re cutting used for sale

Approx. 30 pieces of floor protection mat are offered to prevent the wear and tear of chairs. estimated value of goods 600 €Shipping within Germany possible - direct processing with the seller. Only bid if you have sufficient financial resources, a bid is binding. The Euro pallet is not part of the auction. Auction-ID: A7-46944-180

Contain various items that have been tested for functionality. Shipping within Germany possible - direct processing with the seller. Estimated value of goods 2500 € The Euro pallet is not part of the auction. Auction-ID: A7-46944-59

(PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-40139-173

Contain various items \"untested returned goods\" that are expressly sold as defective. Shipping within Germany possible - direct processing with the seller. Estimated value of goods 2000 € The Euro pallet is not part of the auction. Auction-ID: A7-46944-216

Contain various items that have been tested for functionality. Shipping within Germany possible - direct processing with the seller. Estimated value of goods 2500 € The Euro pallet is not part of the auction. Auction-ID: A7-46944-61

Incl. heavy-duty shelf, pack size (LxWxH): approx. 1200x610x800 mm (2x) Auction-ID: A1-47009-8

Chevrolet 3100 Pickup, built in 1951 (Advance Design Series) Classic US-1/2-ton pickup, highly sought-after collector's vehicle Completely restored (frame-off restoration) Body completely disassembled and professionally rebuilt Cavity sealing carried out (corrosion protection) All seals renewed Paintwork in beige/cream, very neat overall condition Interior new or high-quality refurbished (bench, panelling) True-to-the-original cockpit with working instruments Manual transmission (classic manual transmission) In-line six-cylinder petrol engine (typical for model series) Technically perfect condition, ready to drive immediately Driven less than 10,000 km since restoration Chassis and frame in very good condition No discernible rust – substantial vehicle Classic steel rims with original look Loading area clean and restored H license plate available (tax and insurance privilege) German reg ...

1.Carmen CR3200 – Hair straightener – ION technology – LED indicator 2.OK. OHD 4211 Hair Dryer Black The products have not been tested for functionality. They may have scratches, dents, incompleteness, or general signs of wear. Visit us on the day of the inspection to get an exact picture of the reason for the return. Shipping is also possible. For more information, please contact us. Auction-ID: A1-47023-104

Formwork skins, removed from frame loops, discarded Super suitable for formwork work, cutting, storage, lost formwork, etc. approx. 50sqm, d approx. 18mm SO001252 Auction-ID: A1-46973-436

incl. charger and transport case Auction-ID: A1-47009-87

Sales vehicle / food truck with professional conversion Ideal for weekly market, direct marketing or snack bar business Construction of Borco-Höhns with integrated cooling technology Vehicle: Manufacturer: Renault Vehicle type: Master (sales vehicle) Setup: Borco-Höhns sales setup Refrigeration unit available (Worthmann) Equipment: Large sales flap with glass display Refrigerated counter integrated Bizerba scale (BC 800, up to 15 kg) Bizerba Meat Slicer (VS 11) Shelves & storage space in the interior Stainless steel / plastic work surfaces Lighting in the sales room Technology: Refrigerant: R449A Connection: 230V Cooling system with approx. 1.98 kW output Sales development professionally isolated Auction-ID: A7-46433-1508

Interchangeable Wheel Set for Rice Cutter UL 1800, , in wooden box Auction-ID: A1-47017-7

Oil drip pan stationary red Auction-ID: A7-47048-73

Combisafe Plastic Recess Tubes, Recess Sleeve, Bar Goods, for cutting, consisting of: 120 yellow plastic tubes PP-HM 54 x 2mm, length 2.40m 22 yellow plastic pipes without further description, apparently with the same dimension, length 3m Factory number: 1255 (Accessories for Combisafe prefabricated ceiling fastening item no.: 1231) SO001365 Auction-ID: A1-46973-203

incl. 2 batteries, charger and transport case Auction-ID: A1-47009-41

The products have not been tested for functionality. They may have scratches, dents, incompleteness, or general signs of wear. Visit us on the day of the inspection to get an exact picture of the reason for the return. Shipping is also possible. For more information, please contact us. Auction-ID: A1-47023-102

