recycling plastic used for sale

PET BLOW MOLDING - MAG PLASTIC - Blow molding solution for PET bottles Year: 1994 Type: SSB 40 Input voltage: balanced three-phase 400 V Frequency: 50 or 60 Hz +- 5% Total installed power: 86 kW (Option 102 kW) Weight: Approx. 5,000 kg Number of molds: 4 Clamping force: 250 KN Total opening stroke: 120 mm

SCREW : 100MM MOTOR : 45 KW REDUCER : ZLY250 SPEED : 250 250KGS/HOUR REMARKS : 1)WOODEN CASE PACKAGE 2)NOT INCLUDE INSTALLATION COST 3)SINGLE SCREW EXTRUDER (1 PCS) 4)MOULD (1 PCS) 5)COOLING FLUME (1 PCS) 6)DRY MACHINE (1 UNI) 7)ELECTRICAL CHANGE NET SYSTEM (1 UNI) 8)PELLETIZER (1 UNI) 9) high temperature wire (FOC 30 m) Pelletizing Auto Pusher + Conveyor #1

PLASTICSERT 100 PLASTICSERT 100 MAILBAG is an automatic vertical bagging machine ideal for magazines, reports, catalogues and publications. Year 2008. The bag sealer machine works with a film reel mounted on a motorised roller. An adaptor folds the film and forms a closed bag containing the products. At the end of the process the product is automatically ejected. -Digital control panel -Booklet length self-adjustment with photocell -Independent hot wire sealing bars -Cutting temperature electronic control -Built-in piece counter -Automatic drive of the product that needs to be packaged -Wide support surface Product width: from 160 to 250 mms. Lenght: from 100 to 360 mms. Thickness up to 15 mms. Speed: 20 pieces/min.

DL-2400 THREE LAYER CASTING MACHINE SINGLE EXTRUDER CASTING MACHINE

Tray sealer that closes pre-formed trays with film, The Meca Plastic S3000 is a tray sealer: you place pre-formed trays with product in the tooling, the machine brings them under the sealing head and seals a top film onto them. The machine has a touchscreen with Dutch menus where the sealing temperature, pressure and speed are set per programme., The tooling fitted takes two trays per cycle; tooling is matched to the tray size, so a different tray needs different tooling. The machine was built by Meca Plastic in Pouzauges, France. The type plate is there, but the filled-in fields are no longer legible, so year and serial number are not known., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/meca-plastic-s3000-tray-sealer/, Type: Tray sealer, Controls: Touchscreen with programmes, Dutch me ...

Box Width:750 Box Height:1000 dimensions of the machine ca.:1200 m2 Powder Coating Line EISEMANN very less used and in very good condition. New Price of the plant 2.600.000,- EURO Power & Free conveyor system with 250 car trains, 5-Zone Spray Pre-Treatment System, stainless steel - water drying cooling zones. 2 nos.of WAGNER stainless steel powder cabins each with ABB robots & double-automatic powder guns, as well aseach cabin is equipped with a hand-powder device. Powder Curing Oven, direct gas heated three-zone Spray cleaning equipment, Stainless Steel - Sewage Treatment Plant, Evaporator with Reverse Osmosis System & Fresh-Air Device. Opening Cross Section Areal: Width 750 mm, Height 1000 mm Technical Details: Pretreatment conveying speed 2.3 m / min. Pretreatment surface area approx. 200 m2 / h. Painting Surface approx. 120 m2 / h. Throughput of workpieces approx. 4,000 k This Powede ...

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Chip press for the recycling and compaction of plastic chips (which are shredded if necessary) from machining by converting them into cylindrical briquettes. When it comes to disposing of PU or EPS chips, the Styrotec briquetting press saves a lot of money and increases profits by turning waste into a resource. The chip press can be installed both indoors and outdoors. Briquette diameter: 55 mm Hopper dimensions (diameter): 1000 mm Throughput: 30-75 kg/h Motor pump power: 5.5 kW Dimensions of the briquetting press: 1,100 x 1,460 x 1,600 mm Weight: 565 kg

Complete Britas filter with many spare parts. Off site, available immediately.

