129,240 used machines on RESALE, but how to find them? Machine Search
Key data: 8000 kN, 3743 g/PS, 105 mm
Year of Make: 1999 Clamping force: 800 tons Screw diameter: 105 mm Injection weight: 3743 gr./hp incl. Removal robot Wittmann Protective enclosure The machine has been regularly serviced and is in good working condition
Small parts magazines metal/plastic 5 pcs. each approx. 30x55 cm, small contents O-rings, flat plugs, cable lugs etc.
Used plasticizing system, diameter 120 mm. Technical parameters: - screw diameter 120 mm - barrel diameter 120 mm L/D 33 mm - 6 heating sections/heaters with a power output of 4300 W - complete set of fans with housings - double degassing section - complete power supply for heaters and fans. The plasticizing system is in good condition, with a capacity of approximately 400 kg/h.
Plastic garbage can SSI SCHAEFER anthracite, round
Year: 2006 - technically efficient, ready to work – after full service - flash limitation: 0.2-2 mm - maximum welding length: 2600 mm - support arms - PLC controller
Plastic garbage cans SSI SCHAEFER 2 pcs. anthracite, ø approx. 40 cm
Plastic waste bin grey ø approx. 53 cm, height approx. 70 cm, 3 pcs.
Key data: 1500 kN, 380 g/PS, 50 mm
Year of manufacture 2005 Clamping force: 150 tons. Screw diameter: 50 mm Operating hours: 117,426 h incl. removal robot: Engel ERC 34/1-E The machine is in good condition, and has been regularly serviced
Plastic flower pot red 5 pcs., each approx. 40x40x75h cm
2 x Battenfeld injection moulding machines type: TM 180/750 BJ 2010
The Plastic welding and plastering line Best. from: 4-head automatic welding machine Rotox GmbH SMH510 Year of Make: 2012 Transfer belt system with buffer tank 2-head plastering station Rotox GmbH Corner plastering machine EKA577 Year of Make: 2015 Control cabinet system Discharge conveyor belt System enclosure with safety device is part of the ONLINE AUCTION of the Operating and office equipment of a window construction company approx. 400 positions best. e.g. from: Hegla Maschinenbau GmbH & Co. KG LPLF Q15F, processing line for plastic profiles for window frames and frames Schirmer Maschinen GmbH, sash/frame assembly line Urban GmbH & Co. Maschinenbau KG, semi-automatic hardware assembly line Urban GmbH & Co. Maschinenbau KG, glass assembly line, glazing bead assembly line Urban GmbH & Co. Maschinenbau KG, manual vertical hardware assembly line, assembly line ...
V.v. wood grain look and wien's prossen Auction-ID: A1-44302-416
V.v. wood grain look and wien's prossen Auction-ID: A1-44302-413
V.v. wood grain look and wien's prossen Auction-ID: A1-44302-414
Color green outside, white inside. V.v. wienersprossen and wood grain Auction-ID: A1-44302-422
Color green outside, white inside. V.v. wienersprossen and wood grain Auction-ID: A1-44302-460
Document tray plastic approx. 80x30x180cm (WxDxH), blue-grey
Garden furniture plastic colour blue grey 1 table approx. 200x100x85cm (WxDxH), plus 4 chairs, faded by sun
File filing system plastic color gray blue 3x24 compartments
Red Plastic pallets, 1M X 1.2M X 150M 4000kg capacity when surface loaded, 1000kg capacity on forks, approx. 130. Auction-ID: A1-45187-115
Red Plastic pallets, 1M X 1.2M X 150M 4000kg capacity when surface loaded, 1000kg capacity on forks, approx. 350. Auction-ID: A1-45187-113
Red Plastic pallets, 1M X 1.2M X 150M 4000kg capacity when surface loaded, 1000kg capacity on forks, approx. 350. Auction-ID: A1-45187-114
135 x UTZ Group red plastic pallets. Surface load 4000kg when stacked on floor, 1000kg when on forks. Standard 1m x 1.2m x 150mm. Auction-ID: A1-45187-91
Transport scooters, platform trolleys, transport trolley wheels, table trolleys, assembly trolleys, complete wheels, tires with rims, stroller wheels, bicycle trailer tires, stroller wheels -Complete wheel: tire for pram/bicycle trailer ... unused -Tyres: Outside O 200 mm -Rim: Inner O 13 mm - Quantity: 72 pieces -Price per piece - Minimum purchase: 4 pieces -Dimension: O 200 x 75 mm -Weight: 0.5kg/pcs
