re cutting used for sale

Wire-O closing machine, Width: 700 mm, Power: 380 volts

pressure: 200 t throat: 450 mm stroke: 30 - 140 mm table surface area: 1100 x 850 mm dayligth: 500 mm ram surface: 800 x 600 mm ram adjustment: 110 mm tool hole in ram: Durchm. 65 x Tiefe 105 mm no. of strokes: 45 Hub/min total power requirement: 15 kW weight of the machine ca.: 14,2 t dimensions of machine L x W x H: 3,18 x 2,09 x 3,05 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stroke: 175 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1050 mm y-travel: 560 mm z-travel: 520 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diamter spiral cutter: 70 - 250 mm spiral lenght: 20.000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine for the processing of mixed waste cables, especially with fine conductors and stranded cables, The plant was most recently used for the post-cleaning of residual plastics from other cable recycling plants. Thanks to the rotor system with the 24 knife segments and the large flywheel masses, the system is also suitable for manual operation. The machine has a cooling unit that optimizes the granulator with a flow temperature of 0.5 °C for the use of heat-sensitive cables, such as NYM, etc. The control electronics of the system enable fully automatic operation in a line with pre-shredder, conveyor belt, dosing accumulator, etc. The machine includes several sets of knives and different sieves. In conjunction with a suitable pre-shredder, the system can process up to approx. 250 kg of old cable. The system was completely overhauled by us and equipped with new tools and par ...

Delivery rate 4.61 m³/min at 10 bar Delivery rate 5.23 m³/min at 8 bar Operating pressure 10 bar Nominal power 30.0 KW Operating hours 14,279 Load hours 11,148 Compressed air connection G1 1/4" Sound level 69 dB(A) Space requirement L - 1,400 x W - 830 x H - 1,640 mm Weight approx. 850 kg

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling holder, milling tool, long milling arbor, attachment holder, cutter head holder, cutter head holder -Milling chuck: SK40 chuck, 3 pieces -Type: 40x16x63 TGL 30 1359 -Hole: Ø 16 mm -Dimensions: 203/60/55 mm -Weight: 1.2 kg

ORT RP18B overhauled

Table dimensions: 1300x650 mm Working height: 350 mm 0: . mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Well pump, centrifugal pump, water pump RED JACKET UMP i50S3-S diameter. Ø 120 mm motor: 1.2 kW 220 V

Linear guide rails, roller rail CS REXROTH R180635331 512175403 2 pcs Length: 836 mm New ! Dimensions: 850 x 80 x 40 mm

Hydraulic Power Unit with Tank REXROTH 952563 MPU1-V710-100L/ 00025161+00963916 Pump: PV7-11/06-10RA0MA0-10-A501 P: ca 95 bar Q: ca 11 l/min motor: 3 kW 230 400 V Tank: 50 l used, tested ! Dimensions: 550 x 400 x 1850 mm

Linear guide rails, roller rail CS REXROTH R180635331 512175402 2 pcs Length: 916 mm New ! Dimensions: 930 x 80 x 40 mm

Hydraulic power unit, drive unit REXROTH U 11.0 R 3.8 - 20 P = 150 kp/cm² V = 2.73 cm3 motor: 1.1 KW 220 / 380 V Tank: 20 l used, tested ! Dimensions: 740 x 570 x 430 mm

Linear Carriage, Roller Carriage CS REXROTH R185362210 New ! Dimensions: 310 x 230 x 110 mm

Hydraulic power unit with tank, compact power unit MANNESMANN REXROTH UpA4V-10 / A4.00 - 300MA ( UpA4V-10 / A4.00-300MA ) p max = 200 bar Q = 4.0 l/min motor: 1.6 kW 220 / 380 V New ! Dimensions: 290 x 220 x 330 mm

Linear guide rails, roller rail REXROTH 1580 x 65 x 60 mm ( 1580x65x60mm ) R180760231 New ! Dimensions: 1580 x 65 x 60 mm

Hydraulic power unit with tank REXROTH pump: PV2V3-30/12R1MC-100A1 p max: 100 bar (pump) Qmax: 8,50 bar 5 cm3/U Tank 60 L Motor: 1.5 kW 1400 rpm 220 / 380 V used, tested ! Dimensions: 600 x 520 x 810 mm

Compact module REXROTH STAR STARMATIC CKK 0360-400-00 ( CKK0360-400-00 ) Characteristic length: 1400 mm Total length 1540 mm New ! Dimensions: 2100 x 260 x 200 mm (box)

Hydraulic power unit with radiator and tank REXROTH engine: 5.5 kW 400 V radiator Hydac OKA-R2 S/1.2/8/M engine:0.37 kW Tank: 115 l used ! Dimensions: 1100 x 1000 x 600 mm

Compact Module BOSCH REXROTH Compact Module CKR R055700651 Characteristic length: 1500 mm New ! Dimensions: 1670 x 145 x 95 mm

Hydraulic power unit with filter and tank REXROTH / FMB BLICKLE 120 bar 9 L/min tank 100 L pump pump BUCHER QX22-006R119 Pd 125 bar Vg 006 cm3/U engine: 2,2,000 2 kW 1410 rpm 380 V used, tested ! Dimensions: 1000 x 900 x 1500 mm

Linear guide carriage, roller carriage CS REXROTH R185142210 New ! Dimensions: 185 x 135 x 80 mm

Hydraulic power unit with tank REXROTH pump 1: PV7-17/25-45RE01MC3-08 R900538525 p max: 80 bar ( pump ) pump 2: PV7-16/10-14RE01MC3-16 R900598753 system pressure pressure : max. 70 bar tank: 250 l engine: SIEMENS 1LA7163-4AA91-Z 11 kW 1460 rpm 400 / 690 V 3AC 50 Hz IP55 used, tested ! Dimensions: 1220 x 1000 x 1920 mm