re saw used for sale

x-travel: 1050 mm y-travel: 560 mm z-travel: 520 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type: MIG/MAG welding machine Make MERKLE Type RedMIG 3000 K Appendix No. 132.175 Connection voltage 3 x 400 volts Adjustment range 25 – 280 amps Duty cycle 35% ED at 280 amps 60% ED at 240 amps Current setting 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive DV 26 Fuse 16 Ampere Dimensions L x W x H 940 x 445 x 760 mm Weight 120 kg Age 3 years Condition workshop tested, very good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Equipped 1 pair of welding gloves 1 Piece Instruction Manual Warranty 24 months from ...

Rego Herlitzius Shop Sickle knife machine Stainless steel version mobile Manual operation via rotary control Cutting width 3 - 16mm Connection 400V, 16A-CEE plug Bread chute: 40 x 23 cm Dimensions: 1000 x 700 x 1050 mm, WxDxH Consumption machine We carry a wide range of bread slicers!

(3) Mikrosa SASL 5 CNC (size similar to Kronos M, MX, L) CNC overhaul and retrofit in progress full overhaul and CNC retrofit (pending) komplett Ueberholung + CNC retrofit Grinding wheel 500mm wide x 610mm dia. CNC 5 axis / 5 axis Mikrosa SASL 5 CNC complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul Elimination of hydraulic movements Application CNC Siemens 840D 5 axes controlled in position with digital brushless motors: - Operating wheel axis motor with optical scale - 4 dressing axes: 2 on the grinding wheel, 2 on the regulating wheel - rotating axis with adjustable speed motor on regulating wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to adjust RPM / peripheral speed (m/sec) Set-up for through-feed grinding and still customizable according to custome ...

Resistance annealing machine This machine anneals (thermally straightens) stainless steel wires from 0.30 - 0.50mm). FUNCTIONAL DESCRIPTION: - The machine enables heating by direct passage of electric current through the wire through the wire (resistance annealing process). The device is equipped with 4 special power stabilisers for regulation, in combination with an optical pyrometer for temperature control and thermoregulation. - The simultaneous heating of the 4 wires takes place in a chamber saturated with inert gas by the electrical contact transmitted by two conductive V-shaped discs (short-circuit rollers). are transmitted. Two further V-shaped discs have the task of guiding the wires. - The system can be integrated into an existing automatic Scholl disc system, which, however, is not not included in the scope of delivery of the machine. Alternatively, the straightened  ...

2003 Reichenbacher Eco 1419 B CNC portal milling machine Year of construction 2003 Number of spindles: 8 drilling spindles Tool places: 12 Speed range: 1500-24000 rpm Find more here - / Contact us at -

The Test Research Inc. (TRI) TR7550, introduced around 2010, is an Automated Optical Inspection (AOI) system designed for high-speed, inline inspection of printed circuit boards (PCBs) in electronics manufacturing. It utilizes a top-view 3-CCD color camera and four angled cameras to optimize test coverage, employing TRI´s dynamic imaging technology to minimize vibrations and provide accurate, stable inspections before and after reflow soldering processes. Key features of the TR7550 include: - High-Speed Inline Color AOI: Ensures comprehensive inspection coverage. - Precise 3-CCD Color Camera: Capable of inspecting 01005 fine-pitch components. - Advanced RGB+W Lighting System: Enhances detection of solder and markings. - Linear Motor X-Y Table: Provides vibration-free, accurate inspection. The system is suitable for inspecting various component defects such as missing components, tomb ...

Erika Record Gr. 7 20 pcs dough dividing and knitting machine Year:2017 - Manufacturer: Erika Record Karl Schmidt GmbH - Semi-automatic roll press - To share and make an impact - Weight range: 70gram to 160gram - Type: 7 20 pcs - 20 pieces - 400 Volt 0.75kW 50Hz - Year of construction 2017

power capacity: kW volt: V ampere: A total power requirement: kW weight of the machine ca.: 22 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Reiden Model: BFSH Condition: used Type of Machine: Horizontal Bed-Type Milling Machine Plate Size: 3200 × 1000 Table Size: 1000 × 1000 Control System: Heidenhain TNC 1550 Spindle Hub: 350 × 350 Tool Holder Spaces: 130 Travel (X, Y, Z): 3000 × 1000 × 800 Max Weight: 5000 kg Find more here - / Contact us at -

