rear used for sale

Mobile hygiene station / high-pressure cleaner Nilfisk ALTO Food ECOLABTyphoon 50Hz Typhoon is a complete mobile hygiene station for cleaning and disinfecting open surfaces. The mobile phone design allows reaching and cleaning every corner of the food processing rooms, despite the hose length. Typhoon has an integrated water pump that generates water pressure up to 25 bar including inlet pressure and has a maximum water capacity of 50 l/min (13 gallons/min). Housing made of stainless steel/polypropylene plastic. Mobile system solution for cleaning and disinfection of surfaces in the food industry. - Mobile cleaning station for rinsing, foaming and disinfecting with stainless steel centrifugal pump, manual switching between rinsing and foaming, air supply through oil-free compressor, water connection via coupling sleeve. All input and output supplies are located in the uppe ...

Capacity 4100 x 175 tons Stroke 700mm ESA S640 CNC DSP laser on the front Y1, Y2, X, R, Z1 and Z2 CNC controlled Double touch fingers Walk-in security at the rear More photos to follow soon

pressure: 160 t stroke: 400 mm table surface area: 1100 x 635 mm pressing speed: 6,57 mm/sec return speed: 11,62 mm/sec oil pressure max. in the work cylinder: 412 bar oil volume: 40 l dia. of piston: 145 mm column daylight: 1120 mm voltage: 400 V / 50 Hz dist. between pillars (front to rear): 350 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • horizontally moveable pressure cylinder, • working table hydraulical adjustable in height, • cylinder Ø 220 mm, piston base Ø 145 mm. • 2 support prisms • CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I sell a body press for furniture element mount RAMARCH PN31T. Year of construction 1997. Material size 2500 x 1300 x 600mm Version with rear transport track for finished elements. Electropneumatic operation. Manufacturer: RAMARCH, Spain. (But already DYNMA) Very good condition. Available the same.

The machine is in perfect condition. - max. length of bent sheet: 2500 mm - max. thickness of black sheet: 3 mm - pressure stroke: 50 mm - groove depth: 210 mm - min. back bend (1/2 capacity): 25 mm - max. bending angle: 135 ° - bend cover adjustment: 20 mm - rear stop range: 762 mm - segment knife - weight 2000kg By prior arrangement, the possibility of a tour in progress.

Key data: 820 mm, 2000 mm, 515 mm

We offer an exceptionally good precision lathe here. The machine is probably the best German lathe that has been built in this class. BOEHRINGER Precision Lathe Model DUE 800 Year of construction: 1984 Ma.-No.: 04041.01-807 Center height: 400 mm Circulation diameter over bed: 820 mm Circulation diameter via face slide: 515 mm Center width: approx. 2200 mm Effective turning length: approx. 2000 mm Bar clearance: 128 mm Spindle head DIN55022 size 11 Drive power: 30 kW Max. torque: 6300 Nm 24 speeds: 7.1 – 1400 rpm. 60 face feeds: 0.05 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Trustock quill stroke: 280 mm Tailstock taper: MK 6 Space requirement: LxWxH approx. 6700x2500x2250mm Weight: approx. 7500 kg Accessories: 3-axis digital display HEIDENHAIN coolant device; Chip protection rear wall, power chuck Autoblock 500 mm with clamping jaws ...

Key data: 870 mm, 3000 mm, 500 1/min

Stock number: 3861 CNC LATHE Manufacturer: GEMINIS , Type: CNC 5 870 - 3000 Machine NO.: 5852, Year of manufacture: 1996 Specifications: Max. circulation diameter 870 mm dia. Turning length 3000 mm Turning over paddling slide 560 mm dia. Main spindle speed range 40-500 rpm Spindle bore 300 mm dia. Tool turret with 8 stations Total power 47 kW Control Siemens 840C Fabr. Accessories: Chuck Main Spindle SMW BB-630-325 Hollow Air Chuck mm dia Lining Rear SMW BB-630-325 Hollow Air Chuck mm Chip conveying. Tailstock Length: 6000 mm, Height: 2000 mm, Width: 2500 mm, Weight: 7000 kg

sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm weight: 1265 kg dimensions: 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ORDER NO. 6623 TECHNICAL DATA - diameter range of machined pins 200mm - min length of input material 1100mm - infinitely variable feed speed + front/rear - knife head drive motor 15kW - feed motor 1,7kW Successively: - 2 toothed pulling shafts - 4-knife head - 2 smooth pulling pin shafts - electrically adjustable knife head - electrically adjustable shafts - dimensions length / width / height 3570x1300x1700mm - weight about 4000kg ADVANTAGES – German production - the possibility of turning poles into a cone – used turner, very good condition Net price: 159900 PLN Net price: 35533 EUR depending on the price 4,50 EUR (Prices may fluctuate with higher fluctuations)

