic
290 litre, Stock number: T3703, Hopper, plastic,, open top with lid, standing in stainless leg frame., Conical bottom,, sliding draught in the bottom., Ø 760 mm., Litre: 290, Material: Plastic
3.000 litre, Stock number: T3599, Tank, plastic,, closed top, standing., Agitator from bridge in the top., Ø 1400 mm., Litre: 3.000, Material: Plastic
3.000 litre, Stock number: T3598, Tank, plastic,, closed, top, standing on leg frame., Agitator from bridge in the top., Ø 1400 mm., Litre: 3.000, Material: Plastic
2.750 litre, Stock number: T3265, Tank, plastic,, open top with lid., Standing on flat bottom,, strengthening ring in the top., Ø 1510 mm., Litre: 2.750, Material: Plastic
2.000 litre, Stock number: T2957, Tank, plastic,, closed top, standing on flat bottom., Dished top,, Ø 1280 mm., Litre: 2.000, Material: Plastic
175 litre, Stock number: T2244, Hopper, plastic,, open top with lid., Standing in stainless leg rack., Conical bottom., 1 pc. loose lifting yoke., Throttle valve in the bottom., Ø 750 mm., Litre: 175, Material: Plastic
1.700 litre, Stock number: T2015, Tank, plastic,, closed, hanging in mountings., Concial bottom., Agitator from the top., Tank cover in the top., Ø 1250 mm., Litre: 1.700, Material: Plastic
QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done through a draining auger from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed (and throughput rate) can be adjustable to change throughput rate 500 to 1.000 kg/h, by adding an inverter, Low water consumption (depending on contamination), The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- round-type) (available separately), This machine is to be electrically connected to an ...
CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 9.500 mm including transmission group, max diam. 2400 mm.(standard transport) - 2 x LKW for the whole system, constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, loading hopper with conveying screw, bottom discharging on the other mixer, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, electric level indicator, paddle type, electric motor 22 kw, complete with cont ...
QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed is adjustable to change throughput rate 500 to 1.000 kg/h, throughput rate can be adjusted according to contamination and material, Low water consumption (depending on contamination) About 60 lt., The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- for-water-powder-granule) (available separately) to be reused in the proces ...
AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 80 Tons ca. pressing force, 45 kw drive, complete with oil heating and cooling systems, proportional pressure flow controller, Bale size LxWxH 1.100x720 mm (adjustable length), feeding hopper size : 1.100 x 1.600 mm., Average throughput rate, - with 30 kg/m3 materials 5-7 Ton/h, - with 50 kg/m3 materials 9-11 Ton/h, - with 120 kg/m3 materials 17-19 Ton/h, 5 vertical-wire binding, Cycle with no material, no twisting : 25 ca, Pre-press flap with 2 x 20 Ton force, Exchangeable bottom plate in hardox in channel and chamber, oil tank capacity 950 lt., Machine weight ca.25.000 kg., General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic binding, Fully automatic with adjustable parameters on touch screen ...
Key data: 4000 kN, 80 mm
Machine + Viper Robot 12
AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 100 Tons ca. pressing force, 45 kw drive, complete with oil heating and cooling systems, proportional pressure flow controller, adjustable channel pressure, Bale size LxWxH 1.100x720 mm (adjustable length), Filling hopper size 1.100 x 1.600 mm., Average throughput rate, - with 30 kg/m3 materials 6-8 Ton/h, - with 50 kg/m3 materials 10-12 Ton/h, - with 120 kg/m3 materials 18-20 Ton/h, 5 vertical-wire binding, upper and lower photocells to control material feeding feeding, Cycle with no material, no twisting : 22 ca, Pre-press flap with 2 x 20 Ton force, Exchangeable bottom plate in hardox in channel and chamber, Baler weight ca.27.000 kg., General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic bind ...
AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 120 Tons ca. pressing force, 90 kw drive, complete with oil heating and cooling, proportional pressure flow controller, Filling hopper 1.100 x 1.600 mm., Bale size LxWxH 1.100x720 mm (adjustable length), Average throughput rate, - with 30 kg/m3 materials 6-8 Ton/h, - with 50 kg/m3 materials 11-13 Ton/h, - with 120 kg/m3 materials 19-22 Ton/h, 5 vertical-wire binding, Cycle with no material, no twisting : 21 ca, Pre-press flap with 2 x 26 Ton force, Exchangeable bottom plate in hardox in channel and chamber, Machine weight ca 28.500 kg, oil tank capacity : 1.500 kg, General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic binding, Fully automatic with adjustable parameters on touch screen panel., A M ...