power capacity: kW volt: V ampere: A total power requirement: kW weight of the machine ca.: 10 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: kW volt: V ampere: A total power requirement: kW weight of the machine ca.: 22 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: kW volt: V ampere: A total power requirement: kW weight of the machine ca.: 24 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: kW volt: V ampere: A total power requirement: kW weight of the machine ca.: 17 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: kW volt: V ampere: A total power requirement: kW weight of the machine ca.: 24 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: kW volt: V ampere: A total power requirement: kW weight of the machine ca.: 18 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 - 800 mm y-travel: 200 - 400 mm z-travel: 200 - 400 mm total power requirement: 3 kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m Short-term free from current operational resolution Untested, wear and tear due to age and use Price EXW / ex foundation Machine package 3 x Bridgeport 1 x Bridgeport design 1 x Kunzmann 2 x Fritz Werner 1 x DETOMBAY 2 x Reckermann The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine name: Inversion system for liquid polymers Manufacturer: Reiflock Type: Reifomat 500 Year of Make: 1999 Conveying / Dosing of: Liquid Polymers Capacity: Polymer flow: 0.12 - 2.5 l/min. Water flow: 40 - 160 l/min. Dimensions: L 1000 x W 750 x H 1500 mm Curb weight: Approx. 120 kg 2Ygvwomvc Tech. Documentation: Yes Note: Achievable flocculant concentration: 0.07 – 2.5 % Electrical connection: 380 V / 16 A connected load: approx. 2.2 kW Condition: Used Price: On request

Wärtsila Lips Drunen LMP REV 1 LMP REV 1 23456789 4306590023 Wärtsila Art No.: W006927795

power capacity: kW volt: V ampere: A total power requirement: kW weight of the machine ca.: 19 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kitzinger Dishwasher Type Contino 800 Q BS3 REKU Year of Make: 2012 Noise exposure 85 dB (A) Output approx. 800 baskets/planks per hour possible Electr. Connected load: approx. 100 KW Washing temperature approx. 50°C Rinse temperature approx. 80°C Fresh water consumption: approx. 400 l/hour Tank volume approx. 1500 litres (pre-wash and main wash tank) Blow-off from 3 sides with 3 motors Max. throughput dimensions crates: 400mm high x 650mm wide Max. throughput dimensions of sheets/planks (portrait): 440mm high x 60mm wide Dimensions approx. LxWxH: 12,000mm x 2,200mm x 2,700mm Weight: approx. 1,500 kg - immediately available from STOCK

power capacity: 14,5 Nm volt: 0 V ampere: 24,1 A total power requirement: kW weight of the machine ca.: 19 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rego Herlitzius Type: Rotec 350 Circular knife Year of construction 2010 Cutting width: 3 – 25mm completely made of stainless steel for loaves max 3250mm length on casters tested and cleaned Stock level: 2 pieces

Inv. Num. : 8161 Type: RSO 32 Producer: Reinhardt Created: 2008 Parameters: The machine is in good condition.

Brand: RENZ Model: inline 60-500cm format Maximum speed: 2200 punching cycles per hour and 1700 binding cycles per hour Dimensions: 5900x2400 cm with hinge Gross weight: 3400 kg supplied with 2 modules: RENZ ASM500 and RENZ ABL500 lit up during the inventory.

Low-maintenance BATES robot palletizing cell for bags: + Take-off belt with square rollers, new + FANUC robot incl. control cabinet and teach pendant, overhauled + Platform for robots, new + Gripper for bags, new + Security fence incl. light barrier, new + 1 or 2 full pallet spaces + Bag dimensions/sizes e.g. flour 10.0 kg - 50.0 kg + Standard pallet sizes + Turnkey from the workshop + CE + Warranty Options: o Bag transport o Empty pallet magazine o Pallet transport o Grippers for pallets, cartons, crates, packages, buckets, hobbocks, etc. o Assembly o Commissioning

