recovery used for sale

6,000 l / h product 3 Stage system, with plate heat exchanger and heat recovery Control S7

1 used cylinder head for Kubota V 1505 T. no obvious damage. Sale is for recovery without any warranty. Other parts are available. As well as diesel engines 1-6 cyl., various products: Deutz, Daedong, Farymann, Hatz, Iseki, Isuzu, Komatsu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Capacity of 4,5-100 kw, used partly as new. Gasoline engines: 1-2 cylinder 3-15 kw B & S, Honda, Kohler, Robin, Wisconsin. Various cooler, starter, alternators, and mufflers in stock, various hydraulic pumps and hydraulic motors.

Technical data: -Bending mot. Automatic or manual mode -Bending performance square steel ST 37 up to approx. 25 mm -Bending performance ST 37 steel up to approx. 30 x 8 mm -Bending length betw. the adjustable 1000 mm turning units -Faceplate with various recording profile perforations -Tailstock / recovery storage -Delay start bending / bending length twisting preselection - right - left rotation -Space requirement approx. B 1750 x H 1100 X 500 mm -Drive 400 V / 0,75 kW -Weight approx. 150 kg

Paint booth Wolf-Taifuno: Make : Wolf, Type 4/B, Taifuno Year of manuf.: Cabin 2011, Aggregate 2009 Dimensions : 4.0 m x 7.0 m x 2.9 m (approx. WxLxH), total height 3.7 m Supply air blanket : Filter ceiling Lamps : 2 x 4 pc recessed luminaires with 4 x 58 W each Entrance side : 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door : 0.65 m x 2.8 m (approx. WxH) Rusting : Full surface rusting 5x15 pcs. 790x495 mm, support bar 790x40x3 mm Heating unit : 209 kW Energy saving : Speed control with frequency converter and heat recovery Dry temperature : 80 degrees C Oil burners : Weishaupt brand, alternatively gas burners Exhaust gas fireplace : stainless steel, single-walled, diameter 250 mm length approx. 6 m Supply air unit : 21,200 m3/h; 7.5 kW, 1500 1/min Exhaust air unit : 21,000 m3/h; 7.5 kW, 1,500 1/min Pipelines : Supply and exhaust air pipes, deflecto ...

1 PIMATEX type MTFC020 high temperature yarn dyeing machine vertical type, capacity 20 Kg, year 2004 carrier with 6 swords and each sword carries 4 cones gauge 6" = 24 cones each batch 1 PIMATEX type MTFC030 high temperature yarn dyeing machine vertical type, capacity 30 Kg, year 2001 carrier with 9 swords and each sword carries 4 cones gauge 6" = 36 cones each batch 1 PIMATEX type MTFC050 high temperature yarn dyeing machine vertical type, capacity 50 Kg, year 2001 carrier with 16 swords and each sword carries 4 cones gauge 6" = 64 cones each batch 1 PIMATEX type MTFC100 high temperature yarn dyeing machine vertical type, capacity 100 Kg, year 2001 carrier with 24 swords and each sword carries 6 cones gauge 6" = 144 cones each batch 1 PIMATEX type MTFC160 high temperature yarn dyeing machine vertical type, capacity 160 Kg, year 2001 carrier with 36 swords and each  ...

SCM FRIGO SW1X 750 VSBT/S Brand:SCM FRIGO Type:SW1X 750 VSBT/S Stock number:M22-4539 Cooling capacity:50.0 kW Application:Cooling Number of fans:4 Refrigerant:R449A Refrigerant Content:70.0 kg Voltage:400 Volts Power consumption: 53.2 kW Motor power:85 kW Dimensions:5320 x 2200 x 2310 mm Weight:2,600 kg Year:2015 Number in stock:1 piece(s) Price: On request Description: A young low temperature water/glycol chiller, equipped with Bitzer screw compressor HSN7471/75, heat recovery and a complete control box with the entire control of the chiller. Mentioned capacity is at water/glycol +45/55°C and an inlet/outlet of -27/-32°C. Visit also our website: used-refrigeration

Oil-free. Water cooled. Variable speed drive. Volume flow 4.5 - 15.5 m3/min. at 7.0 bar. With built-in compressed air refrigerant adsorption dryer. HP air end 1x replaced. With energy recovery.