Vehicle data: Make: Still, Type: R50-15, Drive type: Electric, \Load capacity: 1500 kg, Lifting height: 5000 mm, Year of construction: 0, Internal no.: 10720222, Mast data: Mast type: Triplex, Lifting height: 5000 mm,Construction height: 2400 mm, Dimensions: Height: 2400 mm, Battery & charger: Description & Special equipment: Attachments: Side slider, Special equipment: Front tyres: 0 x / Rear tyres: 0 x / / Description: Still, 1.5to electric forklift R50-15. Lifting height 5.00m and height 2.40m. Triplex mast with side slider. Very good condition with few operating hours, original paint. Price from stock Saarburg from 6.700,-- plus VAT

Manufacturer GEMINIS Model GHT-4 720 x 3000 Year 2004 CNC FAGOR 8055 TC/B Capacities and feeds Max. swing over bed 720 mm. Max. swing over cross slide 470 mm. Height of centres from flat guide 366 mm. Distance between centres 3.000 mm. C Axis and driven tools INCLUDED Fast feedrate X/Z axis 8.000 mm/min Work feedrate X/Z axis 8.000 mm/min Headstock Main spindle bore diameter 92 mm. Main spindle nose DIN-55027-11 Spindle diameter on front bearing 150 mm. Spindle speed 0-1600 Spindle automatic ranges 2 Main spindle power 17 / 20,5 kW Spindle torque 1590 / 1920 Nm Tailstock Ø Tailstock Quill 100 mm Tailstock travel 200 mm Taper Morse 6 Bed Width 430 mm. Height up to flat guide 775 mm. Turret Turret type Sauter VCI50 Ø400 mm. Driven tool position at turret 8 Driven tool power 5.5 kW Additional equipment 3 jaw auto-centering chuck SHW Autoblock 315 BH  ...

pressure: 200 t chamfer lenght: 4100 mm distance between columns: 3150 mm stroke - stepless adjustable: 200 mm column arm: 300 mm table height: 1090 mm dayligth: 450 mm working feed: 9,0 mm/sec return speed: 80,0 mm/sec Control: NC ATL 550 hydraulic: 265 bar voltage: 380 V total power requirement: 18,7 kW weight: 15000 kg range L-W-H: 4400 x 1900 x 3000 mm Furnishing: - NC controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control ATL 550 Positioning of backgauge ( X ) Depth setting positioning ( Y1+Y2 ) Possibility of programming different programs Storage capacity max. 200 programs - max. 400 sentences Pivoting control panel, front left - electric backgauge, on ball screws with 2 stop fingers, manually adjustable - manual table crowning, with analogue display Adjustment at the front left, with a hand crank - divided deer foot upper tool 85° - reversible Mul ...

WSM Stationary screwdriving unit Screwdriving station Assembly station Automatic station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started. 4.6.2 Functional sequence This station consists of 4 substations: St 4.1 Screw chassis: - optical inspection of the core hole position 6 - Positioning of the screwdriver by means of XY-Z servo axis port - 5x screwing from above St. 4.2 Mounting LW angle: - manual placement of the LW angle on the cycle belt handling - eject and position the LW angle by  ...

Number of working hours: 3330 h axial load -forward: . kg axial load - rear: . kg serial number: 44316100009610 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I sell a panel dividing saw Paoloni Fimal Concept 350. Built in 2016. Cutting length 3200mm. Cutting height 95mm. Saw blade swivel 0-45° Main motor 5,5kW MOTEK Combined area W.4000mm x D.3000mm 3 pcs. Parallel posizionaire with double posizion regulazion for short or wide dimensions. 2 pcs. Posozionary manual on the additional rear stop 2 pcs posozionary left manual with digital display 2 posozionary on the angular stop Very good condition. Available the same. Incl. full documentation and CE certificate.

