re cutting used for sale

Hydraulic drive with hydro motor Electrical power: 55 kW Hydraulic pump: Manufacturer: MANNESMANN REXROTH Type: A4VSG250E01/10R-PPB10 Hydromortor Manufacturer: RIVA CALZONI Type: MR4500LPITIN1N1 Outlet shaft diameter: 110 mm Shaft length: 185 mm Weight: ~450 kg Overall size (without shaft): diameter: 850 mm height: 600 mm

Electric heating: 28 KW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system Installation dimensions of the machine in cm: Width: 150 Length: 145 Height: 275 Trolley dimensions in cm: 100100200 height Delivery time: 30 working days after advanced payment

pressure: . t table length: . mm table width: . mm total power requirement: . kW weight of the machine ca.: 22 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rehm Thermal Systems Nitrogen-control Reflow Oven Nitrogen Melting Furnace Type: V8.1 Nitro 3.2 B Year of construction: 07/2008 Voltage: 3 x 400 V 50 Hz Power: 76 kW Cooling: 20l/min.; 2 bar min Nitrogen: 20m³/h Exhaust air: 400m³/h Dimensions: approx. 6000 mm x 1500 mm x 1700 mm Functional: not tested Condition: used The technical data can be found in the type plate. The offer includes only the parts shown in the photos. If you have any questions, inquiries or the like, please send us an e-mail.

Double grinding machine / double grinding block make REMA type DS 30/400 AFabr. -No: 02703 with built-in extractionGrinding wheel size 400 x 40 x 127 mmGrinding wheel speed 1450 rpm.Drive power 3 hp - 2.2 kWFlow rate 10 m3Power connection 380 V, 50 HzWeight approx. 240 kgDimensions 960 x 732 x 1188 mmWith- built-in suction- Standard versionused, from an operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double tool grinding machine make REMA type DS 12/250 WFabr. -No: 077030Grinding wheel size: 250 x 40 x 51 mmGrinding wheel speed: 1450 rpm.Table size: 165 x 180 mmDrive power: 0.73 kWDimensions L x W x H: 900 x 800 x 1100 mmWith- wet grinding device- right tiltable table- Underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double grinding block make REMA type DS 30/350 WMash, -No: 02720Grinding wheel speed: 1450 rpm.Slice size: 350 x 40 x 76 mmDrive power: 2.2 kWDimensions approx: 1080 x 600 x 1200 mmWith- Underframe- Cooling device- 2 tiltable tablesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double grinder make REMA type DS 45/500in standard designTechnical specifications:Grinding wheel size: 500 x 60 x 127 mmGrinding wheel speed: 950 rpmDrive power: 3.3 kWDimensions: 1260 x 850 x 950 mmWith- underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Surface Grinding Machine Fabr. REID Type 612 HSerial no. 15279Grinding area: 310 x 155 mmGrinding wheel size max: 200 mmMax. Grinding height: 280 mmMagnetic plate size: 310 x 155 mmGrinding wheel speed: 2800 rpmExternal dimensions: 1100 x 1000 x 2000 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

