re saw used for sale

CMS automatic package cross cutting system, Type PMI 120 / EL+L+REG, Manufacture year 2014, - Max. pack size 5000 x 1200 x 1200 mm, - Saw motor 9.2 kW, - Touch screen cnc controller, - Waste conveyor

Size: 1400 mm Equipments: Register punch Good condition

: ja : 094089 spindle speeds:: linka 2100 weight of the machine ca.: 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Linear unit, linear axis, portal axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripperREXROTH INDRAMAT Type: MKD0771B-061-KP1-KNIdent No. 247238 0001Year of construction: 2000Axis movement: 2400 mmCarriage length: approx. 500 mmTotal length: 3520 mm- pneumatic feed pliers (clamping pliers with 2 Festo compressed air cylinders)- Standard linear guide 65 x 25 mm- basic profile made of steel- ball screw 32 x 10 mm- pneumatic with position indicator- Permanent Servo Motor Type:

Hydraulic power unit BOSCH REXROTH Year of construction approx. 1970Operating pressure Nominal capacity: 50 barOperating pressure: max. 70 barVolume flow: approx. 40 litres/min. Tank capacity: 240 litresEngine power: 4 kWNee connection: 380 volts, 50 Hz- 1x electric hydraulic valve BOSCHPlating requirement length: 1020 mm, width: 610 mm height: 1000 mmown weight: approx. 170 kg; used

Hydraulic power unit with hydraulic pump BOSCH REXROTHHydraulic power unit Year of construction approx. 2000Operating pressure pump1: 10 barVolume flow pump1: 24 litres/min. Engine power pump1: 1.5 kWoperating pressure pump2: 120 bar (max.140 bar)Volume flow pump2: 44 litres/min. Engine power pump2: 11 kWTankle capacity: 200 litresMains connection: 400 volts, 50 Hz- 2 independent hydraulic pumps, each with its own drive motor- 6 hydraulic valves built- Cleaning cover in the oil tankSpace requirement L x W x H 1000 x 700 x 1200Weight:

Hydraulic Power Unit, Hydraulic Power Unit BOSCH REXROTH Order No: 983885 Year of Manufacture 1982Tank Capacity: 150 LitresOperating Pressure: 60 bar Nominal Pressure / Max. 100 barVolume Flow: 20 Litres/min. Motor power pump : 3 kWNetz connection: 380 volts, 50 Hz.- 1 piece hydraulic pump BOSCH REXROTH, type 1PV2V3-40/25 RAO1MC63- 2 pieces hydraulic valve BOSCH REXROTH with electric solenoid coil, type E6 E51/AG24NZ4- 2 pieces hydraulic valve BOSCH REXROTH with electric solenoid coil, type 4WE10D10OFLG24NZ4- 1 piece pressure accumulator- various throttle valves, pressure regulators and

Hydraulic power unit with hydraulic pump BOSCH REXROTH / HYDRONORMAHydraulic power unit Year of construction approx. 1985Operating pressure: max. 65 barVolume flow: 20 litres/min. Fuel tank capacity: 110 litersEngine power: 3 kWMortor speed: 1440 rpm. Mains connection: 400 volts, 50 Hz- 1 piece hydraulic vane pump MANNESMANN REXROTH, type 1PV2V3-40/25RA01MC63A1- 1 piece drive motor KATT, type FFN 100L- 1 piece pressure reducing valve BOSCH REXROTH, type DR 8 G433/100 YM- 1 piece return filter- 1 piece 4/2-way hand valve (e.g. for retracting and extending a double

Table unit from a DROOP & REIN portal milling machineClamping plate with T-slots made of cast steel-gray cast ironTable unit with clamping plate and very solid guidewayTable clamping surface 5500 x 2000 mmTravel distance of the table clamping plate approx. 3100 mmTable height-height 1050mmTable load: max. 20 ton. Ball screw: 100 mmThread pitch: 20 mm (single)- Machining table very stable on the bed- Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine- Longitudinal table movement over

Hydr. Hacksaw (Made in Croatia) Type BS 320Year of construction approx. 1980Saw range Round 320 mmSaw area Square 280 x 280 mmSaw blade 550 x 45 x 2.25 mmMaterial Inlet height 680 mmSaw speed 42 - 55 - 85 - 110 strokes/min. Motor power 1.8 and 2.4 kW Pole switchableMains connection 400 volts, Hz- Mitre adjustment up to 45- Saw motor with 2 speeds and 2 V-belt steps- Hydraulic saw bracket lowering- Hydraulic cutting pressure adjustment via throttle valve- Coolant device in the