1.BaByliss Perfect Finish Hair Dryer Brush AS126E - Multistyler 2.BABYLISS Black Onyx Hair Dryer 5911E Dark Blue The products have not been tested for functionality. They may have scratches, dents, incompleteness, or general signs of wear. Visit us on the day of the inspection to get an exact picture of the reason for the return. Shipping is also possible. For more information, please contact us. Auction-ID: A1-47023-105

Dodge Challenger 3.6 SXT Rallye Redline, built in 2014 Original US vehicle (imported from California) 3.6L V6 petrol engine with 305 hp (224 kW) Automatic transmission, rear-wheel drive (RWD) Mileage: approx. 117,355 miles (~189,000 km) Body: 2-door coupé in classic muscle car design Exterior color: White with original Rallye Redline accents (sports look) Interior: black leather interior, neat overall impression Left-hand drive (US specification) Vehicle condition: used, due to age and mileage Engine starts, vehicle is ready to drive (\"Run & Drive\") No comprehensive technical examination has been carried out Wear and tear and signs of use present Electronics/functions not fully tested Vehicle history: Salvage Title (California, USA) Previous damage available (type and extent not fully documented) Repair or maintenance history unknown Equipm ...

Recirculation Air Filter System - Ref 6606 Manufacturer: Denios Model: UFA.20.30 Year: 2017 Serial Number: A1101-207616-0817-3 Overall dimensions (W x D x H): 560 x 270 x 220 mm Weight: 15 kg CE compliant ATex Incoterm: FCA Auction-ID: A1-47051-135

Technical details Manufacturer: Kogast Sistemi / Kovinastroj Gastronom Type: Refrigerated stainless steel preparation/work table Year: 2009 Power: 0.24 kW Weight: Approx. 139 kg Configuration: - 3-door refrigerated undercounter storage - Stainless steel work surface - Raised backsplash - Integrated refrigeration unit - Internal GN tray rail supports - Insulated refrigerated compartments Control system: Digital Eliwell temperature controller Refrigeration type: Positive cooling refrigerator Application: - Restaurants - Hotel kitchens - Pizzerias - Bakeries - Catering operations Condition: Used Auction-ID: A7-47053-6

BA300 disconnectors with controllable pressure zones are designed to protect drinking water networks against depressions, back pressures Auction-ID: A1-47049-85

Technical details Manufacturer: ISA Model: Plug In 12 Type: Refrigerated pastry / bakery worktable Configuration: - Stainless steel worktop - 3-door refrigerated undercounter storage - Integrated plug-in refrigeration unit - Digital electronic thermostat/controller - Removable wire shelving - Stainless steel interior Cooling type: Ventilated refrigeration system Application: - Pastry preparation - Confectionery production - Bakery cold storage - Dessert assembly stations Dimensions: - Length: Approx. 1800 mm - Width: Approx. 700 mm - Height: Approx. 900 mm Weight: Approx. 140 kg Condition: Used Auction-ID: A7-47053-29

FARO Titanium Portable Coordinate Measuring Machine Arm Auction-ID: A1-47049-27

Manufacturer: SCM Model: Record Year: 2009 Serial Number: AA2/001067 Power Supply: 400 V – 3F – 50 Hz Weight (kg): 5300 Equipment: Bar table and suction cups, automatic circular tool changer, multi-spindle head, vertical CNC milling unit, conveyors and automatic guides Control: CNC SCM with NEC display, keypad and mobile consoleAccessories: numerous tool holders and accessories visible on the rack System: independent vacuum pump and connected suction Dimensions (mm): 9000 × 5000 × 3500 Remarks: Industrial wood CNC machining center for milling, drilling and complex machining operations. OERTLI TOOLS PROVIDED. Auction-ID: A1-46801-404

BLACKMAGIC Design DaVinci Resolve Mini Panel + CUBIX Xpander Elite + HP Z8 The DaVinci Resolve Mini Panel is a compact panel with many features and controls Auction-ID: A1-47049-12

