re cutting used for sale

Cooling capacity 60 kW, Number of compressors: 1, Refrigeration circuit: 1 Cold water flow: 20°C Cold water return: 15°C at air inlet 42°C, Total water circulation: 12.7 m3/h Tank volume: 330 liters

Residual item material from inventory sale for solar free-surface plant Screws, nuts, cable clips, washers, mid and end terminal profiles Package price

Cooling tower Gohl DT63Z, open system, approx. 600KW recooling capacity, incl. control for desalination and biocide, Bj 2009, good condition,

article nr. : 67347-0101 Control card brake of PT 8 Tetra Pak Pull Tab applicator

Spreading attachment PIETSCH STA 1.7 MW series 2000, capacity 1.7 m3, conveyor belt, tarpaulin folding roof, spreader rubber, drive via vehicle hydraulics, with remote control and support supports. Sale as is or in parts possible.

RMH G 60 New Manufacturer: RMH Roller cutting width: 2000mm Roller cutting height: 1200mm Dimensions ( L x W x H ): 3100 x 1300 x 2500 mm Drive: 11 KW Manual and automatic working procedure Two-handed operating system Cutting force: 2 x 30 cylinders (60 tons cutting force) Total weight: 4200kg

Devillbis Oxigene case. Beauty care and breathing oxigene suply.

with new maintenance

RECON Charging air cooler ready To be delivered also used

Ready to be delivered immediately

Waste separation plant - unpacking plant Food Waste Disposal plant / separation and separation plant for food & industrial waste. The innovative wet-separation plant for the treatment and separation of mixed, packaged and unpackaged waste. This plant is a solution for the settlement of the TA municipal waste of the Waste Disposal Ordinance, which prohibits the disposal/landfilling of untreated, organic, biodegradable municipal waste since 1 June 2005. By processing and separating organic and/or municipal waste, we reduce the pollution and provide a larger volume of high-quality biomass for recycling. If waste has previously been landed untreated, such waste is processed and recycled. The organic components are returned as compost or biomass for the production of renewable energies, which leads to a significant reduction in landfilling and thus the associated methane emission.  ...

Remote-controlled gate loading system H38 For the block-initiating gate incision at high feeds. The gate guide sits in a stationary operating stand with a good overview of the entire cutting system. The machine is in very good condition and can be delivered with new control on request!

Scatterattachment Küpper-Weisser STA 95 – E50H, spreader for trucks with usable volume 5 m3, screw conveyor, hydraulic drive, spreading width 1 to 6 m, with tarpaulin folding roof, all-round warning light, GPS antenna, wind shield, control panel. More scattering and clearing technology available, see photos!

Spreading attachment Schmidt SST 20 – OAXN MITOS, wet salt spreader with conveyor screw. For Unimog, trucks with municipal hydraulics. Content 2 m3, Sole 860 ltr.. Equipment with tarpaulin folding roof, storage stand, height-adjustable, remote control, Optional PTO pump and hydraulic oil tank available. More winter service technology available - see example photos!

Mini roller cutter Our range now also includes machines for processing residual rolls, for example from paper production, the packaging industry, printing houses, textiles, aluminium rolls, film rolls, etc. These heavy rollers cannot be processed efficiently and safely with the normal cutting systems, but with these special "guillotine" roller cutters this is no longer a problem. The mini roller cutter can be seen here as a standard version. We offer the Mini roller cutter in version G20 / 25 and G30. All data can be customized according to the customer's wishes. (Sensors | Protective grille | Light barriers | colour, etc.) Roll width: max. 700 mm Roller height: max. 800 mm Drive: 5.5 Kw Cutting force: 25 T cylinders Weight: 1200 kg Working cycle: 65 seconds Including automatic return: Important roll cutting width and roll cutting height can be adjusted as desired. Dep ...

Replacement columns for die-casting machine OL1500, D250x12, Oleopress, used - overhauled Special price! Attention: The current new price is certainly twice as high. In addition, we also have a new spar nut and 2 adjusting nuts in separate adverts. If you have a VAT number, we will be happy to issue you with an invoice without VAT. Second hand! The part was bought from a spare parts store of a company, it was overhouled by a specialist company, is in a very good condition and fully functional. Attention: We have not cleaned the column yet, as the fat layer is optimal for storage. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 250 x 12mm Thread fixed end 300mm lg Thread adjustable end 1160mm lg Weight approx. 2300 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250 ...

