re cutting used for sale

Braking resistor, charging resistor, damping resistor, filter resistor -Manufacturer: Lenze, braking resistor -Type: 100 Ohm 0.6 kW -Dimensions: 640/90/H115 mm -Weight: 3.2 kg

Consisting of : - 3 tanks of 18000 litres - 3 tanks of 15300 litres - With walkways - Material: AISI 316 - Square discharge door (bottom) - Motorised mash discharge - Round manhole DN 400 (cylindrical part) - Total emptying: ball valve Ø 40 Friedrich no 2 - Partial drain: ball valve Ø 40 Friedrich no 2 - Taster - Recirculation with ball valve Ø 40 Friedrich no 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with a cylinder-grid fixed inside (to keep the mash cake wet) Dimensions : - 3 tanks 18000 litres: Ø 2000 mm, height 5600 mm - 3 tanks 15300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

For trouble-free operation at high throughput rates of cable recycling systems, a constant and adapted feeding of cold cable material is crucial. So that an employee does not have to constantly check or carry out the material, the use of a dosage makes sense. With a volume of approx. 1.5 m³, this offers a sufficient stock to ensure the independent operation of a plant. The conveying speed is simply regulated by a handwheel on the gearbox and the layer height on the conveyor belt can be adjusted appropriately by a slider.

Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor -Manufacturer: RS/Arcol power resistor HS300 47R J -Type: 136-323 47R J -Power: 300 W -Dimensions: 180/70/H40 mm -Weight: 0.6 kg

Time relay, safety time relay, safety controller -Time relay: pick-up delay -Dold item no.: 0000678 -Dimensions: 170/65/H145 mm -Weight: 0.4 kg

Sensor, write head, read head, read/write head -Manufacturer: Turck Blident, read/write head -Type: TNLR-Q80L400-H1147 -Voltage: 24 VDC -Dimensions: 415/80/H25 mm -Weight: 1.1 kg

Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor, high-current resistor -Manufacturer: Ralakde high current resistor -Type: Test voltage 2.5 kV/34 Ohm/1.3 A -Number: 4x available -Price: per piece -Dimensions: 190/65/H85 mm -Weight: 0.4 kg

Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor, high-current resistor -Manufacturer: Ralakde high current resistor -Type: Test voltage 2.5 kV/34 Ohm/1.3-1,8 A -Number: 2x available -Price: per piece -Dimensions: 190/65/H85 mm -Weight: 0.4 kg

Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor, high-current resistor -Manufacturer: Ifo, 4 pieces EMF 50 6.8 ohms in series -Dimensions: 200/50/H110 mm -Weight: 0.4 kg

Equipment: Code reading system HHS Xtend² for color codes consisting of: • Control unit X-tend² with code reader • Encoder with bracket • Touch screen screen • Folding switch with reading head CT10 • Bobst turntable ejector • Cable set complete for Bobst folding carton gluers

Heavy duty castors, heavy duty wheel, tire, forklift drive wheel -Manufacturer: Jungheinrich, forklift drive wheel -Wheel size: Ø 310 x 105 mm -Pitch circle: Ø 113/18 mm -Weight: 13.2 kg

Safety relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Type: SVS11/R-2-24 V -Allow. Operating temp.: -20/+50 °C -Response time: 50 ms -Obstacle size: Ø 50 mm -Fuse: M400 mA -Weight: 2.1 kg

Relay, contactor, semiconductor contactor, contactor, coupling relay -Manufacturer: Finder, coupling relay -Type: 38.51.0.240.0060 60 volts -Number: 1 boxes with 10 pieces of relays each -Price: per box -Dimension: 65/90/H80 mm -Weight: 0.3 kg/box

Heat exchanger Manufacturer: Fryma Type: SWT-60 No.: M17783 Year of construction: 1998 Maximum throughput: 20 m³/h (water) pressure product space: 4 bar pressure double jacket: 4 bar Power: 15 kW isolated with pressure gauge with temperature gauge with manual LWH: 1600 x 900 x 1800 mm

Heavy duty castors, heavy duty wheel, tire, forklift drive wheel, caster, pallet truck castors -Manufacturer: Wheels-Vogel, heavy-duty bike -Wheel size: Ø 85 x 100 mm -Inside: Ø approx. 25.5 mm -Weight: 1.3 kg

Reactor made of stainless steel with a capacity of 500 liters. Top bottom with manhole of 400 mm diameter with three bolts. Additional inlet of 30 mm diameter. Temperature probe up to 100ºC. Probe to add product during the dispersion. 2 electrical resistances of 400 W. Bottom outlet of 30 mm diameter with ball valve. On 3 legs. General characteristics: Material Stainless steel Technical characteristics: Capacity 500 litros Vessel outside diameter 800 mm Vessel height + funds 1000 mm Motor characteristics: Voltage 220/380 V Power 0.37 kW Rotational speed 655 rpm

Peiseler EW 1000 reversible clamp Manufacturer: Peiseler Type: Reversible clamp Type EW 1000 Year of construction 1971 Face plate D = 1000 mm Clamping table 2500x500 mm Voltage 220 / 380 V Power 3.5 kW Item condition: used, impeccably and top maintained. Action components: Only the Peiseler EW 1000 reversible clamp, without the Webo BR 35 V / 1250 radial drilling machine, this can be purchased individually or as a combined offer in our other auctions. Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us.