Variable speed drive. Volume flow 1.57 - 6.25 m3/min. With Sigma control. With energy recovery. New mineral oil.

Variable speed drive. Volume flow 2.0 - 14.68 m3/min. Air end 1x replaced. With energy recovery.

Paint shop Memmingen: Paint booth, special size: Make : LUTRO Year of manuf.: 1995 / 2017 - new units and pipelines, LED lighting, etc. Dimensions : 5.6 m x 9.48 m x 4.7 m (approx. WxLxH), total height 5.5 m Supply air blanket : Filter ceiling Lamps : 2x4 pcs LED inclined recessed luminaires + 2x3 LED wall recessed luminaires on the side Entrance side : Roller shutter 5.3 m x 4.2 m (approx. WxH) Exit side : Sliding gate (fire protection gate) is not included in the scope of delivery Escape door: 3 pieces: 0.95 m x 3.0 m; 0.95 x 2.0 m; 0.75 x 2.0 m (approx. WxH) Rusting : without rusting, without substructure, we have ev. Grates in stock Heating unit : approx. 250 kW, gas surface burner Energy saving: Heat recovery Dry temperature: 80 degrees C Supply air unit : approx. 22,000 m3/h Exhaust air unit : approx. 22,000 m3/h Pipelines : supply and exhaust air pipes, deflec ...

• Blow moulding machine SIPA mod. SF 8/4 – 4.000 bph: • Year: 1998 • Producer: SIPA • Speed (BPH): 4.000 bph • 4 cavities. • Format available: 0.5 lt - 1.5 lt - 2.0 lt. • Preform loader. • Preform tipper. • Complete with air recovery system. • Safety protections. • Code W 14

With built-in compressed air refrigerant dryer. Refrigerant R 404a. With energy recovery.

New device Special offer!

GE LM2500+ For Sale (31.3 MW, 50 Hz): GE LM2500+ natural gas-fired and associated Aalborg HRSG. The GE LM2500+ has a nominal output of 30 MW. The OCGT originally produced steam for local combined heat and power (CHP”) demand, which no longer exists. Due to this, the HRSG is kept in dry preservation and the OCGT operates using the bypass stack, providing black start and short-term operating reserve capability. Open cycle GE LM2500+ GT driving a 36 MVA generator, which is a totally enclosed air-cooled (TEAC”) design rated at 11 kV. The boiler on this unit is currently in dry preservation. The LM2500+, a design based on the very successful heritage of the LM2500 gas turbine, rolled off the production line in December 1996. The LM2500+ was originally rated at 27.6 MW, for a nominal 37.5 percent thermal efficiency at ISO, no losses and 50 Hz. Since that time, its rating has continually  ...

• Heating tunnel INFID: • Year: 2009 • Producer: INFID • Speed (BPH): 7.000 bph • Used Heating tunnel INFID composed of: • 8.5 m2 internal heating tunnel. • No. 2 centrifugal pump for hot water recirculation. • No. 2 recovery tanks with water heating by steam. • Suitable for heating approximately 7,000 bph of 0.750 liters of sparkling wine. • Dimensions: - Length 5,500 mm X width 2,800 mm. • All in stainless steel. • 2-way belt for bottle entry. • 3-way output belt. • Safety protections. • Code Y 10

750 MW each, UNUSED Gas Based Complete Combined Cycle Power Plants 2 units available Technical Specifications: The Project Details: 1. EACH module has two Gas turbines GE 9FA.03 (DLN2+) and one Steam turbine GE D11. Each GT exhaust is directed to the triple pressure unfired, natural circulation horizontal, type CMI USA HRSG. This configuration helps turndown operation of station up to 45%. 2. The Station is based on robust design of GE Gas Turbine with high efficiency DLN2+ Dry low Nox system, each GT is site rated for an output of 235 MW and the triple pressure reheat GE D11 Steam Turbine with downstream Exhaust, is site rated at 266 MW. The HRSG is a Triple pressure, Natural circulation, Horizontal design type with Deaerator atop the LP drum. Thus Net Combined cycle efficiency at Site condition is approx 57% on LHV basis. The inherent design of the gas turbine reduced the N ...