Transport scooters, platform trolleys, transport trolley wheels, table trolleys, assembly trolleys, complete wheels, tires with rims, stroller wheels, bicycle trailer tires, stroller wheels -Tyres: outside Ø 250 mm - Tread: plastic (hollow) -Rim: Inner Ø 13 mm - Quantity: 162 pieces -Price per piece - Minimum purchase: 4 pieces -Dimension: Ø 250 x 75 mm -Weight: 0.8kg/pcs
Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder, socket welding tool set -Manufacturer: Ritmo, socket welding tool set type R 63 TFE -Voltage: 230V -Power: 1400W -Sleeves: Ø 16 - 63 mm, see photo -Dimension box: 450/350/H130 mm -Weight: 8.4 kg
Plastic panels, plastic laminate, veneer panels, decorative panels, laminated panels -Manufacturer: Resopal, HPL plastic panels 37 pallets 6710 kg -different sizes: see photo parts list -Thickness: 1 mm / 1.4 mm -Sale: only complete -Dimensions: 3200/1330/H1800 mm / 3100/1330/H1850 mm / 2190/1330/H1600 mm -Weight: 3150 kg / 1640 kg / 1920 kg
Corner cleaning machine ROTOX Type EPA 472 6605 Year of construction 2010 CNC Corner Cleaning Machine Fully automatic plastering of visible surfaces, outer corners, Sealing grooves/areas, inner corners on PVC window frames and sashes, also with radii, curves and slopes. Automatic profile feeding Integrated reversible arm for turning frame elements Variable tool loading with up to 12 tool positions Tool diameter 170/190 mm Machinable profile width 50 mm – 130 mm Machinable profile height 50 mm – 115 mm Revolutions 5500 rpm. Current consumption 22.8 amps Voltage 400 volts Frequency 50 Hz Compressed air 6-7 bar Weight 1,980 kg Machine dimensions approx. 6000 mm x 4000 mm x H 2000 mm
Key data: 4200 kN, 1090 g/PS, 70 mm
Demag Ergotech 420/800 2300 with embossing function and Robot Wittmann DR 633/CNC 6-316 Prices are at: inventar-verkauf.de/id/alesco Details: Clamping force: 4200 KN Handlebar width: 800 x 710 mm Mold opening: 710 mm Control Ergocontrol NC 4 Connected load: 68KW Total dimensions: 7.9 x 2.2 x 2.5 m Total weight: 21.0 t Accessories/Equipment: Robot Wittmann DR 633/CNC 6 - 316 (XxYxZ) 900 x 1600 x 3000 servo with support and enclosure 2-fold core pull 2 I/O Embossing function retrofitted 2 x Injection Unit: Injection Unit 1 Weft volume: 891 cm Weft weight: 800gr (polystyrene) Screw diameter 60mm Injection pressure 2420 bar Injection Unit 2 Weft volume: 1212 cm Weft weight: 1090gr (polystyrene) Screw diameter 70 mm Injection pressure 1877 bar WITHOUT COOKING VACUUM CLEANER and CLAMPING DEVICE.
LDPE; size 160x230 mm; total approximately 15000 pieces; without pallet; Auction-ID: A1-43992-227
LDPE; size 120x180 mm; a total of approximately 32000 pieces; without pallet; Auction-ID: A1-43992-228
Clamping Force: 160 Ton Maximum opening stroke: 450 mm Mould height: between 250 and 550 mm Distance between plates: 1000 mm Plate dimensions: 795x795 mm Distance between columns approx.: 520 x 520 mm Maximum weight supported: 1110 kg on the moving plate. Extraction stroke: 200 mm MORETTO Receiver-Hopper NOT included. With WEMO manipulator With SESOTEC metal detector Screw diameter: between 25 and 35 mm - not accurately detected Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate dimensions of the machine body: 5700×1600×3500 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-697
Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between columns: 420×420 mm Maximum weight supported: 700 kg Extraction stroke: 100 mm MORETTO receiver-hopper NOT included. WITTMANN granulate dispenser NOT included. SESOTEC metal detector NOT included. Screw diameter: between 25 and 35 mm - not accurately detected. Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate body dimensions: 4800×1900×2600 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-699
Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between columns: 420×420 mm Maximum weight supported: 700 kg Extraction stroke: 100 mm WEMO manipulator NOT included. MORETTO receiver-hopper NOT included. WITTMANN granulate dispenser NOT included. SESOTEC metal detector NOT included. Screw diameter: between 25 and 35 mm - not accurately detected. Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate body dimensions: 4800 × 1900 × 2600 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-4544 ...
