re cutting used for sale

910-liter 316 stainless steel reactor with jacket made of 316L stainless steel, hermetic heat-insulation, control panel and agitation. Dashboard Description: Endress+Hauser HMI Display "Emergency reset" pilot Emergency mushroom Display RPM Product temperature display 3-position stirrers selector (1- upper agitation, 2- lower agitation, 3- both at the same time) Off-center three-blade helix shake on the upper bottom. Manufactured by SPX, Lightnin SR5S200 model with a 0.37 kW motor. Magnetic stirring on the bottom with a 0.55 kW motor. Volume Total capacity 910 L Material Stainless Steel 316/316L Equipment Setup Agitator Heat Burning Transportation Information Length 1600 mm Width 1200 mm Height 2100 mm Weight 1000 Kg Status In your state

130-liter stainless steel reactor with jacket and agitation. Anchor type agitation with 3 propellers of 1 blade at different heights Agitation motor 1.5 kw 1420 rpm 50 hz 230 v. Equipped with two 2,500 W electric heating elements in the jacket Control panel incorporated into the reactor On wheels. Volume Total capacity 130 L Material Stainless steel Technical characteristics ENGINE 1 1.5 kW 1420 rpm 50 Hz 230 V Equipment Setup Agitator Shirt On wheels Transportation Information Length 1300 mm Width 900 mm Height 1700 mm Documentation CE Certificate Status In your state

Stainless steel reactor of the TINSMACAL brand of 2000 liters with jacket. Year 2007. Rear agitation tripala. On 3 labels. 350mm manhole Volume Total capacity 2000 L Material Stainless steel Technical characteristics Year of manufacture 2007 Equipment Setup Agitator Shirt About Labels Equipment dimensions Inside diameter 1390 mm Body Height 1350 mm Transportation Information Width 2100 mm Height 2500 mm Manufactured by Tinsmacal

Hastelloy reactor manufactured by INSTALACIONES INDUSTRIALES GRAU of 3400 liters with jacket and rear agitation three. Year 2019. On 3 labels. 495mm manhole Volume Total capacity 3400 L Material Hastelloy C-276 Technical characteristics Year of manufacture 2019 Equipment Setup Agitator Shirt About Labels Equipment dimensions Inside diameter 1600 mm Body Height 1600 mm Transportation Information Width 2300 mm Height 3000 mm Weight 1150 Kg Manufactured by Grau Industrial Facilities

Module was changed because a PCSS conversion took place on the machine and therefore this module no longer fits. Fully functional.

We offer industrial equipment for restaurants, bakeries, cafes. Everything is in working order, used. We are open to negotiations on price and delivery. Refrigerator NOVUM, 805L

CENTAURO steel band saw model CO700: - with 700mm solid flywheels - Motor KW 3 / HP 4 , Volt 380 - Tilting table up to 20° - upper blade guide - weight about 400 kg Year 1999, CE regulations

Cooling capacity 55 kW Refrigerant R410A The device has: - Compressor x 2 - Separate container for medium - Circulating pump - Heat exchangers - Radiator - Fan x 2 The device after maintenance, fully functional 3-month operation warranty in Poland

- Shredding line for the treatment of recycled wood, pallets and industrial waste. - Includes: • Feed hopper with metal chain conveyor for material loading. • CASSEL metal removal system. • HAMMEL NZ-S 1000 D shredder: motor power 250 KW-1485 rpm, rotor diameter 1000 mm, rotor length 1500 mm, 72 knives, control panel. • Conveyor belts marked with a red X in photo number 3 are not included. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-43986-1

Round filling table with stainless steel attachment, table diameter: approx. 1,800 mm,, Diameter of the filling openings: approx. 68 mm,, with hinged plate conveyor for supply and removal: approx. 4,400 mm long.

Refrigeration system with approx. 18 evaporators 1 x TK composite system 2 x Plus Verbung Refrigerant R 404 A Without capacitor

1 x 4 x HSK 342KW skid at 7/-3°C, 1 x condenser, 1 x oil cooler

Various smaller workshop metalworking machines from various manufacturers are available. 1) Brush machine RSA STL, year of manufacture: 1979. 2) Belt grinder Flott BSM 75. 3) Pull saw Graule ZS 85, year of manufacture: 1994. 4) Belt grinder Ludwig Gartner AZ2N. 5) Band saw Raim 360, year of manufacture: 1995. 6) Column drilling machine Quantum B 30 GS, year of manufacture: 2005. 7) Belt grinding machine HM TAS 75, year of manufacture: 2000. 8) Assembly band saw Berg & Schmid PBS 148. 9) Pull saw Graule ZS 200 N-S, year of manufacture: 2015. 10) Aluminum circular saw MEP Cobra 350 MA. 11) Notching saw Graule AS 450-D, year of manufacture: 2003. 12) Corner crimping press Rapid HP-205, year of manufacture: 1995. 13) Hydraulic press Schüco. 14) Notching saw Graule AS 450, year of manufacture: 2000. 15) Tie bar punching machine Schüco LA 10, year of manufacture: 2020. An on-site inspection  ...