100hl Complete Brewery Location: UK SCADA Controlled 100HL SPR UK brewery capable of 3 brew cycles per day Mash Conversion Vessel Lauter Tun Copper Kettle Whirlpool Porteus Mill System Scada Control System 100hl FV x 4 200hl FV x 3 200hl MV x 6 200hl Bright Beer Tanks x 2 50hl Rough Beer Tanks x 2 50hl Bright Beer Tank FV 50hl Schenk Filtration System Yeast tanks x 5 CIP System x 2 Heat Exchanger x 5 Stainless Steel mixing tanks Stainless Steel buffer tanks Spirax Condensate recovery x 2 Babcock Wanson Steam Generator Abac Air Compressor Water Treatment Plant Various Stainless Steel Pumps Laboratory Equipment CO2 Tank Glycol Chiller

2 nos. GE PG9171E 180MW / 50 Hz gas fired combine cycle gas turbine power plant, year 2004, around 31,000 hr - 34,300 hr, Steam turbine is 60MW each , and complete with heat recovery boiler. Welcome enquiry for buying only 1 or 2 gas turbine or includes engineering works.

With built-in compressed air refrigerant dryer. Refrigerant R 404a. With energy recovery.

1 of used single-infusion brewery, make DME, capacity 32 HL / 20 BBL. RECENTLY Decommissioned – EXCELLENT condition! Brewhouse Single infusion temperature Mash Vessel with Grist Hydrator, Gas fired kettle and separate whirlpool vessel suitable for whole hops and pellets Grain Handling Floor mounted Grist case with flexible grain elevator leading to Grist hydrator Hot Liquor tank 10,000 litre vertical cylindrical vessel with stainless steel shell, shallow cone top and base. 2 x 18kW electric heating element, temperature pocket. 1.5 inch Tri Clamp outlet, Round Top Manway, all in T304. Free standing on stainless steel legs and feet . Insulated on the shell, clad in fully welded stainless steel 2.160,00 mm Diameter x 4.290,00 mm high Cold liquor tank Size and specification as per the above HLT but with a suitably sized external chilling panels Liquor Blending System Te ...

Used membrane ceramic filtration from Mlekomat type FM/55. TECHNICAL SPECIFICATIONS Technical characteristics: -Number of filtration stages: one -Number of membrane modules per stage: one -Number of ceramic membranes per stage: 55 membranes -Module filtration area: 18.9 m2 Process parameters: Milk protein separation: -Average raw material throughput: 3,550 l/h -Compaction ratio: 1,65 x -Average permeate (filtrate): 1,400 l/h -Average volume of retentate (concentrate): 2 150 l/h -Temperature of raw material: ≈ 50 ºC -Compaction temperature: ≈ 52 ºC Whey protein recovery from acid whey: -Assumed quantity of raw material to be processed: 9 000 l -Product quantity obtained: ~250/300 kg (the amount of raw material obtained depends on the composition of the whey fed to the filtration plants and on the correct pretreatment). -Temperature of raw material:  ...

System Components: ​ Control Panels (in control room) Washing Unit - 1 set Control Panel Centrifugal Ventilator - 22KW Booster Pump System - 15HP Pre-Heater - 780,000Kcal/hr - 1 set Control Panel Shot Blast Machine - 1 set Control Panel Bucket Elevator - 2 sets Air Receiver Tank - 3cu.m Dust Collector - 1000cu.m/min Dust Collection Buckets Water Paint Booth - 1 set Control Panel Air Motor - 100PSI - 3 units Air Diaphragm Pump - 1 unit Mixing Bucket - 2 units Paint mixing tools and jigs Activated Carbon Tower - 400cu.m/min 1 set Dry Oven - 300,000Kcal/hr Control Panel Marking Unit - 1 set Control Panel Rectifier IN/OUT Conveyor - 4.6MW x 230.95ML Control Panel ​ Accessories/other items included: Portable Vacuum Recovery - 1 unit Fan - 11KW; 3P; 440V; 60Hz Exhaust Fan - 1,646W; 220V CO2 Mag Welders - ProPAC600A - 3 units Gouging Machine - LH ...