GAMMAMECCANICA Compac 125 mm. Construction year 1998 Including Loading conveyor belt, Metal detector, Compactor with driven haul off for reels, master dosing unit Engin Plast, Extruder 125 mm diam. 36 L/D with degassing pump d.c. Ansaldo drive 197 kW, Total installed power 501 kW motor, BD plast non-stop screenchanger diam. 200 mm, hydraulic power station, water ring pelletizer M 8500, Electrical cabinet, Type of machine: GAMMAMECCANICA PLASTIC RECYCLING LINE 125 mm.

used screening machine, function-tested, immediately available

ZENO shredder type ZTLL 3000 x 2500 For crushing PVC window frames Capacity approx. 10 t/h with screen perforation 50 mm Ø Inlet cross-section: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor flight circle: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) positive inserts, 80 x 80 x 45 mm on tool holders Rotor Bearing: Pillow Block Bearing Rotor body: hardfaced (wear protection) Water spraying funnel: flat jet nozzles, à 3 l/min at 3 bar Screen design: solid screen basket, reinforced with ribs, with screen quick-change device Counter blade: with cutting gap adjustment and foldable Side walls in the rotor area: replaceable, Hardox material Hopper: 1300 mm high, flared on 4 sides, double-walled with concrete filling, without lid Machine weight: approx. 43,000 kg Control cabinet (loose, for controlling the machine, incl. soft sta ...

COLLIN Teach-Line CSG 171 T Strand Granulator For sale is a used COLLIN Teach-Line CSG 171 T strand granulator. The compact tabletop machine is used to produce granules from round plastic or polymer strands. The previously extruded and cooled strands are fed via a pair of feed rollers and then granulated by a fixed counter knife and a rotating impact knife. The feeding and cutting process can be easily observed through the transparent protective cover. The cutting gap between the rotor blade and the counter blade is precisely adjustable. The desired speed can be regulated on the control panel. Technical data: Manufacturer: Dr. Collin GmbH Model: Teach-Line CSG 171 T Year of Make: 2009 Machine number: 9310 31 09 Connected load: 0.5 kW Electrical connection: 230 V / 50 Hz Nominal current according to nameplate: 6 A Dimensions: approx. 290 x 500 x 540 mm Weight: approx. ...

The BTS-Glass Bottle Crusher is ideal for crushing empty glass bottles and glasses in catering business and other bottling companies. It is also used in factories with glass waste issues. You can crush up to 100 glass beer bottles per minute. The glass bottle crusher impresses with its ease of use, safe operation and the spacious filling chamber. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 80%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Machine size: 1850 H x 965 W x 832 D mm Machine weight: 315 kg Transport height: 1850 mm Volume reduction: up to 80 % Loading aperture: 481 W x 337 H mm Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) User-friendly, safe and easy to operate Reduces the frequency of daily/weekly glass waste collections Suita ...

Grease separator sether boiler, Type: Easy Clean Standard NS 4B completely cleaned and rinsed, grease-free and odourless. leakage test. A spout pump is included in the scope of delivery. New price was 8000,00â?¬ net. Deutschaland-wide shipping in German-speaking countries possible at an additional cost. Delivery: - Boiler grease separator Easy Clean Standard NS 4B - Sampling device DN100/150 horizontal - Spühl pump for grease separators

RMH G 60 New Manufacturer: RMH Roller cutting width: 2000mm Roller cutting height: 1200mm Dimensions ( L x W x H ): 3100 x 1300 x 2500 mm Drive: 11 KW Manual and automatic working procedure Two-handed operating system Cutting force: 2 x 30 cylinders (60 tons cutting force) Total weight: 4200kg

Waste separation plant - unpacking plant Food Waste Disposal plant / separation and separation plant for food & industrial waste. The innovative wet-separation plant for the treatment and separation of mixed, packaged and unpackaged waste. This plant is a solution for the settlement of the TA municipal waste of the Waste Disposal Ordinance, which prohibits the disposal/landfilling of untreated, organic, biodegradable municipal waste since 1 June 2005. By processing and separating organic and/or municipal waste, we reduce the pollution and provide a larger volume of high-quality biomass for recycling. If waste has previously been landed untreated, such waste is processed and recycled. The organic components are returned as compost or biomass for the production of renewable energies, which leads to a significant reduction in landfilling and thus the associated methane emission.  ...