Replacement columns for die-casting machine OL1600, D250x14, Idra, new -50% Special price! Attention: The current new price is certainly twice as high. If you have a VAT number, we will be happy to issue you an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely as new and in the original packaging. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 250 x 14 mm, L 5908 mm, Thread fixed end 290mm lg Thread adjustable end ca. 1160mm lg Weight approx. 2300 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Replacement columns for aluminium die-casting machine OL2000, D285x10, Oleopress, new -50% Special price! Attention: The current new price is certainly twice as high. In addition, we also have a spar nut and 2 adjusting nuts in separate adverts. If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely new and in ist original packaging. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 285 x 10mm, L 6830mm Weight approx. 3400 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Used Siemens exhaust hood / recirculating air filter LF26 for ceiling mounting above cooking islands. Good, technically perfect condition. Siemens recirculating air filter, LF26 • For ceiling mounting above cooking islands. • Glass filter cover. • Indirect lighting: 2 x 6 W • Circulating air dimensions (H x W x D): 24.5 x 120 x 70 cm • Power supply: 230 V, 50/60 Hz • Total connected load: 192 W Operating mode and performance • Max. flow rate: 850 m³/h. • Circulating air capacity: • Max. normal operation: 780 m³/h. • Intensive level: 850 m³/h. • Can only be used for recirculating air operation. • A standard activated carbon filter is required for recirculating air operation (optional accessory). • Extended service life of the activated carbon filter thanks to multiple regenerability. • 2 high-performance blowers. • Noise levels in reci ...

ID3595 Liebherr LH50 M Litr. year/Baujahr 2015 8.900 hours/hours Industrial monoblock boom, straight 9.60 m, industrial stick, stick end sharply angled 7.50 m with hydraulic quick coupler, medium-pressure circuit, grab lines, VarioLiftPlus 2A, active lowering of the lifting cylinder, support: rear and front outriggers, single tires, 16.00-25, protection for piston rods, outriggers and piston rods rear and front, GTS 13 kW generator system, hydraulic, LHC 255 cab elevation, magnet system, push button on the right joystick, various grabs are also available on request Industrial monobloc boom straight 9.60 m, industrial stick, stick end strongly angled 7.50 m with hydraulic quick coupler, medium pressure circuit, grab lines, VarioLiftPlus 2A, lifting cylinder actively lowered, support: claws at the rear and front, single tyres, 16.00-25, protection for piston rods, claws and piston rod ...

With the help of our rental machines, you can bridge the time periods during which there is an increased demand for compressed air. This is useful, for example, in the event of unexpected peaks in demand or the failure of one of your own compressors. The usual high BOGE quality standards also apply to our used rental machines – in addition to various compressors, a wide range of high-performance compressed air components is available for you. Before renting, all machines are carefully reworked and tested – we give you a guarantee for this. Visit the BOGE compressors Used Machinery Shop

Used stainless steel reactor. New 1990. Total capacity 70 L, water jacker capacity 16 L. Pressure: tank 2,5 Bar, jacket 1,5 Bar. Temperature: tank 134°C, jacket 120°C.

bandwidth 90 mm, masses 0.8 x 0.8 x 2.2 m , Btto 320 kg/ pcs

Bosch Turbo Scara SR6 Swivel Arm Robot The SR6/SR8 robot system consists of robust robot mechanics with four freely programmable axes. Thanks to its high speed and load capacity (up to 8 kg), the robot is predestined for assembly work and fast pick & place movements. The turboscara SR6 and SR8 are swivel-arm robots (Scara robots) with four axes and the following advantages: • Minimal cycle time with maximum precision • Large working area and different lifting distances • Defined mechanical interfaces • PC control with a wide range of communication options • Complies with international standards • Brushless drive technology reduces repairs • Integrated user installation, optional: gripper for connecting a tool connector • Integration of safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS program ...