Dishwasher / XL hood dishwasher Winterhalter Model: GS 515 Energy+ Energy saving with heat recovery Stainless steel Powerful and Universal Dishwasher 1.5 and 3 min rinsing time 1 universal basket, 1 plate basket 500 x 500 Color display Power: max. 30 baskets/hr. with drain pump Detergent and clear detergent dosing device Connection 400V, 15.6kW, 32A-CEE plug Jet Water Protection IPX5 Dimensions: 730 x 750 x 1530/2050 mm, WxDxH Used machine cleaned and tested You can find more bakery machines in our large warehouse!

CNC lathe BOLEY type BE 42 - Bi-spindle / twin-turret TECHNICAL SPECIFICATIONS: CN Type: MITSUBISHI Meldas 635LCC X1 axis stroke: 170 [mm] Z1 axis stroke: 200 [mm] X2 axis stroke: 110 [mm] Z2 axis stroke: 395 [mm] X3 axis stroke: 110 [mm] Z3 axis stroke: 170 [mm] Y-axis stroke: -/+ 40 [mm] Tool holder type: VDI 20 Spindle for clamping clamps: Size 48 DIN 6343 Spindle passage diameter: 42 [mm] Mini speed. Pin: 80 [rpm] Maximum speed. Pin: 8000 [rpm] C-axis indexing accuracy: 0.001 [°] Pin power: 7.5 [kW] Counter-spindle passage diameter: 42 [mm] Mini speed. Counter spindle: 60 [rpm] Maximum speed. Counter spindle: 6000 [rpm] C-axis indexing accuracy counter-spindle: 0.001 [°] Counter spindle power: 2.2 [kW] Maximum diameter. Machinable: 140 [mm] Number of positions - Upper turret: 12 Number of motorized positions - Upper turret: 12 Maximum speed. rotating to ...

Adsorption system (absorbing plant, absorption system) used for air purification, activated carbon filter and solvent recovery Air filter, odour filter AMEG Type: DAP 4 exSo "Optima" Dimensions approx.: 3400 x 1400 x 2700 mm Control cabinet: 800 x 600 x 1900 mm The plant cleans air from vapours of organic solvents by adsorption mittles activated carbon filter. A more detailed description of the process can be found in the pictures.

This is a granulate dishwasher from the manufacturer Wexiödisk, type WD-100GR from the year of construction 2016. Wexiödisk granulate pot dishwashers clean all stainless steel kitchen utensils with water added to plastic grains. Even burnt-in grease can be removed quickly and easily. The dishes do not need to be soaked or scrubbed; only loose food residues are scraped off to avoid unnecessary contamination of the rinsing water. Thanks to the unique, double-door push-through system, the WD100GR differs from all other pot washers on the market; The dirt and clean sides are completely separated from each other. The scope of delivery includes the inlet table, the cassette trolley and two cassettes. The inlet table is equipped with a water faucet and a hose holder, so that a hand shower can be installed quickly and easily for pre-rinsing. The dishwasher has undergone a major predictive insp ...

workpiece weight: 100 - 3.000 kg workpiece length: 5.000 mm diameter: 1.260 - 1.600 mm Control: CAP920 total power requirement: 11 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 20 Container m Mobile balancing system SCHENCK for use anywhere in the world The balancing system is permanently installed in a 20 open-top container. The container is equipped with everything you need for balancing • Lighting • Metal base plate 12,000 kg as a base plate for accuracy • Compressor for working air supply distributed in the container • Compressed air connections. • A circumferential power strip • A tool cabinet equipped with tools • A hydraulic lifting device for aligning the container from the outside • In addition to a tarpaulin for the roof, the container also comes with movable roof segments made of sheet metal. • The container has a central plug through whic ...

Variable speed drive. Volume flow 2.9 - 12.22 m3/min. at 7.0 bar. With energy recovery.

