recovery used for sale

Engine type: 18V34SG Electrical power output: 5500kWe, 6838kVA Engine speed, direction: 750rpm, CW Generator type: ABB HSG 900XS8, 15kV, 50Hz Engine control system: WECS 3000 Turbocharger: Napier NA 355 Fuel: Natural gas Application mode: Cogeneration power plant Year: 1995 Running hours: 54855 h Running hours since last overhaul (48721rhs, 05.2010) 6131 h Next major overhaul: 64000 h Original installation: Denmark Genset condition: Excellent Stopped: 08.2022 Service history and documentation: Available Location: Denmark (will be in Hungary 2024 Q2) Scope of supply: Genset Heat recovery Gasramp Silencer lube oil tank Starting air compressor and vessel

Complete CHP power plant, overhaul is done at 64.000 running hours. - Generator set - Soundproof housing - Heat recovery - Exhaust system - Exhaust cleaning (COditheen) - Silincer - Oil tanks - Control system (Diane xt) - Pumps and pipes In perfect running condition. GAS POWER HOLLAND infogaspowerholland

General SKU418U1309 LocationBarneveld MakeGenser TypePowervap-20-EX No.180100 Year of construction02-2017 Main Features Volume20 Ltr. Specified Features - Rotary evaporator MaterialGlass Information With switchgearcheck CEcheck Mounted on framecheck Mounted on wheelscheck ATEX compatiblecheck Extra SpecificationsPOWERVAP is a patented, fully automated pendulum system rotary evaporator with distinguished vacuum stability and distillation rate. - Automatic filling and draining of the rotating flask (patented) - Automatic emptying of the distillate vessel (patented) - Achievement of the desired product concentration - Precise regulation of the distillation process. Temperature, vacuum, and other process parameters are monitored in order to handle even foaming products reliably. - Computerized reflux and standby option - The rotating flask floats freely in the heating bath  ...

General SKU418U1308 LocationBarneveld MakeGenser TypePowervap-20-EX No.170099 Year of construction02-2017 Main Features Volume20 Ltr. Specified Features - Rotary evaporator MaterialGlass Information Mounted on framecheck Mounted on wheelscheck Total height2 m Weight400 kg CEcheck With switchgearcheck Floorspace2,5x0,9 m ATEX compatiblecheck Extra SpecificationsPOWERVAP is a patented, fully automated pendulum system rotary evaporator with distinguished vacuum stability and distillation rate of factor 5 compare to other rotary evaporators. - Automatic filling and draining of the rotating flask (patented) - Automatic emptying of the distillate vessel (patented) - Achievement of the desired product concentration - Precise regulation of the distillation process. Temperature, vacuum, and other process parameters are monitored in order to handle even foaming products reliab ...

General SKU308T739 LocationBarneveld MakeAllgaier Werke TypeWS-GT-0,75 No.280 Year of construction2004 Main Features MaterialStainless steel Surface0.44 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surfaceapprox 0,44 m2 With fancheck With dust filtercheck Heating unit (steam)check Max. temperature300 °C MaterialStainless steel, Stainless steel 1.4301 (304) Information CEcheck With switchgearcheck (as is) Extra SpecificationsFluidized Bed Spray Granulators from Allgaier can be used to produce solid and dust-free granules from liquid starting materials such as suspensions and solutions. The remaining dust and powders can be further processed into easily soluble instant products. The machine is particularly suitable for processing urea granules, yeast, gelatin granules, and water jars. Functionality:During granulation, the solids-c ...

NAKAMURA WT-150 cnc lathe 1 USED CNC LATHE NAKAMURA WT 150Y - Year: 2004 -Max swing over bed : 190 mm - Standard machining diameter: 309 mm - Max machining length: 550 mm - Diameter bar capacity main spindle : 51 mm - Diameter bar capacity sub spindle: 41 mm - Main spindle power: 15 kW - Sub spindle power: 11 kW - Spindle speed: 6000 rpm -Y Axis on the high turret - 2 Turrets / 12 stations with rotating tools Equipped with: - 1 CN FANUC 18 iT - 1 Polygon option - 1 Parts recovery - 1 Set of collets - 1 Set of fixed and rotating tool holders - 1 Chip Conveyor