Mini roller cutter Our range now also includes machines for processing residual rolls, for example from paper production, the packaging industry, printing houses, textiles, aluminium rolls, film rolls, etc. These heavy rollers cannot be processed efficiently and safely with the normal cutting systems, but with these special "guillotine" roller cutters this is no longer a problem. The mini roller cutter can be seen here as a standard version. We offer the Mini roller cutter in version G20 / 25 and G30. All data can be customized according to the customer's wishes. (Sensors | Protective grille | Light barriers | colour, etc.) Roll width: max. 700 mm Roller height: max. 800 mm Drive: 5.5 Kw Cutting force: 25 T cylinders Weight: 1200 kg Working cycle: 65 seconds Including automatic return: Important roll cutting width and roll cutting height can be adjusted as desired. Dep ...

1 piece of factory-new mobile residual concrete recycling plant RECYCLING PLANT for processing fresh concrete surpluses MREC 15 - MOBILE VERSION Manufacturer: RSM Type: MREC 15 Year of construction: factory new Washout capacity approx. 15 m³/h WAM washout screw Separation cut 0.3 mm - 1.00 pieces filling funnel - 1,00 pieces high basin (25m³) - 1,00 pieces intermediate pool (2m³) - 1.00 pieces of waste water mixer with console - 2.00 pieces of submersible sludge pumps - 1.00 pieces submersible pump - 1.00 pieces of control for residual concrete recycling plant - 1.00 pieces of flushing gallows - etc. The final painting is carried out according to customer requirements. Price on request Delivery time: immediately available Offer and prices are purely net from location Intermediate sale reserved, errors and/or misrepresentation reserved,

TECHNICAL SPECIFICATIONS Manufacturer: STETTER (Germany) Designation: Concrete recycling plant Type: RA 20 Year of construction: 1994 Normal concrete washout capacity: 20 cbm/h Required rinsing water volume: max. 15 cbm/h grain size: 63 mm Separating cut: 0.20 mm Drive power washing drum: 2 x 4 kW Rinsing water pump washing drum: 2.36 kW SPECIFIC COMMENT - incl. washout pump - Operational and fully functional - Excl. agitators and dirty water pump

Technical data Maximum pressure: 50 tons Year of Make: 1994 Pressing force: 7.14 kg/cm² Number of bindings: 3 horizontal Channel cross-section: 1000 x 700 mm Dimensions of the tailgate: 145 x 95 cm Bale weight: do 500 kg Weight: approx. 10 tons Power connection: 400 V/ 45 kW Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the bale chamber for easy maintenance

1 used residual concrete recycling plant BIBKO ConTec, year of construction 1992, without control, spare parts available, rep. needy, sale ex location Upper Franconia

1 used BIBKO RAM 16, built in 1996. without control and in need of rep., from stock, immediately available, free loading

We sell a used system of recycling machines with the following components (built in 2004): - Chip crusher type RS 300 E with coarse part outlet (Steimel) - Scraper belt conveyor with torque cut-off (DGS) - Chip centrifuge AZ - 250 (ARP) - Vacuum valve VSS 100 (ARP) - Pump sump (ARP) - Vibrating sieve -Switchboard The facility is fully functional and can be picked up.

Technical data: Maximum pressure: 35 tons Year of Make: 1994 Press force: 5 kg/cm² Number of bindings: 4 horizontal Channel cross-section: 1000 x 700 mm Dimensions of the tailgate: 1000 x 650 mm Bale weight: 450 kg Weight: approx. 8 tons Power connection: 400 V/ 22 kW Bale tying: automatic Press capacity max 120 m³ / hour Theoretical throughput to density 30 kg/m3: approx. 3.6 tons/hour Theoretical throughput to density 60 kg/m3: approx. 7.2 tons/hour Theoretical throughput to density 100 kg/m3: approx. 12 tons/hour Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers 2 sets of light cab ...

