re cutting used for sale

Ring bending machine, profile bending machine, three-roll bending machine, bending machine -Outer diameter: 200 mm -for: 35 mm pipe -Bearing seat: Ø 55 mm -Bore: Ø 49 mm -Quantity: 2 rolls available Price: complete -Dimensions: Ø 200 x 81 mm -Weight: 11 kg

Respiratory protection filters -Art. No.: 500 01 67 A2B2-P3 -Price: per piece -Quantity: 8 pieces -Weight: 0.5 kg/piece

Respiratory protection filter -PAPR-A1B1E1P3 -Price: per piece -Number: 2 pieces -Minimum purchase: complete -Weight: 0.2 kg/piece

Load resistance -Load resistance for: bridge cranes -Serial number/picking number: 2089442-1 -Weight: 340 kg

Diesel particle filter cleaner, diesel particle cleaner, particle cleaner, particle filter -Air heater: Leister type 8D5 -Power: Air heater 5000 1x380-440V~ 7500-10000W max.23A -Side channel compressor -Quantity: 2 pieces of soot filter regenerator available -Price: piece

Braking resistor, charging resistor, damping resistor, filter resistor -Manufacturer: SEW Eurodrive -Type: BW017-024-02 -Item no.: 17962218 -Power: 1.44 kW -Number: 3x resistors available -Price: per piece -Dimensions: 550/330/H150 mm -Weight: 10.5 kg

Refrigerant recovery system, vacuum pump for air conditioners, air conditioners, refrigeration units, differential pressure gauge -For use in: air conditioning systems with recovery, CFC, HFC and HCFC -Dimensions: 300/400/H320 mm -Weight: 19kg

Evaporator power: 2x21 kW, each approx. 29 kg, filled with nitrogen, designed for railway technology, packed in welding foil, 2 pieces per pallet each approx. 129/66/40 cm,

Mercury relay, mercury switch -Type: STR1 -Quantity: 12 pieces available -Price per piece -Weight: 0.17 kg/piece

PTC thermistor relay, contactor, semiconductor contactor, contactor -Type: PLC-BSC-24DC/21-21 -Number: 10x relays available -Price: per piece -Weight: 0.07 kg

condenser, condenser, each approx. 158/30/56 cm, 31.1 kW, approx. 33 kg each, filled with nitrogen, designed for railway technology, packed in welding foil, 4 pieces per pallet

2X RESERVE KNIFE FOR POLAR 55 EM Format (cm): 55

Resistor module, switchgear, switching components -Manufacturer: Wieland, resistance module -Type: ME3696S -Number: 2x module available -Dimensions: 95/50/H75 mm -Weight: 0.15 kg

Braking resistor, charging resistor, damping resistor, filter resistor -Watt: 150 W -Ohm: 100 ohms -Number: 3x available -Price: per piece -Dimensions: 240/80/H95 mm -Weight: 0.9 kg

Reflection light barrier, reflection light scanner, light barrier, light scanner -Manufacturer: Sick, retro-reflective sensor type WT45-P660 -Connector: DC 10-60V -Number: 2x sensors available -Price per piece -Total dimensions: 105/60/H180 mm / 170/90/H110 mm -Weight: 0.7/0.8 kg/pc.

Monitoring module, safety module, controller, safety relay, relay -Manufacturer:Telemecanique, safety relay -Type: XPS-AL/SerieB -XPSAL5110 -Snap fastening on: 35 mm standard rail -Price per piece -Number: 6x available -Weight: 0.2 kg

Inserts, hand reamers, reamer, reaming tool, fitting knife cutting set -Type: SP-AZ93R6 -Dimensions: 22x7x3 mm -Inserts: for reamers -Number: 11 packages available -Price: per piece

Lean emission controller for gas engines with cogeneration units, Motortech EMCon5 for sale, with original packaging

Gas mixture regulator, Woodward 8442-1005 for sale, with original packaging

Compressor, compressor make Dorin, type H1502CS/LIE, 56.8 cbm/h, NEW

Used glass lined reactor De Dietrich BE4000. New 1994. Max working pressure: 8bar Air quality delivered to the machine: lack of moisture, pollution

1 used BIBKO RAM 16, built in 1996. without control and in need of rep., from stock, immediately available, free loading

Motor protection relays, relays, heating current monitoring, pre-heating for generators, contactor, semiconductor contactor, contactor -Type: 3UN62-00-2H -Price: per piece -Number: 1x available -Weight: 0.8 kg

Motor protection relays, relays, heating current monitoring, pre-heating for generators, contactor, semiconductor contactor, contactor -Type: 3UA60 00-2X -Price: per piece -Number: 1x available -Weight: 0.8 kg

Snowblower Westa Demonstration unit Hydraulic drive 3 point mount - hydraulically swivelling Pipe Hydraulic Adjustment Weight 615 kg Bolt bottom 28 mm Bolt top 25 mm

moving point, moving center point, moving Morse taper, moving -Center point: 60 mm -barrel tip: shaft-mounted -Recording: MK6 -Number: 1x tips available -Price: per piece -Weight: 16 kg

moving point, moving center point, moving Morse taper, moving -Center point: 40 mm -barrel tip: shaft-mounted -Recording: MK5 -Number: 2x tips available -Price: per piece -Weight: 4.7 kg