R1317 Injection moulding machine ARBURG A 221 - 250 - 55 Year of manufacture 1997 Control Multronica with handling device without hopper and water distributor converted to CF drive but without card, with operating instructions for Arburg and one for the robot Machine was freed up by the purchase of new machines. but no function check from us Price free loaded on truck € 1950.-- +VAT a viewing is desirable Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any guarantee for compliance with all requirements mentioned in the UVV (accident prevention regulations).
Price 4.900+VAT (claimable)free loading on truck Injection molding machine Locking force 200t Distance between the spars 520 x 520mm Screws D.=50mm = Injection weight in hp 297gr. Machine very well preserved comes from medical equipment manufacturer Dissolution of injection molding department .with operating instructions and 2 discs. Viewing by e-mail appointment is desirable Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations)
The scope of delivery includes: 01x Open fronted storage boxes, used Manufacturer: Bito External dimensions: 600 x 400 x 170 mm Interior dimensions: 560 x 360 x 167 mm Opening dimensions: open on one side at the front, 275 x 82 mm (WxH) Handle: yes, single-sided, open Colour: blue Weight | Piece: 1.59 kg General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Special price because without dukumentation / without disc without funnel +VAT (reclaimable) R1277 Injection moulding machine Arburg A 270 Hydronica D-Version Dialogica topZustand screw D 30mm with device for injection into the parting plane a viewing is desirable by appointment Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations).
A welding machine Pfaff including a rotary shear Kuris and an unwinding device MK is available. 1) Welding machine Pfaff 8309. 2) Rotary shear Kuris BOM 101. 3) Unwinding device MK Sewing Technology Systems. Documentation available. An on-site inspection is possible. The system is dismantled and ready for loading.
Key data: 850 kN, 40 mm
R1295Injection moulding machine ARBURG 320-850-210 Multronica Screw D=40mm Locking force 85 t.Converted from floppy disk drive to CL drive Viewing by e-mail appointment is desirable Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations)
Pellet cooler: - Vacuum cleaner: 5.5 kw (7.5 hp) - Electrical panel. -Pipes
Injection moulding machine Engel e-motion 2440/380 T BJ 2008
2 x Husky HL500RS80 2016 injection moulding machines
Year: 2006 technically efficient, ready to work – after full service 3-spindle (high-speed motors) possibility of setting for various profiles (frame / sash) pneumatic profile clamping
Injection moulding machine Krauss Maffei KM 50/90 C2 BJ 2001
2 x Injection Molding Machines Manufacturer. Arburg Type : 270S-250-60 BJ 1996
Netstal Elion 800 injection moulding machine with Wittmann Handling Primus The machine is fully functional and has only 6500 operating hours
Injection moulding machine Arburg 470C 2000-675 BJ 2007
Injection moulding machine Krauss Maffei KM 300-1900 C2 BJ 2000
Injection moulding machine Arburg 420S 1300-350 BJ 2000 without handling
Injector for Plastics. - 30 mm spindle - Laboratory sample mold - Engine: 10 hp (7.5 kw). - Electrical panel
Year: 2007 - technically efficient, ready to work – after full service - SV 530 cleaning machine - AKS 1610 welding machine - TBA-F 26/25 cooling station - WT 530 turning station - Welding dimensions: 2300 x 3500 mm - Flash limit: 0.2 – 2 mm - Seal formers
Injection moulding machine Demag erg. 250/560 840 BJ 2001
Injection Molding Nose Demag ergotech 50/370-200 BJ 2000
Injection moulding machine Engel victory 200H/200V790 comb BJ 2018
injection molding machine Angel Type: Victory 330/80 Tech Machine No: 155871 Age : 2005
Ideal for operating a business where power outages are not desired, for example injection molding R1334 Power Generator Emergency Power Generator POLYMA/DEUTZ 80 KVA installed in a truck trailer single-axle, was used on construction sites. Dirty outside by leaves and dirt Polyma Kassel 80KVA = 16A = 64 KW,Diesel engine Deutz type F6L912 7ßKW 95hp 2000 rpm., With diesel hand pump hose in canister and pump,With cable/plug 63 A, The trailer is not soundproofed, stood outdoors for years under canopy and is accordingly polluted More detailed pictures on request
Injection moulding machine Krauss Maffei KM 200-1400 C2 BJ 2000
Key data: 20000 kN
Angebot/Offer: Engel Duo 17060/2000 Viper Robot 60 approx. 4900h YOC 2021
URBAN AMS 6010 very good condition fully operational
Key data: 6500 kN, 105 mm
Location is : Latino America !
Key data: 1500 kN, 415 g/PS, 55 mm
Built in 1999 Clamping force: 150 tons. Screw diameter: 55 mm Displacement: 456 cm³ Spray pressure: 1564 bar Very good condition!
Year: 2006 - technically efficient, ready to work – after full service - possibility of mounting 3 milling heads - top and bottom chiseling - control via PLC - automatic machining process
maximum number of results exceeded
please refine your search