General SKU410S986 LocationBarneveld MakeRotamil TypeSolvent recovery No.100071 Year of construction1991 Pressure Working pressure6 Bar Specified Features - Distillation Distillation installationcheck Capacity900 Ltr. (2x 450 Ltr.) Vessel sizesdia. 800x1350 mm Max. temperature200 Degr. C. With condensercheck Condenser sizesdia. 500x100 mm MaterialStainless steel Information Mounted on framecheck Total height2,9 m Weight3000 Kg Floorspace3,4x2,3 mDistillationRotamillColumns > DistillationBrand > Rotamill What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

NOVAMODUL Internal Grinding S300/235p Max internal grinding diameter 300 Max length 235 Max diameter of rotation 400 Retrofitted machine with tex compiuter control automatic grinding and dressing cycles with measurement recovery Faceting fixture 3 spindles x internal Diamond copying in machine plus Diamond and copy machine external

NH3 refrigeration system., Additional title: refrigerant NH3, Brew water flow: 5 m3/h against 20 m, Ice water flow: 15 m3/h against 20 m, Refrigerant capacity: 85 kg NH3, Compressor capacity: 145 m³/h, Power: Q0: 2 x 119 kW, Length: 0,945 m, Width: 0,54 m, Height: 0,765 m, Weight: 510 kg, Features: 2x compressors: 145 m³/h, 26 kW with FC, 37 kW nominal output; NH3 separator mounted on frame, with brewing water condenser and ice water condenser; air condenser on frame 3x 2.95 kW; heat recovery condenser with pump; 2 x ice water pumps (2.2kW, 15m3/h vs. 20m); brewing water pump (1.1kW, 5m3/h vs. 20m); expansion tank, max. permissible operating pressure: high pressure side: 22 bar, low pressure side 16 bar

Machine description: Longitudinal travel X = mm. 10.000 Vertical stroke Y = mm. 2.000 Cross travel Z = mm. 600 Relocation additional for W axis 600 mm. (continuous) Power supply voltage and frequency: 400 V. - 50 Hz. 1) Vertical tool magazine with 600 places HSKA63 - DIN 69893. 2) Device for washing the tool cone operated by high pressure coolant. 3) Tilting head unit - 90 ° A Axis tilting cradle - C Axis positions n. 360,000 4) 4-sided drum with a side of 1100 mm., - Spindle speed: 20,000 rpm. HSK 63A; - Spindle bearings a variable preload; - Equipment for automatic tool balancing control; 5) Ecological-accident prevention protection of the armored type machine for high speed machining; 6) Refrigerating unit for conditioning the spindle cartridge; 7) Spindle with provision for the supply of coolant through the center of the tool; 8) Air-conditioned electrical unit; 9) Scrap ...

Unused TGM model E250 Matic fully automatic stainless steel tube filling and sealing machine for Pharmaceutical, Cosmetic, Chemical and Food Industry products. Output Capacity: Upto 3,700 units/hour Metal Tubes: Diameter 10-42mm, Length 50-240mm Plastic Tubes: Diameter 10-50mm, Length 50-240mm Tube print orientation and sensor to detect tube right way up, minimises waste. Fold and roll crimping system for closing metal; polyethylene/laminate tubes sealed by hot air or hot jaws. Integrated ergonomic tube loading system, swings aside for easy access The machine is presently set up with hot air for plastic tubes and there is a brand new wrapped head supplied for aluminium tubes. Additional options included: Stirrer/scraper; Coding stamp; Product level control; Tube orientation system; Water cooler, Pharmaceutical product/data recovery system for recall of batch history  ...

Used Blow Molding Machine SMI EBS 10 year 2019 Introduction to the Blow Molding machine SMI EBS 10 Initially the industrial bottling sector demands unparalleled precision and operational efficiency Consequently the Used SMI EBS 10 Blow Molding Machine from 2019 perfectly embodies these crucial characteristics This machine ingeniously integrating advanced engineering is specifically designed for the manufacturing of PET containers showcasing its pivotal role in the industry Technological Capacity Produced by SMI the introduction of the EBS 10 ERGON model in 2019 stands as a testament to significant technological advancement Boasting an impressive production capacity of 17 000 BPH bottles per hour this capacity is essential for meeting high volume production demands Additionally it supports various container formats including 0 20 L 0 33 L and 0 6 L thereby significantly enhancing its util ...