TBL SREC 12 - residual concrete recycling plant - COMPLETE - with STETTER RA 12 Washing drum factory new 0.0 operating hours with guarantee including control unit including feeding table Includes 3 submersible pumps (1 piece submersible pump, for truck mixer washing pipe 2.2 kW, 1 submersible pump for returning the recycling water to the washing drum 2.2 kW, 1 submersible pump for draining the recycling water to the water dosing hopper of the concrete mixing plant 3 kW) Washing capacity for normal concrete 12 m3/h Washing capacity for normal mortar 5 m3/h max. particle size 63 mm Separation cut 0.2mm Rinse water volume (adjustable) 7-12 m3/h Rinse water connection for washing drum DN 50 Drain pipe DN 200 Water content of the drum (fill level) 2 m3 Washing drum follow-up time (adjustable) 20 min If required, including delivery, assembly and commissioning Pri ...

HDPE Film Washer Year of construction 2016 0 operating hours (never went into operation) Manufacturer: NEUE HERBOLD, D-74889 Sinsheim composed of: Wet granulator type SM 450/600-S5-2 Friction washer / friction separator type FW 560/3000 Transport screw Separation tank (float-sink separation) type TB 500 mechanical dryer type TM 1005 Extraction system type MFT 55/500 Fine Material Separator Type HS 500 E-circuit

Complete plastics recycling plant in operation. PRICE MACHINE WITH 2 PISTON FILTERS: 520.000€ PRICE MACHINE WITH 1 PISTON FILTER AND A 1 BRITAS FILTER MODEL ABMF 1050-12: 660.000€ 8,500 HOURS OF WORK. IN PERFECT CONDITION. PRODUCTION /HOUR: 900/1,000 KGS. MATERIAL: LDPE, QUALITIES 98/2 AND 99/1 AFTER 1 WASH.

UNOTECH package press from 2018 with approx. 13 - 14,000 Bh. and a sufficient package of wearing parts. the baling press is designed for baling of metal cans and metal blanks Find more here - .ucymachines/

Husmann HL I 1222 ES single-shaft crusher: Working speed max. 35 rpm, 28 knives Knife width 100 mm. Outer diameter of shaft 660 mm, shaft length 2,260 mm Cutter opening 1,200 x 2,200 mm Electro-hydraulic drive with 400 bar system pressure Drive power 200 kW Torque 90,000 Nm to 110,000 Nm Throughput capacity 40 t/h Hopper made of highly wear-resistant steel Discharge conveyor belt with magnetic separator and cleaning brush + Günther starscreen: MULTISTAR 2-SE Screen deck: L: 4,000 mm; W: 1,200 mm; centre distance 266.5 mm. sieve section 60...90 mm Drive 2 x 4 kW Throughput capacity 15 t/h Total plant run only 10 operating hours! Year of manufacture 2020 Find more here - .ucymachines/

Machine Details: - Type: REH 500 eco - Year of Manufacture: 2017 - Quantity: 4 units - Power Output: 500 kW - Fuel: Fermentation residues (Gärreste) - Maximum Operating Pressure: 2.5 bar - Maximum Operating Temperature: 105°C - Water Capacity: 3200 liters - Electrical Connection: 400V, 63A - Application: Combustion of fermentation residues; other fuels may be possible - Accessories: Chimney, ash discharge, dust silo, and filter Brief Description: Rotary kilns designed for the combustion of dried fermentation residues. Find more here - .ucymachines/ Contact us at - sales@ucymachines

