138,027 used machines on RESALE, but how to find them? Machine Search
Cleaner /sole cleaner/ for rubber boots Product Boot cleaner for rubber boots / boots Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone 0048/33 812 58 60
Used gearboxes Reduction 3.895:1 Input shaft counterclockwise Output shaft counterclockwise
1x Linear robot Reis RL80-13 incl. 2 control cabinets absolutely mint condition Year of construction 2009 there are 2 robots on each beam, a two-axis robot and a three-axis robot the system is dismantled, complete with control cabinets the glass gripper and the Zimmermann & Schilp non-contact glass lifting system are not part of the range of products there are 2 of these double robot systems available incl. loading
PackLab WING REPC FWB60 self-adhesive labelling machine for front & back labelling for cylindrical, oval or rectangular shaped bottles, etc., 2 label applicator type M60 DX 250, label speed 60 m/min., outer diameter of the label reel max. 400 mm, core diameter of the label reel 45-75 mm, label carrier tape with a maximun height of 250 mm, label width from 15 up to 480 mm, maximum label height approx. 245 mm, conveyor width 80 mm, top stabelising belt, press-on belt with a height of approx. 110 mm, electrics 400V/50Hz/3PH, machine floor space approx. 4140 x 3000 mm (LxW), machine height approx. 1900 mm, machine net weight approx. 950 kg
Safety controller, safety relays, standard master device -Manufacturer: REER, Standard Master Device, 8 inputs, 2 OSSD pairs (SIL 3) -Type: MOSAIC M1 -Charge: -Number: 1x Relays available -Dimensions: 110/25/H115 mm -Weight: 0.2 kg
CATALOG NO. 7220 TECHNICAL DATA - min – max width of the processed element 20 – 230mm - min – max height of the processed element 8 – 160mm 7 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) vertical right 160mm 5.5kW 5) vertical left 160mm 5.5kW 6) horizontal top 230mm 7.5kW 7) horizontal bottom 230mm 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 10 pulling, toothed and metal input rollers, including 2 double rollers - 3 side pressures from down: - pressure from the side at the insertion - input shaft, toothed, pulling, turning in the lower tabletop - 2 pressure points from the side - grooved top - drawing roller, metal, grooved - drawing roller, metal, smooth - pneumatically adjustable rollers - length of the introductory tab ...
Inv. Num. : 7252 Type: SMX Producer: REXIM Created: 2018 Parameters: Work table length: 1350 mm Work table width: 355 mm Maximum table load (uniform): 600 kg Maximum distance between the spindle and the table: 520 mm
Reimelt Fat Baking Plant/Berlin Plant/Doughnut Plant Type EL 8/2500 Year of construction 2008 Electric heating Manual cloth feeding 8 rows, for products up to 105mm incl. 6 trolleys with sheets and various cloths incl. downstream vaccination station with 4 jam pressure containers incl. steam hood incl. grease level regulator incl. oil tank with heater - Level regulation via weighing incl. extraction hood Bakery condition/immediately available from stock
Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Nucleus, servomotor -Type: NUDrive MP85 10A Bgr2 R Rev2 IP64 -Item No.: DS851028 -Shaft: Ø 14 x 35 mm -Number: 2 servo motors available -Price: per piece -Dimensions: 200/85/H110 mm -Weight: 3.5 kg/pc.
Tip distance approx. 500 mm Tip height above bed 125 mm 16 speeds from 120 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx. 450 kg
Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Nucleus, servomotor -Type: NUDrive MP42 2A Size 42 R Rev.2 IP64 -Item No.: DS421106 -Shaft: Ø 14 x 35 mm -Number: 2 servo motors available -Price: per piece -Dimensions: 134/42/H56 mm -Weight: 0.6 kg/pc.