Walter WDPP-410 edger The WDPP-410 flashing machine is widely used in many sawmill plants. The design of the machine and the principles of its operation allow for quick recovery of purchase costs and limiting raw material losses to a minimum. Reliable operation and safe operation of the saw translate into a high efficiency rate. – Polish production – DTR, CE min. length of the cut prism 1100 mm max. thickness of the cut prism 120 mm max. input material width 500 mm max. width of the finished board 140 mm min. width of the finished board 70 mm circular saw diameter 425 mm capacity 20 m3 right vertical spindle motor power 5.5 kW left vertical spindle motor power 5.5 kW engine speed (vertical saw drive) 2850 rpm horizontal saw engine power 18 kW engine speed (horizontal saw drive) 2850 rpm feed motor rotational speed 1450 rpm feed speed (smooth regulation) 0/20 m/m ...

The packaging machine in question was purchased and set up by our company to package wallpaper rolls. The 3 machines are currently online, but can be sold individually. The machine is suitable for packaging the most diverse products and a wide range of heat-sealable single-ply films can be used, including polyolefins, polyethylene, polypropylene. Three-sided sealed packages containing one or more products can be produced. The machine is composed as follows: VIMACOR WELDING UNIT: (structure in metal carpentry treated and painted with epoxy powder, sealing cross bar, automatic in-line loading and unloading belt, automatic scrap recovery, double vertical and horizontal photocell, average production of 700 / 1400 pac / hour, machine length 3100 mm, height 1400 mm, width 1400 mm, work surface height 890 mm, machine weight 650 kg, power supply voltage 3 ph + N + T 220/380 V, compressed air 6 A ...

As per the title, I am selling a 2011 Semi-Automatic Shrink Wrap with Tunnel Oven, the machine is an ITALDIBIPACK in good condition and regularly maintained. Selling due to lack of use. MORE INFORMATION Timed welding. Separate electronic control of the temperature of the sealing bars. Product length control via photocells with horizontal or vertical reading. Motorized loading/unloading belts. Motorized waste recovery. Film dragging with chain. Equipped with approachable belts for packaging small products. Car on wheels. Tunnel on request Heat-sealing and possibly heat-shrinking monofolded polyolefin films (GREEN FILM – GOLDEN FILM). Machine built to CE standards DATA SHEET TECHNICAL FEATURES MECPACK STX Supply voltage: 240/380 V 3 Ph + N + T Installed power: 1.5 KW Overall dimensions L x W x H: 1800 x 980 x 1450 mm Worktop height: 780 mm Tunnel mouth size ...

Used Blow Molding Machine SMI SR10HP year 2015 Firstly the SMI SR10HP produced in 2015 emerges as an advanced solution for PET container production This analysis aims to detail its technical specifications and operational features It significantly highlights the machine s efficiency and productive capacity in industrial environments Productive Capacity and Versatility of the Blow Molding Machine SR10HP Importantly the machine achieves a remarkable speed of 17 000 BPH showcasing its high capacity It adeptly processes a variety of container sizes including 0 20 L 0 33 L and 0 6 L thereby offering considerable flexibility in production lines Configuration and Components Moreover it boasts ten cavities for simultaneous preform processing which optimizes production time Integrated systems such as a loader tipper and unscrambler automate preform handling Consequently these systems minimize man ...

Overview The Krones Contiform 3 stretch blow moulder was manufactured in 2015 and installed in a mineral water company in Germany to replace an older contiform. As most other machines of this line are already older, the owner decided to stop production. Due to this, the machine has less than 3900 operating hours and is in excellent condition. With the machine, there are two sets of blow moulds (nine moulds in each set) The documentation and program backup are also available. In addition to the blow moulder, there is the preform kipper, hopper, alimentation and sorting. Tech Specs: Capacity: up to 18,000 bph Number of blowing stations: 8 Max. container volume: 3,0l Operating hours: < 3900 h Integrated power recovery Additional Equipment: Blow moulds for 0,5l; 1,0l  Preform feeding system Technical documentation Air conveyor

Year of construction 2000 Hours of power up h 10205 X axis - Longitudinal travel 10,500 mm Z axis - Vertical travel 2,500 mm Y axis - Transversal travel 1,250 mm Work progress speed mm/min 0 ÷ 4,000 Rapid feed speed mm/min 12,000 Maximum thrust on the X-Y-Z axes daN 2,200 Spindle motor power in S1 kW 30 Spindle motor power in S6 kW 37.5 Spindle speed at constant torque. rpm 0 ÷ 235 Spindle speed at constant power. rpm 235 ÷ 4,000 Maximum spindle torque in S6 Nm 1,500 Supply voltage Vac 400 Power frequency Hz 50 Total installed power kW 75.1 ISO spindle taper ISO 50 Positioning accuracy mm ±0.020 Repeatability accuracy mm ±0.010 Supplied accessories: - X axis bench with X axis telescopic cover - Upright complete with ram - Z axis telescopic cover - Articulated presetting probe support - Pneumostatic support system - Carter - Hydraulic unit - Filtering tan ...