CONTROLS    SIEMENS S5 DECOILER   sheet width max.: 370 mm   sheet width (min): 80 mm LEVELLER UNIT   sheet thickness max.: 2.5 mm   sheet thickness min.: 1 mm ELECTRICAL SPECIFICATIONS   mains frequency: 50 Hz

Refrigerated display case Dilara 180 Convection refrigerated display case 4 stainless steel shelves verst. Sliding doors made of insulating glazing Temperature adjustable from +3 to +15°C Coolant R 290 only DGUV V3 tested by us Measurements; 1800 x 750 x 2000 mm, WxDxH Connection: 230V, 1166 Watt Demonstration device & SAB tested

SB Sales Shelf 950 with lighting 4 beech wood grates 12 Removal flaps bottom with shelf Connection 220V Used device

SB Sales Shelf 1200 with lighting 4 beech wood grates 12 Removal Flaps bottom with shelf Connection 220V Used device

Quail Trunk Refrigeration Cobox HLFHerder : Quail TrunkType : COBOX HLF 6080-5 / BHF-80-TCyear of construction: 2010COBOX HLF For shock freezing of dough pieces and for long-term storage of frozen dough pieces and semi-baked Temperature range: -5 Â C to -35 Â CDedetails see pictures

Bread refrigerated trolley stainless steel with wooden supports with 10 wooden supports on castorsDimensions :Height: approx. 183 cmWidth: approx. 127 cmLength: approx. 42 cm See pictureShipping costs please ask for

This used PY-D continuous distillation unit converts waste engine oil, pyrolysis fuel oil, and heavy crude oil into non-standard diesel fuel with a high yield of 80–90%. The horizontal-type reactor operates at normal pressure using a hot-air heating method and cycle-water cooling, making it a reliable, low-maintenance solution for industrial waste oil recycling. Emission control is handled by a new DE-sulfurization smoke scrubber system. Full Technical Specifications - Equipment Model: PY-D - Suitable Raw Materials: Waste engine oil, Pyrolysis fuel oil, Crude oil - Structure: Horizontal Type - Daily Capacity: 5 – 6.5 MT - Work Pressure: Normal Pressure - Oil Yield: 80% – 90% - Power Consumption: 18 kW/H - Cooling Method: Cycle water - Condensers: 4 pieces of Vertical condensers - Emission Treatment: DE-sulfurization Smoke Scrubbers - Heating Method: Hot Air - Type of Installation ...

Dimensions: - Width: 1750 mm - Depth: 1500 mm - Height: 2400 mm (without base) Equipment : - Oval manhole - Remaining drain NW40, Fredrich - Clarification drain NW40, Fredrich - Sampling - Stand display - Connection for ventilation

Dimensions: - Width: 1750 mm - Depth: 1500 mm - Height: 2400 mm (without base) Equipment : - Rectangular manhole 320 x 420 mm - Remaining drain NW40, Fredrich - Clarification drain NW40, Fredrich - Sampling - Stand display - Upper door 320 x 420 mm - Connection for ventilation

Dimensions: - Width: 1500 mm - Depth: 1500 mm - Height: 2400 mm (without base) Equipment : - Rectangular manhole 320 x 420 mm - Remaining drain NW40, Fredrich - Clarification drain NW40, Fredrich - Sampling - Stand display - Upper door 320 x 420 mm - Connection for ventilation

Omron Solid State Relay Item number: G3PB-225B-VD INPUT 12 – 24 V DC LOAD 50/60 Hz 100 – 240 V AC, 25 A switching load for switching temperature loads Mint condition !