Lindner Micromat MS 2000 Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: approx. 80 rpm at 50 Hz. Rotor blade: 104 pcs. New Rotor blade shape: 43x43x19.5 mm Infill opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Wiper comb:yes Counter knife: yes Hydraulic power unit: complete Hydraulic cylinder sieve cassette:sieves 50x50 mm Total weight approx. 9.5 t Dimensions LxWxH mm: approx. 4520 x2970 x 2660 mm Viewing and trial run possible by appointment. incl. funnel Shipping time: immediately
Key data: 13 KW
Manufacturer: Rexroth Model No.: MHD112C-035-PG3-BN 4000 min-1 Part No. 294649 IP: 65 13.3 kW 48 kg More engines new and used - you can find them in our shop! International shipping costs on request!
Tires, solid rubber tires, forklift tires, solid rubber bandages, solid rubber elastic bandages -Manufacturer: Renger, Solid rubber tires, solid rubber elastic bandage with steel band, 3 pieces -Tire size: Ø 410 mm -Inner diameter: 305 mm -Delivery/Price: complete -Dimensions: Ø 410 x 130 mm -Weight: 17 kg/pc.
Tires, solid rubber tires, forklift tires, solid rubber bandages, solid rubber elastic bandages -Manufacturer: Renger, solid rubber tires, solid rubber elastic bandage with steel band, 4 pieces -Tire size: Ø 415 mm -Inner diameter: 305 mm -Delivery/Price: complete -Dimensions: Ø 415 x 73 mm -Weight: 10 kg/pc.
Tires, solid rubber tires, forklift tires, solid rubber bandages, solid rubber elastic bandages -Manufacturer: Renger, solid rubber tires, solid rubber elastic band with steel band -Tire size: 85x370x500 -Inner diameter: 370 mm -Quantity: 1 tire available -Dimensions: Ø 500 x 85 mm -Weight: 14 kg
Speedometer unit -Manufacturer: Renault KBA to2): -3004 -Model: Scenic KBA zu3): 575 -Model Type: 1.6 16V ABS: Yes -Transmission Type: Manual -Engine code: K4M 700 -Fuel type: Petrol -Year of manufacture from: 09/1999 Power kW: 79 -Year of manufacture up to: 08/2003 Engine capacity cc: -1598
Speedometer unit -Car: Renault Clio -Year of manufacture: 02/2001 -Part number: 820072506
right-hand wing mirror -Right-hand mechanical exterior mirror -for: Renault Kangoo -No.: 7700354637
Rotary feedthrough, rotary valve, rotary distributor -for hydraulics -Number: 2x large opening -Number: 8x control cable, smaller bore -Dimensions: 350 x 400 mm -Weight: 45 kg
Cross-cut saw, optimisation saw Make: Reinhardt Model: Quickstop QS 160 P Year of construction: 1992
SECOND-HAND WORKING CENTER SCM MOD. RECORD 1 - CE RULES - table mm. 2000X800 - year 1996
Key data: 50 mm, 30
Used extruder in good condition with screw size: diameter 50 mm x 30v grooved intake and degassing zone Type RH 241-1-50-30v with DC drive 30.2 kW Built in 1993 Immediately available without control cabinet With control cabinet 4-6 weeks delivery time
Key data: 35 mm, 25 , 107 U/min
used REIFHÄUSER single screw extruder with screw size: diameter 35mm / 25 ld The extruder is in very good condition Type RT 78-1-35-25 New control cabinet with new motor AC -7,5kW Year of construction 1994 Quickly available
Retigo O2021ic Combi oven 2016, RP series, Stainless combi oven, electric, 59Kw, with steam, with trolley for 20trays, adjustable timer and temperature controls, with two trolleys, 1Ph
Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hassia Redatron FlexiBag 40/25 vertical form, fill & seal machine for pouches with auger dosing, bag size min. 60 x 50 mm (LxW), max. 400 x 260 mm (LxW), filling volume max. 4.4 litre, max. width of the foil reel 540 mm, maximum diameter of the foil reel 600 mm, electrics 3X230/400 V/50 Hz, capacity up to 150 cycles per minute
Planetary mixer Rego PM100 E - Planetary mixer Rego - Type: PM100 E - Power: 11 kW - Volts: 220 / 380 - Amp: 25
Electric surface press REITZ EHSP522 Pressing surface 200200mm Pressure 5 KN / 0.5 tons Suitable for surface bonding of plastics and composites. On request with: - Heating plate and temperature control - Load cells and gauges for use as test press