Impulse Shielded Gas Welding Machine REHM Type RMP 400 Hybrid (REHM Mega Pulse)Pulse Welding Machine with Inverter Welding Power SourceFabr. No. 065013 built in 1998Power 400 Amp. = 60% ED 320 Amp. = 100 % EDEinfinitely variable adjustment rangeMains connection 400 Volt, 50 Hz, 32 Amp. Plug - separate 4-roll wire feeder with connecting hose pack meter - Digital display for voltage and current- Pulse welding device with single and double pulses - 2-stroke and 4-stroke welding device - 4 meter Binzel hose pack with

Dough dividing and casting machine, type Multimatic C, 4 rows,

A Zippel single-chamber cleaning system is available. Number of containers: 2, container volume: 300l, usable volume: 600l, usable height: 850mm. On-site inspection is possible.

A Reichenbacher CNC multi-spindle woodworking center with automatic support table and vacuum pins is available. Traverse path X1/X2: 8540mm, traverse path Y1: 2500mm, traverse path Z1: 480mm, swivel B: 180°, swivel C: 360°, X3 axis: underfloor drilling unit, U2-U10: carrier movement 1-9 (gantry), axis speed X/Y/Z: 60m/60m/20m/min, turning speed B/C: 90°/s, table dimensions X/Y: approx. 8500mm/2600mm, max. workpiece weight: 150kg, max. workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9. Workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9, suction plates per carrier: 8, suction plate diameter: 100mm, carrier positioning: +/-1000mm, min. carrier distance: 300mm, total vacuum pump number: 72, vacuum pump stroke: 100mm, vacuum pump useful stroke: 25mm, tool positions: 24, max. tool weight: 6kg, max. tool length: 240mm, max. tool diameter: 300mm. Total system dimensio ...

MACHINE À INJECTION - SOUFFLAGE PROCREA TYPE Rev 300 Cette machine d’injection soufflage PROCREA REV 300 peut produire des récipients à corps creux complètement finis, sans déchets comme moulés en injection avec différentes matières plastiques, avec des cycles complètement automatique, capacité de 50 cc. à 15 litres et poids de 20 gr. à 700 gr. Cette machine est prédisposée pour fonctionner avec des moules de 1 à 8 empreintes et la production est très élevée grâce au système à revolver qui accomplit toutes les opérations d'injection, soufflage et éjection de la pièce finie dans un seul stade. La construction des moules pour la Rev 300 est très simple grâce au système automatique d'extraction appliqué au revolver.

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 40,680 mm Laebtwcew Davmjpdnjd Number of fields / row of shelves: 01 pcs. á 3,600 mm Number of levels plus ground level: 02 pcs. Technical data on the volume: Pallet spaces per field: 12 pcs. Pallet spaces per row of racks: 132 pcs. Total pallet spaces: 132 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): n/a The scope of delivery includes: 12x Pallet rack stand, used Material colour: sendzimir galvanised Frame Type: P95 Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 3,000 mm high 1,050 mm d ...

Kraus and Reichert Kuris KVS700 Bumper Knife Machine Fabric Cutter Textile Item condition: Used and tested for function. _RD 6kg More textile machines - new and used - can be found in our shop! International shipping costs on request!

Agitator 0.37 KW with aluminium propeller 300 mm Electric motor: Electric motor 0.37 KW, 3 x 230/400 volts, n = 1400 rpm, Weight approx. 15 kg. Wave: Precision stainless steel shaft D14, length 500 mm, diameter 14 mm, Material: Stainless steel 1.4301. Stirring organ: Used double-bladed aluminum propeller d = 300 mm.

Manufacturer : Pallmann Grinding disc diameter : 1200 mm

Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 5,335 mm Number of fields per row of shelves: 04 pcs. Number of levels: 06 pcs. The scope of delivery includes: 05x Shelf stand, new product Material colour: sendzimir galvanised Frame profile dimensions: 31 x 60 mm incl. gravel bars and base plates The stands are pre-assembled 2,278 mm high 800 mm deep 24x Shelf, used Material colour: sendzimir galvanised Dimensions: 1,282 x 800 x 40 mm Weight | Pcs.: approx. 12.82 kg 02x Cross bandage, used Description: KV31313 Material colour: sendzimir galvanised Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any addition ...