For sale: Paper recycling and sorting machine with integrated reversible conveyor belt system 1) Paper Processing Machine Manufacturer: Hartner Year of Manufacture: 2013 Operating Hours: 3500 2) Reversible Conveyor Belt Manufacturer: Hillebrand Model: 4 GB 1400 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Wackerbauer Model: TM 75 Year of Manufacture: 2013 Type of Machine : separation mill Food waste (out-of-date and/or packaged food, manufacturing waste) from the food industry, organic waste, etc., is conveyed into the separation mill via a conveyor system. There, the material is unpacked, separated from impurities, and ground into a virtually impurity-free substrate with a two-dimensional grain size of max. 12 mm. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: EREMA Model: 1514T Application: Designed for Post-Industrial processing (no filters or gas extractor). Usage: Very few operating hours, previously used with BOPP edges. Technical details: - Unique 140mm spindle - Nominal capacity: 1,200 kg/h Included equipment: - Wet cutting head unit - Aggregator - Conveyors - Extruders - PREVIERO mill -Model: Q4 GR -Year of Manufacture: 2013 - Metallic structure (compatible with mill if installation height allows) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Mogensen Model: AF091 Year of Manufacture: 2003 Type of Machine : Optical Flake sorter Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: BJORN EVAPORATOR Model: ELT 200 Year of Manufacture: 2004 The evaporator was installed and commissioned and dismantled in October 2022 (Stored , not operational) Electrical Specifications: - Voltage: 3 × 400 V + 0 + Earth - Frequency: 50 Hz - Maximum Fuse: 3 × 150 Amp Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Lundberg ‎ Model: WasteTech 200 Year of Manufacture: 2022 WasteTech 200 All-in-one Units are designed to capture, convey, cut and collect edge trim waste from up to 8 process machines. Configuration of Granulator(s) is customised to the material and number of process machines and disposal can be in a sack, TubeBag, bigbag or compactor. Specifications: - 4 cutting motors - Maximum air capacity: 3,000 m³/hour (1,770 CFM) - Maximum pipe size: Dia. 200 mm (8) transfer - Maximum suction distance: Up to 30 m (100 feet) - Size (LxWxH): 2,535 x 1,300 x 3,290 mm (8’-4” x 4’-3” x 10’-10”) - Weight: 495 kg (1,090 lbs) - Motor ventilator: 7.5 kW (10 HP) - Power: 3 Phase, 230-460V, 50-60 Hz - Sound: 68–72 dB (A) - Colour: RAL5010 Find more here - .ucymachines/ Contact us at - sales@ucymachines

AMB pre-shredding machine type 753 The plant is already completely dismantled, incl. the hydraulic aggregates and would be ready for pick-up The machine was built in 2004 and was used by us for the pre-shredding of household and bulky waste. It then served as a backup from 2010 to 2022. We have already dismantled the machine and hydraulic unit and stored them on site. Before dismantling, we carried out another test run - without any problems. As the plant had already been dismantled, there was no time pressure. As part of the optimization of the system, the manufacturer AMB installed two additional drives for the shafts - as can be seen in the pictures. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Technical data: Power connection: 2 x 1.5kW Electrically inserted into the baler's feed hopper If you have any questions, please call us: +48 696 072 985

An untested vacuum distillation unit/solvent recycling unit Lömi for the recovery of organic solvents is available. Volume: 50l, operating volume: 30l, distillation capacity range: 8l-20l/h, max. operating temperature: 250°C, protection: EX, vacuum pump type: LÖ/V 6, max. vacuum pressure: 80mbar. Machine dimensions X/Y/Z: approx. 1450mm/600mm/1800mm, weight: approx. 300kg. An on-site inspection is possible.

This used PY-D continuous distillation unit converts waste engine oil, pyrolysis fuel oil, and heavy crude oil into non-standard diesel fuel with a high yield of 80–90%. The horizontal-type reactor operates at normal pressure using a hot-air heating method and cycle-water cooling, making it a reliable, low-maintenance solution for industrial waste oil recycling. Emission control is handled by a new DE-sulfurization smoke scrubber system. Full Technical Specifications - Equipment Model: PY-D - Suitable Raw Materials: Waste engine oil, Pyrolysis fuel oil, Crude oil - Structure: Horizontal Type - Daily Capacity: 5 – 6.5 MT - Work Pressure: Normal Pressure - Oil Yield: 80% – 90% - Power Consumption: 18 kW/H - Cooling Method: Cycle water - Condensers: 4 pieces of Vertical condensers - Emission Treatment: DE-sulfurization Smoke Scrubbers - Heating Method: Hot Air - Type of Installation ...

For sale: a complete waste recycling plant, fully equipped with automated sorting,shredding, separation, and material recovery systems. Overall Process Summary 1. Feeding and battery detection (WeSort AI) with pre-shredding and screening 2. Ballistic separation into flat fraction, rolling fraction, and fines 3. Multiple NIR sorting stages (P2000 / PV2000 / P2800) for PVC, EBS, Wood, PP/PS/PE/EPS 4. X-Ray mineral sorting, ISS Eddy Current separation, Zig-Zag air classification, overband magnets, flip-flow screening 5. Post-shredding with Lindner Komet and SRF dosing with secondary shredding 6. Final SRF/EBS discharge with ferrous and reject handling 7. Manual sorting cabin with dust extraction (Schuko filter system) 1. Feeding and Pre-Treatment - Feeding crane - Feed bunker - Intermediate feed conveyor and screen feed conveyor - Screen and screen discharge conveyor - Analysis  ...