-6 rows of bread rolls -King Eco Twin -with König Classic Rex head machine -Year of construction 2010
Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.37 kW -Speed: 2900 rpm -Grinding discs: max. Ø 175 mm -Operating voltage: 380 volts -Dimensions: 420/390/H1150 mm -Weight: 65 kg
IBC container agitator 0.75 KW with worm gear motor i = 1 : 10 and inclined blade stirrer 244 mm With truss made of aluminum profiles 45 45 mm. Propulsion: worm gear motor, 3 x 230/400 volts, 2800 rpm, 0.75 kW, IP55, n²=280, Weight approx. 25 kg. Shaft: Precision stainless steel shaft D20, length 1000 mm, diameter 20 mm, material stainless steel 1.4301 Coupling: Rigid coupling made of stainless steel 1.4571 Agitator: Double-bladed inclined blade stirrer, diameter 244mm, material stainless steel 1.4571 Sash adjustable angle
Donut funnel Scoop Scoop Reimelt SKF 5/3300 Fettback -Reimelt Scoop for Reimelt fat baking systems -Type: SKF5/3300 -Three-phase 400V 3N 50Hz -Control voltage: 230 volts -Power consumption: 1kW -Rated current: about 3A -Fuse: 6A -Degree of protection: IP54
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -Replaceable jaws: soft -Weight: 6 kg
Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -Replaceable jaws: soft -Cone mounting: Ø 82 mm -Bolt circle: Ø 105 mm -Weight: 14 kg
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -exciting: centric -Replaceable jaws: soft -Weight: 22 kg
Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 160 mm -exciting: centric -Replaceable jaws: soft -Cone mounting: Ø 105 mm -Bolt circle: Ø 135 mm -Weight: 18 kg
Resato HBU-B160 Gas High Pressure Workshop Testing System The oil and gas industry is all about the extraction of crude oil and natural gas. One of the challenges is to make the best use of the assets to produce more from the available resources. Various high-pressure applications can contribute to this. Pressure tests guarantee the quality and safety of components for oil and gas production. By injecting a chemical liquid, the well is stimulated. With the controller, high-pressure systems control and regulate back pressure and liquids. In this way, oil and gas can be extracted more safely. Manufacturer: Resato HBU Test System Type: HBU-B160 Max. pressure: 200bar Max. Capacity: 1570cc/ Max. pressure: 7 bar 2 x Gas Bottle Cage 3 x gas cylinder trolley Digital control panel is missing More items - new and used - can be found in our shop! International shipping costs on ...
Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -without interchangeable jaws: without -Weight: 4 kg
Hardness testing device, hardness measuring machine, hardness tester, hardness tester -Hardness tester: according to Brinell and Rockwell Accessories are missing and therefore it is sold as defective. -Handover in its current condition as inspected -Dimensions: 600/220/H660 mm -Weight: 92 kg
Semi-automatic drilling device for plastic parts This purely pneumatic drilling device is designed for repeatable drilling of small plastic parts up to approx. 40 x 200 x 40 mm with holes up to 3 mm. Specifications: - Linear axis travel 420 mm - Stroke approx. 30 mm - Height adjustment approx. 100 mm - With 2-hand release - Plexiglass protection on 3 sides - Emergency stop switch - Sturdy, mobile frame made of aluminium profiles - With 4 swivel castors, 2 of them with brakes - Overall dimensions approx. 1000 x 1000 x 1700 mm - Weight approx. 50 kg - With collet for drill bit 1.5 mm Expiration: - Setup: Adjust stop angle to part size - Setup: Alignment of cross table in X and Y - Setup: Set height adjustment to part height - Inserting the part - Triggering via 2-hand button and holding until drilling is completed - Removal of the finished part and placement ...
CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...
CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...
maximum number of results exceeded
please refine your search