Electrically adjustable back gauge Manual cutting angle adjustment Light screen protection at the front and rear 1348 power hours

Key data: 460 mm, 400 mm, 460 mm

Control: Fanuc 32 iTB - Turning length: 400 mm - Turning diameter: 460 mm - Circulation diameter over carriage 460 mm - Tool holder directly - Tool turret with 12 positions Equipment - Rear chip conveyor with double chain - Electronic handwheel - High pressure coolant pump (6 bar 55l/min) - High pressure coolant pump (15 bar 55l/min) - 3- Jaws power chuck in main spindle - Hydraulic hollow clamping cylinder - Special gantry enclosure - GL6 – 2 axle CNC gantry loader with a Capacity of 2 x3 KG (Travel to the right side) - Electric 2x180° triple swivel gripper - Workstocker WS-280 x 400 x 14 - 14 individual pallets, each with 13 auto-centering support rods

ascobloc Panorama circulating air cooling cabinet + base cabinet Stainless steel Circulating air evaporator - vertical air flow from rear to front Optimal illumination of the display case interior through space-saving lighting Sliding doors for easy opening Dimensions cabinet approx. 154x83x88 Dimensions top display case approx. in brief

SCM machining center model RECORD 130TV: - axis travel X=4330 - Y=1720 - Z=300mm - useful working range 3830 x 1245mm - piece passage 280mm - worktop with 6 TV bars - laser for positioning aid - supplied with 12 suction cups and 12 clamps for TV bars - 3 loading aids - rubbish drain mat - 100 mc/h vacuum pump - automatic lubrication - optimized and centralized suction - electronic control with PC-OFFICE, in Windows system and XILOG PLUS interface - dimensions installed with protections mt 8,4 x 5,9 Operator groups: - vertical spindle type POWER2000 liquid cooled, motor KW 11 with inverter, HSK63F connection, with 4th vector rotating axis, served by: Dual RAPID tool changer at 12 + 12 positions rear tool room with 12 + 12 positions - UNIVERSAL K horizontal milling unit with 2 outputs (tip + blade), adjustable 0-90° , KW 3 motor Machine according to CE standards No ...

I sell a double end cutting and milling machine FRIULMAC IDRAMAT, built in 2007. Working width up to 2500mm Configuration left side / fix: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 + 1 pcs. groove saw units front + rear with jump Configuration right side / movable: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 pcs. special milling unit on top / 5.5 KW Material pressure band with support from above. Special design, also suitable for side dimensioning. Continuous machine. Siemens Simantic control panel. Condition Very good. Available the same.

Dough dividing and warping machine Bread roll press Fortuna Automat Gr. 3+ with active cabling circuit Head cleaning to the rear electric Partial head with stainless steel measuring device NEW Dough insert up to 2400g depending on TA Dough divider with 3 new knitting plates E-system NEW with return button DGUV V3 tested Protective visor Connection 400V, 1.6 kW, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine overhauled with 6 months warranty Option: Platform or chassis

Capacity 2000 x 4 mm Adjustable backgauge Walk-in protection at the rear

Dough dividing and warping machine Bread roll press Fortuna Automat Gr. 3+ with active cabling circuit Head cleaning to the rear electric Partial head with stainless steel measuring device NEW Dough insert up to 2400g depending on TA Dough divider with 3 new knitting plates E-system NEW with return button DGUV V3 tested Protective visor Connection 400V, 1.6 kW, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine overhauled with 6 months warranty Option: Platform or chassis Visit our large bakery machinery warehouse!

Dough dividing and warping machine Bread roll press Fortuna Automat Gr. 3+ in large selection in stock! with active cabling circuit Head cleaning to the rear electric Partial head with stainless steel measuring device NEW Dough insert up to 2400g depending on TA Dough divider with 3 new knitting plates E-system NEW with return button DGUV V3 tested Protective visor Connection 400V, 1.6 kW, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine overhauled with 6 months warranty Option: Platform or chassis

Capacity 3100 x 8 mm Equipped with newer touch controls Adjustable backgauge, cutting angle and cutting clearance Elevated table at the rear

Bread roll press Dough dividing and warping machine Fortuna Automat Gr. 3+ with active cabling circuit Head cleaning to the rear Partial header newly revised with stainless steel knife NEW Dough insert up to 2400g depending on TA Dough divider with 3 new knitting plates with return button E-system NEW DGUV V3 tested Connection 400V, 1.6 kW, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine overhauled with 6 months warranty only on spare parts Option: Platform or chassis

Capacity 3100 x 10 mm DT-7 Touch control Adjustable backgauge and cutting clearance Elevated table at the rear Walk-in protection

Dough divider bread roll press Fortuna Automat Gr. 3+ with active cabling circuit Head cleaning to the rear Partial header newly revised with stainless steel knife NEW Dough insert up to 2400g depending on TA Dough divider with 3 new knitting plates with return button E-system NEW DGUV V3 tested Connection 400V, 1.6 kW, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine overhauled with 6 months warranty only on spare parts Option: Platform or chassis