Vehicle located in Spain. Dutch registered Renault Trafic camper van with pop-up roof conversion. The vehicle is currently located in Spain but remains registered in the Netherlands (NL registration). Equipped with: Pop-up sleeping roof Tow hitch Swivel front seats Tinted rear windows Wood-finished interior panels Kenwood audio system Atlas ShorePower electrical system Diesel engine with manual transmission. Odometer reading during intake: approx. 279,193 km. The camper conversion offers an open interior layout with multiple possibilities for further customization or camper use. Visible traces of use and cosmetic wear consistent with age and mileage. Sold as seen in the pictures. Auction-ID: A1-47061-1

Format parts for blistering machine - Ref 6351 Manufacturer: IDI pharma 3 suitcases Overall dimensions (W x D x H): 350 x 300 x 200 mm Weight: 40 kg Incoterm: EXW Auction-ID: A1-47051-114

SPEAR TRIDENT SMAR-11N-224 PN 950-0024-05 Water Cooled Rechargeable Lithium Battery Rechargeable water-cooled lithium battery Auction-ID: A1-47049-225

MAE CONTROLS - C311R Resonance 58E0035-C Electronic Resonance Precision Instruments Auction-ID: A1-47049-175

Technical details Type: Commercial refrigerated preparation counter / bakery workstation Configuration: - Stainless steel preparation surface - Integrated refrigeration module - Double-door refrigerated undercounter storage - Elevated stainless steel ingredient shelf - Digital temperature controller - Adjustable stainless steel legs Construction: Heavy-duty stainless steel Application: - Bakery production - Pastry preparation - Pizza and sandwich preparation - Confectionery workflow Dimensions: - Length: 1500 mm - Width: 800 mm - Height: 850 mm Weight: Approx. 180 kg Condition: New / unused Observed condition: - Protective film still attached - Excellent cosmetic condition Auction-ID: A7-47053-71

HPE - DL360 Gen10 5220R 32G 8SFF Reman Svr - TAG CZ214609H4 Does your data center need a dense, secure, performance-driven server that you can confidently deploy for virtualization, databases, or high-performance computing? The HPE ProLiant DL360 Gen10 Server delivers security, agility, and flexibility without compromise. Auction-ID: A1-47049-47

BA300 disconnectors with controllable pressure zones are designed to protect drinking water networks against depressions, back pressures Auction-ID: A1-47049-86

NXP Semiconductors - RFEL24-500 Module Rev X3 The RFEL24-500 Laboratory Enclosure is a fully integrated 2 x 250 W RF development system for the 2.45 GHz RFEM24-250 module Auction-ID: A1-47049-77

SPEARPS TRIDENT SMAR-11N-224 PN 950-0024-05 Water Cooled Rechargeable Lithium Battery Rechargeable water-cooled lithium battery Auction-ID: A1-47049-226

The repackaging system is used to unpack glass bottles from pallets containing full module boxes, repackage them into ‘open basket’ carrier boxes holding four bottles, and repack them into pin-partition crates with palettising. The system consists of the following individual machines: 1. Depalletising of full module crates / repalletising of empty module crates: Here, pallets containing full module crates are fed in and destacked, whilst empty crates are stacked and transported out. 2. Repackaging machine: Here, 20-unit module boxes are unpacked, 4-unit carrier cartons are unfolded and filled with bottles/packed. 3. Packing into pin-partition crates and palletising: Here, the 4-unit carrier cartons are packed into pin-partition crates, stacked onto pallets, and transported out of the system., Additional title: Repackaging of full pallets containing modular crates into pallets contain ...

Used revised Tetra Pak TBA19 330 Prisma line 9000 bph - 2008Technical Specifications & Performance DataThis used bottling line is a revised Tetra Pak A3 Flex V300 configuration designed specifically for 0.33 L Tetra Prisma cartons, ideal for second hand industrial packaging and beverage production environments. Engineered for aseptic operation, it supports reliable high-speed packaging for dairy and juice applications with consistent quality and uptime.Manufacturer: Tetra PakMain filler: TBA 19, Version 300VProduction speed: Up to approx. 7,500 packs/hourFormat compatibility: 0.33 L Prisma (330 ml)Container type: Carton (Tetra Brik/Tetra Prisma)Filler year: 2009Capper: CAP 30 for Dream Cap (YOM 2019)Packer: TCBP 32 cardboard packer (YOM 2012)Ancillary equipment: Conveyor line, line controller, Domino printer, paper trolleyAseptic packaging: Yes (for long shelf-life products)Reported hour ...