Used Bodini Crate Washer up to 800 Crates per Hour Efficient Crate Handling with Flipper Mechanism of the Crate Washer Bodini up to 800 crates par hour Renowned for efficiency the Bodini crate washer employs a specialized flipper mechanism Consequently crates are properly oriented for washing reducing manual labor Furthermore this feature enhances productivity by minimizing errors in operation Versatile Design for Various Crate Formats of the Crate Washer Bodini up to 800 crates par hour Flexibility is a hallmark of the Bodini crate washer Thanks to its versatile design the washer adapts to various crate heights This adaptability ensures seamless integration into existing bottling lines Consequently businesses can optimize operations effectively Dual Cycle Washing for Optimal Cleanliness To ensure optimal cleanliness the Bodini crate washer utilizes a dual cycle washing system During the ...

Wartsila 3.9 MW/50Hz Gas Generating Set 12V34SG with CHP Auxiliaries This power plant was built by Wartsila in end of year 2010 and it was commissioned in 2011 as a turn-key project with heat recovery system for 10 bar steam production. Fuel used in this plant was normal natural gas fed from a local pipeline. The plant was operated till 2021 having total operating hours 43’767 till shutting down. Complete plant with step up transformer, lube oil system, control panels, and synchronizer panel, USP systems, operating monitors, MCC, start system and air compressors, HRCS for 10 bar steam, exhaust system, 6 kV Vacuum breaker with synchronisation, manuals and drawings. Plant is still installed, and electric power is still connected to all devices. Wartsila Service has made all scheduled services for this engine, last 40’000-hour service just 3000-hour prior operation closing in 2021.  ...

The Tonello G1 420 MW2 is an advanced washing machine specially designed for industry to efficiently wash and treat textiles and clothing. This offers a generous capacity to process a large amount of textiles and clothing in one wash. This washing machine is suitable for a variety of washing and treatment methods, including washing, bleaching, dyeing, enzyme treatments and much more. It can handle a wide range of materials and clothing types. The Tonello is designed to minimise operating costs while ensuring high washing and treatment efficiency. Ice can be achieved through the use of advanced technologies for water recovery, energy conservation, and automated operations. easy handling and quick commissioning. Clear control panel and clear instructions make it easy to operate and maintain the device.

Heat recovery system wit 450ltr enameled tank + double wall heat exchanger for DHW. Good condition. Prepare to connect for Your refrigeration system. 450ltr+108/21x16/10 (1,6) 450ltr+76/10x16/10 (1,4)

Description: KAESER ASK 34 SFC with Inverter Drive and Heat Recovery Option  , rated power: 18.5 kW air flow: 3600 l/m working hours: approx. 15948 hrs., 12845 hrs. under load max. working pressure: ,8 bar regulary maintained equipped with 1 RFID user card! service manual: unavailable  , integrated SFC control cabinet housed in its own integrated yet insulated control cabinet the SFC frequency converter is shielded from heat arising from the compressor a separate fan keeps operating tem peratures in the optimum range, so as to ensure maximum performance and service life SIGMA CONTROL 2 traffic light” LED indicators show operating status at a glance, plain text display, 30 selectable languages, soft-touch keys with icons, fully automatic monitoring and control selection of Dual, Quadro, Vario and Continuous control as standard ethernet interface for connec ...

Used Bottle Washer Bodini 10 rows up to 4500 bph Efficiency of the Bodini 10 Row Used Bottle Washer up to 4500 bph The Bodini 10 row used bottle washer stands as a dependable choice for bottling operations ensuring a performance of up to 4500 bottles per hour Crafted entirely from stainless steel and featuring plastic baskets this machine offers durability and resilience over time Optimal Performance and Advanced Technology With its step by step advancement of baskets and the use of low pressure steam it guarantees effective cleaning Moreover thanks to integrated automation with automatic bottle loading and unloading manual interventions are significantly reduced maintaining a continuous flow of production Furthermore the label extraction belt further simplifies the cleaning process Kept in excellent condition the machine delivers high performance even after prolonged use Additionally it ...