Capacity: 3100 x 6mm Electric back gauge Walk-in security at the rear

I'm planning to part with my super, fully functional gas forklift. Metal body, super stable. Compactly built, yet with an enormous lifting height and load capacity. It still belongs to the generation of robust working machines. Gas drive. No leaks in the hydraulics. New rollers in the lift mast. Lifting mast tested. — Clark forklift CGP 30. — YOC '98 — Load capacity of 3 tons. — Lifting height of 5.52 meters. — Triplex mast. — Side shifts. — Safety windscreen. — Windshield wipers. — Lighting. — Rear hazard lights. — Additional 2 exterior mirrors. — In addition, a total of 3 pairs of forks. 1x 1.2 meters 1x 1.8 meters 1x 2.4 meters partly as good as new. Crack test carried out, everything was great. — Load guards. — Safety driver's cage with plexiglass. — Includes manual. Signs of wear, paint worn, seat area worn through, lit ...

Dough dividing and warping machine bread roll press Fortuna Automat Gr. 3+ with active cabling circuit Head cleaning to the rear Partial header newly revised with stainless steel knife NEW Dough insert up to 2400g depending on TA Dough divider with 3 new knitting plates with return button E-system NEW DGUV V3 tested Connection 400V, 1.6 kW, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine overhauled with 6 months warranty only on spare parts Option: Platform or chassis Visit our large bakery machinery warehouse!

Bread roll press Dough dividing and warping machine Fortuna Automat Gr. 2 with active cabling circuit Head cleaning to the rear with hand crank Partial header newly revised Stainless steel knives NEW Dough insert 750 to 2000g depending on TA, 25-67g unit weight Dough divider with 3 new knitting plates E-system NEW DGUV V3 tested Connection 400V, 1.6 kW, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine overhauled with 6 months warranty Option: Platform or chassis Come to our large bakery machinery exhibition!

Dough divider - bread roll press Fortuna Automat Gr. 3+ with active cabling circuit Head cleaning to the rear electric Partial header newly revised with stainless steel knife NEW Dough insert up to 2400g depending on TA Dough divider with 3 new knitting plates E-system NEW with return button DGUV V3 tested Connection 400V, 1.6 kW, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine overhauled with 6 months warranty Option: Platform or chassis come to our large bakery machine warehouse!

This OKUMA 2SP-V80 Lathe was manufactured in the year 2002. It is equipped with a twin turrets and spindles. The machine disposes of a 2 chip conveyors with rear exit, 2 3-jaw Hydraulic chuck and a remote manual pulse generator.

Manufacturer GEMINIS Model GHT-5 G2 1000 x 9000 Year 2.007 CNC HEIDENHAIN 4110 MANUAL PLUS Capacities and feeds Max. swing over Bed Ø 1.000 mm. Max. swing Ø 1.000 mm. Max swing over cross slide Ø 680 mm. Center height 500 mm. Distance between centres 9.000 mm. Rapid feed (X/Z) 8 m/min Main Spindle Turning speeds 0-1400 rpm Quill travel 102 mm. Spindle nose DIN-55026 -B11 Spindle automatic ranges 4 Main spindle power 37 kW Turret Turret positions 8 Turret type VDI 50 (Ø 470 mm) Driven tools power 5.5 kW Tailstock Tailstock quill travel 300 mm Ø tailstock quill 140 mm Max weight between centres Without steady rest 4.800 kg With 1 steady rest 5.500 kg With 2 steady rests 6.200 kg Extra Equipment C Axis and driven tools INCLUDED 1 Axial driven toolholder INCLUDED 2 radial driven toolholders INCLUDED 25 tool holders (VDI 50) INCLUDED 10 set of Jaws  ...

sheet width: 3220 mm plate thickness: 2,0 mm daylight opening: 160 mm adjustment: 80,0 mm bending angle max.: 120 ° total power requirement: 4,0 kW weight: 3.965 kg range L-W-H: 4575 x 2450 x 1550 mm Furnishing: - Motorized universal folding machine for single and series production - rotating upper beam / as an automatic tool changing system Reduces set-up and idle times - SCHRÖDER CNC control model POS 2000 with touch screen control panel Color display USB interface automatic cutting calculation Materials and tools library precise bending simulation - Servo converter controlled drives for bending/upper beam beam & electr. backgauge - CNC motorized lower beam adjustment - CNC electrically movable backgauge - with rear sheet metal support surface, including ball casters - Bending/upper tools : Station 1: 1x pointed rail Station 2: 1x split goat foot tool - Free-moving double  ...