2-point tool grinding machine make REMA type ST 15/175Machine -No: 037376 built in 1976Technical specifications:Grinding wheel dimensions: 175 x 60 x 51 mmSize of the support table: 365 x 180 mmClamping range of the steel holder up to: 40 mmOscillation length of the grinding wheel: 80 mm2 speeds: 1450/2900 rpm.Drive power: 0.73 / 1.1 kWExternal dimensions approx .: 1400 x 700 x 1600 mmwith- tiltable table- oscillation- coolant pump- Coolant collecting panused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Lapping machine make REMA type SL 07Mash. -No: 069043Grinding wheel size: 125 mmTable size: 340 x 150 mmEngine speed: 2900 rpm.Power: 0.55 kWPower connection: 220V / 50 HzOutside dimensions approx.: 570 x 740 x 1350 mmWith- swinging table. tiltable and tiltable- without basevery little usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Lapping machine make REMA type SL 07Mash. -No: 028038Grinding wheel size: 125 mmTable size: 340 x 150 mmEngine speed: 2900 rpm.Power: 0.55 kWPower connection: 220V / 50 HzOutside dimensions approx.: 570 x 740 x 1350 mmWith- swinging table. tiltable and tiltable- Underframevery little usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC machining center for wood/plastic and composite materialMake REICHENBACHER type Vision - 1, year of construction 1999Technical specifications:Travel X:3740 mmTravel Y:1680 mmTravel Z:340 mmC axis = rotation: +/- 360°Feeds axis speed: 60 m/min.Feed web speed: 85 m/min.Z axis: 20 m/min.C axis:90°/sMilling unit speeds: 1500 - 18000 rpm.Tool holder: SK 40Distance table and spindle min./max.: 80 / 420 mmEnd mill diameter: 24 mmProfile milling cutter diameter: 100 mmTool changer slots:12Tool length max.: 200 mmTool diameter max.: 200 mmTool mass per piece / total: 6 - 50 kgTable size: 3800 x 1500 mmDrive power: 25 kWWeight approx.: 6.5 tWith- Drilling unit spindle speed 4500 rpm., 2.2 kW- Vacuum / grid table- CNC control Siemens 810 D with central unit CCU2 and software module MMC 103- Compressed air requirement 300 - 500 L/min.- Filter systemused, in good conditionPrice on request.Deli ...

Force-measuring dynamic balancing machine make Dr. REUTLINGER type HK 12 LBMachine -No: 5.212.070 built in 1985Technical data:Workpiece weight: 1-100 kgDG 2 and 2.3 x 10 to the power of 6Center height: 340 mmhorizontal adjustment of the recording: 800 mmExternal dimensions approx.: 1800 x 1000 x 1450 mmwith- Measuring device K 2700- Computer MC 100 with screen- removable coverlittle used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tuschier- and test injection press make REIS type TUS 60 A 10 HMachine -No: 177/66, built in 1966Table surface: 590 x 600 mmMax. Shaped area: 600 x 1200 mmMax. Mold height: 680 mmMax. Mold weight: 2.5 tStroke of the table: 500 mmEjector stroke: 200 mmEjector force at 100 atm oil: 2000 kgPressing force infinitely variable: 0 - 10 tControl capacity: 1/100 mmSwing radius of the upper swivel plate: 92 °Stroke speed stepless: 0 - 80 mm / sLoad capacity of the upper swivel plate: 1500 kgLoad capacity of the carriage plate: 2500 kgHeight of the column guide: 245 mmInjection volume: 2.5 lSpec. Spray pressure: 2 - 15 kg / cmDrive power: 5.5 kWHeating power: 1.2 kWAir connection: 2 - 15 atüDimensions L x W x H: 1420 x 1360 2810 mmWeight approx. 2300 kgWith- Test sprayer- Heater- ejector- swivel top plate m. hydr. locklittle usedPrice on request.Delivery: ex warehouse or location free loading tru ...

Spotting Press Fabr. REIS Type TUS 60 OK-40 HWMasch. -No: 693/73 built in 1973Press force: 40 tTable or size of the ram surface: 670 x 470 mmPassage between columns wide / long side: 620/470 mmgr. distance between clamping surface and plunger: 740 mmRam stroke: 770 mmPress speed: 20 mm / sRapid traverse: 50 mm / sOpening speed: 34 mm / sEjector force: 3 tEjector stroke: 200 mmHydraulic drive: 380 V, 9.5 kWSpace required including space for aussfahrb. Table and pestles: 2200 x 1875 x 3000 mmWeight approx: 2400 kgWith- compl. electrical device- Control panel for the electrical system and hydraulics- Test sprayerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM ...

Spotting- and test injection press make REIS type TUS 60 AMachine -No: 791, built in 1974Max. Mold area: 600 x 1000 mmMax. Mold height: 727 mmMax. Mold weight: 2500 kgEjector force at 100 atm oil: 2000 kgPressing force infinitely variable: 10 tControl capacity: 1/100 mmSwing radius of the upper swivel plate: 92 °Load capacity of the upper swing-out plate: 1500 kgLoad capacity of the carriage plate: 2500 kgHeight of the column guide: 245 mmInjection volume: 2.5 lSpec. Spray pressure: 2 - 15 kg / cmColumn diameter: 80 mmDrive power: 5.5 kWHeating power: 1.2 kWAir connection: 2 - 15 atüDimensions L x W x H approx.: 1420 x 1360 2810 mmWeight approx. 2300 kgWith- Control panel- Test sprayer- Heater- ejectorused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We ...