approximately 90/100 pieces (approximate numbers), including various 200 Ltr barrels, with and without lid Auction-ID: A1-43992-281
3 pallets, approx., weight 25 kg per bag RRP approx. 80 per bag Auction-ID: A1-45447-45
\"The MOTAN HLX10-2-B01P-0 complete colorator is an industrial equipment designed for the precise dosing and coloring of plastics. This model incorporates a centralized power supply by HLX102B01P0 suction, a WEG motor (UECG reference 3030 TH/581) and the MOTAN COLOR A control system with its cables, guaranteeing precise and reliable control of the coloring process. Offered as is, it is a solution for professionals wishing to integrate or recommission a high-performance industrial colorer. Compact and robust, it has dimensions of 120 cm in length, 50 cm in width and 70 cm in height, for a weight of 50 kg, ensuring stability and ease of installation. The MOTAN HLX10-2-B01P-0 is therefore a reliable and efficient tool for the homogeneous dosing and colouring of plastics in production lines.\" Auction-ID: A1-44765-342
For sale ConTeyor industrial plastic pallet box elements – ECOPACK 1208Lx model, suitable for storage and heavy logistics (industry, recycling, agro, automotive, warehouses). General characteristics (box mounted): Brand: ConTeyor Model: ECOPACK 1208Lx External dimensions: 1200 × 800 × 1050 mm Weight of an empty box: approx. 24 kg Maximum static load: 1050 kg Load capacity on bottom: 350 kg Material: polypropylene (PP) – recyclable Stackable – industrial logistics compatible Detail of available stock: 46 pallet bases 65 contours 450 dividers 66 lids Total weight of the set: approx. 1,800 kg ➡️ Possibility of setting up several complete boxes depending on configuration or sale of the elements separately / in lots. Status: Used equipment in good working condition, traces of normal use related to professional use. Applications: Logistics, industry, heavy storage ...
Double Head Welding Machine Urban Plastic Window Welding Machine Type: AKS 4110 Year of Make: 2/91 Working length max. 3090 mm Connected load 6.5 kW Operating pressure 8 bar Air requirement per weld 15 l Electronic temperature control Welding level 0 – 300°C Electronic temperature control Welding limitation 35 – 65°C - Heated blade welding bead limitation 2 mm - Welding of 2 corner joints at an angle of 90° in one operation. - Fast and accurate insertion of the profile thanks to the automatic welding head feed. - Automatic weld adaptation to different profile cross-sections - Safety clamping systems that automatically adjust to different profile heights. - Guide elements made of hardened, ground shafts with recirculating ball bushings. Machine dimensions: L 4015 mm x W 1100 mm x H 1840 mm Weight: 790 kg
Welding Machine Urban Plastic Window Welding Machine Type: AKS 3610 Year of manufacture: 2/92 Connected load 2.7 kW Mains voltage 220 V, 50/50 Hz Operating pressure 8 bar Air requirement per weld/stroke 15 l at 6 bar Adjustment range angle 30° - 180° Profile height min. 30 – max. 105 mm Profile width at 90° max. 157 mm Compressed air connection NW 8, 7 bar - Heated blade bead limitation 0.2 mm - Angle welding from 30° - 180° with excellent accuracy. - Above-average welding results of the AKS 3610 for acrylic and foil-coated profiles. - Optimization of the welding result through parallel welding processes. - Individual setting of all welding parameters - Quick change of the outer contour allowances with holding magnets. Machine dimensions: L 770 mm x W 880 mm x H 1500 mm Weight: 320 kg
Wing Attachment Table Dimensions approx. L 2700 mm x W 1300 mm with glazing bead saws right and left Handle drilling unit with 3 drills Automatic screwdriver Lock box milling machine Drill bits for corner trestles Good, ready-to-use condition.
5 x piece Industrial Plastic Tape - Electrically Conductive 113655 - XPC 3550 Auction-ID: A7-45483-99
Consisting of PVC pipes and plastic grids, including pallets and about 11 mesh boxes. Auction-ID: A1-45495-237
capacity: 1025L, filled with an unknown liquid Auction-ID: A1-45411-144
Mastermatic System for Plastic Injection Machines Type: Control and regulation system for injection moulding machines Manufacturer: Mastermatic Operating pressure: Between 50 bar and 200 bar Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-57
3 pallets of fresh food boxes + lid plastic, 2 pallets of fresh boxes = 35300 pieces = 150 g cup PP white 74.5 x 130.5 x 28 mm plus lid PP transparent, 135 x 79 x 9.5 mm = 6 carton Auction-ID: A7-45675-23
- Battenfeld TM3500 / 1900 BJ 2002 or 2001 control B4 without robot for sale. - The machine is currently running in production, no defects.
maximum number of results exceeded
please refine your search
7 € 