: 1550 mm : 4,5 mm : 4,0 mm roll diameter: 140 / 210 mm : 2,2 kW : 1210 kg : 2650 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 10 mm rear stop: 1000 mm throat: 350 mm cutting angle: 2,0 ° down holder: 14 Stk no. of strokes: 13 Hub/min total power requirement: 22 kW dimensions of the machine ca.: 4050 x 2500 x 2170 mm weight of the machine ca.: 10575 kg -------------------------------------------------- --------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- --------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.tra ...

Capacity 3100 x 6mm Elevated table at the rear Walk-in protection Return to sender Scrap bin option at the front Machine has just arrived, more photos and information on request

used baler Manufacturer: PAAL Type: CPH 6540 Machine number: 29600 Year of construction: 2008 Main parts of the press: 1 automatic channel press 1 automatic lacing 1 hydraulic system 1 electrical control Press force at approx. 300 bar: 650 kN Duct cross-section (h x w): 75 x 100 cm Filling opening (l x w): 160 x 92 cm Number of binding wires: 4 pieces Power: - Wire pull: 3 kW - Twisting: 3 kW - Main drive pump: 75 kW Hydraulic oil tank volume: 2200 l Machine weight: approx. 14 t, depending on equipment Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Press complete for continuous operation including: Machine design consisting of: - Pressure plate with roller guide mounted on the inside at the bottom, - Press box floor made of highly wear-resistant special steel, - replaceable, screwed running dies for the lower pr ...

Capacity 3080 x 6mm Delem DAC 350 cnc control Elevated table at the rear

sheet width: 3100 mm plate thickness: 6 mm rear stop: 1000 mm throat: 350 mm cutting angle: 0,5 - 1,5 ° down holder: 14 Stk no. of strokes: 16 - 24 Hub/min total power requirement: 11 kW dimensions of the machine ca.: 4100 x 2200 x 2190 mm weight of the machine ca.: 7060 kg -------------------------------------------------- --------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- --------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up a ...

sheet width: 3100 mm plate thickness: 6 mm rear stop: 1000 mm cutting angle: 1,2 ° down holder: 14 Stk no. of strokes: 18 Hub/min total power requirement: 11 kW dimensions of the machine ca.: 4.000 x 2.100 x 1.640 mm ----------------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment ----------------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support ar ...

sheet width: 3100 mm plate thickness: 6 mm rear stop: 1000 mm cutting angle: 1,2 ° down holder: 14 Stk no. of strokes: 18 Hub/min total power requirement: 11 kW dimensions of the machine ca.: 4.000 x 2.100 x 1.640 mm ----------------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment ----------------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support ar ...

equipped with double crankshaft with rear gear transmission; incl. decoiler; bending machine for strip material; Sound-absorbing cabinet and outfeed belt

equipped with double crankshaft with rear gear transmission; incl. decoiler; bending machine for strip material; Sound-absorbing cabinet and outfeed belt

sheet width: 3100 mm plate thickness: 10 mm rear stop: 1000 mm throat: 350 mm cutting angle: 2,0 ° down holder: 14 Stk no. of strokes: 13 Hub/min total power requirement: 22 kW dimensions of the machine ca.: 4050 x 2500 x 2170 mm weight of the machine ca.: 10575 kg -------------------------------------------------- --------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- --------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.tra ...

Labeller STS | 2015 Adhesive: 2015 Speed: 1.200 bph Direction: linear (from sx to dx) 4 adhesive stations Labeller: Front, rear, collar e seal) Safety Protections.

Band saw; wheel diameter 1400, wheel width 135mm, maximum saw opening 750mm, frequency regulator for cutting speed/feed speed, discharge belt rear saw 500x3300mm motor power 1.5kw, motor power 37kw, connection 200mm: clamping truck; length 6750mm, equipped with 3 electrically operated arms, with computer cutting thickness, transport size 6750x1700x2250mm; Rails and accessories total length 15 mtr in 3 segments, motor power drive 5.5 kW. Please note! Lot has already been dismantled

The hydraulic brake with the valves have been renewed, the control unit of the lifting mast, control lever for lifting, lighting system repaired, the drive battery 80 V is no longer new but can still be used for normal use, the attachment including fork positioner has signs of wear, the current failure of the attachment has to do with a cable break in the rear control area, with cab and charger, UVV and maintenance up to date.