Strip thickness / strip thickness: 3 - 4 mm Coil weight max.: 10,000 kg Coil inner diameter/coil inner-dia.: 508 mm Coil outer diameter / coil outer-dia.: .700 mm Thorn width / mandrel width: 1,650 mm Low-return / pressure arm Separierarm / separating arm Hydr. Spread / hydr. Spreading Working dircetion: right/left; Right/left On board hydraulic pipes 24 VGS or 110 V, 50 Hz. On board hydraulic piping 24 V DC or 110 V, 50 Hz.

2 x Alpha 18 W-S with integrated redundant pump station Standard Hyfra equipment: Frame construction in stainless steel Economical low-noise scroll compressors Pump built into the housing; Attention: Required Inlet pressure: at least 0.05 bar! Machine with control transformer, no neutral conductor necessary Flow monitors Antifreeze monitoring Fault message with digital display Collective fault message, potential-free External power-on Automatic fan switching from low to high speed Highly efficient condenser with Micro Channel technology Non-cleanable flap evaporators for water Extras: Cooling capacity approx. 25kW at +13°C tank temperature and ambient temperature of +32°C Medium: Water Water-bearing pipes insulated Radiator designed according to the current ECO Design guideline 2021 (adapted compressor, condenser, evaporator) Housing LxWxH 1640 x 71 ...

Technical data : Bandwidth / strip width 1,350 mm Strip thickness / strip thickness 0.4 - 4.0 mm Coil weight 10,000 kg Speed / speed 15 m/min. Coil inners / coil inside 508 mm Coil outer / coil outer- x 1,800 mm Distance ground & reel mpine center / Distance bottom and center of reel mandrel 1,200 mm Imposition ratio / reduction ratio 1:2 Low-return / press arm Deportation sign / push-off sign

3x RESERVE KNIFE FOR POLAR 55 EM Format (cm): 55

Format (cm): 76

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 031 P5-NF MTA S.p.A. TAEevo Tech 031 P5-NF are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 115 ltr., built-in P5 high-pressure pump, open expansion tank 14 liters and evaporator as NON FERROUS version. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 8.98 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 1.5 Available pump pressure (bar) 5 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 6.6 Max. Current (A) 12 Starting Current Circuit (A) 47 Protection class: IP54 Dimensions: Length (mm) 1315, Width (mm) 660, Height (mm) 1373, Weight (kg) 331 Co ...

double piston compressor system semi-hermetically air-conditioning compressor Compressor Chiller 2 x 18.5 Kw with frequency inverters 2x Semi-hermetic piston compressor Manufacturer: Bock Type: HGX5/830-4 N°: AM18158A014 & AM37155A014 380/420 V; 50 Hz; 3 ph; 1450 rpm. Displacement: 72.20 m3; 19/25 bar Power with cooling conditions and refrigerant R407C: 39.32 kW Power with cooling conditions and refrigerant R404A: 41.27 kW Power with conditions and refrigerant R134a: 31.45 kW 4x Plate heat exchanger Manufacturer: GEA WTT Gmbh Type: WP7M-120 Y.O.M.: 2006 max. Pressure: 30 Bar Temperature: -195/+195 °C Content Page 1: 13.69 Ltr. Content Page 2: 13.92 Ltr. 2x Liquid collector Cat. 2 Manufacturer: FricoMEC Type: RV-300X606 Volume: 35 Ltr. Pressure max:28 bar Temperature: -10/+120 °C 2x Inverter Manufacturer: Fuji Electric Type: FRN18.5F1S-4E 3ph 380/48 ...

Refrigeration unit, refrigeration system, refrigeration system, cooling compressor, refrigeration compressor used. TEKO TPX2-112 Built in 2011 compressor 2 pieces FRASCOLD Type: S 7 56 Y 56 m3/h each 380 V Dimensions approx. 1600 x 900 x 2000 mm All items are checked for function before delivery, if technically possible ! Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

We offer a WiHA convection refrigerated display case XXL format as a 230V version of the standing module. Description: Snack counter Convection refrigerated display case with recessed cooling tray for cooling. Open on the customer side with air curtain and anti-cough protection, angular glass structure made of insulating glass. The snack counter has 6 glass shelves that are individually illuminated and adjustable in height. The recessed cooling surface is ideal for drinks. Commercial equipment for installation in enclosed spaces (canteens, break rooms, petrol stations, kiosks, school rooms, trade fair presentations. Here you can offer your products in an optimal way to promote sales. (salads, delicatessen, snacks, dairy products, sandwiches and much more) The RRP € 14,000 net: You will receive an invoice with VAT. Condition: Used Metrics: Snack counter floor-stand ...