Waste Recovery Machine (Opener and Fine Cleaner) OFC machine Year 2018 Model REA 120 Made in EU The function and process: The machine may be used for processing of: -virgin cotton, -cotton wastes, -Jute wastes, -hemp, -linen and other long or short staple fibers. -production capacity is to process 300kg of material per hour The long fibers are cottonized at the entry to the machine, it means the fibers are cut to the short staple length. With the REA – 120 OFC machines can recover up to 85% of LINT may be returned to the process as regenerated fibers. Please note: Rags cannot be opened on this machine. The machine's max. capacity is to process 300kg of material per hour. If we make a basic conservative calculation, we may calculate 250 kg of material per hour and we will obtain approx. 210 kg of good fibers out of that quantity. Calculating one turn of  ...

Variable speed drive. Volume flow 0.95 - 5.58 m3/min. at 7.0 bar. With energy recovery. Without refrigerant dryer!

Horizontal tank made of stainless steel. The equipment was used as a recovery of mother water from a centrifuge. General characteristics: Material Stainless steel With manually folding lid, clamp and tube at the top and clamp discharges (1 in each bottom). Transport dimensions: Height: 900 mm Diameter: 600 mm Length: 1900 mm

mytron 160 K CO2 Double Incubator The CO2 Incubator 160 / 160K provides the "in vitro" growing cell and tissue cultures with environmental conditions that are very close to the physiological values of the organism. Interior volume: approx. 160 l Weight: 70 kg Recirculating air circulation: by fan Cooling: Cooling unit Temperature display: Setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15°C to 70°C at 23°C ambient Temperature constancy: +/- 0.2 K temporal Humidity display: setpoint and actual value display Humidity range: >/=95 % Moisture resistance: +/- 2.5 % CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 constancy: +/- 0.2 % CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 AT WxHxD= 130x85x70 cm More items new and used - you can find them i ...

mytron 160 K CO2 Double Incubator The CO2 Incubator 160 / 160K provides the "in vitro" growing cell and tissue cultures with environmental conditions that are very close to the physiological values of the organism. Interior volume: approx. 160 l Weight: 70 kg Recirculating air circulation: by fan Cooling: Cooling unit Temperature display: Setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15°C to 70°C at 23°C ambient Temperature constancy: +/- 0.2 K temporal Humidity display: setpoint and actual value display Humidity range: >/=95 % Moisture resistance: +/- 2.5 % CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 constancy: +/- 0.2 % CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 AT WxHxD= 130x85x70 cm Buy incubators and other products at low pric ...

Farm Dairy Milk and Cream Pasteur Machines were completely overhauled in 2015 and are in very good condition. Included. - Milk pasteurizer GEA 1000 liters/h (continuous pasteurizer 93% heat recovery) incl. pumps, control, Temperature Recording - Homogenizer Spomaz 1000 liters/h - Seithal centrifuge 1000 litres/h - 2x Coolable buffer tanks (whole milk, low-fat milk) - Cream / yoghurt pasteurizer GEA 300 litres/h (continuous pasteurizer) with Electric heating incl. pump control Temperature recording - Homogenizer Spomaz 300 liters/h - Buffer tank 600 liters - 2x yoghurt tank 600 litre double jacket heating and cooling bar - Manual CIP basin - Siemens S7 for controlling the dairy. - various coupling panels, butterfly valves, leakage disc valves, Pipelines, etc... - Large cooling unit for cooling the pasteurizer and storage tank - 3000 litre cooling water  ...

Blowing moulding machine SIPA 4 cavities • Year: 1998. • Speed: 4.000 bph. • Model: SF 8/4. • 4 cavities. • Format available: 0.5 lt - 1.5 lt - 2.0 lt. • Preform loader. • Preform tipper. • Complete with air recovery system. • Safety protections.

SAVOYE INTELIS packaging machine was built in 2016 in France. The machine is used for example in halls or warehouses, for the fully automatic packing of carton shipping boxes made of corrugated cardboard. All of the devices included in the packaging line are independent and built on the plug and play” concept, which allows easy relocation and installation. The SAVOYE INTELIS packaging line consists of the following devices: – case erecting machine: INTELIS F12 – shrink tunnel: INTELIS T18 – box lid placing machine: INTELIS C12 – glue dispenser: NORDSON PROBLUE The packaging machine is equipped with intelligent conveyors which adjust to the load of the packages and the intensity of work, making the whole packing process smoother. The motors built directly into the rollers operate 100% electrically and thanks to their design and technology used, they save a considerable ...