VIBRATING SCREEN 2 OUTLETS, Support structure made of painted carbon steel, Screen dimensions 1500x500 mm, n.2 material discharge outlets, upper screening frame 8 mm., closed at the start for 200 mm, with flow deflector flaps, AISI 304 stainless steel mesh, Drive system comprising 0.75 kW, 1 HP B3 P4 400 V 50 Hz electric motor,, eccentric drive unit., Fixed side and top safety guards,, Electrical system with start/stop switch and emergency stop button., Safety side protection carters, Instructions manual, CE, electrical drawings., If you need anything different please give us the following details., HEIGHT - LENGTH - SCREEN HOLES - NUMBER OF SCREENS - CAPACITY in kg/h, Standard classifying surface is 1500×500 mm. (x 1.000 mm H) which covers most extruders up to 1300 kg./h, but you can have longer surfaces when a cooling action is needed, particularly for PVC, or for higher capacity extr ...

Manufacturer: Formeco Model: DV25 AX Machine type: Cyrel solvent recycling machine Year of manufacture: 2000 Condition: Used Find more here - / Contact us at -

ZENO shredder type ZTLL 3000 x 2500 For crushing PVC window frames Capacity approx. 10 t/h with screen perforation 50 mm Ø Inlet cross-section: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor flight circle: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) positive inserts, 80 x 80 x 45 mm on tool holders Rotor Bearing: Pillow Block Bearing Rotor body: hardfaced (wear protection) Water spraying funnel: flat jet nozzles, à 3 l/min at 3 bar Screen design: solid screen basket, reinforced with ribs, with screen quick-change device Counter blade: with cutting gap adjustment and foldable Side walls in the rotor area: replaceable, Hardox material Hopper: 1300 mm high, flared on 4 sides, double-walled with concrete filling, without lid Machine weight: approx. 43,000 kg Control cabinet (loose, for controlling the machine, incl. soft sta ...

2X RESERVE KNIFE FOR POLAR 76 EM Format (cm): 76

Reflective light barrier, light barrier, reflection light scanner, reflex scanner -Manufacturer: Wenglor, reflex sensor with background suppression unused OVP -Type: HN55PA3 -Scanning range: 500 mm -Supply voltage: 10 ... 30 V -Number: 5x buttons available -Price: per piece -Dimensions: 100/55/H30 mm -Weight: 0.1 kg/piece

Stainless steel, VA, chrome-nickel steel, material cuts, stainless steel, chrome steel, rust-free -Material: cutting and manufacturing -Round steel, tubes and sheets -different materials: in stock -Material numbers: 4301, 4541, 4571, 1.4828, 1.4876, 1.4841, 1.4878 -Please ask for the material you want with the dimensions. -Price from: per kg and cut depends on material

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, dividing hood compressor, dividing hood compressor -Handover: in its current condition as inspected -Power outlet: Damage, see photos -Manufacturer: Frigopol, separating hood compressor -Type: D 60300 -Power: 2.2 kW / 1450 rpm -Voltage: 220-240/380-420 V -Dimensions: 400/400/H500 mm -Weight: 71 kg

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine, cooling unit -Manufacturer: Bitzer, Compressor Motor Compressor -Type: BHS 592 S -Power: 3 kW / 1450 rpm -Volume flow rate: 22.14 m³/h -Max. operating pressure: 24.5 bar -Number: 2x cooling units available -Price: per piece -Dimensions: 550/315/H390 mm -Weight: 88 kg

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners, polyurethane hose, suction hose, hose, vacuum cleaner hose, spiral hose, suction hose, hose connections, hand pipe, hose connector -Manufacturer: Nilfisk, Bent End Plastic Tube Ø 40 VA unused OVP -Type: 107402631 -Diameter: Ø 45 mm -Number: 4x pipe available -Price: per piece -Dimension: Ø 48 x 320 mm -Weight: 0.1 kg/piece

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, dividing hood compressor, dividing hood compressor -Manufacturer: Frigopol, separating hood compressor -Type: D 60300 -Power: 2.2 kW / 1440 rpm -Voltage: 380/660 V -Number: 4x cooling units available -Price: per piece -Dimensions: 400/400/H455 mm -Weight: 68 kg/unit

heating, gas and oil burner, automatic burner control, gas relay, control box, burner control, burner management, pressure monitor, pressure switch, pressure regulator, gas pressure regulator -Manufacturer: Kromschroder, gas pressure regulator unused OVP -Type: GDJ15R04-0 -p max.: 400 mbar -Dimension box: 110/130/H100 mm -Weight: 0.6 kg

Refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine -Manufacturer: Bitzer, Compressor Motor Compressor -Type: BHS 752 -Power: 4 kW / 1450 rpm -Volume flow rate: 28.11 m³/h -Max. operating pressure: 24.5 bar -Dimensions: 640/450/H425 mm -Weight: 131 kg

Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder -Manufacturer: Kämpf, Mounting bracket A19 TGL 30-1226 -Recording: MK4 -Price: per piece -Number: 24 pcs. -Dimensions: Ø 34 x 350 mm -Weight: 1.6 kg/pc.

Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder -Manufacturer: Kämpf, Mounting bracket A13 TGL 30-1226 -Recording: MK3 -Price: per piece -Quantity: 14 pieces -Dimensions: Ø 24 x 295 mm -Weight: 0.8 kg/piece

Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder -Manufacturer: Kämpf, Mounting bracket A27 TGL 30-1226 -Recording: MK4 -Price: per piece -Quantity: 19 pieces -Dimensions: Ø 46 x 390 mm -Weight: 2.2 kg/piece

Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder -Manufacturer: Kämpf, Mounting bracket A22 TGL 30-1226 -Recording: MK4 -Price: per piece -Quantity: 21 pieces -Dimensions: Ø 40 x 370 mm -Weight: 1.8 kg/piece

Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder -Manufacturer: Kämpf, Mounting bracket A16 TGL 30-1226 -Recording: MK3 -Price: per piece -Quantity: 11 pieces -Dimensions: Ø 28 x 310 mm -Weight: 0.9 kg/piece

Braking resistor, charging resistor, damping resistor, filter resistor for crane systems, bridge crane, gantry crane, power resistor, steel mesh fixed resistor device, steel mesh resistor -Frizlen steel grid fixed resistor device: Art.-ID 56489 -P: 9 kW -R: 1 ohm -E: 2700 kWs -Price: per piece -Number: 2 pieces -Dimensions: 600/480/H450 mm -Weight: 42 kg

Turning device, turning station, turning table, rotary station, rotary table, hydraulic press, workshop press, oil hydraulic press, workshop hydraulic press -without: hydraulic unit (can be supplied at an extra cost) -Turning station for: rotating workpieces -Inner width: 1075 mm -Interior height: 720 mm -Transport dimensions: 2840/1600/H2300 mm -Weight: 969 kg

-Camera-based code readers Manufacturer: SICK -Type: ICR845-2E1020 -LED incident light lighting Manufacturer: CCS -Type: LDL2-74x30RD-M12 -Control box with control Manufacturer: SICK -Type: CMC 400 -Cameras and control system come from a large conveyor system -multiple cameras available Price: per piece -Weight: 3.5 kg

Wire reel, pasture wire reel, barbed wire winder, wire winder, wire winding machine, pasture fence winder, winding device -Drum diameter: 800 mm -Drum width: 990 mm -Drive: hydraulic -The device could be used with a corresponding front loader or three-point hitch -without front loader mount and hydraulic connections -Dimensions: 1020/1450/H830 mm -Weight: 318 kg

Replacement knife for table shears, replacement blades, cutting knives, shear knives -Number: 2x knives available -Angle honed: 90° -Dimensions: 20 x 80 mm -Lengths: 2x 2397 mm -Hole spacing from: 73/125/200/200/200/200/200/200/200/200/200/200/200/125/73 mm -Threaded hole -Price: complete -Weight: 56 kg

Line regulating valve, shut-off valve, pressure relief valve, shut-off valve, safety shut-off valve, safety relief valve, pressure monitor, pressure switch, pressure regulator, gas pressure regulator -Manufacturer: ltron, safety relief valve -Type: 275-D -PN: 16 bar -Connection: DN G 1 -Quantity: 2 pieces -Price per piece -Dimension: Ø190 x 205 mm -Weight: 5.7 kg / piece

revolving point, revolving center point, revolving Morse taper, revolving center point, revolving lathe point, center point -Manufacturer: Stieber % Nebelmeier, revolving center point with adapter set unused -Types: RKN 3 DM 4-22 -Recording: MK3 / MK4 -Price / fee: complete -Dimension box: 270/180 / H65 mm -Weight: 3 kg

Reversible clamp, 4th axis, rotary table, rotary dividing table, controlled rotary table, dividing apparatus, dividing head, rotary indexing table Hydraulic rotary coupling -Manufacturer: Romheld, hydraulic reversible clamp with rotary coupling type 9284-826 908 -Number: 2x clamping unit available -Price per piece -Dimensions: 550/335/H400 mm -Weight: 90 kg/pc.

Reversible clamp, 4th axis, rotary table, rotary dividing table, controlled rotary table, dividing apparatus, dividing head, rotary indexing table Hydraulic rotary coupling -Manufacturer: Romheld, hydraulic reversible clamp with rotary coupling type 9284-003 711 -Number: 2x clamping unit available -Price per piece -Dimensions: 700/335/H430 mm -Weight: 113 kg/pc.