For the unloading, dosing and pneumatic transportation of different bulk materials like RDF, SRF, wood chips, animal food etc. consisting of: - 1 piece of unloading station with level sensors and volumetric dosing - hydraulics for automated unloading of moving floor trailers - chain conveyor for discharge of the material - rotary valve for pneumatic dosing - blower for pneumatic dosing More information and pictures can be sent on request.

Qty. 1 Second-hand complete 12-Hi reversing cold rolling mill incl. sand blast line Mfc.: Kobelco Type: 12-Hi reversing Built: 1986 Strip width: 900 – 1250 mm Thickness: Entry: 3.2 mm Exit: 0.4 mm Rolling speed: 120/300 m/min.

Tool Revolver 8-speed Mazak Quick Turn 10N Machine used, good condition from assembly of a MAZAK Quick Turn 10N CNC lathe My. 1985 satted with 8 tool-places Turret 290 mm Space requirement LxWxH: 580 x 460 x 380 mm Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8904

Cooling & freezing chamber NN 2900x2200x2500 Type Cooling equipment Height 2500 Width 2200 mm Length 2900 mm

1 piece of factory-new mobile residual concrete recycling plant RECYCLING PLANT for processing fresh concrete surpluses MREC 15 - MOBILE VERSION Manufacturer: RSM Type: MREC 15 Year of construction: factory new Washout capacity approx. 15 m³/h WAM washout screw Separation cut 0.3 mm - 1.00 pieces filling funnel - 1,00 pieces high basin (25m³) - 1,00 pieces intermediate pool (2m³) - 1.00 pieces of waste water mixer with console - 2.00 pieces of submersible sludge pumps - 1.00 pieces submersible pump - 1.00 pieces of control for residual concrete recycling plant - 1.00 pieces of flushing gallows - etc. The final painting is carried out according to customer requirements. Price on request Delivery time: immediately available Offer and prices are purely net from location Intermediate sale reserved, errors and/or misrepresentation reserved,

Process chiller / chiller air-cooled, Type: TAEevo Tech 351 P5-offAD bypass MTA S.p.A. TAEevo Tech 351 P5-offAD Bypass are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Including crank pan heater, electronic expansion valves, phase monitoring, buffer tank 350 liters and built-in P5 high-pressure pump. Extras: - Open filling system/ tank attached - Bypass with manual valve between water inlet and outlet Cooling capacity kW 66 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 11.2 Available pump pressure (bar) 4.68 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 39 Max. Current (A) 68 Starting Current Circuit (A) 213 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 108 ...

Process chiller / chiller air-cooled, Type: TAEevo Tech 602 P3-20 MTA S.p.A. TAEevo Tech 602P3-20 are compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, electronic expansion valve, buffer tank 500 ltr., built-in P3 circulation pump and winter package -20°C (condenser pressure control). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 116 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 19.8 Available pump pressure (bar) 3.37 Ambient temperature °C 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 60.99 Max. current (A) 102.78 Starting Current Circuit (A) 218.51 Protection class: IP54 Dimensions: Length mm 3294, width mm 1255, height mm 2119, Weight kg 1773 Connection Rp 2"  ...

Process chiller / chiller air-cooled, Type: TAEevo Tech 602 P3-20 MTA S.p.A. TAEevo Tech 602P3-20 are compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, electronic expansion valve, buffer tank 500 ltr., built-in P3 circulation pump and winter package -20°C (condenser pressure control). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 116 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 19.8 Available pump pressure (bar) 3.37 Ambient temperature °C 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 60.99 Max. current (A) 102.78 Starting Current Circuit (A) 218.51 Protection class: IP54 Dimensions: Length mm 3294, width mm 1255, height mm 2119, Weight kg 1773 Connection Rp 2" ...