MINK MV 0312 B Dry claw vacuum pump Dry claw vacuum pump BUSCH MINK MV 0312 B DRY VACUUM – QUIET, EFFICIENT AND COMPACT Quiet operation Low noise level thanks to state-of-the-art acoustic solutions, can be installed at workstations Efficiency State-of-the-art claw technology, low energy consumption, minimized operating costs, almost maintenance-free operation, efficient air cooling Compactness Small size SPECIFICATIONS: Nominal flow rate: 290 m³/h Ultimate pressure: 150 hPa (mbar) Nominal motor power: 5.5KW Nominal engine speed: 3000 min⁻¹ Noise level (ISO 2151): 69 dB(A) Weight (approx.): 300 kg Dimensions (L×W×H): 940 x 500 x 650 mm Gas inlet: G 2" Gas outlet: R 11/4" Dimensional Drawing Dry claw vacuum pump BUSCH MINK MV 0312 B Manufacturer's code MV 0312 B Pumping speed Air at 20°C. Tolerance: ±10% Markets & Applications Biogas P ...

TECHNICAL SPECIFICATIONS Manufacturer: BHS Sonthofen Designation: Rotor impact mill Type: RPMX 1116 Year of construction: 2016 Drive power: 200 kW Rotor diameter x height: 1,150 x 160 mm Grain spectrum: 0 - 15 mm Grinding gap adjustment: 4 - 6 mm Number of rackets: 8 pcs. Circumferential speed: max. 90 m/s Dimensions (LxWxH): 4,600 x 2,000 x 2,800 mm Total weight: approx. 10,000 kg SPECIFIC COMMENT - Factory refurbished 2023 - Rotor wear parts completely renewed - Both outlet shafts renewed - Safety equipment renewed - Ideal for the recovery of valuable materials from metal-containing fine fractions (stainless steel and cable strands) - Without control (but can be offered)

The combined cycle plant consists of a gas turbine, waste heat recovery boiler, steamturbine and a generator, mounted in a single shaft configuration. The capacity of the installation is 53 MW • The prime mover of the installation is an aero derivative General Electric LM6000-PB-DLE. 40 MW - 30,000 hours remaining till next major overhaul - Running hours 74.100 hours , start 3356 - Next overhaul in 5000 hours(hot gas path) - Next major overhaul: in 30.000 hours • The Steam Turbine is a SIEMENS ENK40/53-3, with a capacity of 13 MWe. Dismantled, stored and ready for transport.

weight max.: 5,0 t workpiece diameter: 250 - 2500 mm total power requirement: 0,75 kW load capacity drive unit: max. 2500 kg load capacity rotating unit: max. 2500 kg weight of the machine ca.: 0,9 t The self-adjusting D-HGZ roller blocks adapt to the different Diameters of your workpieces yourself. This roller block is for special designed for heavy-duty activities. Furthermore, this roller block is for Suitable for thin-walled workpieces, as the four wheels per unit are an improved Supply pressure distribution. || Features: | - Electronic components of Top quality | - Infinitely adjustable speed of the drive unit | - Wheels fitted with solid rubber tires enclosed in one Steel construction | - Heavy construction enables very high stability. | - Favorable price-performance ratio enables quick recovery Your investment. | - The D-HGZ series is supplied as a standard version and includes a ...

Depalletizer BORTOLIN Year: 1996 Speed: 8.000 bph. Pallet infeed warehouse - capacity 3 pallets. Layer removal system. Empty pallet recovery warehouse. Layer transfer table on the storage surface. Safety protections.