Compressor Bitzer Type: 6F-40.2Y-40P Volume: 151.6 m3/h Cooling capacity: 100 kW at - 5°C/40°C, 83kW at -10°C/40°C, 42.7kW at -25°C/40°C Refrigerant: R404A Pieces in stock: 7 Reference number: S 145 Condition: Used in good condition Price on request, We have many other kealte plants and meat and fish processing machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Evaporator Güntner, air cooler with two fans 500mm, 8 mm fins and defrost heater The atomizers are for TK as well as for Plus Grade Refrigerant Freon, all types. Outputs from 15 to 22kW at minus 25°C evaporation, or 25 to 38kW at minus 10°C evaporation. Liter capacity 33.9 liters, 27 liters, 20.7 liters, all with two fans Price on request.

Bock unit SHGZX7/1860-4 L R448A/449A/404A. Cooling unit BOCK for shock freezer, goes up to minus 40°C Price on request

Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Manufacturer: Fronius, remote control RCU5000i Univ.SD -Art.No.: 4,046,098 -Voltage: U1 24 V -Dimensions: 180/260/H50 mm -Weight: 1.5 kg

Power resistor, wire potentiometer, resistor, braking resistor, solid tube resistor -Manufacturer: Frizlen, power resistance -Type: FZDPQ 200x35 -Power: 450 W 4.0 ohms -Dimensions: 250/140/100 mm -Weight: 1.7 kg

Renishaw We’ve got also Renishaw CNC measuring machine on the COORD 3 body. The parameters I will find if you will be interested. Machine is from 2016/17 year, but was not used since 2017. Only service to check and maintain the body.

REF-371 FRATELLI INDELICATO ROTOFINISHER Fruit finisher (pulper and refining machine with adjustable pressing) Manufacturer: Fratelli Indelicato Model: Rotofinisher Applications: Designed to reduce the pulp content in citrus and tropical fruit juice Composed of two sieving bodies Power: 3kW Sieve dimensions: diameter-350mm, length-800mm Overall dimensions: l-1,600mm, w-1,300mm, h-1,700mm

Available in stock 1 x Used Bryan Donkin RMG Gas Pressure Regulator RMG-BD226 (FIG 226 ZSO-ECL). Designed primarily for control of fuel feeds to industrial and commercial burners, heater units, boilers and other items of equipment where an accurate, safe and reliable controlled pressure is required. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Outlet Pressure Range: -3 mbar to 3 mbar Maximum Inlet Pressure: 0.1 bar DN 65 PN 16

Braking resistor, charging resistor, damping resistor, filter resistor for crane systems, bridge crane, gantry crane, power resistor, steel mesh fixed resistor device, steel mesh resistor -Power: 4x5/3/1.29/0.86 kW -Resistance: 4x 33/28/66/100 Ohm -Dimensions: 595/480/H955 mm -Weight: 58 kg

Power resistor, wire potentiometer, resistor, braking resistor -Frizlen power resistor: GWADU 320x80-1.7 -Resistance: 300 W 1.7 ohms -Dimensions: 320/80/H15 mm -Weight: 0.8 kg

Braking resistor, charging resistor, damping resistor, filter resistor -Manufacturer: Siemens, braking resistor -Type: 6SE6400-4BD16-5CA0 -Power: 13 kW -Dimensions: 185/185/H285 mm -Weight: 4.0 kg

1 set of solid carbide valve guide reamers for NEWEN and SERDI machines. Application for processing finishes. Dimensions: 6H7 210 mm total length 7H7 210 mm total length 8H7 210 mm total length 9H7 210 mm total length 10H7 210 mm total length 11H7 230 mm total length Sale preferably as a set Price on request

Power resistor, wire potentiometer, resistor, braking resistor -Frizlen power resistor: GWADU 216x120-20 -Resistance: 300 W 20 ohms -Dimensions: 240/140/60 mm -Weight: 3 kg

Resistance module, switchgear, switching components -Type: ME2676S -Dimensions: 95/50/H75 mm -Weight: 0.15kg

We offer you an add-on snow blower (two-way) from the company Schmidt. - Model VF-Z-55-1-004 - fully functional - Year of construction: 2001 - Total mass 1540 kg - Voltage 24 V - Working area roadways (road and rail (standard gauge: 1435 mm) - Room width 2.40 m - Ejection width 41 cm - Drive via PTO shaft front - suitable for Unimog / road-rail Unimog If you have any further questions, please feel free to contact us or visit us Errors and information Errors excepted! No guarantee or warranty. Prior sale and errors excepted. ANB Handel & Service Inh. M. Schönau Halbmondsweg 399885 Ohrdruf