Spotting and test spray press make REIS type TUS 60 / 0K 20Machine -No: 19137/79 Year 1979Technical specifications:Press force: 20 tRetraction force: 10 tgr. stroke: 775 mmEjector force: 3.0 tEjector travel: 200 mmOperating pressure: 175 barTable mounting surface: 570 x 670 mmDistance between columns: 620/470 mmInstallation height: 740 mmPiston diameter: 120 mmDrive power: 7.5 kWtotal installed power: 9.5 kWDimensions L x W x H: 1900 x 1200 x 3100 mmWeight approx: 2300 kgWith- Test spray device- 2 hydr. sockets- separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Column-guided automatic band saw Fabr. RES Type 260 EuropeYear of construction unfortunately not visibleCutting area: 260 mmSaw band size: 4100 x 36 x 1.3 mmDrive power: 5.5 kWExternal dimensions L x W x H: 1600 x 2000 x 2000 mmWeight about: 2 twithout control, it would have to be installed a new controlSpecial price - usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

REXROTH: Pump combination SY3DFEE-2X / 140-140-71 Spare part number: 02004-0961 Manufacturer number: MNR: R901021899 + valve MNR: R900702586 MNR: R901021899 + valve MNR: R900702586 MNR: R910970517 Pump combination 3-way AKP140R / AKP140R / 71DR

REXROTH: Pump combination 140DFEE_140DFEE_71DR Spare part number: 02004-0972 Manufacturer number: MNR: R901021899 + valve MNR: R900702586 MNR: R901021899 + valve MNR: R900702586 MNR: R901021900 + valve MNR: R900702586 Pump combination 3-way AKP140R / AKP140R / 71DR

Vacuum Filling Machine / Sausage Filling Machine / Vacuum Stuffer Manufacturer: REX DÜKER Type: RVF 327 Fully electronically controlled filling and portioning machine, suitable for all types of sausage for straight filling, portioning and turning off all intestinal types. Particularly fry-friendly filling with a clear filling pattern. Equipment: 100 litre filling volume Funnel divisible 60/40 L Machine solid stainless steel Speed, speed and pause length infinitely selectable Level indicator, piece counter, quantity shutdown Portioning range 5 - 10,000 g Portioning speed up to 700 servings/min. Clipper connector on the back filling pressure: 40 bar Three-phase current 400 volts, 50 Hz, 3 phases Program memory for 200 filling programs unique hygiene design modern drive concept minimum energy consumption 12" Touch Screen Control  ...

FIXED BENCH MILLING MACHINE with SWIVEL VERTICAL HEAD and PRISMATIC GUIDES. Brand : DROOP & REIN.
 Model: FS130gku.
 Table: 2200 x 800 mm. Long crossbar : 1700 mm.
 Transverse crossbar : 870 mm.
 Vertical crossbar : 800 mm.
 Spindle taper : ISO 50. THE MACHINE IS EQUIPPED WITH A VIEWER.

REIS gantry robot with substructure 1.8 m high, x approx. 10 m, y approx. 1 m, e.g. approx. 1 m 4-axis robot, very good condition, was only 4 years in operation.

Sculptor copy milling machine Brand Reichenbacher Type R632 / 40 Machine number: 2068 2 80 Milling of wooden figures e.B. nativity figures etc. with copy pen. Also to be used as a copy car carving machine. Machine is to be operated manually. 6 workpieces can be machined simultaneously. Clamping length maximum 1050 mm Workpiece diameter maximum 300 mm If each spindle is used, maximum workpiece diameter 150 mm Milling motor motor power 0.5 kW each Dimensions 3700 mm x 2200 mm x H approx. 1500 mm The machine is in stock with us, but still needs to be assembled and tested.

I sell the spraying automat Renojava yr. 2013 Working width 80mm Element thickness up to 80mm Feeding bands length: 1,60 + 2,60m Technology break 200mm / Element length min. from 300mm. Total length: 4,40m Ring arm system for guns from each side Pump included. Feeding system with motors. Good condition. Available immediately.