1 Deck Resonance Screening Machine - Workshop overhauled and tested

Resonance screening machine / feed chute with perforated sieve Workshop overhauled and tested

Inv. Num. : 8195 Type: AR35 Type 11 Producer: Reform Created: 1998 Parameters: Control system: Sinumeric 805 Magnet: 3500 x 700 mm Machine height: 3000 mm Machine length: 8800 mm Machine width: 2250 mm Machine weight: 28000 kg

x-axis: 10.100 (2x 5.000) mm y-axis: 3.000 mm z-axis: 1.500 mm Control: Sinumerik 840 D Siemens distance between columns: max. 3.000 mm passage: max. 1.950 mm distance spindle center to table: max. 1.800 mm distance spindle nose and table: 1.350 / 1.500 mm Main spindle:: type: P 8005020/00-4 turning speed range - main spindle: max. 18.000 min/-1 power capacity - main spindel: 20 kW max. Torque: 48 Nm tool taper: HSK-A63 DIN 69063 Spindle Extension: 450 mm swivellable: B: +110° / -10 ° rotatable: C: +/- 200 ° Main spindle:: type: P 8002320/00-4 turning speed range - main spindle: 20 - 5.000 min/-1 power capacity - main spindel: 40 kW max. Torque: 1.100 Nm tool taper: HSK-A100 DIN 69063 Spindle Extension: 300 mm swivellable: B: +110° / -10 ° rotatable: C: +/- 200 ° work table:: table surface area: 4.000 x 2.200 (2x) mm max. table load: 12 / 20 t height over floor: 700 mm number of ...

The Bosch Rexroth AA4VG71EP4D1/32R-NSF52F011DP-S (R902232818) is a high-pressure axial piston pump designed for closed circuit applications. This particular model features an integrated boost pump that serves the dual purpose of providing boost and pilot oil supply, ensuring consistent and reliable performance. The swashplate design allows for the smooth change of flow direction as it moves through the neutral position, which is essential for precise control in various applications. This pump is equipped with high-pressure relief valves that incorporate a boost function, enhancing its safety and efficiency. Additionally, it comes with an adjustable pressure cutoff as standard, offering customization according to specific system requirements. The inclusion of a boost pressure relief valve further contributes to its operational safety. Bosch Rexroth has designed this model to be versatile, ...

Rexroth D-89275 Elchingen TYP: A4VG125DA2DA/32R-NTF02F071DP MNR: R902198125 SN: 93991682 FD: 23W03 n=2300min P=94,0 kw Made in Germany

CNC Lathe REALMECA type T400 Travel X: 200 mm Travel Z: 600 mm Numerical Command: NUM 750 Between points distance: 700 mm Max machining diameter: Ø 210 mm Spindle speed: from 100 to 4000 RPM 12 tools Turret VDI 20 3-jaws chuck Ø 140 mm Year of construction: 1993 Spindle motor: FANUC Tailstock: CM4 Hydraulic Tailstock + Chuck Lubrification Voltage: 380 V Dimensions (L x W x H): 2500 x 1500 x 1700 mm Weight: approx 3 T

x-travel: 2000 mm y-travel: 1000 mm z-travel: 1000 mm Control: Heidenhain type: TNC 430 : spindle turning speed range: 15-1450 U/min Table area: 2300x1200 mm Spindle: 200 mm spindle stroke: 200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Nr 3762 Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data of the box rack: Shelving system: Stow Type: Midirack Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 1,910 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x Shelf stand, used Material colour: sendzimir galvanised Column profile dimensions: 55 x 45 x 1.5 mm incl. cross and diagonal struts, Footplates The stands are pre-assembled 2,000 mm high 600 mm deep 10x Shelf trusses, used Material color: white Z-profile: 77 x 32 mm Weight | Pcs.: approx. 3.95 kg Clasp: 2 HK (hooks) Clear width: 1,800 mm 20x Locking pins, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting 05x Particleboard, used Thickness: 38 mm Width: approx. 1,800 mm Depth: approx. 600 mm Surface: coated if necessary (possibly in two parts) 20 ...