Inv. Num. : 8583 Type: REP 100 Producer: Heilbronn Created: 1989 Parameters: Compressive force: 100 t Stroke length: 6-100 mm Maximum stroke rate per minute: 100 1/min Total power requirement: 11 kW Machine weight: 7000 kg

x-travel: 4500 mm y-travel: 3800 mm z-travel: 1850 mm column daylight: Z = 1900 mm column daylight: Y = 5330 mm table surface area: 4500 x 4600 mm table load: 50 t milling head speed: 40 - 2000 U/min feeds x/y/z -stepless: 6 - 4000 mm/min rapid travel x/y/z: 6000 mm/min milling drive: 40 kW milling spindle diameter in the forward pos.: 160 mm tool taper: Steilk. 60 milling spindle quill diameter: 260 Control: Siemens 840D total power requirement: ca. 60 kW weight of the machine ca.: 115 t dimensions of the machine ca.: 10,0 x 5,0 x 5,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used head machine KÖNIG, type: Mini Rex Futura AB -in good bakery condition- - Head machine / dough divider: KÖNIG Mini Rex Futura AB - Knitting roller: SKG54 and RKG58 for round and square dough pieces - 2 rows - Weight range: 25 - 75 g for round - Weight range: 40 - 85 g for square ones - Capacity: max. 2,000 pcs./h - Band very good condition - Condition: Very good, ready to use Suitable for wheat and rye doughs (up to 40% rye content). Visits and test runs are possible by arrangement.

Hardly used, in very good condition. There is no longer any need for sale.

800 litre cleaning tank/ storage tank made of V2A Properties: Volume 800 L Material V2A (AISI 304) 1.4301 Total height 2600 mm Cylinder height 1100 mm Inner diameter 1000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Last Use: Chemical Industry Description: Topsoil: curved bottom Threaded Socket DN 65 Manhole DN 400 Agitator with steam heating inlet Tank cylinder: Beading Subsoil: Cone base screwed on with pedestal forward-drawn residual drain pipe with disc valve DN 50

grinding wheel diameter: 200 mm wheel width max: 32 mm grinding wheel hole diameter: 51 mm grinding wheel speeds: 2900 U/min engine output: 0,9 kW Double wheel grinder mounted on stand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data for the pallet racking system: Shelving system: Vogelsang Type: NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves : 13,920 mm Number of fields per row of shelves: 05 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Pallet spaces per row of shelves: 45 pcs. Total pallet spaces: 45 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 900 kg The scope of delivery includes: 06x Pallet rack stand, new Material colour: sendzimir galvanised Profile dimensions: P 70 x 80 x 2.50 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 4,200 mm Depth: 1,100 mm 20x Pallet rack crossbar, used Material colour: orange Box profile: 110 x 50 mm Agraffe: ...

pressure: 200 t table length: 1600 mm table width: 1300 mm dayligth: 1700 mm total power requirement: kW weight of the machine ca.: 19 t dimensions of the machine ca.: 2,95 5 6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: MPB Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves : 36,300 mm Number of fields per row of shelves: 09 pcs. Number of levels plus ground level: 06 pcs. The scope of delivery includes: 10x pallet rack stand, new Material color: blue Stand Type: STD ́DB ́30 Profile dimensions: 120 x 92.5 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 11,500 mm Depth: 1,100 mm 108x Pallet rack crossbar, used Material colour: yellow Box profile: 160 x 50 mm Agraffe: 4 HK (hooks) Clear width: 3,900 mm 216x Safety pin, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting 40x bolt anchors, new Manufacturer: Hilti Type desi ...

Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: MPB Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves : 36,300 mm Number of fields per row of shelves: 09 pcs. Number of levels plus ground level: 06 pcs. The scope of delivery includes: 10x pallet rack stand, new Material color: blue Stand Type: STD ́DB ́30 Profile dimensions: 120 x 92.5 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 11,500 mm Depth: 1,100 mm 108x Pallet rack crossbar, used Material colour: yellow Box profile: 160 x 50 mm Agraffe: 4 HK (hooks) Clear width: 3,900 mm 216x Safety pin, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting 40x bolt anchors, new Manufacturer: Hilti Type desi ...

Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: MPB Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 40,300 mm Number of fields per row of shelves: 14 pcs. Number of levels plus ground level: 06 pcs. Technical data on the volume: Pallet spaces per field: 21 pcs. Pallet spaces per rack row: 294 pcs. Total pallet spaces: 294 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 400 kg The scope of delivery includes: 15x Pallet rack stand, used Material color: blue Stand Type: STD ́DB ́30 Profile dimensions: 120 x 92.5 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 11,500 mm Depth: 1,100 mm 168x Material colour: RAL 1007 d ...