ReiCat 600 Catalyzer suitable for roasters from 30 kg up to 60 kg per batch. Environment friendly and cost-efficient technology that neutralises smokes and odour plumes. With the ReiCat Catalyst the micro particles, odours, smoke, plumes and hydrocarbons are converted into harmless substances such as water vapour (H2O) and carbon dioxide (CO2) by using a combination of techniques. This one was manufactured in 2019 and used less than one year in 2020. The price includes shipping to Europe and a 6 month warranty. Don't hesitate to check the seller profile to see other roasting equipment offers

Three-phase permanent magnet motor 3-phase permanent magnet motor used, normal condition used, average condition Please note: we got several new Bosch Rexroth servo drives in stock! We have a selection of new Bosch Rexroth servomotors in stock! Please contact us.

Rotating due to new motorization Removed this REINTJES transmission type WAV 1830 Reduction ratio 3.047:1 Year of construction 1987 Incl. Vulkan Elastic Coupling

We sell a Rego SM4 stop machine. In bakery condition

Reed 40” x 16” Two Roll Mill Hand operated nips Right angle drive Tray fitted beneath Mill Rolls

REP H48Y10W Horizontal Injection Moulding Machine Year of construction 2005 Machine Parameters Volume [cm3] 1000 Clamping force [kN] 1930 Injection pressure [bar] 1500 Moulds dimension [mm] 450x450 Tonnage 1.9t Platen size: 450x450 Cycles: 2,220,383 General condition: operational Dims [mm]: 4200 L x 1400 W x 2200 H Weight [kg]: 6750

Technical data for the pallet rack traverse: Shelving system: Redirack Included in delivery are: 01x pallet rack traverse, used Material color: yellow Box profile: 120 x 50 mm Clear width: 3,205 mm load per pair of trusses 2,575 kg, at the same time. distributed load 02x safety pins, used Version: completely galvanized To secure the longitudinal members Against unintentional lifting General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried o ...

Gear pump Axial Piston Pump NEW/NEW Manufacturer: Rexroth Type: A11VO95DRG / 10R-NSD12K02 Further details and scope of delivery can be found in the Photographs.

Gear pump Axial Piston Pump Overhauled by the manufacturer + conserved Manufacturer: Rexroth Type: A11VO60EP2G / 10R-NPC12N00H-S Further details and scope of delivery can be found in the Photographs. Grey and red lacquered available. Color may therefore differ from the images. for more information see pictures.

Temperature control unit of the tools - REGLOPLAS P140/9/SG51.1/1K/RT45 (4 pcs.) Year of construction: Description: heating capacity - 140°C Heat transfer medium – water/oil Power: 9.9 kW Control: RT45 Price: On request

Lindner Mircromat 2500 HP, 160 kW, with direct drive. Control cabinet with frequency converter. Knife size 43 x 43 x 19.5 mm (carbide). Number of blades 131. Max rotor speed 265 rpm With large filling shaft (5.6 cbm) and filling hood. Internal pusher 7.5 kW. Perforated sieve 30 mm. New machine

Specifications: - Grinding wheel diameter approx. 200 mm - Grinding wheel width approx. 25 mm - Grinding wheel bore approx. 51 mm - Disc speed 1450 rpm - Drive 400 V / 0.7 kW - Space requirement approx. W 600 x H 400 x D 350 mm - Weight approx. 30 kg - Console for wall mounting

Rexroth IPC40.2G1A-512N-P8C-ND-NN-FW Control Unit R911306516-102 CFG-BTV16.1AN-DL-NN-NN 1070170017-118 FWA-BTVBP8-W2k-01VRS-EN-OEMR911306448-101 05W02

feed pressure: 10 bar liter capacity: 1960 l/min Number of working hours: 8539 h voltage: 400 V total power requirement: 55 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 1800 x 800 x 1200 m completely serviced in 2021 and immediately ready for use. incl. Renner refrigeration dryer type RKT CQ 0180 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Redpack P200 Flow wrapper Serial: 660 Stainless flow wrapper, 5500mm overall length with 3500mm infeed, 300mm jaw width, max product height 120mm,

diameter: 250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type MIG/MAG welding system equipped for steel wire in 1.0 mm Rehm brand Type RD 250 Connection voltage 3 x 400 Volt Setting range 35 – 250 amps Duty cycle 40 % ED at 250 Ampere 60% ED at 210 amps 100% ED at 170 amps Current setting 10 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive Fuse 16 amps Dimensions L x W x H 900 x 465 x 855 mm Weight 81 kg Age approx. 15 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 11 ...