Technical data of the box rack: Shelving system: Stow Type: Midirack Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 2,810 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x Shelf stand, used Material colour: sendzimir galvanised Column profile dimensions: 55 x 45 x 1.5 mm incl. cross and diagonal struts, Footplates The stands are pre-assembled 2,000 mm high 600 mm deep 08x Shelf trusses, used Material colour: yellow Z-profile: 74 x 30 mm Clasp: 2 HK (hooks) Clear width: 2,700 mm 16x Safety pins, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting 04x Particleboard, used Thickness: 38 mm Width: approx. 1,800 mm Depth: approx. 600 mm Surface: coated if necessary (possibly in two parts) 24x Folding box, used Manufactur ...

Technical specification, ZZS A1, FEATURE VALUE, POWER 17 KW, LENGTH 2000mm, WIDTH 1250mm, HEIGHT 4180mm, WEIGHT 700kg, zigzag separator, The Zig Zag Separator works based on weight differences. This highly efficient separator uses airflow to separate materials by weight. The zigzag design extends the falling path of the materials, providing a more homogeneous and accurate separation process. It is ideal for separating materials such as plastics and light metals from scrap metal. Our machine is designed to be integrated into production lines and offers maximum performance with low energy consumption. In addition, its compact design allows it to operate in a minimal space. The Zig Zag Separator offers an environmentally friendly solution with high efficiency and low running costs that optimizes your recycling process.

Technical specification, FGR S1 FGR M1 FGR L1, FEATURE VALUE FEATURE VALUE FEATURE VALUE, POWER 15 KW POWER 30 KW POWER 45 KW, ROTOR DIAMETER 350 mm ROTOR DIAMETER 350 mm ROTOR DIAMETER 350 mm, ROTOR LENGTH 400 mm ROTOR LENGTH 800 mm ROTOR LENGTH 1200 mm, BLADE 7+2 BLADE 14+4 BLADE 21+6, LENGTH 800mm LENGTH 1200mm LENGTH 1600mm, WIDTH 1400mm WIDTH 1480mm WIDTH 1580mm, HEIGHT 2000mm HEIGHT 2000mm HEIGHT 2000mm, fine mills, Mizar Machines mills offer high performance in industrial waste processing and recycling processes. These mills are designed for efficient grinding and granulation of various materials. With their superior crushing capacity and fast processing times, they can effectively process even challenging materials such as metal cables, plastics and electronic waste. The use of durable materials and wear-resistant blades ensures long-lasting and reliable performance. By prioritiz ...

conveyor belt, The conveyor belt is an important piece of equipment in various industrial applications, designed to efficiently transport materials through different stages of production and processing. Thanks to its robust construction and customizable design, this conveyor system can transport a wide range of materials, from bulk materials to packaged products., With adjustable speed settings and multiple width options, the conveyor can be customized to meet specific operational requirements. Smooth and continuous operation minimizes product damage and ensures safe and efficient material transport. In addition, the modular design allows for easy integration into existing production lines, improving the overall workflow., Safety is a priority, and the conveyor is equipped with features such as emergency stop buttons and guards to ensure a safe working environment, making it an ideal sol ...

VA-10. Residual Gas Compression/Separation Stages (V 671A/B, B670) 3-stage complete system, Type SN, Built: 1990 Incl. necessary equipment, functional, part of the overall system Residual gas compression consisting of pulsation damper B674, separator B670, Tank B673, heat exchanger W672, filter B679, slop tank B675, Gas/liquid separator B661, pipelines Manufacturer: Andreas Hofer Hochdrucktechnik GmbH Technical Data: Steel sheet construction, BMG 5709/968; Find more here - / Contact us at -

table length: 2000 mm table width: 1000 mm stroke height: 400 - 1010 mm weight max. in kg: 300 kg weight of the machine ca.: 220 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical Specification, Will be added soon, magnetic drum separators, Mizars semi-magnetic drum separators offer ideal solutions for separating ferrous metals from bulk materials and transported products. The MDS series is easy to operate and maintain and offers energy efficiency with low running costs.