Composite systems Bitzer with original capacitors Deep pond / Normal cooling -3x compressor Bitzer 4JE-13Y-40P -Kaeltepower: 60 kW at -10ºC/40ºC, 26 kW at -25ºC/40ºC -Volume: 3 x 63.5 m3/h -Quantity in stock: 1 piece -Kealtemittel: R134 -With original capacitors -In very good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

SMAG C4R 350 June 1999 Spare parts supplied with the machine: 25 new and used air pressure connectors 5 new control buttons 1 box of 12 used relays 1 box of 12 new relays 4 new aluminum sensor holders plus 7 used ones 6 complete used Keyence for cell adjustment 2 new Keyence cell adjustment 11 bags of screws for adjustments and new cell 1 new INA mandrel holder bearing 4 new mandrel bearing holders 9 boxes of new cell wire 2 used wires 10 different new spare control buttons 7 new J559 belts 5 J864 belts 1 used inverter to be repaired 1 used brake system 1 used joystick Machine equipment: 12 slitting knives 9 slitting blade holders Winding shaft: Ø38-Ø40 -Ø76 Maximum mother reel diameter 650mm Maximum diameter of daughter coil: 350mm

Bartscher refrigerated table 0 °C to 10 °C 1 unit – double benefit: convection cooling ensures a constant and uniform cooling temperature inside the refrigerated table with 1 door and 4 drawers. With its high-quality and robust stainless steel surface, the appliance can be perfectly integrated into any kitchen and can also be used as a work surface. • Number of drawers: 4 • Door hinge: Left • Door Type: Hinged Door(s) • Number of doors: 1 • Number of cabinets: 1 • Cabinets refrigerated: Yes • Drawers refrigerated: Yes • Standard format drawers: 1/1 GN • Connected load: 0.452 kW | 230 V | 50 Hz • Feet height adjustable: Yes • Temperature range: 0 °C to 10 °C • Height adjustable: 850 mm to 900 mm • Backsplash: 50 mm • Cooling: Convection • Refrigerant: R134a • Digital Display: Yes • Depth GN container max.: 150 mm • On/Off S ...

Technical data: Working Width: 1300 mm Maximum Speed: 550 m/min Unwinder Type: Shaftless Maximum Unwinder Roll Diameter: 1000 mm Rewinder Type: Double shaft center driven Maximum Rewinder Roll Diameter: 650 mm Minimum Slit Width: 35 mm / 25 mm (optional) Processed Materials: PP, PET, LDPE, HDPE, PAPER, and laminated materials Knife Types: Blade slitter and rotary knives Control System: Touchscreen HMI with web monitoring and recipe management Additional Features: • Automatic knife positioning system • Shaftless unwinding with hydraulic tilting arms • Laser core guiding for precise and quick setup • Modular design for easy maintenance and access

split chiller, chiller - water-cooled, Type: OCEAN Tech OCTME 230 – 66 kW Manufacturer: MTA S.p.A. OCEAN Tech OCTME 230 are water-cooled chillers for indoor installation in split version (without condenser) without hydraulic circuit (pump, accumulator) incl. crank tray heating, phase monitoring. Cooling capacity kW 66.2 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 11.4 Condensing temperature: 45°C Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 27 Max. current (A) 45 Starting Current Circuit (A) 178 Protection class: IP22 Dimensions: Length mm 1735, width mm 660, height mm 1200 Weight kg 383 Connection cold water G 2" B Refrigerant connection Ø mm: 22 / 28 ODF Serial No.: 2200388958 Year of construction 2022 Condition: Optical 1 , Technically ok (Stock unit, as good as new) Pri ...

Cooling capacity: 3000 kcal/h coolant: dest. Wasser tank: 7,7 l volume capacity: 3 l/min operating pressure: 3,25 bar connected load: 0,5 kVA connected load frequency: 380 V • water circulation for destilled water or for water with anti-freeze and anti-corrosion protection, new-valued, was only used for testing purposes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Composite systems Bitzer with original capacitors Deep pond / Normal cooling -3x compressor Bitzer HSK 7471-90 -KaeltePower: 435 kW at -10ºC/40ºC R404A 280 kW at -20ºC/40ºC R404A -Volume: 3 x 250 m3/h -Quantity in stock: 1 -With original capacitors -In very good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

4X RESERVE KNIFE FOR WOHLENBERG 155 Format (cm): 155 1x brand new / unused

M. No.: 0392 Equipment / Additional information: Feeding width (mm): 500 Kw: 7.5 A: 380