Used Isobaric Filling Machine Cobert Exacta up to 1600 bph Introduction to the Filling Machine Cobert Exacta The Cobert Exacta isobaric filler with its 16 taps and advanced features stands out as a cutting edge solution in the industrial bottling field Technical Specifications Equipped with filling taps featuring pre evacuation and degassing the Cobert Exacta ensures precise and uniform bottle filling Additionally the pneumatic piston system for bottle lifting integrated with an air recovery mechanism guarantees efficient and reliable operation Moreover the presence of a vacuum pump optimizes the filling process maintaining high standards of quality for the final product Furthermore the external tap washing device contributes to the cleanliness and hygiene of the machine essential for safe and compliant production Performance and Functionality Moving on the Cobert Exacta offers variable  ...

Description: - Automatic spraying machine - Serial number 7254 - Total installed power 15.46 KW - 2 transverse working heads with 4 spray guns each - Working width 1300 mm - Maximum workpiece height passage approx. 100 mm - Length of the infeed table 1200 mm - Outfeed table length 470 mm - Feed speed from 1 m/min up to 5 m/min - Suction system with dry filters - System for cleaning and material recovery - Extraction fan with 2.20 KW motor Approx. Onsite Dimension. (l x w x h): 3,400 x 5,000 x 2,900 mm, weight approx.: 4,000 kg

Manufacturer : Nova (SERAC) Model: NS 574/4 Year : 2004 Type : volumetric filling by 2 pistons Number of heads: 4 Volume : 500 to 7400 ml Volume per mm of stroke: 18.14 ml Product: liquid / semi-liquid for flasks, bottles, cans External conveyor control Neck detection Available filling formats Filling heads available Recovery tank Drain hoses installed on photos. Power: 0.45 KW Air consumption: 140 Nm3/H at 6 bars

Manufacturer: Norden Model: NM 250 HA Year: 2003 Type: Hot air plastic tube filler / sealer Max capacity : 25 units / min Transport chain : 14 buckets Empty tube feeding : manual Tube printing centering 20 L hopper HA hot air device Ribbed or smooth sealing 1 side coding: 6 characters Verification check: no tube - no filling Available formats. Cutting recovery: CFM R154V hoover ThermoChill I Recirculating Coolers General information Filling volumes: 1ml - 300ml. Diameter: 10 mm - 50 mm

Description: Internal dimensions approx. ,4200 x 5700 x 2200 mm 3 sides, one side is used by the building Extraction area approx. 3500 x 1800 mm with sprinkler connections, lighting, ,ventilation ducts and heat recovery system without CE certificate and manuals Approx. Onsite Dimension. (l x w x h): 12,000 x 8,000 x 3,500 mm, weight approx.: 6,000 kg

Description: GIARDINA DUALTECH 420 DB DRY Roller Application Machine with synthetic-coated, 2,000 mm wide conveyor belt and a working width of 1,300 mm Material recovery GREEN BELT Infeed roller conveyor with a working width of 1,300 mm, length 1,220 mm  ,  , , , Roller transport, driven rollers with suction device at the bottom.  , , , Workpiece blow-out, rotating blow-out, time-controlled  , , , Outfeed transport- hinged  , , , Lexan cover, hinged at the discharge, cover of the green belt zone  , , , Powered roller transport, PVC coated rollers. __________________________________________________________________ The linear slides are dust-sealed and are maintained via a few central lubrication points. Modern software controls the acceleration as well as the deceleration and is adjustable from 0-120 m/min.  ...

ELECTRICAL SPECIFICATIONS   total power consumption: 57 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4900 mm   space requirements -front/back-: 2600 mm   total height: 2600 mm   total weight approx.: 2600 kg Washing medium: solvent-free basket/rack size     790 x  590 x  600 mm cabin dimensions    1200 x 1200 x 1200 mm useable volume       800 x  780 x  900 mm net weight of batch            ;     200 kg Attachments: Dosing unit DOSANTEC A763-168M buffer tank 100 ltr Waste water tank 75 ltr rotating spraying cross from top rotating spraying cross from bottom Drying device  ...

A complete ventilation system used in food production is available. The system consists of 2 main parts: (1) WK-WD 101 and (2) WK-W 41. Air flow capacity (1)/(2): 8000/1500 m³/h, external pressure (1)/(2): 500 Pa/350 Pa. Fan type (1)/(2): THLZ 400/ER35F-2DN.C5.1R, filter (1)/(2): TK G4 7.3 m² / TK G4 2.5 m². Sound level (1)/(2): 86.5 dB / 71.7 dB. Additional for (1): Heat recovery unit diagonal flow, frost protection thermostat up to 200°C. Additionally for (2): Cooler-evaporator, Danfoss VLT 6003 HVAC, silencer baffle. Documentation available.