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

Complete farm dairy for filling milk, yoghurt and butter with fully automatic fillers for gable boxes with screw caps and 95mm yoghurt pots Machines were completely overhauled a few years ago and are in very good condition. Included are: - Milk pasteurizer 1000 liters/h (continuous pasteurizer 93% Heat recovery) including pumps, controls, temperature recording - Homogenizer 1000 liters/h - Centrifuge 1000 liters/h - 2x coolable buffer tanks (whole milk, low-fat milk) - Nimco 550 milk filler with screw cap applicator. Output max. 2500 packs/h, currently set to 1500 packs/h - Cream / yoghurt pasteurizer 300 liters/h (continuous pasteurizer) with Electric heating including pumps, controls, temperature recording - Homogenizer 300 liters/h - Buffer tank 600 liters - 2x yoghurt tanks 600 liters double jacket heatable and coolable - yoghurt pump (worm pump) - Yoghurt filler ...

Qty. 1 Second-hand paper production plant Mfc.: Voith Built: 1982 Modernised: 2001, 2006, 2012 Stopped: 2019 Paper program: GW/Pulp/DIP Width: 5.88 m Weight: 26 – 70 gsm Coating program: Width: 5.78 m Weight: 26 – 70 gsm - 2 x 18 gsm Scope of supply: Fourdrinier paper machine Stock preparation system Vacuum system Heat recovery Bleaching line Coating machine Prewinders Winders Overhead cranes

NuAire NU-8700 CO2 Double Chamber Incubator • Two independently controlled chambers  • Precise temperature stability and precise CO2 and humidity controls  • 100% stainless steel chamber construction • Water jacket with large capacity 75.7 liters • Contacts for remote alarm output • Easy-to-maintain sterile environment with HEPA filtration  The NuAire NU8700 CO2 Dual Chamber Incubator features two precise temperature-controlled chambers with HEPA filtration  for the optimal storage of embryos, gametes and animal tissue.  The microcomputer-based control system independently monitors and controls the temperature,  humidity and CO2 levels in each chamber.  The large water jacket is an ideal heat sink for precise temperature control of +/- 0.2 °C at 37 °C.   The chamber temperature ranges are between 5 °C above ambient temperature and 55 °C.  CO2 can b ...

Brand: Siepla, Model: Minerva 2.2, power: 56 Kw, year: 2011. It is automatic, easy to use and simple. With horizontal design facilitating access to its different parts and maintenance. It works in continuous cycle from the loading of the preforms to the automatic unloading of the bottles. Infrared sensor that measures the temperature of each preform before entering the mold. Air recovery system being two different pressures of compressed air. It converts some of the 35bar air into 10bar air that can be used by the machine itself.

Flash Pasteurizer GEA MICRO 50hl/h for Beer This flash pasteurizer was manufactured in 2018 by GEA Denmark for beer pasteurization and it will soon be dismantled professionally. Pasteurizer is completely built on one stainless steel frame and all equipment and instruments are wired. All product touching parts are polished food quality stainless steel (AISI 316) or special plastic suitable for food processes. The machine has CIP connection for proper cleaning. Product is heated in and cooled after pasteurization in a 3-stage plate heat exchanger (heating, cooling and heat recovery) using low pressure steam for heating and cold water / glycol solution for cooling. Pasteurization takes place in tubular stainless steel holding tube following the heat exchanger. The machine contains a service tank for water during CIP process, heat exchanger, holding / pasteurization tube, control cabinet ...

For sale are many components of the former company Viking Heatengines. A large bundle of machines and spare parts used and new. As well as a container facility. The CraftEngine can be operated with any waste heat source, to generate electricity. The CraftEngine™ can perform heat already below 100 °C and from approx. 50 kW and thus offers a variety of applications for waste heat recovery.

Working width: 2200mm, number of fields: 6, with Three-Roller Foulard Beta, straightening unit Mahlo, weft unit Mahlo Movicat for punching basis weight samples, turret winder Brückner, heat recovery in the exhaust air 1x air/air stage and 1x air/water stage and electrostatic filter for cleaning the exhaust air.

System includes (1) External Device MITSUBISHI PUHZ-ZRP 140 YKA, year of construction: 2013 (2) Roof Ventilator TROX DRVF-H 250/ 28-6, year of construction: 2016, with energy recovery unit.