Thermo Relief Machine, 15 ́

The scope of delivery includes: 01x Rear wall grille, used Material color: similar. beige overall width: approx. 1,200 mm total height: approx. 1,100 mm Mesh size (outer): approx. 93 x 53 mm Mesh size (inside): approx. 88 x 48 mm Frame profile dimensions: L-profile 30 x 30 mm The rear wall grilles are rusted, partially the frame profile is damaged, see pictures.

moving point, moving center point, moving Morse taper, moving -Center point: 50-85 mm -barrel tip: shaft-mounted -Recording: MK5 -Weight: 5.4 kg

All-in-One Snow shovel, sweeper, screw conveyor Drive via PTO shaft 3 DW hydraulic units Width 2.40 m Lights Good condition, little run

Manual trolley, trolley, crane trolley, trolley drive, crane drive, crane trolley, trolley -Reel for: crane chassis -Drawing with the photos -Chain length: 3600 mm -Quantity: 1x reel available -Price: per piece -Dimensions: 710/250/H220 mm -Weight: 19 kg

moving point, moving center point, moving Morse taper, moving -Center point: 75/250 mm -barrel tip: shaft-mounted -Recording: MK7 -Weight: 34 kg

Quick clamping device, quick release, quick clamping vice, drilling device, machine vice, drill vice, clamping sleeve, collet -pneumatic collet -Built-in collet: Ø 34 mm -Assembly height without pneumatic cylinder: 208 mm -Dimensions: 410/200/H530 mm -Weight: 34 kg

Tecna 3484 Universal spot welding system 8 kVA Universal welding station 8 kVA, hand-operated gun, double program. Simultaneous connection of two tools with automatic recall of the corresponding welding program, which saves time and avoids errors in terms of a simple and safe workflow. Body repairs: resistance spot welding of sheet metal, smoothing with dent spotter (nails and washers), local heating (carbon electrode), screw and rivet welding, denting of stainless steel sheet. Synchronous SCR welding control, adjustment of welding time in cycles and pulses, adjustment of welding current and compensation function. Power supply: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50 %DC: 8 kVA Max. welding power: 35 kVA Max. secondary current: 6.4 kA Heat flow 100 %: 0.88 kA Year: 2014 Weight: 85 kg More items - new and used - can be found in our shop! Interna ...

1X RESERVE KNIFE FOR POLAR 80 EL Format (cm): 80

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Adjustment: SK50 -Tool holder: M20 -Price: for both recordings -Weight: 16 kg

Machine controller, Electronically controlled drives with mechanical governor, EGB Electronically Controlled Actuators with Mechanical Governor Backup -Manufacturer: Woodward Governor -Type: A 8240-007 -Quantity: 1 piece available -Dimensions: 220/140/H150 mm -Weight: 9kg

Alternator regulator -Manufacturer: Bosch -Type: 0190113 004 850 -Number: 1x controller available -Price: per piece -Weight: 1.6 kg

Loipfinger FLM3C cylinder mower for front mounting, 3-fold sports cutter 6-blade, working width approx. 2.10 m, three-point attachment Cat.I (removable) or coupling triangle. With StVZO equipment, turn signals and marker lights. Mowing spindles can be switched forward and reverse.1 Hydraulic connection ew required for spindle excavation, adjustable lowering throttle valve available. Note: Mounted at the rear only for test operation, the mower belongs to the front. Price on request. Further mowing technology in stock. An appointment is required for viewing!

Alternator regulator -Manufacturer: Bosch -Type: 0190 112 006 000 -Number: 5x controllers available -Price: per piece -Weight: 2.4 kg

Refrigeration system with 2 compressors / refrigeration circuits. This plant is intended for larger areas. all information can be seen on the last pictures.

Refrigeration system with a fan Year of construction: 1993 Power : 2,2KW Capacity : 41,6 dm³ further information can be found on the type plate

refrigeration system with a fan Year of construction :1990 Power : 1,1kW Voltage : 220/380 V 50Hz Amperage : 6.6 /5.8 V For further information, please refer to the type plate

Refrigeration system from Vektor with 2 fans Year of manufacture : 1996 at the moment unfortunately no further information about the product

Refrigeration system with a fan Year of manufacture : 1993 Power : 3,2/2,0 kW Voltage : 380 V 50Hz Amperage : 6.4 / 3.7A Capacity : 41,5 dm³

Pressure regulator intermediate plate -Manufacturer: Festo -Type: LR-ZP-AD-2 -From: 0 bar to: 12 bar -Number: 1x valve available -Price: per piece -Dimensions: 250/60/H55 mm -Weight: 1 kg

The scope of delivery includes: 01x Rear wall grille, used Material color: creamy white overall width: approx. 2,200 mm total height: approx. 1,200 mm Mesh size: approx. 60 x 50 mm Frame profile abm. (width): approx. 20 x 20 mm Frame profile abm. (height): approx. 15 x 15 mm Wire thickness: approx. 3.00 mm Weight/ pcs.: approx. 8,14 kg Internal designation: RW-2

The scope of delivery includes: 01x Rear wall grille, used Material color: creamy white overall width: approx. 2,200 mm total height: approx. 1,000 mm Mesh size: approx. 60 x 50 mm Frame profile abm. (width): approx. 20 x 20 mm Frame profile abm. (height): approx. 15 x 15 mm Wire thickness: approx. 3.00 mm Weight/ pcs.: approx. 7,17 kg Internal designation: RW-3

Reflection light barrier, light barrier, reflection light scanner -Number: 1x button available -Price: per piece -Weight: 0.06 kg