A gear flank grinding machine Reishauer, completely overhauled by Burri Werkzeugmaschinen, is available. Grinding spindle speed: 3500rpm, cutting speed: 63m/s, max. gear diameter: 360mm, module range: 0.1-7, number of teeth: 6-600, max. workpiece height: 160mm, max. helix angle: +/-45°, max. workpiece weight: approx. 60kg. Min. wheel root circle diameter: 250mm, grinding wheel dimensions X/Y/Z: 350mm/104mm/160mm, grinding worm diameter range: 270mm-350mm, max. grinding width: 175mm, max. workpiece speed: 800rpm. Includes profiling devices, balancing device, structure-borne noise contact control, compact filter system, cooling unit, cooling water recooler, robot automation, and transport trolleys. Documentation available. An on-site inspection is possible.

liter capacity: 120 l feed pressure: 218 bar coolant capacity: - l electrics - voltage/frequency: 380 / 50 V/Hz filter pump: 150 kW total power requirement: 14 kVA weight of the machine ca.: 1,5 t AF-Automatic pre-coat filter with return-flow cooling of gthe grinding oil and the hydraulic fluid The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 570 : 365 turning length: 1000 mm control: Sinumerik 850 turning speeds: 2500 U/min spindle bore: 62 mm weight of the machine ca.: 5,6 t dimensions of the machine ca.: 6x2,5x2 m The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then talk to us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A complete extrusion line with a Reifenhäuser extruder and a gravimetric system Plast-Control (2006) is available. 1) Unwinder 1. 2) Primer unit and hotmelt unit for water-based adhesive lamination. 3) Dryer. 4) Unwinder 2. 5) Dolci extruder for extrusion lamination. 6) Unwinder 3. 7) Two printing units with additional dryer. 8) Extruder Reifenhäuser. 9) Rewinder. 10) Guide roller in the basement. 11) Web guiding under unwinder 1 in the basement. 12) 2x resin silos in the basement. This is a complete extrusion line with peripheral equipment. Documentation available. An on-site inspection is possible.

Paving stone system MASA RECORD 9001 VB with compl. Mixing plant Paving stone plant and finger crane S7, packing line Rekers plc, rest of wet & dry line S5, board size: 1450 x 1100 x 40 mm, Number of boards + - 5000 pieces & 5 molds, max. product height: 14 cm paving stones without the need to adjust the lift/lowering buffer and finger crane. Curbstones up to 1 m in length and 30 cm height can be held between the fingers without adjustment. Board stacks: 1800 boards. 28 boards per stack Curing chamber: Rotho, freestanding Mixing plant: MASA control system Paint mixer: MASA HM 500/750 Main Mixer: Masa HM 2000/3000 Cement silos: 3 silos of 90 m³ and silos of 40 m³ Output per 8 hours: 2000 m² standard paving stones 10.5 x x21 x 8 cm

Technical data for the pallet racking system: Shelving system: Arestant Type: NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 16,760 mm Number of fields per row of shelves: 06 pcs. Number of levels plus ground level: 03 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Pallet spaces per row of racks: 36 pcs. Total pallet spaces: 36 pcs. Note: The visual materials serve to illustrate the material. The quantities shown may differ from the scope of delivery! The scope of delivery includes: 07x Pallet rack stand, used Material colour: sendz. galvanized Profile dimensions: 80 x 70 x 2 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 6,005 mm high 800 mm deep 36x Pallet rack trusses, used Material colour: orange Truss Type: M14051 Box profile ...

Cup wheel Ø: 180 mm Cup wheel speed: 2900 rpm electr. Connection: 380 V, 2900 rpm, 0.9 kW Vibration table dimensions: 200 x 350 mm Tilting Swinging Table Swing table swivels by +/- 20° Dimensions: 750 x 350 x 1270 mm

Height=1.35 m, Overall length= 0.74 m, Overall width= 0.97 m, Net weight= 250 kg,

Height=0.4 m, Overall length= 0.45 m, Overall width= 0.45 m, Net weight= 20 kg,

Height=0.46 m, Overall length= 0.63 m, Overall width= 0.59 m, Net weight= 48 kg,

Rietschle Vacuum Pump TYPE: CEV3709-S4 (11) Built in 1993 Motor power 0.75 kW 2850 rpm 50Hz IP54

Capacity: 4517l, operating pressure at 20°C: 3atü. An on-site inspection is possible. Can be used for liquids.

1 color offset Roland Rekord 3B, format: 710 x 1020, in production ready condition.

5 layer die head, without extruder and cooling ring Manufacturer: Reifenhäuser Year of manufacture: 2018 Nozzles: 350mm diameter Capacity: 420 kg/h Product examples: Collation Shrink: 16%/14%/40%/14%/16% Standard packaging film 16%/16%/36%/16%/16% Laminating films : 14%/22%/28%/22%/14% The following extruders were mounted: 60/60/90/60/60