Compactor for SALE - good price! Producer - Pottinger Type - MP1900 Year of production - 2004 Power - 5.5 kW Condition - used in working condition (without reconstruction)

Complete, fully integrated wood pelletizing and shredding line, delivered new in May 2023. Originally engineered and supplied as a turnkey solution. The plant processes A1 waste wood and single use pallets into DIN compliant heating pellets, covering the full process from automatic material feed through two stage shredding to pellet pressing, cooling and bagging. Year of manufacture: 2023 Condition: Used, like new Manufacturers: AMIS, SPANEX, Grecon, ECOKRAFT Technical Data - Purpose: processing of A1 single use pallets, ideal input moisture 10 to 12 percent, into heating - pellets with 6 mm die - Tested output: approximately 460 kg per hour total, 230 kg per hour per ECOKRAFT LP22 pellet - press, using 2 percent corn starch as binder, dust content under 3 percent - Total connected load: 275.5 kW - Required supply fuse rating: 500 A at 400V - Footprint: approximately 23 x 18.5 meter ...

Type - HKV Manufacturer - Ludden & Mennekes Year of manufacture - 2013 Stationary operation. Operates from the loading ramp. EXW Vilnius - 5000 EURO

Technical data of the bale opener line for RDF, MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd., Siilinjärvi, Finland Type BO 4000 Year of construction 2015 Number of opened bales 674 pieces Operating time only 3 days, exclusively by running-in the entire system during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 – 1900 mm Max. bale weight 2,000 kg Conveying height of the system 1,400 mm Max. conveyor width of the system 1,200 mm Openable material RDF/MSW Availability of the system 98% Noise level of the bale-opener line 85 dB(A) Total connected load 37 kW Rated current 125 A SIEMENS SIMATIC HMI Touch operating display Control SIEMENS S7 ET200S Dimensions 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Conveyor belt feed to opener 1,500 x 1,200  ...

Hours 910. Please note! This lot is part of a combination lot. Namely lot 21. Auction-ID: A1-51255-2

Hydraulic pump dimensions 1000x700x1450mm, hour position 190 hours. v.v. an additional reducer: Stiebel GmbH, 45,000Nm of 682 kg, bj. 2018. Please note! This lot is part of a combination lot. Namely lot 21. Auction-ID: A1-51255-1

Technical data/execution Year of construction: 2018 Hour: 7157 Serial Number: W09368333J2D38005 MTU 6R1300, 390 kW at 1700 rpm Euro IV emission standard Additional hydraulic connection 30l/min and 70l/min Roller drive via gearbox 380kW VARIO Load Sensing System Fuel tank 950 litres Rear tire length 8,500 mm and width 1,200 mm, hydraulically foldable Anti magnetic part rear tire Longitudinal strap, length 4.450.mm and width 1,000mm Centralized lubrication points Electrical installation 24 volts Extra electric pump for the following functions in case of engine standstill Rear tire lift/lower/kink Comb opening/closing Optional: magnetic tape lifting/lowering Optional: folding hopper lifting/lowering Automatically revisable fan Reduction system L-C3 complete 3-axle semi-trailer Limiter type L, complete (20 pieces) Nozzle with hopper elevation Overband magnet for supporters Auction-ID: A3-461 ...

Electrically powered machine 11kW rotor, 37kW hydraulics Length 12.25m Height 4.5m Beam 2.26m Transport: 9.75m x 2.3m x 3.36m Weight 9050kg Entry width 48.3 x 134.6cm Tyres 235-75R-17,5H 55.88 cm x 128.27 cm hammer mill system with an 11.43 cm diameter shaft and eight 3.18 cm hammer attachment rods; Hammer grinding kit, complete with (22) balanced, forged, heavy-duty 3.18 cm and 5.08 cm wide, double-sided, replaceable inserts Auction-ID: A3-46111-2825