Three-phase servo motor Manufacturer: Rexroth Type: MHD112B-024-PG0-AN Model: R911281684 Speed: 4,000 rpm. Shaft diameter: 32 mm Flange diameter: 130 mm Hole circle diameter: 4 x 220 mm Weight approx.: 34 kg Voltage: 600 V Current: 21.9 / 32.9 A Protection class (IP): IP65

Three-phase servo motor Manufacturer: Rexroth Type: MHD115C-024-PG1-BA Model: R911287202 Speed: 4,000 rpm. Holding brake: 70 Nm / 24 V DC / 1.29 A Shaft diameter: 38 mm Flange diameter: 180 mm Hole circle diameter: 4 x 220 mm Weight approx.: 58 kg Voltage: 600 V Current: 47.5 / 71.3 A Protection class (IP): IP65

Stirring and stopping machine Rego SM 2 overhauled The machine when it comes to striking! 1 new whisk 1 new whisk and 20 litre stainless steel boiler new Stand-alone machine 2 working functions 1 x stirring / 1 x beating Working shaft/stirring shaft newly revised Powerful and robust technology Boiler lighting with automatic timer and EMERGENCY STOP DGUV V3 tested Connection 400V, 1 kW, 4 Amp, 16A-CEE plug Dimensions: 640 x 615 x 1380 mm, WxDxH Quality from a specialist company! Used machine completely overhauled with 6 months warranty!

Impact machine Rego SM 2 overhauled The machine when it comes to striking! 1 new whisk 1 new whisk and 20 litre stainless steel boiler new Stand-alone machine 2 working functions 1 x stirring / 1 x beating Working shaft/stirring shaft newly revised Powerful and robust technology Boiler lighting with automatic timer and EMERGENCY STOP DGUV V3 tested Connection 400V, 1 kW, 4 Amp, 16A-CEE plug Dimensions: 640 x 615 x 1380 mm, WxDxH Quality from a specialist company! Used machine completely overhauled with 6 months warranty!

Stirring machine Rego SM 2 overhauled The machine when it comes to striking! 1 new whisk 1 new whisk and 20 litre stainless steel boiler new Stand-alone machine 2 working functions 1 x stirring / 1 x beating Working shaft/stirring shaft newly revised Powerful and robust technology Boiler lighting with automatic timer and EMERGENCY STOP DGUV V3 tested Connection 400V, 1 kW, 4 Amp, 16A-CEE plug Dimensions: 640 x 615 x 1380 mm, WxDxH Quality from a specialist company! Used machine completely overhauled with 6 months warranty! Visit our large bakery machinery warehouse!

Impact machine stirring machine Rego Model: SM 4 overhauled with automatic timer The machine when it comes to striking! 2 working functions 1 x stirring / 1 x beating 1 new whisk 1 new whisk 1 40 litre stainless steel boiler new Working shaft/stirring shaft newly revised Powerful and robust technology Boiler lighting, timer EMERGENCY STOP protection circuit DGUV V 3 tested Connection 400V, 2 kW,16A-CEE plug Dimensions: 720 x 680 x 1710 mm, WxDxH Weight approx. 285 kg. Quality from a specialist company! Used machine overhauled with 6 months warranty! Option: Stainless steel pedestal Gas ring burner

Planetary agitator Model: Rego PM 40 E Stirring machine Power adjustment infinitely variable Intervention - Protective grille LED control with timer 1 stainless steel boiler 40 liters 1 broom, 1 flat stirrer electric boiler stroke Stand-alone machine with tank car DGUV V3 tested Connection 400V, 2,3 kW,16A-CEE plug Dimensions: 970 x 680 x 1700 mm, DxWxH Weight 400 kg. Used machine overhauled with 6 months warranty