Technical data for the wide-span rack: Shelving system: Stow Type: Midirack Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 2,810 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x Shelf stand, used Material colour: sendzimir galvanised Column profile dimensions: 55 x 45 x 1.5 mm incl. cross and diagonal struts, Footplates The stands are pre-assembled 2,000 mm high 600 mm deep 10x Shelf trusses, used Material colour: yellow Z-profile: 74 x 30 mm Clasp: 2 HK (hooks) Clear width: 2,700 mm 20x Locking pins, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting 05x Particleboard, used Thickness: 38 mm Width: approx. 1,800 mm Depth: approx. 600 mm Surface: coated if necessary (possibly in two parts) Your contact persons in o ...

Technical specification, Will be added soon, Overband magnetic separator, Magnetic blocks are designed to effectively remove unwanted metals such as iron and steel prior to the granulation process. They attract and remove metal particles as the materials pass underneath, maintaining product purity and protecting machinery from ferrous residue. Mizars OMS series magnetic separators offer durability and high performance in continuous operation, providing a reliable solution for industry.

Qty. 1 Second-hand extrusion press line – in storage – never installed! Mfc.: Korean Manufacturer Force: 1650 UST Built: 2024 Type: Direct Single Action Horizontal Short Stroke Back Loading Aluminum Hydraulic: Rexroth PLC: Mitsubishi Diameter of billet: 152 mm (6 inch) Length: 400 – 750 mm Size of container: Φ157 mm × 800 mm Size of exit hole: Φ180 × 250 mm Container Size Inner Dia.: 164 mm (6˝) Length: 700 mm Main Ram Stroke: 1200 mm Scope of supply: Loading Lift System Billet Pushing Induction heating Furnace Billet Conveyor for Discharge Billet Feeding into Press Cooling System Hot Saw Run-out Table Double Puller Stretcher Finishing Saw Dies Furnace Aging Furnace

bore capacity in steel (diameter): 50 mm throat: 365 mm bore stroke: 230 mm spindle diameter: 60 mm spindle taper: MK 4 spindle turning speed range: 54 - 1032 U/min no. of turning speeds: 9 Stufen feeds: mm/U table surface area: 620 x 520 mm total power requirement: 3,5 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,2 x 0,8 x 2,45 m Pillar drill with - Left/right rotation - Machine light - Coolant - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data for the wide-span rack: Shelving system: Stow Type: Midirack Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 1,910 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x Shelf stand, used Material colour: sendzimir galvanised Column profile dimensions: 55 x 45 x 1.5 mm incl. cross and diagonal struts, Footplates The stands are pre-assembled 2,000 mm high 600 mm deep 10x Shelf trusses, used Material color: white Z-profile: 77 x 32 mm Weight | Pcs.: approx. 3.95 kg Clasp: 2 HK (hooks) Clear width: 1,800 mm 20x Locking pins, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting 05x Particleboard, used Thickness: 38 mm Width: approx. 1,800 mm Depth: approx. 600 mm Surface: coated if necessary (possibly in two parts ...

Bosch Rexroth workstation 4800 x 700 x 880 mm 2 x Bosch Rexroth worktop 2400 x 700 x 40 mm Worktops with hard laminate coating suitable for high mechanical stress on the tabletop surface \u2012 Very abrasion-resistant – High impact resistance and scratch resistance – Resistant to organic solvents, weak acids and alkalis, gasoline and oil – Short-term resistant up to 180 °C 3 x Lista Drawer Cabinet Number of drawers: 5 1 x 50, 2 x 100, 1 x 150, 1 x 300 mm Width outside: 560 mm Depth outside: 720 mm Exterior height: 840 mm More items - new and used - can be found in our shop! International shipping costs on request!

Stirring Machine/Stop Machine for approx. 40l Stirring and beating selectable Speed and deflection infinitely adjustable with digital control incl. whisk coarse and fine incl. 3 boilers

Used cable pelletizing system for mixed and stranded cables. The machine has been overhauled and equipped with new tools. The turbine was re-mounted and the control panel was replaced. In addition, the material inlet control has been activated so that the machine can be used automatically. The hourly output depends on the cable up to approx. 250 kg/hour when using a 5 mm sieve insert. The attached video shows the system in combination with the dosing tank and plastic loading. These components can be supplied as an option. It is operated via a 63 amp connection at 400 V. The power consumption is 28 kW. The plant can be visited and tested at our premises. More information at infoRecyclinganlagen.info