Solid state relays, switchgear, switching components -Manufacturer: Gavazzi -Type: RAM1A69D100 3 pieces mounted on heat sink -Price: complete -Dimensions: 300/200/H80 mm -Weight: 3.3 kg

PLC control, connection module for digital electronic modules, terminal module, repeater -Manufacturer: Siemens, RS 485 repeater -Type: 6ES7 972-0AA01-OXAO E-Stand:4 -Dimensions: 65/45/H125 mm -Weight: 0.3 kg

Bitzer shock freezer, freezer unit with evaporator and switch box

The scope of delivery includes: 01x rear wall grille, used Material color: sendzimir galvanized Total width: approx. 2,700 mm Total height: approx. 1,500 mm Mesh size: approx. 103 x 53 mm Mesh size (elevation): approx. 53 x 53 mm Frame profile illustration: L approx. 30 x 30 mm Wire thickness: approx. 1.75 mm Hole diameter: approx. 7 mm Hole grid spacing: approx. 25 mm Weight/ pcs.: approx. 10,40 kg

TECHNICAL SPECIFICATIONS Manufacturer: STETTER (Germany) Designation: Concrete recycling plant Type: RA 20 Year of construction: 1994 Normal concrete washout capacity: 20 cbm/h Required rinsing water volume: max. 15 cbm/h grain size: 63 mm Separating cut: 0.20 mm Drive power washing drum: 2 x 4 kW Rinsing water pump washing drum: 2.36 kW SPECIFIC COMMENT - incl. washout pump - Operational and fully functional - Excl. agitators and dirty water pump

Motor protection relays, relays, heating current monitoring, preheating for generators, contactor, semiconductor contactor, contactor -Type: 3RN1011-1BB00 -Price: per piece -Number: 7x available -Weight: 130 g

Motor protection relays, relays, heating current monitoring, preheating for generators, contactor, semiconductor contactor, contactor -Type: 3RN1010-1BB00 -Price: per piece -Number: 12x available -Weight: 130 g

-Release agent spraying system for bread baking tins -Grease baking tins -Grease box moulds

Cable reel, Cable reel, Power cable reel, Cable reel, Workshop reel, Cable drum, Wall cable drum, Workshop cable drum, Wall reel -Cable reel -Drum: Ø 300/160 mm -Weight: 11 kg

Motor protection relays, relays, heating current monitoring, preheating for generators, contactors, semiconductor contactors, contactors -A1-A2 220 V 50-60 Hz -250 VAC 4 A Price: per piece -Quantity: 25x available -Weight: 0.4 kg

Safety relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Type: SVS11/R-2-24 V -Permissible operating temperature: -20/50 °C -Response time: 50 ms -Obstacle size: Ø 50 mm -Fuse: M400 mA -Weight: 2.1 kg

Relays, heating current monitoring, preheating for generators, contactors, semiconductor contactors, contactors -12 V 2x15 A Price: per piece -Number: 96x available Minimum order quantity: 3 pieces -Weight: 0.1 kg

Tool holder, milling holder, milling tool, boring head, spindle tool, reducing sleeves, clip-on holder -Milling mount: mount MK4 -Measures: see pictures -Dimension: Ø 56 x 670 mm -Weight: 7.5 kg

Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder -Milling tool holders: 8 pieces MK4 tool holder -Sizes: see pictures -Price: complete -Box dimensions: 630/330/H60 mm -Weight: 20.5 kg

Cable reel, cable reel, power cable reel, cable reel, workshop reel, cable reel, wall cable reel, workshop cable reel, wall reel -DR Italia: power cable reel -with cable: 7G 1.0 length: 13 m -Dimensions: 340/400/H400 mm -Weight: 15.5 kg

Hose reel, hose unwinder, tank hose reel, wall reel, oil pump, hose reel, automatic hose reel, oil hose reel -Spring-loaded drum -Hose length: 5 m -Dimensions: 500/400/200 mm -Weight: 16 kg

Reciprocating saw, dovetail saw, tiger saw, saber saw -Flex reciprocating saw: SK -Nominal power input: 1200 W -in :suitcase -Dimensions: 610/120/H250 mm -Weight: 5.8 kg

Trailer spreader with wheel drive, stable all-steel construction (mostly galvanized sheets on both sides, primed and painted), net capacity 0.8 m³, spreading material distributor 400mm for spreading widths of 1-6 m with salt (grit 1-4 m), manual spreading pattern adjustment, path-dependent control from 2 - 60 km/h, electrical system 12 volts, digital control panel V-PAD with various displays and setting options (memory card not included) height-adjustable pulling device with overrun brake, towing eye (ball coupling optionally available). Other equipment: protective grille, tarpaulin folding roof, rear siding, operating instructions, quick start instructions, workshop instructions, spare parts lists, connection cable with separation point, etc. The spreader trailer is unused – only soiled by corrosion protection application, last technical inspection until 09-22. Technically almost  ...