() is equipped with an insulated - and is ideal for industrial cooling processes. It has two powerful fans and integrated piping and controls. The coolant is glycol, and the refrigerant used is R-410A. The system offers a cooling capacity of 14 kW at an . () . (). The 5.5 kW electric motor operates at 380–415 V, 50 Hz, and 20 A current consumption. This compact unit enables efficient, reliable cooling in industrial processes. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: externally mounted cooling unit with glycol buffer storage tank, Cooling capacity: 14 kW, Pressure compressed: 4,2 bar, Pressure relaxed: 1,9 bar, Gross volume glycol buffer tank: 400 l, Power: 5,5 kW, Current: 20 A, Voltage: 380-415 V, Frequency: 50 Hz, Features: Cooling unit with 2 fans, glycol storage tank, piping, control system

Ice water generator for cooling supply of wort cooler (2nd stage), fermentation cellar (= 100 hl capacity), storage cellar (= 320 hl capacity) and pressure tanks (= 260 hl capacity) in a microbrewery with 20 hl output., Additional title: ice water generator, Cooling capacitry: 14 kW, Power: 6,2 kW, Length: 1600 mm, Width: 1600 mm, Height: 1800 mm, Position: free standing, Base construction: cylindrical tank with refrigeration unit on top, on square tube frame with domes, Features: insulated stainless steel tank with side cover, semi-hermetic reciprocating piston compressor, copper tube coil exchanger, control box, cooling water pump

NH3 refrigeration system for cooling glycol and brewing water, consisting of the following components: - NH3 separator brewing water 890 l (T0 = -0.5°C) - NH3 separator glycol 647 l (T0 = -6 °C) - 3 x piston compressors (Bitzer type W4GA) - 2 x brewing water pumps - Plate heat exchanger as brewing water cooler Q0 = 200 kW - Evaporation condenser - Water tank approx. 470 hl - Glycol tank 80 hl + 2 x glycol pump - Plate heat exchanger as glycol cooler Q0 = 100 kW - High pressure collecting vessel 830 l - Danfoss frequency inverter type VLT HVAC, Additional title: NH3 Cooling plant, Cooling capacity Q0 brew water: 200 kW, Cooling capacity Q0 glycol: 100 kW, Evapotation temperature t0 brew water cooling: 0 °C, Evaporation temperature t0 glycol cooling: -6 °C, Current: 185 A / 250 A, Features: 2 x NH3 separators (t0 = -0.5 °C; t0 = -6 °C); 3 x piston compressors; 2 x brewing water pumps ...

Refrigeration plant with 70 kW complete with compressor, condenser, in-house cooling tower, plate heat exchanger for glycol cooling and control cabinet. Refrigerant: Ammonia, Additional title: Refrigerant: Ammonia, Cooling capacity: 70 kW, Design to: -8 °C, Design tc: 27 °C, Power: 15 kW, Operation / Control: Control cabinet with hardware control, Features: Compressor, condenser, plate heat exchanger, glycol cooler, in-house cooling tower, control cabinet

Engine overhaul 10000 Gearbox reserved in 2024 Double wheels available Air conditioning available Air suspension seat Auction-ID: A3-43539-11904

included all grinding tools without closets, tools for profiling, exchangeable gears and a spare machine motor for AZA machine model! Auction-ID: A7-47067-5

Power: 0.77 kW Operating parameters: Working pressure 15 bar; FAD 3.50 m³/min (124 CFM); noise ~50 dB(A); dim. 628 x 521 x 825 mm; wt. 75 kg Workpiece capacity: Compressed air drying for industrial air systems Supported edges: N/A Edge types: Air drying; moisture removal Included equipment: Refrigerated air dryer; air-cooled system; control panel; compact housing Compliance: Industrial air treatment unit; CE N/C Power supply: Electric Year/Manufacturer: 2005; Manufacturer N/C Remarks: Used condition; suitable for integration with compressors up to ~3.5 m³/min capacity Compact refrigerated air dryer for efficient moisture removal in compressed air systems up to 15 bar. Auction-ID: A7-47066-8

Type: Pipe threading machine Manufacturer: REMS Model: Magnum CE Marked: Yes Power supply: 230 V Motor power: 2,100 W Frequency: 50 Hz Threading capacity (pipes): BSPT R 1/8\" – 2\" Threading capacity (bolts): M8 – M60 (left/right) Threading speed: 52 – 26 rpm g>Weight: approx. 71.7 kg (without accessories) Equipment: - Integrated pipe clamping system - Thread cutting unit - Control foot pedal - Coolant/lubrication system Condition: Used, in working condition; used only for 10 days; barely used Remarks: Machine shows normal signs of use; see photos for details Own mass: approx. 72 kg Dimensions (L x W x H): approx. 825 x 580 x 495 mm Auction-ID: A7-47063-21

Type: Refrigeration dryer with thermal mass control Model: SECOTEC (type TA 8 or higher) YOM: 2013 Flow rate: 2.55 m³/min Power consumption (100% flow): 0.80 kW Power consumption (50% flow): 0.53 kW Pressure loss: 0.20 bar Air connection: G 1 Condensate drain: G 1/4, ECO-DRAIN 30 with ball valve Electrical supply: 230 V / 1 Ph / 50 Hz Dimensions (W x D x H): 620 x 540 x 963 mm Weight: 116 kg Features: SECOTEC controller with dew point trend display, cycling refrigerant compressor, insulated cold surfaces, floating alarm contacts Auction-ID: A7-47066-22

ATLAS COPCO GA 5 FF – Screw Compressor General data: Manufacturer: Atlas Copco Model: GA 5 FF Machine type: Screw compressor with integrated air dryer and air receiver Year of manufacture: 2003 Operating hours: approx. 38000 h Condition: Serviced by Atlas Copco Service history: Available Technical details: Rated power: 5.5 kW Working pressure: 8.5 bar Dimensions: Approx. 1200 x 800 x 2100 mm (including packaging) Description: Industrial screw compressor Atlas Copco GA 5 FF equipped with integrated air dryer and air receiver. Designed for reliable compressed air supply in workshop and industrial environments, offering efficient operation and compact design. Auction-ID: A7-47066-9

Type: Oil-free piston compressor Model: Kaeser AIRBOX CENTRE 550 with integrated dryer & air receiver Rated power: 3 kW Air flow: 255 l/min Max. pressure: 10 bar Working hours: 2811 h (2533 h under load) YoM: 2014 Pump: Replaced with new unit in 2021 Last service: Kaeser C-Service on 06.10.2022 Maintenance: Regularly serviced Features: Integrated dryer, receiver tank, IE3 motor, refrigeration dryer (dew point +5 °C), oil-free operation Dimensions (D x W x H): 1730 x 820 x 1640 mm Weight: 550 kg ⚠️ Service manual not available. Please view the test video linked with the lot. Auction-ID: A7-47066-14

Motor power: 4 kW YOM: 1997 Operating hours: 0 (fully refurbished) Flow rate: ~0.55 m³/min at 8 bar Max. pressure: 10 bar Air tank volume: 90 l (integrated) Noise level: ~64 dB(A) Cooling: Air-cooled Electrical supply: 400 V / 3 Ph / 50 Hz Control system: Basic Connections: Air outlet: 3/4\" BSP | Condensate: 1/2\" BSP Dimensions (L x W x H): 600 x 630 x 850 mm Weight: ~150 kg Condition: Refurbished to \"as new\" with zero hours Features: Energy-efficient, robust design, regular maintenance required Replaced parts: New air & oil filters, separator, bearings, gaskets, belts, electrical components, intake & MPV valves Auction-ID: A7-47066-12

stations:24 weight of the machine ca.:3,5 t ·Precise serial production of part families and demanding workpieces ·Table index repeatability of ± 2.5 µm ·24 stations with up to 44 machining units for very high output rates ·Ideal for high volume production with fast cycle times

turning length:630 mm total power requirement:16 kW weight of the machine ca.:5 t dimensions of the machine ca.:3400 x 1500 x 1600 mm swing diameter over slide rest:Hinterdrehschlitten 250 mm centre height:über Hinterdrehschlitten 150 mm center height over bed:300 mm turning spindle:Kopf DIN 55021 Gr. 8 centre distance:1000 mm accessories::2 Schränke Wechselräder